aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-u300/include
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-u300/include')
-rw-r--r--arch/arm/mach-u300/include/mach/entry-macro.S24
-rw-r--r--arch/arm/mach-u300/include/mach/gpio-u300.h115
-rw-r--r--arch/arm/mach-u300/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-u300/include/mach/memory.h19
-rw-r--r--arch/arm/mach-u300/include/mach/platform.h1
-rw-r--r--arch/arm/mach-u300/include/mach/system.h28
-rw-r--r--arch/arm/mach-u300/include/mach/vmalloc.h12
7 files changed, 2 insertions, 199 deletions
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
index 20731ae39d3..7181d6ac665 100644
--- a/arch/arm/mach-u300/include/mach/entry-macro.S
+++ b/arch/arm/mach-u300/include/mach/entry-macro.S
@@ -8,33 +8,9 @@
* Low-level IRQ helper macros for ST-Ericsson U300
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
-#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
- mov \irqnr, #0
- teq \irqstat, #0
- bne 1002f
-1001: ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
- mov \irqnr, #32
- teq \irqstat, #0
- beq 1003f
-1002: tst \irqstat, #1
- bne 1003f
- add \irqnr, \irqnr, #1
- movs \irqstat, \irqstat, lsr #1
- bne 1002b
-1003: /* EQ will be set if no irqs pending */
- .endm
diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h
index 0c2b2021951..bf4c7935aec 100644
--- a/arch/arm/mach-u300/include/mach/gpio-u300.h
+++ b/arch/arm/mach-u300/include/mach/gpio-u300.h
@@ -9,121 +9,6 @@
#ifndef __MACH_U300_GPIO_U300_H
#define __MACH_U300_GPIO_U300_H
-/*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
-#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP 4
-#define U300_GPIO_PIN_CAM_REG_EN 5
-#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
-#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
- * Notice that the actual usage of these pins depends on the
- * PAD MUX settings, that is why the same number can potentially
- * appear several times. In the reference design each pin is only
- * used for one purpose. These were determined by inspecting the
- * S365 schematic.
- */
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
- defined(CONFIG_MACH_U300_BS335)
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_UART_CTS 2
-#define U300_GPIO_PIN_UART_RTS 3
-#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
-#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
-#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
-#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
-#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
-#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
-#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
-#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
-#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
-#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
-#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
-#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
-#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
-#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
-#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
-#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
-#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
-#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
-#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
-#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
-#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
-#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
-#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
-#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
-
-#ifdef CONFIG_MACH_U300_BS335
-
-#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
-#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
-#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
-#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
-#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
-#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
-#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
-#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
-#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
-#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
-#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
-#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
-#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
-#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
-#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
-#endif
-
-#endif
-
/**
* enum u300_gpio_variant - the type of U300 GPIO employed
*/
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index db3fbfa1d6e..ee78a26707e 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -110,7 +110,7 @@
#endif
/* Maximum 8*7 GPIO lines */
-#ifdef CONFIG_GPIO_U300
+#ifdef CONFIG_PINCTRL_COH901
#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END)
#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56)
#else
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
deleted file mode 100644
index c808f347a08..00000000000
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/memory.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Memory virtual/physical mapping constants.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x48000000)
-#define BOOT_PARAMS_OFFSET 0x100
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h
index 77d9210a82e..096333f32fc 100644
--- a/arch/arm/mach-u300/include/mach/platform.h
+++ b/arch/arm/mach-u300/include/mach/platform.h
@@ -14,6 +14,7 @@
void u300_map_io(void);
void u300_init_irq(void);
void u300_init_devices(void);
+void u300_restart(char, const char *);
extern struct sys_timer u300_timer;
#endif
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
index 8daf13634ce..574d46e3829 100644
--- a/arch/arm/mach-u300/include/mach/system.h
+++ b/arch/arm/mach-u300/include/mach/system.h
@@ -8,35 +8,7 @@
* System shutdown and reset functions.
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <asm/hardware/vic.h>
-#include <asm/irq.h>
-
-/* Forward declare this function from the watchdog */
-void coh901327_watchdog_reset(void);
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static void arch_reset(char mode, const char *cmd)
-{
- switch (mode) {
- case 's':
- case 'h':
- printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
- /* Disable interrupts */
- local_irq_disable();
-#ifdef CONFIG_COH901327_WATCHDOG
- coh901327_watchdog_reset();
-#endif
- break;
- default:
- /* Do nothing */
- break;
- }
- /* Wait for system do die/reset. */
- while (1);
-}
diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h
deleted file mode 100644
index ec423b92b81..00000000000
--- a/arch/arm/mach-u300/include/mach/vmalloc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/vmalloc.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Virtual memory allocations
- * End must be above the I/O registers and on an even 2MiB boundary.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#define VMALLOC_END 0xfe800000UL