aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-omap4panda.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-omap4panda.c')
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c123
1 files changed, 32 insertions, 91 deletions
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index a8c2c4263e3..28fc271f703 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -30,14 +30,14 @@
#include <linux/wl12xx.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <video/omapdss.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-dvi.h>
@@ -51,8 +51,9 @@
#define GPIO_HUB_NRESET 62
#define GPIO_WIFI_PMENA 43
#define GPIO_WIFI_IRQ 53
-#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD 63 /* Hotplug detect */
/* wl127x BT, FM, GPS connectivity chip */
static int wl1271_gpios[] = {46, -1, -1};
@@ -364,74 +365,8 @@ static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
-static struct omap_device_pad serial2_pads[] __initdata = {
- OMAP_MUX_STATIC("uart2_cts.uart2_cts",
- OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_rts.uart2_rts",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_rx.uart2_rx",
- OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_tx.uart2_tx",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-};
-
-static struct omap_device_pad serial3_pads[] __initdata = {
- OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
- OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
- OMAP_PIN_INPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-};
-
-static struct omap_device_pad serial4_pads[] __initdata = {
- OMAP_MUX_STATIC("uart4_rx.uart4_rx",
- OMAP_PIN_INPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart4_tx.uart4_tx",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-};
-
-static struct omap_board_data serial2_data __initdata = {
- .id = 1,
- .pads = serial2_pads,
- .pads_cnt = ARRAY_SIZE(serial2_pads),
-};
-
-static struct omap_board_data serial3_data __initdata = {
- .id = 2,
- .pads = serial3_pads,
- .pads_cnt = ARRAY_SIZE(serial3_pads),
-};
-
-static struct omap_board_data serial4_data __initdata = {
- .id = 3,
- .pads = serial4_pads,
- .pads_cnt = ARRAY_SIZE(serial4_pads),
-};
-
-static inline void board_serial_init(void)
-{
- struct omap_board_data bdata;
- bdata.flags = 0;
- bdata.pads = NULL;
- bdata.pads_cnt = 0;
- bdata.id = 0;
- /* pass dummy data for UART1 */
- omap_serial_init_port(&bdata);
-
- omap_serial_init_port(&serial2_data);
- omap_serial_init_port(&serial3_data);
- omap_serial_init_port(&serial4_data);
-}
#else
#define board_mux NULL
-
-static inline void board_serial_init(void)
-{
- omap_serial_init();
-}
#endif
/* Display DVI */
@@ -478,24 +413,10 @@ int __init omap4_panda_dvi_init(void)
return r;
}
-
-static void omap4_panda_hdmi_mux_init(void)
-{
- /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
- omap_mux_init_signal("hdmi_hpd",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_cec",
- OMAP_PIN_INPUT_PULLUP);
- /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
- omap_mux_init_signal("hdmi_ddc_scl",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_sda",
- OMAP_PIN_INPUT_PULLUP);
-}
-
static struct gpio panda_hdmi_gpios[] = {
- { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
+ { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+ { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
};
static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
@@ -512,10 +433,13 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
- gpio_free(HDMI_GPIO_LS_OE);
- gpio_free(HDMI_GPIO_HPD);
+ gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
}
+static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+ .hpd_gpio = HDMI_GPIO_HPD,
+};
+
static struct omap_dss_device omap4_panda_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
@@ -523,6 +447,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = {
.platform_enable = omap4_panda_panel_enable_hdmi,
.platform_disable = omap4_panda_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
+ .data = &omap4_panda_hdmi_data,
};
static struct omap_dss_device *omap4_panda_dss_devices[] = {
@@ -544,25 +469,39 @@ void omap4_panda_display_init(void)
if (r)
pr_err("error initializing panda DVI\n");
- omap4_panda_hdmi_mux_init();
omap_display_init(&omap4_panda_dss_data);
+
+ /*
+ * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
+ * later have external pull up on the HDMI I2C lines
+ */
+ if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
+ omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
+ else
+ omap_hdmi_init(0);
+
+ omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
static void __init omap4_panda_init(void)
{
int package = OMAP_PACKAGE_CBS;
+ int ret;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
- if (wl12xx_set_platform_data(&omap_panda_wlan_data))
- pr_err("error setting wl12xx data\n");
+ ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
+ if (ret)
+ pr_err("error setting wl12xx data: %d\n", ret);
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
- board_serial_init();
+ omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
@@ -577,6 +516,8 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,
+ .restart = omap_prcm_restart,
MACHINE_END