aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-igep0020.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-igep0020.c')
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c28
1 files changed, 16 insertions, 12 deletions
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 7491529..0f24cb8 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -29,20 +29,19 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/board.h>
-#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/onenand.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
+#include "common.h"
+#include "gpmc.h"
#include "mux.h"
#include "hsmmc.h"
#include "sdram-numonyx-m65kxxxxam.h"
#include "common-board-devices.h"
#include "board-flash.h"
#include "control.h"
+#include "gpmc-onenand.h"
#define IGEP2_SMSC911X_CS 5
#define IGEP2_SMSC911X_GPIO 176
@@ -175,7 +174,7 @@ static void __init igep_flash_init(void)
pr_info("IGEP: initializing NAND memory device\n");
board_nand_init(igep_flash_partitions,
ARRAY_SIZE(igep_flash_partitions),
- 0, NAND_BUSWIDTH_16);
+ 0, NAND_BUSWIDTH_16, nand_default_timings);
} else if (mux == IGEP_SYSBOOT_ONENAND) {
pr_info("IGEP: initializing OneNAND memory device\n");
board_onenand_init(igep_flash_partitions,
@@ -192,7 +191,7 @@ static void __init igep_flash_init(void) {}
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
static struct omap_smsc911x_platform_data smsc911x_cfg = {
.cs = IGEP2_SMSC911X_CS,
@@ -425,9 +424,6 @@ static int igep_twl_gpio_setup(struct device *dev,
};
static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = igep_twl_gpio_setup,
};
@@ -554,6 +550,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
+ /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
+ OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
@@ -581,6 +579,11 @@ static void __init igep_wlan_bt_init(void)
} else
return;
+ /* Make sure that the GPIO pins are muxed correctly */
+ omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
err = gpio_request_array(igep_wlan_bt_gpios,
ARRAY_SIZE(igep_wlan_bt_gpios));
if (err) {
@@ -626,6 +629,7 @@ static void __init igep_init(void)
igep_flash_init();
igep_leds_init();
+ omap_twl4030_audio_init("igep2");
/*
* WLAN-BT combo module from MuRata which has a Marvell WLAN
@@ -652,7 +656,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
.init_machine = igep_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
@@ -665,5 +669,5 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
.init_machine = igep_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END