aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-cm-t35.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-cm-t35.c')
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c135
1 files changed, 108 insertions, 27 deletions
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index ded100c..b3102c2 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -23,6 +23,7 @@
#include <linux/input/matrix_keypad.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/twl.h>
@@ -37,22 +38,19 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
-#include "common.h"
-#include <plat/nand.h>
-#include <plat/gpmc.h>
-#include <plat/usb.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/mcspi.h>
-
-#include <mach/hardware.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include "common.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-nand.h"
#define CM_T35_GPIO_PENDOWN 57
#define SB_T35_USB_HUB_RESET_GPIO 167
@@ -64,7 +62,7 @@
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = {
.id = 0,
@@ -181,7 +179,7 @@ static struct omap_nand_platform_data cm_t35_nand_data = {
static void __init cm_t35_init_nand(void)
{
- if (gpmc_nand_init(&cm_t35_nand_data) < 0)
+ if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
pr_err("CM-T35: Unable to register NAND device\n");
}
#else
@@ -243,6 +241,7 @@ static struct omap_dss_device cm_t35_lcd_device = {
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = CM_T35_DVI_EN_GPIO,
+ .i2c_bus_num = -1,
};
static struct omap_dss_device cm_t35_dvi_device = {
@@ -470,9 +469,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
}
static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.setup = cm_t35_twl_gpio_setup,
};
@@ -490,6 +486,71 @@ static struct twl4030_platform_data cm_t35_twldata = {
.power = &cm_t35_power_data,
};
+#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+#include <media/omap3isp.h>
+#include "devices.h"
+
+static struct i2c_board_info cm_t35_isp_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("mt9t001", 0x5d),
+ },
+ {
+ I2C_BOARD_INFO("tvp5150", 0x5c),
+ },
+};
+
+static struct isp_subdev_i2c_board_info cm_t35_isp_primary_subdevs[] = {
+ {
+ .board_info = &cm_t35_isp_i2c_boardinfo[0],
+ .i2c_adapter_id = 3,
+ },
+ { NULL, 0, },
+};
+
+static struct isp_subdev_i2c_board_info cm_t35_isp_secondary_subdevs[] = {
+ {
+ .board_info = &cm_t35_isp_i2c_boardinfo[1],
+ .i2c_adapter_id = 3,
+ },
+ { NULL, 0, },
+};
+
+static struct isp_v4l2_subdevs_group cm_t35_isp_subdevs[] = {
+ {
+ .subdevs = cm_t35_isp_primary_subdevs,
+ .interface = ISP_INTERFACE_PARALLEL,
+ .bus = {
+ .parallel = {
+ .clk_pol = 1,
+ },
+ },
+ },
+ {
+ .subdevs = cm_t35_isp_secondary_subdevs,
+ .interface = ISP_INTERFACE_PARALLEL,
+ .bus = {
+ .parallel = {
+ .clk_pol = 0,
+ },
+ },
+ },
+ { NULL, 0, },
+};
+
+static struct isp_platform_data cm_t35_isp_pdata = {
+ .subdevs = cm_t35_isp_subdevs,
+};
+
+static void __init cm_t35_init_camera(void)
+{
+ if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
+ pr_warn("CM-T3x: Failed registering camera device!\n");
+}
+
+#else
+static inline void cm_t35_init_camera(void) {}
+#endif /* CONFIG_VIDEO_OMAP3 */
+
static void __init cm_t35_init_i2c(void)
{
omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
@@ -497,6 +558,8 @@ static void __init cm_t35_init_i2c(void)
TWL_COMMON_PDATA_AUDIO);
omap3_pmic_init("tps65930", &cm_t35_twldata);
+
+ omap_register_i2c_bus(3, 400, NULL, 0);
}
#ifdef CONFIG_OMAP_MUX
@@ -574,6 +637,27 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ /* Camera */
+ OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
+
/* display controls */
OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
@@ -626,13 +710,8 @@ static inline void cm_t35_init_mux(void) {}
static inline void cm_t3730_init_mux(void) {}
#endif
-static struct omap_board_config_kernel cm_t35_config[] __initdata = {
-};
-
static void __init cm_t3x_common_init(void)
{
- omap_board_config = cm_t35_config;
- omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
@@ -643,9 +722,11 @@ static void __init cm_t3x_common_init(void)
cm_t35_init_ethernet();
cm_t35_init_led();
cm_t35_init_display();
+ omap_twl4030_audio_init("cm-t3x");
usb_musb_init(NULL);
cm_t35_init_usbh();
+ cm_t35_init_camera();
}
static void __init cm_t35_init(void)
@@ -671,18 +752,18 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
.init_machine = cm_t35_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(CM_T3730, "Compulab CM-T3730")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap3630_init_early,
- .init_irq = omap3_init_irq,
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3630_init_early,
+ .init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
- .init_machine = cm_t3730_init,
+ .init_machine = cm_t3730_init,
.init_late = omap3630_init_late,
- .timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .timer = &omap3_timer,
+ .restart = omap3xxx_restart,
MACHINE_END