aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-mx5
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-mx5')
-rw-r--r--arch/arm/mach-mx5/Kconfig244
-rw-r--r--arch/arm/mach-mx5/Makefile26
-rw-r--r--arch/arm/mach-mx5/Makefile.boot9
-rw-r--r--arch/arm/mach-mx5/board-cpuimx51.c300
-rw-r--r--arch/arm/mach-mx5/board-cpuimx51sd.c338
-rw-r--r--arch/arm/mach-mx5/board-mx50_rdp.c225
-rw-r--r--arch/arm/mach-mx5/board-mx51_3ds.c178
-rw-r--r--arch/arm/mach-mx5/board-mx51_babbage.c429
-rw-r--r--arch/arm/mach-mx5/board-mx51_efikamx.c295
-rw-r--r--arch/arm/mach-mx5/board-mx51_efikasb.c290
-rw-r--r--arch/arm/mach-mx5/board-mx53_ard.c260
-rw-r--r--arch/arm/mach-mx5/board-mx53_evk.c178
-rw-r--r--arch/arm/mach-mx5/board-mx53_loco.c320
-rw-r--r--arch/arm/mach-mx5/board-mx53_smd.c167
-rw-r--r--arch/arm/mach-mx5/clock-mx51-mx53.c1673
-rw-r--r--arch/arm/mach-mx5/cpu.c186
-rw-r--r--arch/arm/mach-mx5/cpu_op-mx51.c29
-rw-r--r--arch/arm/mach-mx5/cpu_op-mx51.h14
-rw-r--r--arch/arm/mach-mx5/crm_regs.h600
-rw-r--r--arch/arm/mach-mx5/devices-imx50.h34
-rw-r--r--arch/arm/mach-mx5/devices-imx51.h71
-rw-r--r--arch/arm/mach-mx5/devices-imx53.h48
-rw-r--r--arch/arm/mach-mx5/efika.h10
-rw-r--r--arch/arm/mach-mx5/ehci.c156
-rw-r--r--arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c206
-rw-r--r--arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c146
-rw-r--r--arch/arm/mach-mx5/imx51-dt.c116
-rw-r--r--arch/arm/mach-mx5/imx53-dt.c126
-rw-r--r--arch/arm/mach-mx5/mm.c190
-rw-r--r--arch/arm/mach-mx5/mx51_efika.c632
-rw-r--r--arch/arm/mach-mx5/pm-imx5.c83
-rw-r--r--arch/arm/mach-mx5/system.c85
32 files changed, 0 insertions, 7664 deletions
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
deleted file mode 100644
index af0c212e3c7..00000000000
--- a/arch/arm/mach-mx5/Kconfig
+++ /dev/null
@@ -1,244 +0,0 @@
-if ARCH_MX5
-
-# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
-# image. So for most time, SOC_IMX50/51/53 should be used.
-
-config ARCH_MX51
- bool
-
-config ARCH_MX50
- bool
-
-config ARCH_MX53
- bool
-
-config SOC_IMX50
- bool
- select CPU_V7
- select ARM_L1_CACHE_SHIFT_6
- select MXC_TZIC
- select ARCH_MXC_IOMUX_V3
- select ARCH_MXC_AUDMUX_V2
- select ARCH_HAS_CPUFREQ
- select ARCH_MX50
-
-config SOC_IMX51
- bool
- select CPU_V7
- select ARM_L1_CACHE_SHIFT_6
- select MXC_TZIC
- select ARCH_MXC_IOMUX_V3
- select ARCH_MXC_AUDMUX_V2
- select ARCH_HAS_CPUFREQ
- select ARCH_MX51
-
-config SOC_IMX53
- bool
- select CPU_V7
- select ARM_L1_CACHE_SHIFT_6
- select MXC_TZIC
- select ARCH_MXC_IOMUX_V3
- select ARCH_MX53
-
-#comment "i.MX50 machines:"
-
-config MACH_MX50_RDP
- bool "Support MX50 reference design platform"
- depends on BROKEN
- select SOC_IMX50
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for MX50 reference design platform (RDP) board. This
- includes specific configurations for the board and its peripherals.
-
-comment "i.MX51 machines:"
-
-config MACH_IMX51_DT
- bool "Support i.MX51 platforms from device tree"
- select SOC_IMX51
- select USE_OF
- select MACH_MX51_BABBAGE
- help
- Include support for Freescale i.MX51 based platforms
- using the device tree for discovery
-
-config MACH_MX51_BABBAGE
- bool "Support MX51 BABBAGE platforms"
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for MX51 Babbage platform, also known as MX51EVK in
- u-boot. This includes specific configurations for the board and its
- peripherals.
-
-config MACH_MX51_3DS
- bool "Support MX51PDK (3DS)"
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_DEBUG_BOARD
- help
- Include support for MX51PDK (3DS) platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_EUKREA_CPUIMX51
- bool "Support Eukrea CPUIMX51 module"
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for Eukrea CPUIMX51 platform. This includes
- specific configurations for the module and its peripherals.
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX51
- default MACH_EUKREA_MBIMX51_BASEBOARD
-
-config MACH_EUKREA_MBIMX51_BASEBOARD
- prompt "Eukrea MBIMX51 development board"
- bool
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select LEDS_GPIO_REGISTER
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMX51 evaluation board.
-
-endchoice
-
-config MACH_EUKREA_CPUIMX51SD
- bool "Support Eukrea CPUIMX51SD module"
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for Eukrea CPUIMX51SD platform. This includes
- specific configurations for the module and its peripherals.
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX51SD
- default MACH_EUKREA_MBIMXSD51_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD51_BASEBOARD
- prompt "Eukrea MBIMXSD development board"
- bool
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select LEDS_GPIO_REGISTER
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMXSD evaluation board.
-
-endchoice
-
-config MX51_EFIKA_COMMON
- bool
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_PATA_IMX
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
-
-config MACH_MX51_EFIKAMX
- bool "Support MX51 Genesi Efika MX nettop"
- select LEDS_GPIO_REGISTER
- select MX51_EFIKA_COMMON
- help
- Include support for Genesi Efika MX nettop. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX51_EFIKASB
- bool "Support MX51 Genesi Efika Smartbook"
- select LEDS_GPIO_REGISTER
- select MX51_EFIKA_COMMON
- help
- Include support for Genesi Efika Smartbook. This includes specific
- configurations for the board and its peripherals.
-
-comment "i.MX53 machines:"
-
-config MACH_IMX53_DT
- bool "Support i.MX53 platforms from device tree"
- select SOC_IMX53
- select USE_OF
- select MACH_MX53_ARD
- select MACH_MX53_EVK
- select MACH_MX53_LOCO
- select MACH_MX53_SMD
- help
- Include support for Freescale i.MX53 based platforms
- using the device tree for discovery
-
-config MACH_MX53_EVK
- bool "Support MX53 EVK platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- help
- Include support for MX53 EVK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_SMD
- bool "Support MX53 SMD platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- help
- Include support for MX53 SMD platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_LOCO
- bool "Support MX53 LOCO platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select LEDS_GPIO_REGISTER
- help
- Include support for MX53 LOCO platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_ARD
- bool "Support MX53 ARD platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- help
- Include support for MX53 ARD platform. This includes specific
- configurations for the board and its peripherals.
-
-endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
deleted file mode 100644
index 0fc60807fa2..00000000000
--- a/arch/arm/mach-mx5/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-obj-y := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
-
-obj-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
-obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
-obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
-obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
-
-obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
deleted file mode 100644
index ca207ca305e..00000000000
--- a/arch/arm/mach-mx5/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
- zreladdr-$(CONFIG_ARCH_MX50) += 0x70008000
-params_phys-$(CONFIG_ARCH_MX50) := 0x70000100
-initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000
- zreladdr-$(CONFIG_ARCH_MX51) += 0x90008000
-params_phys-$(CONFIG_ARCH_MX51) := 0x90000100
-initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000
- zreladdr-$(CONFIG_ARCH_MX53) += 0x70008000
-params_phys-$(CONFIG_ARCH_MX53) := 0x70000100
-initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
deleted file mode 100644
index 1fc11034804..00000000000
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-
-#define CPUIMX51_USBH1_STP IMX_GPIO_NR(1, 27)
-#define CPUIMX51_QUARTA_GPIO IMX_GPIO_NR(3, 28)
-#define CPUIMX51_QUARTB_GPIO IMX_GPIO_NR(3, 25)
-#define CPUIMX51_QUARTC_GPIO IMX_GPIO_NR(3, 26)
-#define CPUIMX51_QUARTD_GPIO IMX_GPIO_NR(3, 27)
-#define CPUIMX51_QUART_XTAL 14745600
-#define CPUIMX51_QUART_REGSHIFT 17
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET 0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-
-#define MX51_USB_PLLDIV_12_MHZ 0x00
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
-#define MX51_USB_PLL_DIV_24_MHZ 0x02
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
- .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
- .irqflags = IRQF_TRIGGER_HIGH,
- .uartclk = CPUIMX51_QUART_XTAL,
- .regshift = CPUIMX51_QUART_REGSHIFT,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
- }, {
- .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
- .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
- .irqflags = IRQF_TRIGGER_HIGH,
- .uartclk = CPUIMX51_QUART_XTAL,
- .regshift = CPUIMX51_QUART_REGSHIFT,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
- }, {
- .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
- .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
- .irqflags = IRQF_TRIGGER_HIGH,
- .uartclk = CPUIMX51_QUART_XTAL,
- .regshift = CPUIMX51_QUART_REGSHIFT,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
- }, {
- .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
- .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
- .irqflags = IRQF_TRIGGER_HIGH,
- .uartclk = CPUIMX51_QUART_XTAL,
- .regshift = CPUIMX51_QUART_REGSHIFT,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
- }, {
- }
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = 0,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct platform_device *devices[] __initdata = {
- &serial_device,
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* I2C2 */
- MX51_PAD_GPIO1_2__I2C2_SCL,
- MX51_PAD_GPIO1_3__I2C2_SDA,
- MX51_PAD_NANDF_D10__GPIO3_30,
-
- /* QUART IRQ */
- MX51_PAD_NANDF_D15__GPIO3_25,
- MX51_PAD_NANDF_D14__GPIO3_26,
- MX51_PAD_NANDF_D13__GPIO3_27,
- MX51_PAD_NANDF_D12__GPIO3_28,
-
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
- MX51_PAD_USBH1_STP__USBH1_STP,
-};
-
-static const struct mxc_nand_platform_data
- eukrea_cpuimx51_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const
-struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* Set the PHY clock to 19.2MHz */
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- v |= MX51_USB_PLL_DIV_19_2_MHZ;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* The clock for the USBH1 ULPI port will come externally from the PHY. */
- v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
- __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
- .init = initialize_otg_port,
- .portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
- .init = initialize_usbh1_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx51_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = 1;
- else if (!strcmp(options, "device"))
- otg_mode_host = 0;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx51_otg_mode);
-
-/*
- * Board specific initialization.
- */
-static void __init eukrea_cpuimx51_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
- ARRAY_SIZE(eukrea_cpuimx51_pads));
-
- imx51_add_imx_uart(0, &uart_pdata);
- imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info);
-
- gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
- gpio_direction_input(CPUIMX51_QUARTA_GPIO);
- gpio_free(CPUIMX51_QUARTA_GPIO);
- gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
- gpio_direction_input(CPUIMX51_QUARTB_GPIO);
- gpio_free(CPUIMX51_QUARTB_GPIO);
- gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
- gpio_direction_input(CPUIMX51_QUARTC_GPIO);
- gpio_free(CPUIMX51_QUARTC_GPIO);
- gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
- gpio_direction_input(CPUIMX51_QUARTD_GPIO);
- gpio_free(CPUIMX51_QUARTD_GPIO);
-
- imx51_add_fec(NULL);
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
- i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
- ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
-
- if (otg_mode_host)
- imx51_add_mxc_ehci_otg(&dr_utmi_config);
- else {
- initialize_otg_port(NULL);
- imx51_add_fsl_usb2_udc(&usb_pdata);
- }
- imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
- eukrea_mbimx51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mxc_timer = {
- .init = eukrea_cpuimx51_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
- /* Maintainer: Eric Bénard <eric@eukrea.com> */
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .timer = &mxc_timer,
- .init_machine = eukrea_cpuimx51_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
deleted file mode 100644
index 52a11c1898e..00000000000
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/i2c-gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/can/platform/mcp251x.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "cpu_op-mx51.h"
-
-#define USBH1_RST IMX_GPIO_NR(2, 28)
-#define ETH_RST IMX_GPIO_NR(2, 31)
-#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 12)
-#define CAN_IRQGPIO IMX_GPIO_NR(1, 1)
-#define CAN_RST IMX_GPIO_NR(4, 15)
-#define CAN_NCS IMX_GPIO_NR(4, 24)
-#define CAN_RXOBF IMX_GPIO_NR(1, 4)
-#define CAN_RX1BF IMX_GPIO_NR(1, 6)
-#define CAN_TXORTS IMX_GPIO_NR(1, 7)
-#define CAN_TX1RTS IMX_GPIO_NR(1, 8)
-#define CAN_TX2RTS IMX_GPIO_NR(1, 9)
-#define I2C_SCL IMX_GPIO_NR(4, 16)
-#define I2C_SDA IMX_GPIO_NR(4, 17)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET 0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-
-#define MX51_USB_PLLDIV_12_MHZ 0x00
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
-#define MX51_USB_PLL_DIV_24_MHZ 0x02
-
-static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
- MX51_PAD_USBH1_STP__USBH1_STP,
- MX51_PAD_EIM_CS3__GPIO2_28, /* PHY nRESET */
-
- /* FEC */
- MX51_PAD_EIM_DTACK__GPIO2_31, /* PHY nRESET */
-
- /* HSI2C */
- MX51_PAD_I2C1_CLK__GPIO4_16,
- MX51_PAD_I2C1_DAT__GPIO4_17,
-
- /* CAN */
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_CSPI1_SS0__GPIO4_24, /* nCS */
- MX51_PAD_CSI2_PIXCLK__GPIO4_15, /* nReset */
- MX51_PAD_GPIO1_1__GPIO1_1, /* IRQ */
- MX51_PAD_GPIO1_4__GPIO1_4, /* Control signals */
- MX51_PAD_GPIO1_6__GPIO1_6,
- MX51_PAD_GPIO1_7__GPIO1_7,
- MX51_PAD_GPIO1_8__GPIO1_8,
- MX51_PAD_GPIO1_9__GPIO1_9,
-
- /* Touchscreen */
- /* IRQ */
- NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct tsc2007_platform_data tsc2007_info = {
- .model = 2007,
- .x_plate_ohms = 180,
-};
-
-static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }, {
- I2C_BOARD_INFO("tsc2007", 0x49),
- .type = "tsc2007",
- .platform_data = &tsc2007_info,
- .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
- },
-};
-
-static const struct mxc_nand_platform_data
- eukrea_cpuimx51sd_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* Set the PHY clock to 19.2MHz */
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- v |= MX51_USB_PLL_DIV_19_2_MHZ;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* The clock for the USBH1 ULPI port will come from the PHY. */
- v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
- __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
- usbother_base + MX51_USB_CTRL_1_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
- .init = initialize_otg_port,
- .portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
- .init = initialize_usbh1_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx51sd_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = 1;
- else if (!strcmp(options, "device"))
- otg_mode_host = 0;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = I2C_SDA,
- .sda_is_open_drain = 0,
- .scl_pin = I2C_SCL,
- .scl_is_open_drain = 0,
- .udelay = 2,
-};
-
-static struct platform_device hsi2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata,
-};
-
-static struct mcp251x_platform_data mcp251x_info = {
- .oscillator_frequency = 24E6,
-};
-
-static struct spi_board_info cpuimx51sd_spi_device[] = {
- {
- .modalias = "mcp2515",
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .mode = SPI_MODE_0,
- .chip_select = 0,
- .platform_data = &mcp251x_info,
- .irq = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
- },
-};
-
-static int cpuimx51sd_spi1_cs[] = {
- CAN_NCS,
-};
-
-static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
- .chipselect = cpuimx51sd_spi1_cs,
- .num_chipselect = ARRAY_SIZE(cpuimx51sd_spi1_cs),
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &hsi2c_gpio_device,
-};
-
-static void __init eukrea_cpuimx51sd_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
- ARRAY_SIZE(eukrea_cpuimx51sd_pads));
-
-#if defined(CONFIG_CPU_FREQ_IMX)
- get_cpu_op = mx51_get_cpu_op;
-#endif
-
- imx51_add_imx_uart(0, &uart_pdata);
- imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
-
- gpio_request(ETH_RST, "eth_rst");
- gpio_set_value(ETH_RST, 1);
- imx51_add_fec(NULL);
-
- gpio_request(CAN_IRQGPIO, "can_irq");
- gpio_direction_input(CAN_IRQGPIO);
- gpio_free(CAN_IRQGPIO);
- gpio_request(CAN_NCS, "can_ncs");
- gpio_direction_output(CAN_NCS, 1);
- gpio_free(CAN_NCS);
- gpio_request(CAN_RST, "can_rst");
- gpio_direction_output(CAN_RST, 0);
- msleep(20);
- gpio_set_value(CAN_RST, 1);
- imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
- spi_register_board_info(cpuimx51sd_spi_device,
- ARRAY_SIZE(cpuimx51sd_spi_device));
-
- gpio_request(TSC2007_IRQGPIO, "tsc2007_irq");
- gpio_direction_input(TSC2007_IRQGPIO);
- gpio_free(TSC2007_IRQGPIO);
-
- i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
- ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
- if (otg_mode_host)
- imx51_add_mxc_ehci_otg(&dr_utmi_config);
- else {
- initialize_otg_port(NULL);
- imx51_add_fsl_usb2_udc(&usb_pdata);
- }
-
- gpio_request(USBH1_RST, "usb_rst");
- gpio_direction_output(USBH1_RST, 0);
- msleep(20);
- gpio_set_value(USBH1_RST, 1);
- imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
- eukrea_mbimxsd51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51sd_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mxc_timer = {
- .init = eukrea_cpuimx51sd_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
- /* Maintainer: Eric Bénard <eric@eukrea.com> */
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .timer = &mxc_timer,
- .init_machine = eukrea_cpuimx51sd_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
deleted file mode 100644
index fc3621d90bd..00000000000
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx50.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx50.h"
-
-#define FEC_EN IMX_GPIO_NR(6, 23)
-#define FEC_RESET_B IMX_GPIO_NR(4, 12)
-
-static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = {
- /* SD1 */
- MX50_PAD_ECSPI2_SS0__GPIO_4_19,
- MX50_PAD_EIM_CRE__GPIO_1_27,
- MX50_PAD_SD1_CMD__SD1_CMD,
-
- MX50_PAD_SD1_CLK__SD1_CLK,
- MX50_PAD_SD1_D0__SD1_D0,
- MX50_PAD_SD1_D1__SD1_D1,
- MX50_PAD_SD1_D2__SD1_D2,
- MX50_PAD_SD1_D3__SD1_D3,
-
- /* SD2 */
- MX50_PAD_SD2_CD__GPIO_5_17,
- MX50_PAD_SD2_WP__GPIO_5_16,
- MX50_PAD_SD2_CMD__SD2_CMD,
- MX50_PAD_SD2_CLK__SD2_CLK,
- MX50_PAD_SD2_D0__SD2_D0,
- MX50_PAD_SD2_D1__SD2_D1,
- MX50_PAD_SD2_D2__SD2_D2,
- MX50_PAD_SD2_D3__SD2_D3,
- MX50_PAD_SD2_D4__SD2_D4,
- MX50_PAD_SD2_D5__SD2_D5,
- MX50_PAD_SD2_D6__SD2_D6,
- MX50_PAD_SD2_D7__SD2_D7,
-
- /* SD3 */
- MX50_PAD_SD3_CMD__SD3_CMD,
- MX50_PAD_SD3_CLK__SD3_CLK,
- MX50_PAD_SD3_D0__SD3_D0,
- MX50_PAD_SD3_D1__SD3_D1,
- MX50_PAD_SD3_D2__SD3_D2,
- MX50_PAD_SD3_D3__SD3_D3,
- MX50_PAD_SD3_D4__SD3_D4,
- MX50_PAD_SD3_D5__SD3_D5,
- MX50_PAD_SD3_D6__SD3_D6,
- MX50_PAD_SD3_D7__SD3_D7,
-
- /* PWR_INT */
- MX50_PAD_ECSPI2_MISO__GPIO_4_18,
-
- /* UART pad setting */
- MX50_PAD_UART1_TXD__UART1_TXD,
- MX50_PAD_UART1_RXD__UART1_RXD,
- MX50_PAD_UART1_RTS__UART1_RTS,
- MX50_PAD_UART2_TXD__UART2_TXD,
- MX50_PAD_UART2_RXD__UART2_RXD,
- MX50_PAD_UART2_CTS__UART2_CTS,
- MX50_PAD_UART2_RTS__UART2_RTS,
-
- MX50_PAD_I2C1_SCL__I2C1_SCL,
- MX50_PAD_I2C1_SDA__I2C1_SDA,
- MX50_PAD_I2C2_SCL__I2C2_SCL,
- MX50_PAD_I2C2_SDA__I2C2_SDA,
-
- MX50_PAD_EPITO__USBH1_PWR,
- /* Need to comment below line if
- * one needs to debug owire.
- */
- MX50_PAD_OWIRE__USBH1_OC,
- /* using gpio to control otg pwr */
- MX50_PAD_PWM2__GPIO_6_25,
- MX50_PAD_I2C3_SCL__USBOTG_OC,
-
- MX50_PAD_SSI_RXC__FEC_MDIO,
- MX50_PAD_SSI_RXFS__FEC_MDC,
- MX50_PAD_DISP_D0__FEC_TXCLK,
- MX50_PAD_DISP_D1__FEC_RX_ER,
- MX50_PAD_DISP_D2__FEC_RX_DV,
- MX50_PAD_DISP_D3__FEC_RXD1,
- MX50_PAD_DISP_D4__FEC_RXD0,
- MX50_PAD_DISP_D5__FEC_TX_EN,
- MX50_PAD_DISP_D6__FEC_TXD1,
- MX50_PAD_DISP_D7__FEC_TXD0,
- MX50_PAD_I2C3_SDA__GPIO_6_23,
- MX50_PAD_ECSPI1_SCLK__GPIO_4_12,
-
- MX50_PAD_CSPI_SS0__CSPI_SS0,
- MX50_PAD_ECSPI1_MOSI__CSPI_SS1,
- MX50_PAD_CSPI_MOSI__CSPI_MOSI,
- MX50_PAD_CSPI_MISO__CSPI_MISO,
-
- /* SGTL500_OSC_EN */
- MX50_PAD_UART1_CTS__GPIO_6_8,
-
- /* SGTL_AMP_SHDN */
- MX50_PAD_UART3_RXD__GPIO_6_15,
-
- /* Keypad */
- MX50_PAD_KEY_COL0__KEY_COL0,
- MX50_PAD_KEY_ROW0__KEY_ROW0,
- MX50_PAD_KEY_COL1__KEY_COL1,
- MX50_PAD_KEY_ROW1__KEY_ROW1,
- MX50_PAD_KEY_COL2__KEY_COL2,
- MX50_PAD_KEY_ROW2__KEY_ROW2,
- MX50_PAD_KEY_COL3__KEY_COL3,
- MX50_PAD_KEY_ROW3__KEY_ROW3,
- MX50_PAD_EIM_DA0__KEY_COL4,
- MX50_PAD_EIM_DA1__KEY_ROW4,
- MX50_PAD_EIM_DA2__KEY_COL5,
- MX50_PAD_EIM_DA3__KEY_ROW5,
- MX50_PAD_EIM_DA4__KEY_COL6,
- MX50_PAD_EIM_DA5__KEY_ROW6,
- MX50_PAD_EIM_DA6__KEY_COL7,
- MX50_PAD_EIM_DA7__KEY_ROW7,
- /*EIM pads */
- MX50_PAD_EIM_DA8__GPIO_1_8,
- MX50_PAD_EIM_DA9__GPIO_1_9,
- MX50_PAD_EIM_DA10__GPIO_1_10,
- MX50_PAD_EIM_DA11__GPIO_1_11,
- MX50_PAD_EIM_DA12__GPIO_1_12,
- MX50_PAD_EIM_DA13__GPIO_1_13,
- MX50_PAD_EIM_DA14__GPIO_1_14,
- MX50_PAD_EIM_DA15__GPIO_1_15,
- MX50_PAD_EIM_CS2__GPIO_1_16,
- MX50_PAD_EIM_CS1__GPIO_1_17,
- MX50_PAD_EIM_CS0__GPIO_1_18,
- MX50_PAD_EIM_EB0__GPIO_1_19,
- MX50_PAD_EIM_EB1__GPIO_1_20,
- MX50_PAD_EIM_WAIT__GPIO_1_21,
- MX50_PAD_EIM_BCLK__GPIO_1_22,
- MX50_PAD_EIM_RDY__GPIO_1_23,
- MX50_PAD_EIM_OE__GPIO_1_24,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct fec_platform_data fec_data __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static inline void mx50_rdp_fec_reset(void)
-{
- gpio_request(FEC_EN, "fec-en");
- gpio_direction_output(FEC_EN, 0);
- gpio_request(FEC_RESET_B, "fec-reset_b");
- gpio_direction_output(FEC_RESET_B, 0);
- msleep(1);
- gpio_set_value(FEC_RESET_B, 1);
-}
-
-static const struct imxi2c_platform_data i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx50_rdp_board_init(void)
-{
- imx50_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
- ARRAY_SIZE(mx50_rdp_pads));
-
- imx50_add_imx_uart(0, &uart_pdata);
- imx50_add_imx_uart(1, &uart_pdata);
- mx50_rdp_fec_reset();
- imx50_add_fec(&fec_data);
- imx50_add_imx_i2c(0, &i2c_data);
- imx50_add_imx_i2c(1, &i2c_data);
- imx50_add_imx_i2c(2, &i2c_data);
-}
-
-static void __init mx50_rdp_timer_init(void)
-{
- mx50_clocks_init(32768, 24000000, 22579200);
-}
-
-static struct sys_timer mx50_rdp_timer = {
- .init = mx50_rdp_timer_init,
-};
-
-MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
- .map_io = mx50_map_io,
- .init_early = imx50_init_early,
- .init_irq = mx50_init_irq,
- .handle_irq = imx50_handle_irq,
- .timer = &mx50_rdp_timer,
- .init_machine = mx50_rdp_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
deleted file mode 100644
index 05783906db2..00000000000
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx51.h>
-#include <mach/3ds_debugboard.h>
-
-#include "devices-imx51.h"
-
-#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 6))
-#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
-
-static iomux_v3_cfg_t mx51_3ds_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* UART2 */
- MX51_PAD_UART2_RXD__UART2_RXD,
- MX51_PAD_UART2_TXD__UART2_TXD,
- MX51_PAD_EIM_D25__UART2_CTS,
- MX51_PAD_EIM_D26__UART2_RTS,
-
- /* UART3 */
- MX51_PAD_UART3_RXD__UART3_RXD,
- MX51_PAD_UART3_TXD__UART3_TXD,
- MX51_PAD_EIM_D24__UART3_CTS,
- MX51_PAD_EIM_D27__UART3_RTS,
-
- /* CPLD PARENT IRQ PIN */
- MX51_PAD_GPIO1_6__GPIO1_6,
-
- /* KPP */
- MX51_PAD_KEY_ROW0__KEY_ROW0,
- MX51_PAD_KEY_ROW1__KEY_ROW1,
- MX51_PAD_KEY_ROW2__KEY_ROW2,
- MX51_PAD_KEY_ROW3__KEY_ROW3,
- MX51_PAD_KEY_COL0__KEY_COL0,
- MX51_PAD_KEY_COL1__KEY_COL1,
- MX51_PAD_KEY_COL2__KEY_COL2,
- MX51_PAD_KEY_COL3__KEY_COL3,
- MX51_PAD_KEY_COL4__KEY_COL4,
- MX51_PAD_KEY_COL5__KEY_COL5,
-
- /* eCSPI2 */
- MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
- MX51_PAD_NANDF_RB3__ECSPI2_MISO,
- MX51_PAD_NANDF_D15__ECSPI2_MOSI,
- MX51_PAD_NANDF_D12__GPIO3_28,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int mx51_3ds_board_keymap[] = {
- KEY(0, 0, KEY_1),
- KEY(0, 1, KEY_2),
- KEY(0, 2, KEY_3),
- KEY(0, 3, KEY_F1),
- KEY(0, 4, KEY_UP),
- KEY(0, 5, KEY_F2),
-
- KEY(1, 0, KEY_4),
- KEY(1, 1, KEY_5),
- KEY(1, 2, KEY_6),
- KEY(1, 3, KEY_LEFT),
- KEY(1, 4, KEY_SELECT),
- KEY(1, 5, KEY_RIGHT),
-
- KEY(2, 0, KEY_7),
- KEY(2, 1, KEY_8),
- KEY(2, 2, KEY_9),
- KEY(2, 3, KEY_F3),
- KEY(2, 4, KEY_DOWN),
- KEY(2, 5, KEY_F4),
-
- KEY(3, 0, KEY_0),
- KEY(3, 1, KEY_OK),
- KEY(3, 2, KEY_ESC),
- KEY(3, 3, KEY_ENTER),
- KEY(3, 4, KEY_MENU),
- KEY(3, 5, KEY_BACK)
-};
-
-static const struct matrix_keymap_data mx51_3ds_map_data __initconst = {
- .keymap = mx51_3ds_board_keymap,
- .keymap_size = ARRAY_SIZE(mx51_3ds_board_keymap),
-};
-
-static int mx51_3ds_spi2_cs[] = {
- MXC_SPI_CS(0),
- MX51_3DS_ECSPI2_CS,
-};
-
-static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = {
- .chipselect = mx51_3ds_spi2_cs,
- .num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs),
-};
-
-static struct spi_board_info mx51_3ds_spi_nor_device[] = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- .platform_data = NULL,},
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_3ds_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
- ARRAY_SIZE(mx51_3ds_pads));
-
- imx51_add_imx_uart(0, &uart_pdata);
- imx51_add_imx_uart(1, &uart_pdata);
- imx51_add_imx_uart(2, &uart_pdata);
-
- imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
- spi_register_board_info(mx51_3ds_spi_nor_device,
- ARRAY_SIZE(mx51_3ds_spi_nor_device));
-
- if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
- printk(KERN_WARNING "Init of the debugboard failed, all "
- "devices on the board are unusable.\n");
-
- imx51_add_sdhci_esdhc_imx(0, NULL);
- imx51_add_imx_keypad(&mx51_3ds_map_data);
- imx51_add_imx2_wdt(0, NULL);
-}
-
-static void __init mx51_3ds_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx51_3ds_timer = {
- .init = mx51_3ds_timer_init,
-};
-
-MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .timer = &mx51_3ds_timer,
- .init_machine = mx51_3ds_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
deleted file mode 100644
index 5c837603ff0..00000000000
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "cpu_op-mx51.h"
-
-#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7)
-#define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27)
-#define BABBAGE_USB_PHY_RESET IMX_GPIO_NR(2, 5)
-#define BABBAGE_FEC_PHY_RESET IMX_GPIO_NR(2, 14)
-#define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21)
-#define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24)
-#define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25)
-#define BABBAGE_SD2_CD IMX_GPIO_NR(1, 6)
-#define BABBAGE_SD2_WP IMX_GPIO_NR(1, 5)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET 0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-
-#define MX51_USB_PLLDIV_12_MHZ 0x00
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
-#define MX51_USB_PLL_DIV_24_MHZ 0x02
-
-static struct gpio_keys_button babbage_buttons[] = {
- {
- .gpio = BABBAGE_POWER_KEY,
- .code = BTN_0,
- .desc = "PWR",
- .active_low = 1,
- .wakeup = 1,
- },
-};
-
-static const struct gpio_keys_platform_data imx_button_data __initconst = {
- .buttons = babbage_buttons,
- .nbuttons = ARRAY_SIZE(babbage_buttons),
-};
-
-static iomux_v3_cfg_t mx51babbage_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* UART2 */
- MX51_PAD_UART2_RXD__UART2_RXD,
- MX51_PAD_UART2_TXD__UART2_TXD,
-
- /* UART3 */
- MX51_PAD_EIM_D25__UART3_RXD,
- MX51_PAD_EIM_D26__UART3_TXD,
- MX51_PAD_EIM_D27__UART3_RTS,
- MX51_PAD_EIM_D24__UART3_CTS,
-
- /* I2C1 */
- MX51_PAD_EIM_D16__I2C1_SDA,
- MX51_PAD_EIM_D19__I2C1_SCL,
-
- /* I2C2 */
- MX51_PAD_KEY_COL4__I2C2_SCL,
- MX51_PAD_KEY_COL5__I2C2_SDA,
-
- /* HSI2C */
- MX51_PAD_I2C1_CLK__I2C1_CLK,
- MX51_PAD_I2C1_DAT__I2C1_DAT,
-
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
- /* USB HUB reset line*/
- MX51_PAD_GPIO1_7__GPIO1_7,
-
- /* USB PHY reset line */
- MX51_PAD_EIM_D21__GPIO2_5,
-
- /* FEC */
- MX51_PAD_EIM_EB2__FEC_MDIO,
- MX51_PAD_EIM_EB3__FEC_RDATA1,
- MX51_PAD_EIM_CS2__FEC_RDATA2,
- MX51_PAD_EIM_CS3__FEC_RDATA3,
- MX51_PAD_EIM_CS4__FEC_RX_ER,
- MX51_PAD_EIM_CS5__FEC_CRS,
- MX51_PAD_NANDF_RB2__FEC_COL,
- MX51_PAD_NANDF_RB3__FEC_RX_CLK,
- MX51_PAD_NANDF_D9__FEC_RDATA0,
- MX51_PAD_NANDF_D8__FEC_TDATA0,
- MX51_PAD_NANDF_CS2__FEC_TX_ER,
- MX51_PAD_NANDF_CS3__FEC_MDC,
- MX51_PAD_NANDF_CS4__FEC_TDATA1,
- MX51_PAD_NANDF_CS5__FEC_TDATA2,
- MX51_PAD_NANDF_CS6__FEC_TDATA3,
- MX51_PAD_NANDF_CS7__FEC_TX_EN,
- MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
-
- /* FEC PHY reset line */
- MX51_PAD_EIM_A20__GPIO2_14,
-
- /* SD 1 */
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
- /* CD/WP from controller */
- MX51_PAD_GPIO1_0__SD1_CD,
- MX51_PAD_GPIO1_1__SD1_WP,
-
- /* SD 2 */
- MX51_PAD_SD2_CMD__SD2_CMD,
- MX51_PAD_SD2_CLK__SD2_CLK,
- MX51_PAD_SD2_DATA0__SD2_DATA0,
- MX51_PAD_SD2_DATA1__SD2_DATA1,
- MX51_PAD_SD2_DATA2__SD2_DATA2,
- MX51_PAD_SD2_DATA3__SD2_DATA3,
- /* CD/WP gpio */
- MX51_PAD_GPIO1_6__GPIO1_6,
- MX51_PAD_GPIO1_5__GPIO1_5,
-
- /* eCSPI1 */
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_CSPI1_SS0__GPIO4_24,
- MX51_PAD_CSPI1_SS1__GPIO4_25,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = {
- .bitrate = 400000,
-};
-
-static struct gpio mx51_babbage_usbh1_gpios[] = {
- { BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" },
- { BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" },
-};
-
-static int gpio_usbh1_active(void)
-{
- iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
- int ret;
-
- /* Set USBH1_STP to GPIO and toggle it */
- mxc_iomux_v3_setup_pad(usbh1stp_gpio);
- ret = gpio_request_array(mx51_babbage_usbh1_gpios,
- ARRAY_SIZE(mx51_babbage_usbh1_gpios));
-
- if (ret) {
- pr_debug("failed to get USBH1 pins: %d\n", ret);
- return ret;
- }
-
- msleep(100);
- gpio_set_value(BABBAGE_USBH1_STP, 1);
- gpio_set_value(BABBAGE_USB_PHY_RESET, 1);
- gpio_free_array(mx51_babbage_usbh1_gpios,
- ARRAY_SIZE(mx51_babbage_usbh1_gpios));
- return 0;
-}
-
-static inline void babbage_usbhub_reset(void)
-{
- int ret;
-
- /* Reset USB hub */
- ret = gpio_request_one(BABBAGE_USB_HUB_RESET,
- GPIOF_OUT_INIT_LOW, "GPIO1_7");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
- return;
- }
-
- msleep(2);
- /* Deassert reset */
- gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
-}
-
-static inline void babbage_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
- GPIOF_OUT_INIT_LOW, "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- msleep(1);
- gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
-}
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* Set the PHY clock to 19.2MHz */
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- v |= MX51_USB_PLL_DIV_19_2_MHZ;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* The clock for the USBH1 ULPI port will come externally from the PHY. */
- v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
- __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
- .init = initialize_otg_port,
- .portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
- .init = initialize_usbh1_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init babbage_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = 1;
- else if (!strcmp(options, "device"))
- otg_mode_host = 0;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 0;
-}
-__setup("otg_mode=", babbage_otg_mode);
-
-static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = {
- {
- .modalias = "mtd_dataflash",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- .platform_data = NULL,
- },
-};
-
-static int mx51_babbage_spi_cs[] = {
- BABBAGE_ECSPI1_CS0,
- BABBAGE_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
- .chipselect = mx51_babbage_spi_cs,
- .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = {
- .cd_type = ESDHC_CD_CONTROLLER,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
- .cd_gpio = BABBAGE_SD2_CD,
- .wp_gpio = BABBAGE_SD2_WP,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_GPIO,
-};
-
-void __init imx51_babbage_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
- ARRAY_SIZE(mx51babbage_pads));
-}
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_babbage_init(void)
-{
- iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
- iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
- PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
-
- imx51_soc_init();
-
-#if defined(CONFIG_CPU_FREQ_IMX)
- get_cpu_op = mx51_get_cpu_op;
-#endif
- imx51_babbage_common_init();
-
- imx51_add_imx_uart(0, &uart_pdata);
- imx51_add_imx_uart(1, NULL);
- imx51_add_imx_uart(2, &uart_pdata);
-
- babbage_fec_reset();
- imx51_add_fec(NULL);
-
- /* Set the PAD settings for the pwr key. */
- mxc_iomux_v3_setup_pad(power_key);
- imx_add_gpio_keys(&imx_button_data);
-
- imx51_add_imx_i2c(0, &babbage_i2c_data);
- imx51_add_imx_i2c(1, &babbage_i2c_data);
- imx51_add_hsi2c(&babbage_hsi2c_data);
-
- if (otg_mode_host)
- imx51_add_mxc_ehci_otg(&dr_utmi_config);
- else {
- initialize_otg_port(NULL);
- imx51_add_fsl_usb2_udc(&usb_pdata);
- }
-
- gpio_usbh1_active();
- imx51_add_mxc_ehci_hs(1, &usbh1_config);
- /* setback USBH1_STP to be function */
- mxc_iomux_v3_setup_pad(usbh1stp);
- babbage_usbhub_reset();
-
- imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data);
- imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data);
-
- spi_register_board_info(mx51_babbage_spi_board_info,
- ARRAY_SIZE(mx51_babbage_spi_board_info));
- imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
- imx51_add_imx2_wdt(0, NULL);
-}
-
-static void __init mx51_babbage_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx51_babbage_timer = {
- .init = mx51_babbage_timer_init,
-};
-
-MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
- /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .timer = &mx51_babbage_timer,
- .init_machine = mx51_babbage_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
deleted file mode 100644
index a9e48662cf7..00000000000
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Copyright (C) 2010 Linaro Limited
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16)
-#define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17)
-#define EFIKAMX_PCBID2 IMX_GPIO_NR(3, 11)
-
-#define EFIKAMX_BLUE_LED IMX_GPIO_NR(3, 13)
-#define EFIKAMX_GREEN_LED IMX_GPIO_NR(3, 14)
-#define EFIKAMX_RED_LED IMX_GPIO_NR(3, 15)
-
-#define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31)
-
-/* board 1.1 doesn't have same reset gpio */
-#define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2)
-#define EFIKAMX_RESET IMX_GPIO_NR(1, 4)
-
-#define EFIKAMX_POWEROFF IMX_GPIO_NR(4, 13)
-
-#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
-
-/* the pci ids pin have pull up. they're driven low according to board id */
-#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-
-static iomux_v3_cfg_t mx51efikamx_pads[] = {
- /* board id */
- MX51_PAD_PCBID0,
- MX51_PAD_PCBID1,
- MX51_PAD_PCBID2,
-
- /* leds */
- MX51_PAD_CSI1_D9__GPIO3_13,
- MX51_PAD_CSI1_VSYNC__GPIO3_14,
- MX51_PAD_CSI1_HSYNC__GPIO3_15,
-
- /* power key */
- MX51_PAD_PWRKEY,
-
- /* reset */
- MX51_PAD_DI1_PIN13__GPIO3_2,
- MX51_PAD_GPIO1_4__GPIO1_4,
-
- /* power off */
- MX51_PAD_CSI2_VSYNC__GPIO4_13,
-};
-
-/* PCBID2 PCBID1 PCBID0 STATE
- 1 1 1 ER1:rev1.1
- 1 1 0 ER2:rev1.2
- 1 0 1 ER3:rev1.3
- 1 0 0 ER4:rev1.4
-*/
-static void __init mx51_efikamx_board_id(void)
-{
- int id;
-
- /* things are taking time to settle */
- msleep(150);
-
- gpio_request(EFIKAMX_PCBID0, "pcbid0");
- gpio_direction_input(EFIKAMX_PCBID0);
- gpio_request(EFIKAMX_PCBID1, "pcbid1");
- gpio_direction_input(EFIKAMX_PCBID1);
- gpio_request(EFIKAMX_PCBID2, "pcbid2");
- gpio_direction_input(EFIKAMX_PCBID2);
-
- id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
- id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
- id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
-
- switch (id) {
- case 7:
- system_rev = 0x11;
- break;
- case 6:
- system_rev = 0x12;
- break;
- case 5:
- system_rev = 0x13;
- break;
- case 4:
- system_rev = 0x14;
- break;
- default:
- system_rev = 0x10;
- break;
- }
-
- if ((system_rev == 0x10)
- || (system_rev == 0x12)
- || (system_rev == 0x14)) {
- printk(KERN_WARNING
- "EfikaMX: Unsupported board revision 1.%u!\n",
- system_rev & 0xf);
- }
-}
-
-static struct gpio_led mx51_efikamx_leds[] __initdata = {
- {
- .name = "efikamx:green",
- .default_trigger = "default-on",
- .gpio = EFIKAMX_GREEN_LED,
- },
- {
- .name = "efikamx:red",
- .default_trigger = "ide-disk",
- .gpio = EFIKAMX_RED_LED,
- },
- {
- .name = "efikamx:blue",
- .default_trigger = "mmc0",
- .gpio = EFIKAMX_BLUE_LED,
- },
-};
-
-static const struct gpio_led_platform_data
- mx51_efikamx_leds_data __initconst = {
- .leds = mx51_efikamx_leds,
- .num_leds = ARRAY_SIZE(mx51_efikamx_leds),
-};
-
-static struct esdhc_platform_data sd_pdata = {
- .cd_type = ESDHC_CD_CONTROLLER,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct gpio_keys_button mx51_efikamx_powerkey[] = {
- {
- .code = KEY_POWER,
- .gpio = EFIKAMX_POWER_KEY,
- .type = EV_PWR,
- .desc = "Power Button (CM)",
- .wakeup = 1,
- .debounce_interval = 10, /* ms */
- },
-};
-
-static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
- .buttons = mx51_efikamx_powerkey,
- .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
-};
-
-void mx51_efikamx_reset(void)
-{
- if (system_rev == 0x11)
- gpio_direction_output(EFIKAMX_RESET1_1, 0);
- else
- gpio_direction_output(EFIKAMX_RESET, 0);
-}
-
-static struct regulator *pwgt1, *pwgt2, *coincell;
-
-static void mx51_efikamx_power_off(void)
-{
- if (!IS_ERR(coincell))
- regulator_disable(coincell);
-
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_disable(pwgt2);
- regulator_disable(pwgt1);
- }
- gpio_direction_output(EFIKAMX_POWEROFF, 1);
-}
-
-static int __init mx51_efikamx_power_init(void)
-{
- if (machine_is_mx51_efikamx()) {
- pwgt1 = regulator_get(NULL, "pwgt1");
- pwgt2 = regulator_get(NULL, "pwgt2");
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_enable(pwgt1);
- regulator_enable(pwgt2);
- }
- gpio_request(EFIKAMX_POWEROFF, "poweroff");
- pm_power_off = mx51_efikamx_power_off;
-
- /* enable coincell charger. maybe need a small power driver ? */
- coincell = regulator_get(NULL, "coincell");
- if (!IS_ERR(coincell)) {
- regulator_set_voltage(coincell, 3000000, 3000000);
- regulator_enable(coincell);
- }
-
- regulator_has_full_constraints();
- }
-
- return 0;
-}
-late_initcall(mx51_efikamx_power_init);
-
-static void __init mx51_efikamx_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
- ARRAY_SIZE(mx51efikamx_pads));
- efika_board_common_init();
-
- mx51_efikamx_board_id();
-
- /* on < 1.2 boards both SD controllers are used */
- if (system_rev < 0x12) {
- imx51_add_sdhci_esdhc_imx(0, NULL);
- imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
- mx51_efikamx_leds[2].default_trigger = "mmc1";
- } else
- imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
-
- gpio_led_register_device(-1, &mx51_efikamx_leds_data);
- imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
-
- if (system_rev == 0x11) {
- gpio_request(EFIKAMX_RESET1_1, "reset");
- gpio_direction_output(EFIKAMX_RESET1_1, 1);
- } else {
- gpio_request(EFIKAMX_RESET, "reset");
- gpio_direction_output(EFIKAMX_RESET, 1);
- }
-
- /*
- * enable wifi by default only on mx
- * sb and mx have same wlan pin but the value to enable it are
- * different :/
- */
- gpio_request(EFIKA_WLAN_EN, "wlan_en");
- gpio_direction_output(EFIKA_WLAN_EN, 0);
- msleep(10);
-
- gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
- gpio_direction_output(EFIKA_WLAN_RESET, 0);
- msleep(10);
- gpio_set_value(EFIKA_WLAN_RESET, 1);
-}
-
-static void __init mx51_efikamx_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikamx_timer = {
- .init = mx51_efikamx_timer_init,
-};
-
-MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
- /* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .timer = &mx51_efikamx_timer,
- .init_machine = mx51_efikamx_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
deleted file mode 100644
index 38c4a3e28d3..00000000000
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * Copyright (C) Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKASB_USBH2_STP IMX_GPIO_NR(2, 20)
-#define EFIKASB_GREEN_LED IMX_GPIO_NR(1, 3)
-#define EFIKASB_WHITE_LED IMX_GPIO_NR(2, 25)
-#define EFIKASB_PCBID0 IMX_GPIO_NR(2, 28)
-#define EFIKASB_PCBID1 IMX_GPIO_NR(2, 29)
-#define EFIKASB_PWRKEY IMX_GPIO_NR(2, 31)
-#define EFIKASB_LID IMX_GPIO_NR(3, 14)
-#define EFIKASB_POWEROFF IMX_GPIO_NR(4, 13)
-#define EFIKASB_RFKILL IMX_GPIO_NR(3, 1)
-
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-#define MX51_PAD_SD1_CD IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-
-static iomux_v3_cfg_t mx51efikasb_pads[] = {
- /* USB HOST2 */
- MX51_PAD_EIM_D16__USBH2_DATA0,
- MX51_PAD_EIM_D17__USBH2_DATA1,
- MX51_PAD_EIM_D18__USBH2_DATA2,
- MX51_PAD_EIM_D19__USBH2_DATA3,
- MX51_PAD_EIM_D20__USBH2_DATA4,
- MX51_PAD_EIM_D21__USBH2_DATA5,
- MX51_PAD_EIM_D22__USBH2_DATA6,
- MX51_PAD_EIM_D23__USBH2_DATA7,
- MX51_PAD_EIM_A24__USBH2_CLK,
- MX51_PAD_EIM_A25__USBH2_DIR,
- MX51_PAD_EIM_A26__USBH2_STP,
- MX51_PAD_EIM_A27__USBH2_NXT,
-
- /* leds */
- MX51_PAD_EIM_CS0__GPIO2_25,
- MX51_PAD_GPIO1_3__GPIO1_3,
-
- /* pcb id */
- MX51_PAD_EIM_CS3__GPIO2_28,
- MX51_PAD_EIM_CS4__GPIO2_29,
-
- /* lid */
- MX51_PAD_CSI1_VSYNC__GPIO3_14,
-
- /* power key*/
- MX51_PAD_PWRKEY,
-
- /* wifi/bt button */
- MX51_PAD_DI1_PIN12__GPIO3_1,
-
- /* power off */
- MX51_PAD_CSI2_VSYNC__GPIO4_13,
-
- /* wdog reset */
- MX51_PAD_GPIO1_4__WDOG1_WDOG_B,
-
- /* BT */
- MX51_PAD_EIM_A17__GPIO2_11,
-
- MX51_PAD_SD1_CD,
-};
-
-static int initialize_usbh2_port(struct platform_device *pdev)
-{
- iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP;
- iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20;
-
- mxc_iomux_v3_setup_pad(usbh2gpio);
- gpio_request(EFIKASB_USBH2_STP, "usbh2_stp");
- gpio_direction_output(EFIKASB_USBH2_STP, 0);
- msleep(1);
- gpio_set_value(EFIKASB_USBH2_STP, 1);
- msleep(1);
-
- gpio_free(EFIKASB_USBH2_STP);
- mxc_iomux_v3_setup_pad(usbh2stp);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh2_config __initdata = {
- .init = initialize_usbh2_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void __init mx51_efikasb_usb(void)
-{
- usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
- if (usbh2_config.otg)
- imx51_add_mxc_ehci_hs(2, &usbh2_config);
-}
-
-static const struct gpio_led mx51_efikasb_leds[] __initconst = {
- {
- .name = "efikasb:green",
- .default_trigger = "default-on",
- .gpio = EFIKASB_GREEN_LED,
- .active_low = 1,
- },
- {
- .name = "efikasb:white",
- .default_trigger = "caps",
- .gpio = EFIKASB_WHITE_LED,
- },
-};
-
-static const struct gpio_led_platform_data
- mx51_efikasb_leds_data __initconst = {
- .leds = mx51_efikasb_leds,
- .num_leds = ARRAY_SIZE(mx51_efikasb_leds),
-};
-
-static struct gpio_keys_button mx51_efikasb_keys[] = {
- {
- .code = KEY_POWER,
- .gpio = EFIKASB_PWRKEY,
- .type = EV_KEY,
- .desc = "Power Button",
- .wakeup = 1,
- .active_low = 1,
- },
- {
- .code = SW_LID,
- .gpio = EFIKASB_LID,
- .type = EV_SW,
- .desc = "Lid Switch",
- .active_low = 1,
- },
- {
- .code = KEY_RFKILL,
- .gpio = EFIKASB_RFKILL,
- .type = EV_KEY,
- .desc = "rfkill",
- .active_low = 1,
- },
-};
-
-static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = {
- .buttons = mx51_efikasb_keys,
- .nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
-};
-
-static struct esdhc_platform_data sd0_pdata = {
-#define EFIKASB_SD1_CD IMX_GPIO_NR(2, 27)
- .cd_gpio = EFIKASB_SD1_CD,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
- .cd_type = ESDHC_CD_CONTROLLER,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct regulator *pwgt1, *pwgt2;
-
-static void mx51_efikasb_power_off(void)
-{
- gpio_set_value(EFIKA_USB_PHY_RESET, 0);
-
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_disable(pwgt2);
- regulator_disable(pwgt1);
- }
- gpio_direction_output(EFIKASB_POWEROFF, 1);
-}
-
-static int __init mx51_efikasb_power_init(void)
-{
- if (machine_is_mx51_efikasb()) {
- pwgt1 = regulator_get(NULL, "pwgt1");
- pwgt2 = regulator_get(NULL, "pwgt2");
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_enable(pwgt1);
- regulator_enable(pwgt2);
- }
- gpio_request(EFIKASB_POWEROFF, "poweroff");
- pm_power_off = mx51_efikasb_power_off;
-
- regulator_has_full_constraints();
- }
-
- return 0;
-}
-late_initcall(mx51_efikasb_power_init);
-
-/* 01 R1.3 board
- 10 R2.0 board */
-static void __init mx51_efikasb_board_id(void)
-{
- int id;
-
- gpio_request(EFIKASB_PCBID0, "pcb id0");
- gpio_direction_input(EFIKASB_PCBID0);
- gpio_request(EFIKASB_PCBID1, "pcb id1");
- gpio_direction_input(EFIKASB_PCBID1);
-
- id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
- id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
-
- switch (id) {
- default:
- break;
- case 1:
- system_rev = 0x13;
- break;
- case 2:
- system_rev = 0x20;
- break;
- }
-}
-
-static void __init efikasb_board_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
- ARRAY_SIZE(mx51efikasb_pads));
- efika_board_common_init();
-
- mx51_efikasb_board_id();
- mx51_efikasb_usb();
- imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
- imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
-
- gpio_led_register_device(-1, &mx51_efikasb_leds_data);
- imx_add_gpio_keys(&mx51_efikasb_keys_data);
-}
-
-static void __init mx51_efikasb_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikasb_timer = {
- .init = mx51_efikasb_timer_init,
-};
-
-MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .init_machine = efikasb_board_init,
- .timer = &mx51_efikasb_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
deleted file mode 100644
index 0d7f0fffb23..00000000000
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "crm_regs.h"
-#include "devices-imx53.h"
-
-#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31)
-#define ARD_SD1_CD IMX_GPIO_NR(1, 1)
-#define ARD_SD1_WP IMX_GPIO_NR(1, 9)
-#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3)
-#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0)
-#define ARD_HOME IMX_GPIO_NR(5, 10)
-#define ARD_BACK IMX_GPIO_NR(5, 11)
-#define ARD_PROG IMX_GPIO_NR(5, 12)
-#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13)
-
-static iomux_v3_cfg_t mx53_ard_pads[] = {
- /* UART1 */
- MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
- MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
- /* WEIM for CS1 */
- MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
- MX53_PAD_EIM_D16__EMI_WEIM_D_16,
- MX53_PAD_EIM_D17__EMI_WEIM_D_17,
- MX53_PAD_EIM_D18__EMI_WEIM_D_18,
- MX53_PAD_EIM_D19__EMI_WEIM_D_19,
- MX53_PAD_EIM_D20__EMI_WEIM_D_20,
- MX53_PAD_EIM_D21__EMI_WEIM_D_21,
- MX53_PAD_EIM_D22__EMI_WEIM_D_22,
- MX53_PAD_EIM_D23__EMI_WEIM_D_23,
- MX53_PAD_EIM_D24__EMI_WEIM_D_24,
- MX53_PAD_EIM_D25__EMI_WEIM_D_25,
- MX53_PAD_EIM_D26__EMI_WEIM_D_26,
- MX53_PAD_EIM_D27__EMI_WEIM_D_27,
- MX53_PAD_EIM_D28__EMI_WEIM_D_28,
- MX53_PAD_EIM_D29__EMI_WEIM_D_29,
- MX53_PAD_EIM_D30__EMI_WEIM_D_30,
- MX53_PAD_EIM_D31__EMI_WEIM_D_31,
- MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
- MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
- MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
- MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
- MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
- MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
- MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
- MX53_PAD_EIM_OE__EMI_WEIM_OE,
- MX53_PAD_EIM_RW__EMI_WEIM_RW,
- MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
- /* SDHC1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
- MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
- MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
- MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
- MX53_PAD_GPIO_1__GPIO1_1,
- MX53_PAD_GPIO_9__GPIO1_9,
- /* I2C2 */
- MX53_PAD_EIM_EB2__I2C2_SCL,
- MX53_PAD_KEY_ROW3__I2C2_SDA,
- /* I2C3 */
- MX53_PAD_GPIO_3__I2C3_SCL,
- MX53_PAD_GPIO_16__I2C3_SDA,
- /* GPIO */
- MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */
- MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */
- MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */
- MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */
- MX53_PAD_GPIO_10__GPIO4_0, /* vol down */
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
-{ \
- .gpio = gpio_num, \
- .type = EV_KEY, \
- .code = ev_code, \
- .active_low = act_low, \
- .desc = "btn " descr, \
- .wakeup = wake, \
-}
-
-static struct gpio_keys_button ard_buttons[] = {
- GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
- GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
- GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
- GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
- GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data ard_button_data __initconst = {
- .buttons = ard_buttons,
- .nbuttons = ARRAY_SIZE(ard_buttons),
-};
-
-static struct resource ard_smsc911x_resources[] = {
- {
- .start = MX53_CS1_64MB_BASE_ADDR,
- .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
- .end = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct smsc911x_platform_config ard_smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static struct platform_device ard_smsc_lan9220_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(ard_smsc911x_resources),
- .resource = ard_smsc911x_resources,
- .dev = {
- .platform_data = &ard_smsc911x_config,
- },
-};
-
-static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
- .cd_gpio = ARD_SD1_CD,
- .wp_gpio = ARD_SD1_WP,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c2_data = {
- .bitrate = 50000,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c3_data = {
- .bitrate = 400000,
-};
-
-static void __init mx53_ard_io_init(void)
-{
- gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
- gpio_direction_input(ARD_ETHERNET_INT_B);
-
- gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
- gpio_direction_output(ARD_I2CPORTEXP_B, 1);
-}
-
-/* Config CS1 settings for ethernet controller */
-static int weim_cs_config(void)
-{
- u32 reg;
- void __iomem *weim_base, *iomuxc_base;
-
- weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
- if (!weim_base)
- return -ENOMEM;
-
- iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
- if (!iomuxc_base)
- return -ENOMEM;
-
- /* CS1 timings for LAN9220 */
- writel(0x20001, (weim_base + 0x18));
- writel(0x0, (weim_base + 0x1C));
- writel(0x16000202, (weim_base + 0x20));
- writel(0x00000002, (weim_base + 0x24));
- writel(0x16002082, (weim_base + 0x28));
- writel(0x00000000, (weim_base + 0x2C));
- writel(0x00000000, (weim_base + 0x90));
-
- /* specify 64 MB on CS1 and CS0 on GPR1 */
- reg = readl(iomuxc_base + 0x4);
- reg &= ~0x3F;
- reg |= 0x1B;
- writel(reg, (iomuxc_base + 0x4));
-
- iounmap(iomuxc_base);
- iounmap(weim_base);
-
- return 0;
-}
-
-void __init imx53_ard_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
- ARRAY_SIZE(mx53_ard_pads));
- weim_cs_config();
-}
-
-static struct platform_device *devices[] __initdata = {
- &ard_smsc_lan9220_device,
-};
-
-static void __init mx53_ard_board_init(void)
-{
- imx53_soc_init();
- imx53_add_imx_uart(0, NULL);
-
- imx53_ard_common_init();
- mx53_ard_io_init();
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
- imx53_add_imx2_wdt(0, NULL);
- imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
- imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
- imx_add_gpio_keys(&ard_button_data);
- imx53_add_ahci_imx();
-}
-
-static void __init mx53_ard_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_ard_timer = {
- .init = mx53_ard_timer_init,
-};
-
-MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_ard_timer,
- .init_machine = mx53_ard_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
deleted file mode 100644
index 6bea31ab8f8..00000000000
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/iomux-mx53.h>
-
-#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30)
-#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
-#define MX53EVK_LED IMX_GPIO_NR(7, 7)
-
-#include "crm_regs.h"
-#include "devices-imx53.h"
-
-static iomux_v3_cfg_t mx53_evk_pads[] = {
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
- MX53_PAD_PATA_DIOR__UART2_RTS,
- MX53_PAD_PATA_INTRQ__UART2_CTS,
-
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-
- MX53_PAD_EIM_D16__ECSPI1_SCLK,
- MX53_PAD_EIM_D17__ECSPI1_MISO,
- MX53_PAD_EIM_D18__ECSPI1_MOSI,
-
- /* ecspi chip select lines */
- MX53_PAD_EIM_EB2__GPIO2_30,
- MX53_PAD_EIM_D19__GPIO3_19,
- /* LED */
- MX53_PAD_PATA_DA_1__GPIO7_7,
-};
-
-static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct gpio_led mx53evk_leds[] __initconst = {
- {
- .name = "green",
- .default_trigger = "heartbeat",
- .gpio = MX53EVK_LED,
- },
-};
-
-static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
- .leds = mx53evk_leds,
- .num_leds = ARRAY_SIZE(mx53evk_leds),
-};
-
-static inline void mx53_evk_init_uart(void)
-{
- imx53_add_imx_uart(0, NULL);
- imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
- imx53_add_imx_uart(2, NULL);
-}
-
-static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static inline void mx53_evk_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
- "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- msleep(1);
- gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
-}
-
-static struct fec_platform_data mx53_evk_fec_pdata = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
- {
- .modalias = "mtd_dataflash",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- .platform_data = NULL,
- },
-};
-
-static int mx53_evk_spi_cs[] = {
- EVK_ECSPI1_CS0,
- EVK_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx53_evk_spi_data __initconst = {
- .chipselect = mx53_evk_spi_cs,
- .num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
-};
-
-void __init imx53_evk_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
- ARRAY_SIZE(mx53_evk_pads));
-}
-
-static void __init mx53_evk_board_init(void)
-{
- imx53_soc_init();
- imx53_evk_common_init();
-
- mx53_evk_init_uart();
- mx53_evk_fec_reset();
- imx53_add_fec(&mx53_evk_fec_pdata);
-
- imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
- imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
-
- imx53_add_sdhci_esdhc_imx(0, NULL);
- imx53_add_sdhci_esdhc_imx(1, NULL);
-
- spi_register_board_info(mx53_evk_spi_board_info,
- ARRAY_SIZE(mx53_evk_spi_board_info));
- imx53_add_ecspi(0, &mx53_evk_spi_data);
- imx53_add_imx2_wdt(0, NULL);
- gpio_led_register_device(-1, &mx53evk_leds_data);
-}
-
-static void __init mx53_evk_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_evk_timer = {
- .init = mx53_evk_timer_init,
-};
-
-MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_evk_timer,
- .init_machine = mx53_evk_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
deleted file mode 100644
index 7678f7734db..00000000000
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "crm_regs.h"
-#include "devices-imx53.h"
-
-#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8)
-#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14)
-#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15)
-#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-#define LOCO_LED IMX_GPIO_NR(7, 7)
-#define LOCO_SD3_CD IMX_GPIO_NR(3, 11)
-#define LOCO_SD3_WP IMX_GPIO_NR(3, 12)
-#define LOCO_SD1_CD IMX_GPIO_NR(3, 13)
-#define LOCO_ACCEL_EN IMX_GPIO_NR(6, 14)
-
-static iomux_v3_cfg_t mx53_loco_pads[] = {
- /* FEC */
- MX53_PAD_FEC_MDC__FEC_MDC,
- MX53_PAD_FEC_MDIO__FEC_MDIO,
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
- MX53_PAD_FEC_RX_ER__FEC_RX_ER,
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
- MX53_PAD_FEC_RXD1__FEC_RDATA_1,
- MX53_PAD_FEC_RXD0__FEC_RDATA_0,
- MX53_PAD_FEC_TX_EN__FEC_TX_EN,
- MX53_PAD_FEC_TXD1__FEC_TDATA_1,
- MX53_PAD_FEC_TXD0__FEC_TDATA_0,
- /* FEC_nRST */
- MX53_PAD_PATA_DA_0__GPIO7_6,
- /* FEC_nINT */
- MX53_PAD_PATA_DATA4__GPIO2_4,
- /* AUDMUX5 */
- MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
- MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
- MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
- MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
- /* I2C1 */
- MX53_PAD_CSI0_DAT8__I2C1_SDA,
- MX53_PAD_CSI0_DAT9__I2C1_SCL,
- MX53_PAD_NANDF_CS1__GPIO6_14, /* Accelerometer Enable */
- /* I2C2 */
- MX53_PAD_KEY_COL3__I2C2_SCL,
- MX53_PAD_KEY_ROW3__I2C2_SDA,
- /* SD1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* SD1_CD */
- MX53_PAD_EIM_DA13__GPIO3_13,
- /* SD3 */
- MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
- MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
- MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
- MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
- MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
- MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
- MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
- MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
- MX53_PAD_PATA_IORDY__ESDHC3_CLK,
- MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
- /* SD3_CD */
- MX53_PAD_EIM_DA11__GPIO3_11,
- /* SD3_WP */
- MX53_PAD_EIM_DA12__GPIO3_12,
- /* VGA */
- MX53_PAD_EIM_OE__IPU_DI1_PIN7,
- MX53_PAD_EIM_RW__IPU_DI1_PIN8,
- /* DISPLB */
- MX53_PAD_EIM_D20__IPU_SER_DISP0_CS,
- MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK,
- MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN,
- MX53_PAD_EIM_D23__IPU_DI0_D0_CS,
- /* DISP0_POWER_EN */
- MX53_PAD_EIM_D24__GPIO3_24,
- /* DISP0 DET INT */
- MX53_PAD_EIM_D31__GPIO3_31,
- /* LVDS */
- MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
- MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
- MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
- MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
- MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
- MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
- MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
- MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
- MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
- MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
- /* I2C1 */
- MX53_PAD_CSI0_DAT8__I2C1_SDA,
- MX53_PAD_CSI0_DAT9__I2C1_SCL,
- /* UART1 */
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
- /* CSI0 */
- MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
- MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
- MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
- MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
- MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
- MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
- MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
- MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
- MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
- MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
- /* DISPLAY */
- MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
- MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
- MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
- MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
- MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
- MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
- MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
- MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
- MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
- MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
- MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
- MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
- MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
- MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
- MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
- MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
- MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
- MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
- MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
- MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
- MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
- MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
- MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
- MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
- MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
- MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
- MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
- MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
- /* Audio CLK*/
- MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK,
- /* PWM */
- MX53_PAD_GPIO_1__PWM2_PWMO,
- /* SPDIF */
- MX53_PAD_GPIO_7__SPDIF_PLOCK,
- MX53_PAD_GPIO_17__SPDIF_OUT1,
- /* GPIO */
- MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */
- MX53_PAD_PATA_DA_2__GPIO7_8,
- MX53_PAD_PATA_DATA5__GPIO2_5,
- MX53_PAD_PATA_DATA6__GPIO2_6,
- MX53_PAD_PATA_DATA14__GPIO2_14,
- MX53_PAD_PATA_DATA15__GPIO2_15,
- MX53_PAD_PATA_INTRQ__GPIO7_2,
- MX53_PAD_EIM_WAIT__GPIO5_0,
- MX53_PAD_NANDF_WP_B__GPIO6_9,
- MX53_PAD_NANDF_RB0__GPIO6_10,
- MX53_PAD_NANDF_CS1__GPIO6_14,
- MX53_PAD_NANDF_CS2__GPIO6_15,
- MX53_PAD_NANDF_CS3__GPIO6_16,
- MX53_PAD_GPIO_5__GPIO1_5,
- MX53_PAD_GPIO_16__GPIO7_11,
- MX53_PAD_GPIO_8__GPIO1_8,
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
-{ \
- .gpio = gpio_num, \
- .type = EV_KEY, \
- .code = ev_code, \
- .active_low = act_low, \
- .desc = "btn " descr, \
- .wakeup = wake, \
-}
-
-static struct gpio_keys_button loco_buttons[] = {
- GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
- GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
- GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data loco_button_data __initconst = {
- .buttons = loco_buttons,
- .nbuttons = ARRAY_SIZE(loco_buttons),
-};
-
-static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
- .cd_gpio = LOCO_SD1_CD,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_NONE,
-};
-
-static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
- .cd_gpio = LOCO_SD3_CD,
- .wp_gpio = LOCO_SD3_WP,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_GPIO,
-};
-
-static inline void mx53_loco_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- gpio_direction_output(LOCO_FEC_PHY_RST, 0);
- msleep(1);
- gpio_set_value(LOCO_FEC_PHY_RST, 1);
-}
-
-static struct fec_platform_data mx53_loco_fec_data = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static const struct gpio_led mx53loco_leds[] __initconst = {
- {
- .name = "green",
- .default_trigger = "heartbeat",
- .gpio = LOCO_LED,
- },
-};
-
-static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
- .leds = mx53loco_leds,
- .num_leds = ARRAY_SIZE(mx53loco_leds),
-};
-
-void __init imx53_qsb_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
- ARRAY_SIZE(mx53_loco_pads));
-}
-
-static struct i2c_board_info mx53loco_i2c_devices[] = {
- {
- I2C_BOARD_INFO("mma8450", 0x1C),
- },
-};
-
-static void __init mx53_loco_board_init(void)
-{
- int ret;
- imx53_soc_init();
- imx53_qsb_common_init();
-
- imx53_add_imx_uart(0, NULL);
- mx53_loco_fec_reset();
- imx53_add_fec(&mx53_loco_fec_data);
- imx53_add_imx2_wdt(0, NULL);
-
- ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
- if (ret)
- pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
-
- i2c_register_board_info(0, mx53loco_i2c_devices,
- ARRAY_SIZE(mx53loco_i2c_devices));
- imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
- imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
- imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
- imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
- imx_add_gpio_keys(&loco_button_data);
- gpio_led_register_device(-1, &mx53loco_leds_data);
- imx53_add_ahci_imx();
-}
-
-static void __init mx53_loco_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 0, 0);
-}
-
-static struct sys_timer mx53_loco_timer = {
- .init = mx53_loco_timer_init,
-};
-
-MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_loco_timer,
- .init_machine = mx53_loco_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
deleted file mode 100644
index 59c0845eb4a..00000000000
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "crm_regs.h"
-#include "devices-imx53.h"
-
-#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-#define MX53_SMD_SATA_PWR_EN IMX_GPIO_NR(3, 3)
-
-static iomux_v3_cfg_t mx53_smd_pads[] = {
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
- MX53_PAD_PATA_DA_1__UART3_CTS,
- MX53_PAD_PATA_DA_2__UART3_RTS,
- /* I2C1 */
- MX53_PAD_CSI0_DAT8__I2C1_SDA,
- MX53_PAD_CSI0_DAT9__I2C1_SCL,
- /* SD1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* SD2 */
- MX53_PAD_SD2_CMD__ESDHC2_CMD,
- MX53_PAD_SD2_CLK__ESDHC2_CLK,
- MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
- MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
- MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
- MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
- /* SD3 */
- MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
- MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
- MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
- MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
- MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
- MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
- MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
- MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
- MX53_PAD_PATA_IORDY__ESDHC3_CLK,
- MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-};
-
-static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static inline void mx53_smd_init_uart(void)
-{
- imx53_add_imx_uart(0, NULL);
- imx53_add_imx_uart(1, NULL);
- imx53_add_imx_uart(2, &mx53_smd_uart_data);
-}
-
-static inline void mx53_smd_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- gpio_direction_output(SMD_FEC_PHY_RST, 0);
- msleep(1);
- gpio_set_value(SMD_FEC_PHY_RST, 1);
-}
-
-static struct fec_platform_data mx53_smd_fec_data = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static inline void mx53_smd_ahci_pwr_on(void)
-{
- int ret;
-
- /* Enable SATA PWR */
- ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
- GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
- if (ret) {
- pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
- return;
- }
-}
-
-void __init imx53_smd_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
- ARRAY_SIZE(mx53_smd_pads));
-}
-
-static void __init mx53_smd_board_init(void)
-{
- imx53_soc_init();
- imx53_smd_common_init();
-
- mx53_smd_init_uart();
- mx53_smd_fec_reset();
- imx53_add_fec(&mx53_smd_fec_data);
- imx53_add_imx2_wdt(0, NULL);
- imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
- imx53_add_sdhci_esdhc_imx(0, NULL);
- imx53_add_sdhci_esdhc_imx(1, NULL);
- imx53_add_sdhci_esdhc_imx(2, NULL);
- mx53_smd_ahci_pwr_on();
- imx53_add_ahci_imx();
-}
-
-static void __init mx53_smd_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_smd_timer = {
- .init = mx53_smd_timer_init,
-};
-
-MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_smd_timer,
- .init_machine = mx53_smd_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
deleted file mode 100644
index 2aacf41c48e..00000000000
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ /dev/null
@@ -1,1673 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-
-#include <asm/div64.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-
-#include "crm_regs.h"
-
-/* External clock values passed-in by the board code */
-static unsigned long external_high_reference, external_low_reference;
-static unsigned long oscillator_reference, ckih2_reference;
-
-static struct clk osc_clk;
-static struct clk pll1_main_clk;
-static struct clk pll1_sw_clk;
-static struct clk pll2_sw_clk;
-static struct clk pll3_sw_clk;
-static struct clk mx53_pll4_sw_clk;
-static struct clk lp_apm_clk;
-static struct clk periph_apm_clk;
-static struct clk ahb_clk;
-static struct clk ipg_clk;
-static struct clk usboh3_clk;
-static struct clk emi_fast_clk;
-static struct clk ipu_clk;
-static struct clk mipi_hsc1_clk;
-static struct clk esdhc1_clk;
-static struct clk esdhc2_clk;
-static struct clk esdhc3_mx53_clk;
-
-#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
-
-/* calculate best pre and post dividers to get the required divider */
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post,
- u32 max_pre, u32 max_post)
-{
- if (div >= max_pre * max_post) {
- *pre = max_pre;
- *post = max_post;
- } else if (div >= max_pre) {
- u32 min_pre, temp_pre, old_err, err;
- min_pre = DIV_ROUND_UP(div, max_post);
- old_err = max_pre;
- for (temp_pre = max_pre; temp_pre >= min_pre; temp_pre--) {
- err = div % temp_pre;
- if (err == 0) {
- *pre = temp_pre;
- break;
- }
- err = temp_pre - err;
- if (err < old_err) {
- old_err = err;
- *pre = temp_pre;
- }
- }
- *post = DIV_ROUND_UP(div, *pre);
- } else {
- *pre = div;
- *post = 1;
- }
-}
-
-static void _clk_ccgr_setclk(struct clk *clk, unsigned mode)
-{
- u32 reg = __raw_readl(clk->enable_reg);
-
- reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
- reg |= mode << clk->enable_shift;
-
- __raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_ccgr_enable(struct clk *clk)
-{
- _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON);
- return 0;
-}
-
-static void _clk_ccgr_disable(struct clk *clk)
-{
- _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF);
-}
-
-static int _clk_ccgr_enable_inrun(struct clk *clk)
-{
- _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
- return 0;
-}
-
-static void _clk_ccgr_disable_inwait(struct clk *clk)
-{
- _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
-}
-
-/*
- * For the 4-to-1 muxed input clock
- */
-static inline u32 _get_mux(struct clk *parent, struct clk *m0,
- struct clk *m1, struct clk *m2, struct clk *m3)
-{
- if (parent == m0)
- return 0;
- else if (parent == m1)
- return 1;
- else if (parent == m2)
- return 2;
- else if (parent == m3)
- return 3;
- else
- BUG();
-
- return -EINVAL;
-}
-
-static inline void __iomem *_mx51_get_pll_base(struct clk *pll)
-{
- if (pll == &pll1_main_clk)
- return MX51_DPLL1_BASE;
- else if (pll == &pll2_sw_clk)
- return MX51_DPLL2_BASE;
- else if (pll == &pll3_sw_clk)
- return MX51_DPLL3_BASE;
- else
- BUG();
-
- return NULL;
-}
-
-static inline void __iomem *_mx53_get_pll_base(struct clk *pll)
-{
- if (pll == &pll1_main_clk)
- return MX53_DPLL1_BASE;
- else if (pll == &pll2_sw_clk)
- return MX53_DPLL2_BASE;
- else if (pll == &pll3_sw_clk)
- return MX53_DPLL3_BASE;
- else if (pll == &mx53_pll4_sw_clk)
- return MX53_DPLL4_BASE;
- else
- BUG();
-
- return NULL;
-}
-
-static inline void __iomem *_get_pll_base(struct clk *pll)
-{
- if (cpu_is_mx51())
- return _mx51_get_pll_base(pll);
- else
- return _mx53_get_pll_base(pll);
-}
-
-static unsigned long clk_pll_get_rate(struct clk *clk)
-{
- long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
- unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
- void __iomem *pllbase;
- s64 temp;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- pllbase = _get_pll_base(clk);
-
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
- dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
-
- if (pll_hfsm == 0) {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
- } else {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
- }
- pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
- mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
- mfi = (mfi <= 5) ? 5 : mfi;
- mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
- mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
- /* Sign extend to 32-bits */
- if (mfn >= 0x04000000) {
- mfn |= 0xFC000000;
- mfn_abs = -mfn;
- }
-
- ref_clk = 2 * parent_rate;
- if (dbl != 0)
- ref_clk *= 2;
-
- ref_clk /= (pdf + 1);
- temp = (u64) ref_clk * mfn_abs;
- do_div(temp, mfd + 1);
- if (mfn < 0)
- temp = -temp;
- temp = (ref_clk * mfi) + temp;
-
- return temp;
-}
-
-static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- void __iomem *pllbase;
-
- long mfi, pdf, mfn, mfd = 999999;
- s64 temp64;
- unsigned long quad_parent_rate;
- unsigned long pll_hfsm, dp_ctl;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- pllbase = _get_pll_base(clk);
-
- quad_parent_rate = 4 * parent_rate;
- pdf = mfi = -1;
- while (++pdf < 16 && mfi < 5)
- mfi = rate * (pdf+1) / quad_parent_rate;
- if (mfi > 15)
- return -EINVAL;
- pdf--;
-
- temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
- do_div(temp64, quad_parent_rate/1000000);
- mfn = (long)temp64;
-
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- /* use dpdck0_2 */
- __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
- if (pll_hfsm == 0) {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
- } else {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
- }
-
- return 0;
-}
-
-static int _clk_pll_enable(struct clk *clk)
-{
- u32 reg;
- void __iomem *pllbase;
- int i = 0;
-
- pllbase = _get_pll_base(clk);
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- if (reg & MXC_PLL_DP_CTL_UPEN)
- return 0;
-
- reg |= MXC_PLL_DP_CTL_UPEN;
- __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-
- /* Wait for lock */
- do {
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- if (reg & MXC_PLL_DP_CTL_LRF)
- break;
-
- udelay(1);
- } while (++i < MAX_DPLL_WAIT_TRIES);
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- pr_err("MX5: pll locking failed\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void _clk_pll_disable(struct clk *clk)
-{
- u32 reg;
- void __iomem *pllbase;
-
- pllbase = _get_pll_base(clk);
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
- __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-}
-
-static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg, step;
-
- reg = __raw_readl(MXC_CCM_CCSR);
-
- /* When switching from pll_main_clk to a bypass clock, first select a
- * multiplexed clock in 'step_sel', then shift the glitchless mux
- * 'pll1_sw_clk_sel'.
- *
- * When switching back, do it in reverse order
- */
- if (parent == &pll1_main_clk) {
- /* Switch to pll1_main_clk */
- reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
- __raw_writel(reg, MXC_CCM_CCSR);
- /* step_clk mux switched to lp_apm, to save power. */
- reg = __raw_readl(MXC_CCM_CCSR);
- reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
- reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
- MXC_CCM_CCSR_STEP_SEL_OFFSET);
- } else {
- if (parent == &lp_apm_clk) {
- step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
- } else if (parent == &pll2_sw_clk) {
- step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
- } else if (parent == &pll3_sw_clk) {
- step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
- } else
- return -EINVAL;
-
- reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
- reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
-
- __raw_writel(reg, MXC_CCM_CCSR);
- /* Switch to step_clk */
- reg = __raw_readl(MXC_CCM_CCSR);
- reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
- }
- __raw_writel(reg, MXC_CCM_CCSR);
- return 0;
-}
-
-static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
-{
- u32 reg, div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- reg = __raw_readl(MXC_CCM_CCSR);
-
- if (clk->parent == &pll2_sw_clk) {
- div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
- MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
- } else if (clk->parent == &pll3_sw_clk) {
- div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
- MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
- } else
- div = 1;
- return parent_rate / div;
-}
-
-static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCSR);
-
- if (parent == &pll2_sw_clk)
- reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
- else
- reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
-
- __raw_writel(reg, MXC_CCM_CCSR);
- return 0;
-}
-
-static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- if (parent == &osc_clk)
- reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
- else
- return -EINVAL;
-
- __raw_writel(reg, MXC_CCM_CCSR);
-
- return 0;
-}
-
-static unsigned long clk_cpu_get_rate(struct clk *clk)
-{
- u32 cacrr, div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
- cacrr = __raw_readl(MXC_CCM_CACRR);
- div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
-
- return parent_rate / div;
-}
-
-static int clk_cpu_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, cpu_podf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
- cpu_podf = parent_rate / rate - 1;
- /* use post divider to change freq */
- reg = __raw_readl(MXC_CCM_CACRR);
- reg &= ~MXC_CCM_CACRR_ARM_PODF_MASK;
- reg |= cpu_podf << MXC_CCM_CACRR_ARM_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_CACRR);
-
- return 0;
-}
-
-static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg, mux;
- int i = 0;
-
- mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
-
- reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
- reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
- __raw_writel(reg, MXC_CCM_CBCMR);
-
- /* Wait for lock */
- do {
- reg = __raw_readl(MXC_CCM_CDHIPR);
- if (!(reg & MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
- break;
-
- udelay(1);
- } while (++i < MAX_DPLL_WAIT_TRIES);
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- pr_err("MX5: Set parent for periph_apm clock failed\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
-
- if (parent == &pll2_sw_clk)
- reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
- else if (parent == &periph_apm_clk)
- reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
- else
- return -EINVAL;
-
- __raw_writel(reg, MXC_CCM_CBCDR);
-
- return 0;
-}
-
-static struct clk main_bus_clk = {
- .parent = &pll2_sw_clk,
- .set_parent = _clk_main_bus_set_parent,
-};
-
-static unsigned long clk_ahb_get_rate(struct clk *clk)
-{
- u32 reg, div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
- MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
- return parent_rate / div;
-}
-
-
-static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div;
- unsigned long parent_rate;
- int i = 0;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (div > 8 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
- reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_CBCDR);
-
- /* Wait for lock */
- do {
- reg = __raw_readl(MXC_CCM_CDHIPR);
- if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
- break;
-
- udelay(1);
- } while (++i < MAX_DPLL_WAIT_TRIES);
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- pr_err("MX5: clk_ahb_set_rate failed\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static unsigned long _clk_ahb_round_rate(struct clk *clk,
- unsigned long rate)
-{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (div > 8)
- div = 8;
- else if (div == 0)
- div++;
- return parent_rate / div;
-}
-
-
-static int _clk_max_enable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_enable(clk);
-
- /* Handshake with MAX when LPM is entered. */
- reg = __raw_readl(MXC_CCM_CLPCR);
- if (cpu_is_mx51())
- reg &= ~MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
- else if (cpu_is_mx53())
- reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-
- return 0;
-}
-
-static void _clk_max_disable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_disable_inwait(clk);
-
- /* No Handshake with MAX when LPM is entered as its disabled. */
- reg = __raw_readl(MXC_CCM_CLPCR);
- if (cpu_is_mx51())
- reg |= MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
- else if (cpu_is_mx53())
- reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static unsigned long clk_ipg_get_rate(struct clk *clk)
-{
- u32 reg, div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
- MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
-
- return parent_rate / div;
-}
-
-static unsigned long clk_ipg_per_get_rate(struct clk *clk)
-{
- u32 reg, prediv1, prediv2, podf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
- /* the main_bus_clk is the one before the DVFS engine */
- reg = __raw_readl(MXC_CCM_CBCDR);
- prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
- MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
- prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
- MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
- podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
- MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
- return parent_rate / (prediv1 * prediv2 * podf);
- } else if (clk->parent == &ipg_clk)
- return parent_rate;
- else
- BUG();
-}
-
-static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CBCMR);
-
- reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
- reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
-
- if (parent == &ipg_clk)
- reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
- else if (parent == &lp_apm_clk)
- reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
- else if (parent != &main_bus_clk)
- return -EINVAL;
-
- __raw_writel(reg, MXC_CCM_CBCMR);
-
- return 0;
-}
-
-#define clk_nfc_set_parent NULL
-
-static unsigned long clk_nfc_get_rate(struct clk *clk)
-{
- unsigned long rate;
- u32 reg, div;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >>
- MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1;
- rate = clk_get_rate(clk->parent) / div;
- WARN_ON(rate == 0);
- return rate;
-}
-
-static unsigned long clk_nfc_round_rate(struct clk *clk,
- unsigned long rate)
-{
- u32 div;
- unsigned long parent_rate = clk_get_rate(clk->parent);
-
- if (!rate)
- return -EINVAL;
-
- div = parent_rate / rate;
-
- if (parent_rate % rate)
- div++;
-
- if (div > 8)
- return -EINVAL;
-
- return parent_rate / div;
-
-}
-
-static int clk_nfc_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div;
-
- div = clk_get_rate(clk->parent) / rate;
- if (div == 0)
- div++;
- if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8))
- return -EINVAL;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK;
- reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_CBCDR);
-
- while (__raw_readl(MXC_CCM_CDHIPR) &
- MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){
- }
-
- return 0;
-}
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
- return external_high_reference;
-}
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
- return external_low_reference;
-}
-
-static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
-{
- return oscillator_reference;
-}
-
-static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
-{
- return ckih2_reference;
-}
-
-static unsigned long clk_emi_slow_get_rate(struct clk *clk)
-{
- u32 reg, div;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >>
- MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1;
-
- return clk_get_rate(clk->parent) / div;
-}
-
-static unsigned long _clk_ddr_hf_get_rate(struct clk *clk)
-{
- unsigned long rate;
- u32 reg, div;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_DDR_PODF_MASK) >>
- MXC_CCM_CBCDR_DDR_PODF_OFFSET) + 1;
- rate = clk_get_rate(clk->parent) / div;
-
- return rate;
-}
-
-/* External high frequency clock */
-static struct clk ckih_clk = {
- .get_rate = get_high_reference_clock_rate,
-};
-
-static struct clk ckih2_clk = {
- .get_rate = get_ckih2_reference_clock_rate,
-};
-
-static struct clk osc_clk = {
- .get_rate = get_oscillator_reference_clock_rate,
-};
-
-/* External low frequency (32kHz) clock */
-static struct clk ckil_clk = {
- .get_rate = get_low_reference_clock_rate,
-};
-
-static struct clk pll1_main_clk = {
- .parent = &osc_clk,
- .get_rate = clk_pll_get_rate,
- .enable = _clk_pll_enable,
- .disable = _clk_pll_disable,
-};
-
-/* Clock tree block diagram (WIP):
- * CCM: Clock Controller Module
- *
- * PLL output -> |
- * | CCM Switcher -> CCM_CLK_ROOT_GEN ->
- * PLL bypass -> |
- *
- */
-
-/* PLL1 SW supplies to ARM core */
-static struct clk pll1_sw_clk = {
- .parent = &pll1_main_clk,
- .set_parent = _clk_pll1_sw_set_parent,
- .get_rate = clk_pll1_sw_get_rate,
-};
-
-/* PLL2 SW supplies to AXI/AHB/IP buses */
-static struct clk pll2_sw_clk = {
- .parent = &osc_clk,
- .get_rate = clk_pll_get_rate,
- .set_rate = _clk_pll_set_rate,
- .set_parent = _clk_pll2_sw_set_parent,
- .enable = _clk_pll_enable,
- .disable = _clk_pll_disable,
-};
-
-/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
-static struct clk pll3_sw_clk = {
- .parent = &osc_clk,
- .set_rate = _clk_pll_set_rate,
- .get_rate = clk_pll_get_rate,
- .enable = _clk_pll_enable,
- .disable = _clk_pll_disable,
-};
-
-/* PLL4 SW supplies to LVDS Display Bridge(LDB) */
-static struct clk mx53_pll4_sw_clk = {
- .parent = &osc_clk,
- .set_rate = _clk_pll_set_rate,
- .enable = _clk_pll_enable,
- .disable = _clk_pll_disable,
-};
-
-/* Low-power Audio Playback Mode clock */
-static struct clk lp_apm_clk = {
- .parent = &osc_clk,
- .set_parent = _clk_lp_apm_set_parent,
-};
-
-static struct clk periph_apm_clk = {
- .parent = &pll1_sw_clk,
- .set_parent = _clk_periph_apm_set_parent,
-};
-
-static struct clk cpu_clk = {
- .parent = &pll1_sw_clk,
- .get_rate = clk_cpu_get_rate,
- .set_rate = clk_cpu_set_rate,
-};
-
-static struct clk ahb_clk = {
- .parent = &main_bus_clk,
- .get_rate = clk_ahb_get_rate,
- .set_rate = _clk_ahb_set_rate,
- .round_rate = _clk_ahb_round_rate,
-};
-
-static struct clk iim_clk = {
- .parent = &ipg_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG15_OFFSET,
-};
-
-/* Main IP interface clock for access to registers */
-static struct clk ipg_clk = {
- .parent = &ahb_clk,
- .get_rate = clk_ipg_get_rate,
-};
-
-static struct clk ipg_perclk = {
- .parent = &lp_apm_clk,
- .get_rate = clk_ipg_per_get_rate,
- .set_parent = _clk_ipg_per_set_parent,
-};
-
-static struct clk ahb_max_clk = {
- .parent = &ahb_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
-};
-
-static struct clk aips_tz1_clk = {
- .parent = &ahb_clk,
- .secondary = &ahb_max_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk aips_tz2_clk = {
- .parent = &ahb_clk,
- .secondary = &ahb_max_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk gpc_dvfs_clk = {
- .enable_reg = MXC_CCM_CCGR5,
- .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable,
-};
-
-static struct clk gpt_32k_clk = {
- .id = 0,
- .parent = &ckil_clk,
-};
-
-static struct clk dummy_clk = {
- .id = 0,
-};
-
-static struct clk emi_slow_clk = {
- .parent = &pll2_sw_clk,
- .enable_reg = MXC_CCM_CCGR5,
- .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable_inwait,
- .get_rate = clk_emi_slow_get_rate,
-};
-
-static int clk_ipu_enable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_enable(clk);
-
- /* Enable handshake with IPU when certain clock rates are changed */
- reg = __raw_readl(MXC_CCM_CCDR);
- reg &= ~MXC_CCM_CCDR_IPU_HS_MASK;
- __raw_writel(reg, MXC_CCM_CCDR);
-
- /* Enable handshake with IPU when LPM is entered */
- reg = __raw_readl(MXC_CCM_CLPCR);
- reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-
- return 0;
-}
-
-static void clk_ipu_disable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_disable(clk);
-
- /* Disable handshake with IPU whe dividers are changed */
- reg = __raw_readl(MXC_CCM_CCDR);
- reg |= MXC_CCM_CCDR_IPU_HS_MASK;
- __raw_writel(reg, MXC_CCM_CCDR);
-
- /* Disable handshake with IPU when LPM is entered */
- reg = __raw_readl(MXC_CCM_CLPCR);
- reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static struct clk ahbmux1_clk = {
- .parent = &ahb_clk,
- .secondary = &ahb_max_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk ipu_sec_clk = {
- .parent = &emi_fast_clk,
- .secondary = &ahbmux1_clk,
-};
-
-static struct clk ddr_hf_clk = {
- .parent = &pll1_sw_clk,
- .get_rate = _clk_ddr_hf_get_rate,
-};
-
-static struct clk ddr_clk = {
- .parent = &ddr_hf_clk,
-};
-
-/* clock definitions for MIPI HSC unit which has been removed
- * from documentation, but not from hardware
- */
-static int _clk_hsc_enable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_enable(clk);
- /* Handshake with IPU when certain clock rates are changed. */
- reg = __raw_readl(MXC_CCM_CCDR);
- reg &= ~MXC_CCM_CCDR_HSC_HS_MASK;
- __raw_writel(reg, MXC_CCM_CCDR);
-
- reg = __raw_readl(MXC_CCM_CLPCR);
- reg &= ~MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-
- return 0;
-}
-
-static void _clk_hsc_disable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_disable(clk);
- /* No handshake with HSC as its not enabled. */
- reg = __raw_readl(MXC_CCM_CCDR);
- reg |= MXC_CCM_CCDR_HSC_HS_MASK;
- __raw_writel(reg, MXC_CCM_CCDR);
-
- reg = __raw_readl(MXC_CCM_CLPCR);
- reg |= MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static struct clk mipi_hsp_clk = {
- .parent = &ipu_clk,
- .enable_reg = MXC_CCM_CCGR4,
- .enable_shift = MXC_CCM_CCGRx_CG6_OFFSET,
- .enable = _clk_hsc_enable,
- .disable = _clk_hsc_disable,
- .secondary = &mipi_hsc1_clk,
-};
-
-#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = pfx##_get_rate, \
- .set_rate = pfx##_set_rate, \
- .round_rate = pfx##_round_rate, \
- .set_parent = pfx##_set_parent, \
- .enable = _clk_ccgr_enable, \
- .disable = _clk_ccgr_disable, \
- .parent = p, \
- .secondary = s, \
- }
-
-#define DEFINE_CLOCK_MAX(name, i, er, es, pfx, p, s) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = pfx##_get_rate, \
- .set_rate = pfx##_set_rate, \
- .set_parent = pfx##_set_parent, \
- .enable = _clk_max_enable, \
- .disable = _clk_max_disable, \
- .parent = p, \
- .secondary = s, \
- }
-
-#define CLK_GET_RATE(name, nr, bitsname) \
-static unsigned long clk_##name##_get_rate(struct clk *clk) \
-{ \
- u32 reg, pred, podf; \
- \
- reg = __raw_readl(MXC_CCM_CSCDR##nr); \
- pred = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK) \
- >> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET; \
- podf = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK) \
- >> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET; \
- \
- return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), \
- (pred + 1) * (podf + 1)); \
-}
-
-#define CLK_SET_PARENT(name, nr, bitsname) \
-static int clk_##name##_set_parent(struct clk *clk, struct clk *parent) \
-{ \
- u32 reg, mux; \
- \
- mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, \
- &pll3_sw_clk, &lp_apm_clk); \
- reg = __raw_readl(MXC_CCM_CSCMR##nr) & \
- ~MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_MASK; \
- reg |= mux << MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_OFFSET; \
- __raw_writel(reg, MXC_CCM_CSCMR##nr); \
- \
- return 0; \
-}
-
-#define CLK_SET_RATE(name, nr, bitsname) \
-static int clk_##name##_set_rate(struct clk *clk, unsigned long rate) \
-{ \
- u32 reg, div, parent_rate; \
- u32 pre = 0, post = 0; \
- \
- parent_rate = clk_get_rate(clk->parent); \
- div = parent_rate / rate; \
- \
- if ((parent_rate / div) != rate) \
- return -EINVAL; \
- \
- __calc_pre_post_dividers(div, &pre, &post, \
- (MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK >> \
- MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET) + 1, \
- (MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK >> \
- MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET) + 1);\
- \
- /* Set sdhc1 clock divider */ \
- reg = __raw_readl(MXC_CCM_CSCDR##nr) & \
- ~(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK \
- | MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK); \
- reg |= (post - 1) << \
- MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET; \
- reg |= (pre - 1) << \
- MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET; \
- __raw_writel(reg, MXC_CCM_CSCDR##nr); \
- \
- return 0; \
-}
-
-/* UART */
-CLK_GET_RATE(uart, 1, UART)
-CLK_SET_PARENT(uart, 1, UART)
-
-static struct clk uart_root_clk = {
- .parent = &pll2_sw_clk,
- .get_rate = clk_uart_get_rate,
- .set_parent = clk_uart_set_parent,
-};
-
-/* USBOH3 */
-CLK_GET_RATE(usboh3, 1, USBOH3)
-CLK_SET_PARENT(usboh3, 1, USBOH3)
-
-static struct clk usboh3_clk = {
- .parent = &pll2_sw_clk,
- .get_rate = clk_usboh3_get_rate,
- .set_parent = clk_usboh3_set_parent,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable,
- .enable_reg = MXC_CCM_CCGR2,
- .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
-};
-
-static struct clk usb_ahb_clk = {
- .parent = &ipg_clk,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable,
- .enable_reg = MXC_CCM_CCGR2,
- .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
-};
-
-static int clk_usb_phy1_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USB_PHY_CLK_SEL;
-
- if (parent == &pll3_sw_clk)
- reg |= 1 << MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET;
-
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-static struct clk usb_phy1_clk = {
- .parent = &pll3_sw_clk,
- .set_parent = clk_usb_phy1_set_parent,
- .enable = _clk_ccgr_enable,
- .enable_reg = MXC_CCM_CCGR2,
- .enable_shift = MXC_CCM_CCGRx_CG0_OFFSET,
- .disable = _clk_ccgr_disable,
-};
-
-/* eCSPI */
-CLK_GET_RATE(ecspi, 2, CSPI)
-CLK_SET_PARENT(ecspi, 1, CSPI)
-
-static struct clk ecspi_main_clk = {
- .parent = &pll3_sw_clk,
- .get_rate = clk_ecspi_get_rate,
- .set_parent = clk_ecspi_set_parent,
-};
-
-/* eSDHC */
-CLK_GET_RATE(esdhc1, 1, ESDHC1_MSHC1)
-CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1)
-CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1)
-
-/* mx51 specific */
-CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2)
-CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2)
-CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2)
-
-static int clk_esdhc3_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1);
- if (parent == &esdhc1_clk)
- reg &= ~MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
- else if (parent == &esdhc2_clk)
- reg |= MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
- else
- return -EINVAL;
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-static int clk_esdhc4_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1);
- if (parent == &esdhc1_clk)
- reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
- else if (parent == &esdhc2_clk)
- reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
- else
- return -EINVAL;
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-/* mx53 specific */
-static int clk_esdhc2_mx53_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1);
- if (parent == &esdhc1_clk)
- reg &= ~MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
- else if (parent == &esdhc3_mx53_clk)
- reg |= MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
- else
- return -EINVAL;
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-CLK_GET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
-CLK_SET_PARENT(esdhc3_mx53, 1, ESDHC3_MX53)
-CLK_SET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
-
-static int clk_esdhc4_mx53_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1);
- if (parent == &esdhc1_clk)
- reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
- else if (parent == &esdhc3_mx53_clk)
- reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
- else
- return -EINVAL;
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .set_rate = sr, \
- .enable = e, \
- .disable = d, \
- .parent = p, \
- .secondary = s, \
- }
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
- DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s)
-
-/* Shared peripheral bus arbiter */
-DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-
-/* UART */
-DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
- NULL, NULL, &ipg_clk, &aips_tz1_clk);
-DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
- NULL, NULL, &ipg_clk, &aips_tz1_clk);
-DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
- NULL, NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart4_ipg_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG4_OFFSET,
- NULL, NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart5_ipg_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
- NULL, NULL, &uart_root_clk, &uart1_ipg_clk);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &uart_root_clk, &uart2_ipg_clk);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &uart_root_clk, &uart3_ipg_clk);
-DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG5_OFFSET,
- NULL, NULL, &uart_root_clk, &uart4_ipg_clk);
-DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG7_OFFSET,
- NULL, NULL, &uart_root_clk, &uart5_ipg_clk);
-
-/* GPT */
-DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_clk, &gpt_ipg_clk);
-
-DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-
-/* I2C */
-DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-
-/* FEC */
-DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-
-/* NFC */
-DEFINE_CLOCK_CCGR(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET,
- clk_nfc, &emi_slow_clk, NULL);
-
-/* SSI */
-DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk);
-DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET,
- NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk);
-DEFINE_CLOCK(ssi3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG12_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi3_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG13_OFFSET,
- NULL, NULL, &pll3_sw_clk, &ssi3_ipg_clk);
-
-/* eCSPI */
-DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
- &ipg_clk, &spba_clk);
-DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk);
-DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET,
- NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
- &ipg_clk, &aips_tz2_clk);
-DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET,
- NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk);
-
-/* CSPI */
-DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_clk, &aips_tz2_clk);
-DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET,
- NULL, NULL, &ipg_clk, &cspi_ipg_clk);
-
-/* SDMA */
-DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET,
- NULL, NULL, &ahb_clk, NULL);
-
-/* eSDHC */
-DEFINE_CLOCK_FULL(esdhc1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG0_OFFSET,
- NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_MAX(esdhc1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG1_OFFSET,
- clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk);
-DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
- NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_FULL(esdhc3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG4_OFFSET,
- NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_FULL(esdhc4_ipg_clk, 3, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-
-/* mx51 specific */
-DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
- clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
-
-static struct clk esdhc3_clk = {
- .id = 2,
- .parent = &esdhc1_clk,
- .set_parent = clk_esdhc3_set_parent,
- .enable_reg = MXC_CCM_CCGR3,
- .enable_shift = MXC_CCM_CCGRx_CG5_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
- .secondary = &esdhc3_ipg_clk,
-};
-static struct clk esdhc4_clk = {
- .id = 3,
- .parent = &esdhc1_clk,
- .set_parent = clk_esdhc4_set_parent,
- .enable_reg = MXC_CCM_CCGR3,
- .enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
- .secondary = &esdhc4_ipg_clk,
-};
-
-/* mx53 specific */
-static struct clk esdhc2_mx53_clk = {
- .id = 2,
- .parent = &esdhc1_clk,
- .set_parent = clk_esdhc2_mx53_set_parent,
- .enable_reg = MXC_CCM_CCGR3,
- .enable_shift = MXC_CCM_CCGRx_CG3_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
- .secondary = &esdhc3_ipg_clk,
-};
-
-DEFINE_CLOCK_MAX(esdhc3_mx53_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG5_OFFSET,
- clk_esdhc3_mx53, &pll2_sw_clk, &esdhc2_ipg_clk);
-
-static struct clk esdhc4_mx53_clk = {
- .id = 3,
- .parent = &esdhc1_clk,
- .set_parent = clk_esdhc4_mx53_set_parent,
- .enable_reg = MXC_CCM_CCGR3,
- .enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
- .secondary = &esdhc4_ipg_clk,
-};
-
-static struct clk sata_clk = {
- .parent = &ipg_clk,
- .enable = _clk_max_enable,
- .enable_reg = MXC_CCM_CCGR4,
- .enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
- .disable = _clk_max_disable,
-};
-
-static struct clk ahci_phy_clk = {
- .parent = &usb_phy1_clk,
-};
-
-static struct clk ahci_dma_clk = {
- .parent = &ahb_clk,
-};
-
-DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
-DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
-DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
-
-/* IPU */
-DEFINE_CLOCK_FULL(ipu_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG5_OFFSET,
- NULL, NULL, clk_ipu_enable, clk_ipu_disable, &ahb_clk, &ipu_sec_clk);
-
-DEFINE_CLOCK_FULL(emi_fast_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG7_OFFSET,
- NULL, NULL, _clk_ccgr_enable, _clk_ccgr_disable_inwait,
- &ddr_clk, NULL);
-
-DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET,
- NULL, NULL, &pll3_sw_clk, NULL);
-DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &pll3_sw_clk, NULL);
-
-/* PATA */
-DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG0_OFFSET,
- NULL, NULL, &ipg_clk, &spba_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup mx51_lookups[] = {
- /* i.mx51 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- /* i.mx51 has the i.mx27 type fec */
- _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk)
- _REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_ahb_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_phy1", usb_phy1_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_ahb_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usboh3_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
- _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
- _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
- /* i.mx51 has the i.mx35 type sdma */
- _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
- _REGISTER_CLOCK(NULL, "ckih", ckih_clk)
- _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
- _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk)
- _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
- _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
- /* i.mx51 has the i.mx35 type cspi */
- _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx51.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx51.1", NULL, esdhc2_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx51.2", NULL, esdhc3_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx51.3", NULL, esdhc4_clk)
- _REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
- _REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
- _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
- _REGISTER_CLOCK(NULL, "mipi_hsp", mipi_hsp_clk)
- _REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
- _REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
- _REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
- _REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
- _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-};
-
-static struct clk_lookup mx53_lookups[] = {
- /* i.mx53 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- /* i.mx53 has the i.mx25 type fec */
- _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk)
- /* i.mx53 has the i.mx51 type ecspi */
- _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
- _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
- /* i.mx53 has the i.mx25 type cspi */
- _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx53.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx53.1", NULL, esdhc2_mx53_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx53.2", NULL, esdhc3_mx53_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx53.3", NULL, esdhc4_mx53_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
- _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
- /* i.mx53 has the i.mx35 type sdma */
- _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
- _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
- _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
- _REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
- _REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
- _REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
-};
-
-static void clk_tree_init(void)
-{
- u32 reg;
-
- ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
-
- /*
- * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
- * 8MHz, its derived from lp_apm.
- *
- * FIXME: Verify if true for all boards
- */
- reg = __raw_readl(MXC_CCM_CBCDR);
- reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
- reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
- reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
- reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
- __raw_writel(reg, MXC_CCM_CBCDR);
-}
-
-int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
- unsigned long ckih1, unsigned long ckih2)
-{
- int i;
-
- external_low_reference = ckil;
- external_high_reference = ckih1;
- ckih2_reference = ckih2;
- oscillator_reference = osc;
-
- for (i = 0; i < ARRAY_SIZE(mx51_lookups); i++)
- clkdev_add(&mx51_lookups[i]);
-
- clk_tree_init();
-
- clk_enable(&cpu_clk);
- clk_enable(&main_bus_clk);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX51", mx51_revision());
- clk_disable(&iim_clk);
-
- /* move usb_phy_clk to 24MHz */
- clk_set_parent(&usb_phy1_clk, &osc_clk);
-
- /* set the usboh3_clk parent to pll2_sw_clk */
- clk_set_parent(&usboh3_clk, &pll2_sw_clk);
-
- /* Set SDHC parents to be PLL2 */
- clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
- clk_set_parent(&esdhc2_clk, &pll2_sw_clk);
-
- /* set SDHC root clock as 166.25MHZ*/
- clk_set_rate(&esdhc1_clk, 166250000);
- clk_set_rate(&esdhc2_clk, 166250000);
-
- /* System timer */
- mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
- MX51_INT_GPT);
- return 0;
-}
-
-int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
- unsigned long ckih1, unsigned long ckih2)
-{
- int i;
-
- external_low_reference = ckil;
- external_high_reference = ckih1;
- ckih2_reference = ckih2;
- oscillator_reference = osc;
-
- for (i = 0; i < ARRAY_SIZE(mx53_lookups); i++)
- clkdev_add(&mx53_lookups[i]);
-
- clk_tree_init();
-
- clk_set_parent(&uart_root_clk, &pll3_sw_clk);
- clk_enable(&cpu_clk);
- clk_enable(&main_bus_clk);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX53", mx53_revision());
- clk_disable(&iim_clk);
-
- /* Set SDHC parents to be PLL2 */
- clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
- clk_set_parent(&esdhc3_mx53_clk, &pll2_sw_clk);
-
- /* set SDHC root clock as 200MHZ*/
- clk_set_rate(&esdhc1_clk, 200000000);
- clk_set_rate(&esdhc3_mx53_clk, 200000000);
-
- /* System timer */
- mxc_timer_init(&gpt_clk, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
- MX53_INT_GPT);
- return 0;
-}
-
-static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
- unsigned long *ckih1, unsigned long *ckih2)
-{
- struct device_node *np;
-
- /* retrieve the freqency of fixed clocks from device tree */
- for_each_compatible_node(np, NULL, "fixed-clock") {
- u32 rate;
- if (of_property_read_u32(np, "clock-frequency", &rate))
- continue;
-
- if (of_device_is_compatible(np, "fsl,imx-ckil"))
- *ckil = rate;
- else if (of_device_is_compatible(np, "fsl,imx-osc"))
- *osc = rate;
- else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
- *ckih1 = rate;
- else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
- *ckih2 = rate;
- }
-}
-
-int __init mx51_clocks_init_dt(void)
-{
- unsigned long ckil, osc, ckih1, ckih2;
-
- clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
- return mx51_clocks_init(ckil, osc, ckih1, ckih2);
-}
-
-int __init mx53_clocks_init_dt(void)
-{
- unsigned long ckil, osc, ckih1, ckih2;
-
- clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
- return mx53_clocks_init(ckil, osc, ckih1, ckih2);
-}
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
deleted file mode 100644
index 5c5328257dc..00000000000
--- a/arch/arm/mach-mx5/cpu.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * This file contains the CPU initialization code.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <mach/hardware.h>
-#include <asm/io.h>
-
-static int mx5_cpu_rev = -1;
-
-#define IIM_SREV 0x24
-#define MX50_HW_ADADIG_DIGPROG 0xB0
-
-static int get_mx51_srev(void)
-{
- void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
- u32 rev = readl(iim_base + IIM_SREV) & 0xff;
-
- switch (rev) {
- case 0x0:
- return IMX_CHIP_REVISION_2_0;
- case 0x10:
- return IMX_CHIP_REVISION_3_0;
- default:
- return IMX_CHIP_REVISION_UNKNOWN;
- }
-}
-
-/*
- * Returns:
- * the silicon revision of the cpu
- * -EINVAL - not a mx51
- */
-int mx51_revision(void)
-{
- if (!cpu_is_mx51())
- return -EINVAL;
-
- if (mx5_cpu_rev == -1)
- mx5_cpu_rev = get_mx51_srev();
-
- return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx51_revision);
-
-#ifdef CONFIG_NEON
-
-/*
- * All versions of the silicon before Rev. 3 have broken NEON implementations.
- * Dependent on link order - so the assumption is that vfp_init is called
- * before us.
- */
-static int __init mx51_neon_fixup(void)
-{
- if (!cpu_is_mx51())
- return 0;
-
- if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
- elf_hwcap &= ~HWCAP_NEON;
- pr_info("Turning off NEON support, detected broken NEON implementation\n");
- }
- return 0;
-}
-
-late_initcall(mx51_neon_fixup);
-#endif
-
-static int get_mx53_srev(void)
-{
- void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR);
- u32 rev = readl(iim_base + IIM_SREV) & 0xff;
-
- switch (rev) {
- case 0x0:
- return IMX_CHIP_REVISION_1_0;
- case 0x2:
- return IMX_CHIP_REVISION_2_0;
- case 0x3:
- return IMX_CHIP_REVISION_2_1;
- default:
- return IMX_CHIP_REVISION_UNKNOWN;
- }
-}
-
-/*
- * Returns:
- * the silicon revision of the cpu
- * -EINVAL - not a mx53
- */
-int mx53_revision(void)
-{
- if (!cpu_is_mx53())
- return -EINVAL;
-
- if (mx5_cpu_rev == -1)
- mx5_cpu_rev = get_mx53_srev();
-
- return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx53_revision);
-
-static int get_mx50_srev(void)
-{
- void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K);
- u32 rev;
-
- if (!anatop) {
- mx5_cpu_rev = -EINVAL;
- return 0;
- }
-
- rev = readl(anatop + MX50_HW_ADADIG_DIGPROG);
- rev &= 0xff;
-
- iounmap(anatop);
- if (rev == 0x0)
- return IMX_CHIP_REVISION_1_0;
- else if (rev == 0x1)
- return IMX_CHIP_REVISION_1_1;
- return 0;
-}
-
-/*
- * Returns:
- * the silicon revision of the cpu
- * -EINVAL - not a mx50
- */
-int mx50_revision(void)
-{
- if (!cpu_is_mx50())
- return -EINVAL;
-
- if (mx5_cpu_rev == -1)
- mx5_cpu_rev = get_mx50_srev();
-
- return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx50_revision);
-
-static int __init post_cpu_init(void)
-{
- unsigned int reg;
- void __iomem *base;
-
- if (cpu_is_mx51() || cpu_is_mx53()) {
- if (cpu_is_mx51())
- base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
- else
- base = MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR);
-
- __raw_writel(0x0, base + 0x40);
- __raw_writel(0x0, base + 0x44);
- __raw_writel(0x0, base + 0x48);
- __raw_writel(0x0, base + 0x4C);
- reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
- __raw_writel(reg, base + 0x50);
-
- if (cpu_is_mx51())
- base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
- else
- base = MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR);
-
- __raw_writel(0x0, base + 0x40);
- __raw_writel(0x0, base + 0x44);
- __raw_writel(0x0, base + 0x48);
- __raw_writel(0x0, base + 0x4C);
- reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
- __raw_writel(reg, base + 0x50);
- }
-
- return 0;
-}
-
-postcore_initcall(post_cpu_init);
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-mx5/cpu_op-mx51.c
deleted file mode 100644
index 9d34c3d4c02..00000000000
--- a/arch/arm/mach-mx5/cpu_op-mx51.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/types.h>
-#include <mach/hardware.h>
-#include <linux/kernel.h>
-
-static struct cpu_op mx51_cpu_op[] = {
- {
- .cpu_rate = 160000000,},
- {
- .cpu_rate = 800000000,},
-};
-
-struct cpu_op *mx51_get_cpu_op(int *op)
-{
- *op = ARRAY_SIZE(mx51_cpu_op);
- return mx51_cpu_op;
-}
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-mx5/cpu_op-mx51.h
deleted file mode 100644
index 97477fecb46..00000000000
--- a/arch/arm/mach-mx5/cpu_op-mx51.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-extern struct cpu_op *mx51_get_cpu_op(int *op);
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
deleted file mode 100644
index 5e11ba7daee..00000000000
--- a/arch/arm/mach-mx5/crm_regs.h
+++ /dev/null
@@ -1,600 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
-
-#define MX51_CCM_BASE MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
-#define MX51_DPLL1_BASE MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
-#define MX51_DPLL2_BASE MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
-#define MX51_DPLL3_BASE MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
-#define MX51_CORTEXA8_BASE MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
-#define MX51_GPC_BASE MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
-
-/*MX53*/
-#define MX53_CCM_BASE MX53_IO_ADDRESS(MX53_CCM_BASE_ADDR)
-#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
-#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
-#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-
-/* PLL Register Offsets */
-#define MXC_PLL_DP_CTL 0x00
-#define MXC_PLL_DP_CONFIG 0x04
-#define MXC_PLL_DP_OP 0x08
-#define MXC_PLL_DP_MFD 0x0C
-#define MXC_PLL_DP_MFN 0x10
-#define MXC_PLL_DP_MFNMINUS 0x14
-#define MXC_PLL_DP_MFNPLUS 0x18
-#define MXC_PLL_DP_HFS_OP 0x1C
-#define MXC_PLL_DP_HFS_MFD 0x20
-#define MXC_PLL_DP_HFS_MFN 0x24
-#define MXC_PLL_DP_MFN_TOGC 0x28
-#define MXC_PLL_DP_DESTAT 0x2c
-
-/* PLL Register Bit definitions */
-#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000
-#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
-#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12
-#define MXC_PLL_DP_CTL_ADE 0x800
-#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8)
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8
-#define MXC_PLL_DP_CTL_HFSM 0x80
-#define MXC_PLL_DP_CTL_PRE 0x40
-#define MXC_PLL_DP_CTL_UPEN 0x20
-#define MXC_PLL_DP_CTL_RST 0x10
-#define MXC_PLL_DP_CTL_RCP 0x8
-#define MXC_PLL_DP_CTL_PLM 0x4
-#define MXC_PLL_DP_CTL_BRM0 0x2
-#define MXC_PLL_DP_CTL_LRF 0x1
-
-#define MXC_PLL_DP_CONFIG_BIST 0x8
-#define MXC_PLL_DP_CONFIG_SJC_CE 0x4
-#define MXC_PLL_DP_CONFIG_AREN 0x2
-#define MXC_PLL_DP_CONFIG_LDREQ 0x1
-
-#define MXC_PLL_DP_OP_MFI_OFFSET 4
-#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4)
-#define MXC_PLL_DP_OP_PDF_OFFSET 0
-#define MXC_PLL_DP_OP_PDF_MASK 0xF
-
-#define MXC_PLL_DP_MFD_OFFSET 0
-#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_OFFSET 0x0
-#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17)
-#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16)
-#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0
-#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF
-
-#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31)
-#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF
-
-/* Register addresses of CCM*/
-#define MXC_CCM_CCR (MX51_CCM_BASE + 0x00)
-#define MXC_CCM_CCDR (MX51_CCM_BASE + 0x04)
-#define MXC_CCM_CSR (MX51_CCM_BASE + 0x08)
-#define MXC_CCM_CCSR (MX51_CCM_BASE + 0x0C)
-#define MXC_CCM_CACRR (MX51_CCM_BASE + 0x10)
-#define MXC_CCM_CBCDR (MX51_CCM_BASE + 0x14)
-#define MXC_CCM_CBCMR (MX51_CCM_BASE + 0x18)
-#define MXC_CCM_CSCMR1 (MX51_CCM_BASE + 0x1C)
-#define MXC_CCM_CSCMR2 (MX51_CCM_BASE + 0x20)
-#define MXC_CCM_CSCDR1 (MX51_CCM_BASE + 0x24)
-#define MXC_CCM_CS1CDR (MX51_CCM_BASE + 0x28)
-#define MXC_CCM_CS2CDR (MX51_CCM_BASE + 0x2C)
-#define MXC_CCM_CDCDR (MX51_CCM_BASE + 0x30)
-#define MXC_CCM_CHSCDR (MX51_CCM_BASE + 0x34)
-#define MXC_CCM_CSCDR2 (MX51_CCM_BASE + 0x38)
-#define MXC_CCM_CSCDR3 (MX51_CCM_BASE + 0x3C)
-#define MXC_CCM_CSCDR4 (MX51_CCM_BASE + 0x40)
-#define MXC_CCM_CWDR (MX51_CCM_BASE + 0x44)
-#define MXC_CCM_CDHIPR (MX51_CCM_BASE + 0x48)
-#define MXC_CCM_CDCR (MX51_CCM_BASE + 0x4C)
-#define MXC_CCM_CTOR (MX51_CCM_BASE + 0x50)
-#define MXC_CCM_CLPCR (MX51_CCM_BASE + 0x54)
-#define MXC_CCM_CISR (MX51_CCM_BASE + 0x58)
-#define MXC_CCM_CIMR (MX51_CCM_BASE + 0x5C)
-#define MXC_CCM_CCOSR (MX51_CCM_BASE + 0x60)
-#define MXC_CCM_CGPR (MX51_CCM_BASE + 0x64)
-#define MXC_CCM_CCGR0 (MX51_CCM_BASE + 0x68)
-#define MXC_CCM_CCGR1 (MX51_CCM_BASE + 0x6C)
-#define MXC_CCM_CCGR2 (MX51_CCM_BASE + 0x70)
-#define MXC_CCM_CCGR3 (MX51_CCM_BASE + 0x74)
-#define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78)
-#define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C)
-#define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80)
-#define MXC_CCM_CCGR7 (MX51_CCM_BASE + 0x84)
-
-#define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84)
-
-/* Define the bits in register CCR */
-#define MXC_CCM_CCR_COSC_EN (1 << 12)
-#define MXC_CCM_CCR_FPM_MULT_MASK (1 << 11)
-#define MXC_CCM_CCR_CAMP2_EN (1 << 10)
-#define MXC_CCM_CCR_CAMP1_EN (1 << 9)
-#define MXC_CCM_CCR_FPM_EN (1 << 8)
-#define MXC_CCM_CCR_OSCNT_OFFSET (0)
-#define MXC_CCM_CCR_OSCNT_MASK (0xFF)
-
-/* Define the bits in register CCDR */
-#define MXC_CCM_CCDR_HSC_HS_MASK (0x1 << 18)
-#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17)
-#define MXC_CCM_CCDR_EMI_HS_MASK (0x1 << 16)
-
-/* Define the bits in register CSR */
-#define MXC_CCM_CSR_COSR_READY (1 << 5)
-#define MXC_CCM_CSR_LVS_VALUE (1 << 4)
-#define MXC_CCM_CSR_CAMP2_READY (1 << 3)
-#define MXC_CCM_CSR_CAMP1_READY (1 << 2)
-#define MXC_CCM_CSR_FPM_READY (1 << 1)
-#define MXC_CCM_CSR_REF_EN_B (1 << 0)
-
-/* Define the bits in register CCSR */
-#define MXC_CCM_CCSR_LP_APM_SEL (0x1 << 9)
-#define MXC_CCM_CCSR_STEP_SEL_OFFSET (7)
-#define MXC_CCM_CCSR_STEP_SEL_MASK (0x3 << 7)
-#define MXC_CCM_CCSR_STEP_SEL_LP_APM 0
-#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS 1 /* Only when JTAG connected? */
-#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
-#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
-#define MXC_CCM_CCSR_PLL2_PODF_OFFSET (5)
-#define MXC_CCM_CCSR_PLL2_PODF_MASK (0x3 << 5)
-#define MXC_CCM_CCSR_PLL3_PODF_OFFSET (3)
-#define MXC_CCM_CCSR_PLL3_PODF_MASK (0x3 << 3)
-#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL (1 << 2) /* 0: pll1_main_clk,
- 1: step_clk */
-#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL (1 << 1)
-#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL (1 << 0)
-
-/* Define the bits in register CACRR */
-#define MXC_CCM_CACRR_ARM_PODF_OFFSET (0)
-#define MXC_CCM_CACRR_ARM_PODF_MASK (0x7)
-
-/* Define the bits in register CBCDR */
-#define MXC_CCM_CBCDR_EMI_CLK_SEL (0x1 << 26)
-#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (0x1 << 25)
-#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET (30)
-#define MXC_CCM_CBCDR_DDR_HF_SEL (0x1 << 30)
-#define MXC_CCM_CBCDR_DDR_PODF_OFFSET (27)
-#define MXC_CCM_CBCDR_DDR_PODF_MASK (0x7 << 27)
-#define MXC_CCM_CBCDR_EMI_PODF_OFFSET (22)
-#define MXC_CCM_CBCDR_EMI_PODF_MASK (0x7 << 22)
-#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET (19)
-#define MXC_CCM_CBCDR_AXI_B_PODF_MASK (0x7 << 19)
-#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET (16)
-#define MXC_CCM_CBCDR_AXI_A_PODF_MASK (0x7 << 16)
-#define MXC_CCM_CBCDR_NFC_PODF_OFFSET (13)
-#define MXC_CCM_CBCDR_NFC_PODF_MASK (0x7 << 13)
-#define MXC_CCM_CBCDR_AHB_PODF_OFFSET (10)
-#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10)
-#define MXC_CCM_CBCDR_IPG_PODF_OFFSET (8)
-#define MXC_CCM_CBCDR_IPG_PODF_MASK (0x3 << 8)
-#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET (6)
-#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK (0x3 << 6)
-#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET (3)
-#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK (0x7 << 3)
-#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET (0)
-#define MXC_CCM_CBCDR_PERCLK_PODF_MASK (0x7)
-
-/* Define the bits in register CBCMR */
-#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET (12)
-#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK (0x3 << 12)
-#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET (10)
-#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK (0x3 << 10)
-#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET (8)
-#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK (0x3 << 8)
-#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET (6)
-#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK (0x3 << 6)
-#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET (4)
-#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK (0x3 << 4)
-#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL (0x1 << 1)
-#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL (0x1 << 0)
-
-/* Define the bits in register CSCMR1 */
-#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET (30)
-#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK (0x3 << 30)
-#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET (28)
-#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK (0x3 << 28)
-#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET (26)
-#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL (0x1 << 26)
-#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET (24)
-#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK (0x3 << 24)
-#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET (22)
-#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK (0x3 << 22)
-#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET (20)
-#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK (0x3 << 20)
-#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL (0x1 << 19)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL (0x1 << 19)
-#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL (0x1 << 18)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET (16)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_OFFSET (16)
-#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET (12)
-#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK (0x3 << 12)
-#define MXC_CCM_CSCMR1_SSI3_CLK_SEL (0x1 << 11)
-#define MXC_CCM_CSCMR1_VPU_RCLK_SEL (0x1 << 10)
-#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET (8)
-#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK (0x3 << 8)
-#define MXC_CCM_CSCMR1_TVE_CLK_SEL (0x1 << 7)
-#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL (0x1 << 6)
-#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET (4)
-#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK (0x3 << 4)
-#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET (2)
-#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK (0x3 << 2)
-#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL (0x1 << 1)
-#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL (0x1)
-
-/* Define the bits in register CSCMR2 */
-#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n) (26+n*3)
-#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n) (0x7 << (26+n*3))
-#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET (24)
-#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK (0x3 << 24)
-#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET (22)
-#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK (0x3 << 22)
-#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET (20)
-#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK (0x3 << 20)
-#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET (18)
-#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK (0x3 << 18)
-#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET (16)
-#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET (12)
-#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK (0x3 << 12)
-#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET (10)
-#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK (0x3 << 10)
-#define MXC_CCM_CSCMR2_SLIMBUS_COM (0x1 << 9)
-#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET (6)
-#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK (0x7 << 6)
-#define MXC_CCM_CSCMR2_SPDIF1_COM (1 << 5)
-#define MXC_CCM_CSCMR2_SPDIF0_COM (1 << 4)
-#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET (2)
-#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK (0x3 << 2)
-#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET (0)
-#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK (0x3)
-
-/* Define the bits in register CSCDR1 */
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK (0x7 << 19)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_MASK (0x7 << 19)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET (14)
-#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK (0x3 << 14)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET (11)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK (0x7 << 11)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET (8)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET (6)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
-#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET (3)
-#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK (0x7 << 3)
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK (0x7)
-
-/* Define the bits in register CS1CDR and CS2CDR */
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET (16)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK (0x3F << 16)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK (0x3F)
-
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET (16)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK (0x3F << 16)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK (0x3F)
-
-/* Define the bits in register CDCDR */
-#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET (28)
-#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK (0x7 << 28)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET (25)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x3F << 19)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET (3)
-#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK (0x7 << 3)
-#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET (0)
-#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK (0x7)
-
-/* Define the bits in register CHSCCDR */
-#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET (12)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK (0x7 << 12)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET (6)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK (0x3F << 6)
-#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET (3)
-#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK (0x7 << 3)
-#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK (0x7)
-
-/* Define the bits in register CSCDR2 */
-#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET (25)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK (0x7 << 25)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK (0x3F << 19)
-#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK (0x3F)
-
-/* Define the bits in register CSCDR3 */
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK (0x3F)
-
-/* Define the bits in register CSCDR4 */
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK (0x3F)
-
-/* Define the bits in register CDHIPR */
-#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16)
-#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY (1 << 8)
-#define MXC_CCM_CDHIPR_DDR_PODF_BUSY (1 << 7)
-#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY (1 << 6)
-#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5)
-#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY (1 << 4)
-#define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 3)
-#define MXC_CCM_CDHIPR_EMI_PODF_BUSY (1 << 2)
-#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY (1 << 1)
-#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY (1 << 0)
-
-/* Define the bits in register CDCR */
-#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER (0x1 << 2)
-#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET (0)
-#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK (0x3)
-
-/* Define the bits in register CLPCR */
-#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23)
-#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22)
-#define MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21)
-#define MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 25)
-#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20)
-#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19)
-#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18)
-#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS (0x1 << 17)
-#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS (0x1 << 16)
-#define MXC_CCM_CLPCR_COSC_PWRDOWN (0x1 << 11)
-#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET (9)
-#define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9)
-#define MXC_CCM_CLPCR_VSTBY (0x1 << 8)
-#define MXC_CCM_CLPCR_DIS_REF_OSC (0x1 << 7)
-#define MXC_CCM_CLPCR_SBYOS (0x1 << 6)
-#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
-#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET (3)
-#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3)
-#define MXC_CCM_CLPCR_LPM_OFFSET (0)
-#define MXC_CCM_CLPCR_LPM_MASK (0x3)
-
-/* Define the bits in register CISR */
-#define MXC_CCM_CISR_ARM_PODF_LOADED (0x1 << 25)
-#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
-#define MXC_CCM_CISR_AHB_PODF_LOADED (0x1 << 20)
-#define MXC_CCM_CISR_EMI_PODF_LOADED (0x1 << 19)
-#define MXC_CCM_CISR_AXI_B_PODF_LOADED (0x1 << 18)
-#define MXC_CCM_CISR_AXI_A_PODF_LOADED (0x1 << 17)
-#define MXC_CCM_CISR_DIVIDER_LOADED (0x1 << 16)
-#define MXC_CCM_CISR_COSC_READY (0x1 << 6)
-#define MXC_CCM_CISR_CKIH2_READY (0x1 << 5)
-#define MXC_CCM_CISR_CKIH_READY (0x1 << 4)
-#define MXC_CCM_CISR_FPM_READY (0x1 << 3)
-#define MXC_CCM_CISR_LRF_PLL3 (0x1 << 2)
-#define MXC_CCM_CISR_LRF_PLL2 (0x1 << 1)
-#define MXC_CCM_CISR_LRF_PLL1 (0x1)
-
-/* Define the bits in register CIMR */
-#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (0x1 << 25)
-#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
-#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED (0x1 << 20)
-#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED (0x1 << 19)
-#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED (0x1 << 18)
-#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED (0x1 << 17)
-#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED (0x1 << 16)
-#define MXC_CCM_CIMR_MASK_COSC_READY (0x1 << 5)
-#define MXC_CCM_CIMR_MASK_CKIH_READY (0x1 << 4)
-#define MXC_CCM_CIMR_MASK_FPM_READY (0x1 << 3)
-#define MXC_CCM_CIMR_MASK_LRF_PLL3 (0x1 << 2)
-#define MXC_CCM_CIMR_MASK_LRF_PLL2 (0x1 << 1)
-#define MXC_CCM_CIMR_MASK_LRF_PLL1 (0x1)
-
-/* Define the bits in register CCOSR */
-#define MXC_CCM_CCOSR_CKO2_EN_OFFSET (0x1 << 24)
-#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET (21)
-#define MXC_CCM_CCOSR_CKO2_DIV_MASK (0x7 << 21)
-#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET (16)
-#define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16)
-#define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7)
-#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET (4)
-#define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4)
-#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET (0)
-#define MXC_CCM_CCOSR_CKOL_SEL_MASK (0xF)
-
-/* Define the bits in registers CGPR */
-#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (0x1 << 4)
-#define MXC_CCM_CGPR_FPM_SEL (0x1 << 3)
-#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET (0)
-#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK (0x7)
-
-/* Define the bits in registers CCGRx */
-#define MXC_CCM_CCGRx_CG_MASK 0x3
-#define MXC_CCM_CCGRx_MOD_OFF 0x0
-#define MXC_CCM_CCGRx_MOD_ON 0x3
-#define MXC_CCM_CCGRx_MOD_IDLE 0x1
-
-#define MXC_CCM_CCGRx_CG15_MASK (0x3 << 30)
-#define MXC_CCM_CCGRx_CG14_MASK (0x3 << 28)
-#define MXC_CCM_CCGRx_CG13_MASK (0x3 << 26)
-#define MXC_CCM_CCGRx_CG12_MASK (0x3 << 24)
-#define MXC_CCM_CCGRx_CG11_MASK (0x3 << 22)
-#define MXC_CCM_CCGRx_CG10_MASK (0x3 << 20)
-#define MXC_CCM_CCGRx_CG9_MASK (0x3 << 18)
-#define MXC_CCM_CCGRx_CG8_MASK (0x3 << 16)
-#define MXC_CCM_CCGRx_CG5_MASK (0x3 << 10)
-#define MXC_CCM_CCGRx_CG4_MASK (0x3 << 8)
-#define MXC_CCM_CCGRx_CG3_MASK (0x3 << 6)
-#define MXC_CCM_CCGRx_CG2_MASK (0x3 << 4)
-#define MXC_CCM_CCGRx_CG1_MASK (0x3 << 2)
-#define MXC_CCM_CCGRx_CG0_MASK (0x3 << 0)
-
-#define MXC_CCM_CCGRx_CG15_OFFSET 30
-#define MXC_CCM_CCGRx_CG14_OFFSET 28
-#define MXC_CCM_CCGRx_CG13_OFFSET 26
-#define MXC_CCM_CCGRx_CG12_OFFSET 24
-#define MXC_CCM_CCGRx_CG11_OFFSET 22
-#define MXC_CCM_CCGRx_CG10_OFFSET 20
-#define MXC_CCM_CCGRx_CG9_OFFSET 18
-#define MXC_CCM_CCGRx_CG8_OFFSET 16
-#define MXC_CCM_CCGRx_CG7_OFFSET 14
-#define MXC_CCM_CCGRx_CG6_OFFSET 12
-#define MXC_CCM_CCGRx_CG5_OFFSET 10
-#define MXC_CCM_CCGRx_CG4_OFFSET 8
-#define MXC_CCM_CCGRx_CG3_OFFSET 6
-#define MXC_CCM_CCGRx_CG2_OFFSET 4
-#define MXC_CCM_CCGRx_CG1_OFFSET 2
-#define MXC_CCM_CCGRx_CG0_OFFSET 0
-
-#define MXC_DPTC_LP_BASE (MX51_GPC_BASE + 0x80)
-#define MXC_DPTC_GP_BASE (MX51_GPC_BASE + 0x100)
-#define MXC_DVFS_CORE_BASE (MX51_GPC_BASE + 0x180)
-#define MXC_DPTC_PER_BASE (MX51_GPC_BASE + 0x1C0)
-#define MXC_PGC_IPU_BASE (MX51_GPC_BASE + 0x220)
-#define MXC_PGC_VPU_BASE (MX51_GPC_BASE + 0x240)
-#define MXC_PGC_GPU_BASE (MX51_GPC_BASE + 0x260)
-#define MXC_SRPG_NEON_BASE (MX51_GPC_BASE + 0x280)
-#define MXC_SRPG_ARM_BASE (MX51_GPC_BASE + 0x2A0)
-#define MXC_SRPG_EMPGC0_BASE (MX51_GPC_BASE + 0x2C0)
-#define MXC_SRPG_EMPGC1_BASE (MX51_GPC_BASE + 0x2D0)
-#define MXC_SRPG_MEGAMIX_BASE (MX51_GPC_BASE + 0x2E0)
-#define MXC_SRPG_EMI_BASE (MX51_GPC_BASE + 0x300)
-
-/* CORTEXA8 platform */
-#define MXC_CORTEXA8_PLAT_PVID (MX51_CORTEXA8_BASE + 0x0)
-#define MXC_CORTEXA8_PLAT_GPC (MX51_CORTEXA8_BASE + 0x4)
-#define MXC_CORTEXA8_PLAT_PIC (MX51_CORTEXA8_BASE + 0x8)
-#define MXC_CORTEXA8_PLAT_LPC (MX51_CORTEXA8_BASE + 0xC)
-#define MXC_CORTEXA8_PLAT_NEON_LPC (MX51_CORTEXA8_BASE + 0x10)
-#define MXC_CORTEXA8_PLAT_ICGC (MX51_CORTEXA8_BASE + 0x14)
-#define MXC_CORTEXA8_PLAT_AMC (MX51_CORTEXA8_BASE + 0x18)
-#define MXC_CORTEXA8_PLAT_NMC (MX51_CORTEXA8_BASE + 0x20)
-#define MXC_CORTEXA8_PLAT_NMS (MX51_CORTEXA8_BASE + 0x24)
-
-/* DVFS CORE */
-#define MXC_DVFSTHRS (MXC_DVFS_CORE_BASE + 0x00)
-#define MXC_DVFSCOUN (MXC_DVFS_CORE_BASE + 0x04)
-#define MXC_DVFSSIG1 (MXC_DVFS_CORE_BASE + 0x08)
-#define MXC_DVFSSIG0 (MXC_DVFS_CORE_BASE + 0x0C)
-#define MXC_DVFSGPC0 (MXC_DVFS_CORE_BASE + 0x10)
-#define MXC_DVFSGPC1 (MXC_DVFS_CORE_BASE + 0x14)
-#define MXC_DVFSGPBT (MXC_DVFS_CORE_BASE + 0x18)
-#define MXC_DVFSEMAC (MXC_DVFS_CORE_BASE + 0x1C)
-#define MXC_DVFSCNTR (MXC_DVFS_CORE_BASE + 0x20)
-#define MXC_DVFSLTR0_0 (MXC_DVFS_CORE_BASE + 0x24)
-#define MXC_DVFSLTR0_1 (MXC_DVFS_CORE_BASE + 0x28)
-#define MXC_DVFSLTR1_0 (MXC_DVFS_CORE_BASE + 0x2C)
-#define MXC_DVFSLTR1_1 (MXC_DVFS_CORE_BASE + 0x30)
-#define MXC_DVFSPT0 (MXC_DVFS_CORE_BASE + 0x34)
-#define MXC_DVFSPT1 (MXC_DVFS_CORE_BASE + 0x38)
-#define MXC_DVFSPT2 (MXC_DVFS_CORE_BASE + 0x3C)
-#define MXC_DVFSPT3 (MXC_DVFS_CORE_BASE + 0x40)
-
-/* GPC */
-#define MXC_GPC_CNTR (MX51_GPC_BASE + 0x0)
-#define MXC_GPC_PGR (MX51_GPC_BASE + 0x4)
-#define MXC_GPC_VCR (MX51_GPC_BASE + 0x8)
-#define MXC_GPC_ALL_PU (MX51_GPC_BASE + 0xC)
-#define MXC_GPC_NEON (MX51_GPC_BASE + 0x10)
-#define MXC_GPC_PGR_ARMPG_OFFSET 8
-#define MXC_GPC_PGR_ARMPG_MASK (3 << 8)
-
-/* PGC */
-#define MXC_PGC_IPU_PGCR (MXC_PGC_IPU_BASE + 0x0)
-#define MXC_PGC_IPU_PGSR (MXC_PGC_IPU_BASE + 0xC)
-#define MXC_PGC_VPU_PGCR (MXC_PGC_VPU_BASE + 0x0)
-#define MXC_PGC_VPU_PGSR (MXC_PGC_VPU_BASE + 0xC)
-#define MXC_PGC_GPU_PGCR (MXC_PGC_GPU_BASE + 0x0)
-#define MXC_PGC_GPU_PGSR (MXC_PGC_GPU_BASE + 0xC)
-
-#define MXC_PGCR_PCR 1
-#define MXC_SRPGCR_PCR 1
-#define MXC_EMPGCR_PCR 1
-#define MXC_PGSR_PSR 1
-
-
-#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0)
-#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1)
-
-/* SRPG */
-#define MXC_SRPG_NEON_SRPGCR (MXC_SRPG_NEON_BASE + 0x0)
-#define MXC_SRPG_NEON_PUPSCR (MXC_SRPG_NEON_BASE + 0x4)
-#define MXC_SRPG_NEON_PDNSCR (MXC_SRPG_NEON_BASE + 0x8)
-
-#define MXC_SRPG_ARM_SRPGCR (MXC_SRPG_ARM_BASE + 0x0)
-#define MXC_SRPG_ARM_PUPSCR (MXC_SRPG_ARM_BASE + 0x4)
-#define MXC_SRPG_ARM_PDNSCR (MXC_SRPG_ARM_BASE + 0x8)
-
-#define MXC_SRPG_EMPGC0_SRPGCR (MXC_SRPG_EMPGC0_BASE + 0x0)
-#define MXC_SRPG_EMPGC0_PUPSCR (MXC_SRPG_EMPGC0_BASE + 0x4)
-#define MXC_SRPG_EMPGC0_PDNSCR (MXC_SRPG_EMPGC0_BASE + 0x8)
-
-#define MXC_SRPG_EMPGC1_SRPGCR (MXC_SRPG_EMPGC1_BASE + 0x0)
-#define MXC_SRPG_EMPGC1_PUPSCR (MXC_SRPG_EMPGC1_BASE + 0x4)
-#define MXC_SRPG_EMPGC1_PDNSCR (MXC_SRPG_EMPGC1_BASE + 0x8)
-
-#define MXC_SRPG_MEGAMIX_SRPGCR (MXC_SRPG_MEGAMIX_BASE + 0x0)
-#define MXC_SRPG_MEGAMIX_PUPSCR (MXC_SRPG_MEGAMIX_BASE + 0x4)
-#define MXC_SRPG_MEGAMIX_PDNSCR (MXC_SRPG_MEGAMIX_BASE + 0x8)
-
-#define MXC_SRPGC_EMI_SRPGCR (MXC_SRPGC_EMI_BASE + 0x0)
-#define MXC_SRPGC_EMI_PUPSCR (MXC_SRPGC_EMI_BASE + 0x4)
-#define MXC_SRPGC_EMI_PDNSCR (MXC_SRPGC_EMI_BASE + 0x8)
-
-#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-mx5/devices-imx50.h
deleted file mode 100644
index 7216667eaaf..00000000000
--- a/arch/arm/mach-mx5/devices-imx50.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <mach/mx50.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
-#define imx50_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
-
-extern const struct imx_fec_data imx50_fec_data;
-#define imx50_add_fec(pdata) \
- imx_add_fec(&imx50_fec_data, pdata)
-
-extern const struct imx_imx_i2c_data imx50_imx_i2c_data[];
-#define imx50_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
deleted file mode 100644
index af488bc0e22..00000000000
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx51.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx51_fec_data;
-#define imx51_add_fec(pdata) \
- imx_add_fec(&imx51_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
-#define imx51_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
-#define imx51_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
-#define imx51_add_hsi2c(pdata) \
- imx51_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
-#define imx51_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
-#define imx51_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
-
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
-#define imx51_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
-#define imx51_add_mxc_ehci_hs(id, pdata) \
- imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
-#define imx51_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[];
-#define imx51_add_sdhci_esdhc_imx(id, pdata) \
- imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx51_cspi_data;
-#define imx51_add_cspi(pdata) \
- imx_add_spi_imx(&imx51_cspi_data, pdata)
-
-extern const struct imx_spi_imx_data imx51_ecspi_data[];
-#define imx51_add_ecspi(id, pdata) \
- imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
-#define imx51_add_imx2_wdt(id, pdata) \
- imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
-
-extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
-#define imx51_add_mxc_pwm(id) \
- imx_add_mxc_pwm(&imx51_mxc_pwm_data[id])
-
-extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
-#define imx51_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx51_pata_imx_data;
-#define imx51_add_pata_imx() \
- imx_add_pata_imx(&imx51_pata_imx_data)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
deleted file mode 100644
index 6e1e5d1f8c3..00000000000
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx53.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx53_fec_data;
-#define imx53_add_fec(pdata) \
- imx_add_fec(&imx53_fec_data, pdata)
-
-extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[];
-#define imx53_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
-
-
-extern const struct imx_imx_i2c_data imx53_imx_i2c_data[];
-#define imx53_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[];
-#define imx53_add_sdhci_esdhc_imx(id, pdata) \
- imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx53_ecspi_data[];
-#define imx53_add_ecspi(id, pdata) \
- imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
-#define imx53_add_imx2_wdt(id, pdata) \
- imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
-
-extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
-#define imx53_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
-#define imx53_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx53_pata_imx_data;
-#define imx53_add_pata_imx() \
- imx_add_pata_imx(&imx53_pata_imx_data)
-
-extern struct platform_device *__init imx53_add_ahci_imx(void);
diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-mx5/efika.h
deleted file mode 100644
index 014aa985faa..00000000000
--- a/arch/arm/mach-mx5/efika.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _EFIKA_H
-#define _EFIKA_H
-
-#define EFIKA_WLAN_EN IMX_GPIO_NR(2, 16)
-#define EFIKA_WLAN_RESET IMX_GPIO_NR(2, 10)
-#define EFIKA_USB_PHY_RESET IMX_GPIO_NR(2, 9)
-
-void __init efika_board_common_init(void);
-
-#endif
diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-mx5/ehci.c
deleted file mode 100644
index c17fa131728..00000000000
--- a/arch/arm/mach-mx5/ehci.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
-
-#define MXC_OTG_OFFSET 0
-#define MXC_H1_OFFSET 0x200
-#define MXC_H2_OFFSET 0x400
-
-/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */
-
-/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */
-
-/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT (1 << 4)
-
-#define MXC_USBCMD_OFFSET 0x140
-
-/* USBCMD */
-#define MXC_UCMD_ITC_NO_THRESHOLD_MASK (~(0xff << 16)) /* Interrupt Threshold Control */
-
-int mx51_initialize_usb_hw(int port, unsigned int flags)
-{
- unsigned int v;
- void __iomem *usb_base;
- void __iomem *usbotg_base;
- void __iomem *usbother_base;
- int ret = 0;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base) {
- printk(KERN_ERR "%s(): ioremap failed\n", __func__);
- return -ENOMEM;
- }
-
- switch (port) {
- case 0: /* OTG port */
- usbotg_base = usb_base + MXC_OTG_OFFSET;
- break;
- case 1: /* Host 1 port */
- usbotg_base = usb_base + MXC_H1_OFFSET;
- break;
- case 2: /* Host 2 port */
- usbotg_base = usb_base + MXC_H2_OFFSET;
- break;
- default:
- printk(KERN_ERR"%s no such port %d\n", __func__, port);
- ret = -ENOENT;
- goto error;
- }
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- switch (port) {
- case 0: /*OTG port */
- if (flags & MXC_EHCI_INTERNAL_PHY) {
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
- if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
- /* OC/USBPWR is not used */
- v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
- } else {
- /* OC/USBPWR is used */
- v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
- }
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
- v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED)
- v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
- else
- v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v |= MXC_OTG_UCTRL_OPM_BIT;
- else
- v &= ~MXC_OTG_UCTRL_OPM_BIT;
- __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
- }
- break;
- case 1: /* Host 1 */
- /*Host ULPI */
- v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED) {
- /* HOST1 wakeup/ULPI intr enable */
- v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
- } else {
- /* HOST1 wakeup/ULPI intr disable */
- v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
- }
-
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
- else
- v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
- __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
- else
- v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
- v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
- if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
- /* Interrupt Threshold Control:Immediate (no threshold) */
- v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
- __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
- break;
- case 2: /* Host 2 ULPI */
- v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED) {
- /* HOST1 wakeup/ULPI intr enable */
- v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
- } else {
- /* HOST1 wakeup/ULPI intr disable */
- v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
- }
-
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
- else
- v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
- __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
- break;
- }
-
-error:
- iounmap(usb_base);
- return ret;
-}
-
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
deleted file mode 100644
index a6a3ab8f1b1..00000000000
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/leds.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/mach/arch.h>
-
-#include "devices-imx51.h"
-
-#define MBIMX51_TSC2007_GPIO IMX_GPIO_NR(3, 30)
-#define MBIMX51_LED0 IMX_GPIO_NR(3, 5)
-#define MBIMX51_LED1 IMX_GPIO_NR(3, 6)
-#define MBIMX51_LED2 IMX_GPIO_NR(3, 7)
-#define MBIMX51_LED3 IMX_GPIO_NR(3, 8)
-
-static const struct gpio_led mbimx51_leds[] __initconst = {
- {
- .name = "led0",
- .default_trigger = "heartbeat",
- .active_low = 1,
- .gpio = MBIMX51_LED0,
- },
- {
- .name = "led1",
- .default_trigger = "nand-disk",
- .active_low = 1,
- .gpio = MBIMX51_LED1,
- },
- {
- .name = "led2",
- .default_trigger = "mmc0",
- .active_low = 1,
- .gpio = MBIMX51_LED2,
- },
- {
- .name = "led3",
- .default_trigger = "default-on",
- .active_low = 1,
- .gpio = MBIMX51_LED3,
- },
-};
-
-static const struct gpio_led_platform_data mbimx51_leds_info __initconst = {
- .leds = mbimx51_leds,
- .num_leds = ARRAY_SIZE(mbimx51_leds),
-};
-
-static iomux_v3_cfg_t mbimx51_pads[] = {
- /* UART2 */
- MX51_PAD_UART2_RXD__UART2_RXD,
- MX51_PAD_UART2_TXD__UART2_TXD,
-
- /* UART3 */
- MX51_PAD_UART3_RXD__UART3_RXD,
- MX51_PAD_UART3_TXD__UART3_TXD,
- MX51_PAD_KEY_COL4__UART3_RTS,
- MX51_PAD_KEY_COL5__UART3_CTS,
-
- /* TSC2007 IRQ */
- MX51_PAD_NANDF_D10__GPIO3_30,
-
- /* LEDS */
- MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
- MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
- MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
- MX51_PAD_DISPB2_SER_RS__GPIO3_8,
-
- /* KPP */
- MX51_PAD_KEY_ROW0__KEY_ROW0,
- MX51_PAD_KEY_ROW1__KEY_ROW1,
- MX51_PAD_KEY_ROW2__KEY_ROW2,
- MX51_PAD_KEY_ROW3__KEY_ROW3,
- MX51_PAD_KEY_COL0__KEY_COL0,
- MX51_PAD_KEY_COL1__KEY_COL1,
- MX51_PAD_KEY_COL2__KEY_COL2,
- MX51_PAD_KEY_COL3__KEY_COL3,
-
- /* SD 1 */
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
-
- /* SD 2 */
- MX51_PAD_SD2_CMD__SD2_CMD,
- MX51_PAD_SD2_CLK__SD2_CLK,
- MX51_PAD_SD2_DATA0__SD2_DATA0,
- MX51_PAD_SD2_DATA1__SD2_DATA1,
- MX51_PAD_SD2_DATA2__SD2_DATA2,
- MX51_PAD_SD2_DATA3__SD2_DATA3,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int mbimx51_keymap[] = {
- KEY(0, 0, KEY_1),
- KEY(0, 1, KEY_2),
- KEY(0, 2, KEY_3),
- KEY(0, 3, KEY_UP),
-
- KEY(1, 0, KEY_4),
- KEY(1, 1, KEY_5),
- KEY(1, 2, KEY_6),
- KEY(1, 3, KEY_LEFT),
-
- KEY(2, 0, KEY_7),
- KEY(2, 1, KEY_8),
- KEY(2, 2, KEY_9),
- KEY(2, 3, KEY_RIGHT),
-
- KEY(3, 0, KEY_0),
- KEY(3, 1, KEY_DOWN),
- KEY(3, 2, KEY_ESC),
- KEY(3, 3, KEY_ENTER),
-};
-
-static const struct matrix_keymap_data mbimx51_map_data __initconst = {
- .keymap = mbimx51_keymap,
- .keymap_size = ARRAY_SIZE(mbimx51_keymap),
-};
-
-static int tsc2007_get_pendown_state(void)
-{
- return !gpio_get_value(MBIMX51_TSC2007_GPIO);
-}
-
-struct tsc2007_platform_data tsc2007_data = {
- .model = 2007,
- .x_plate_ohms = 180,
- .get_pendown_state = tsc2007_get_pendown_state,
-};
-
-static struct i2c_board_info mbimx51_i2c_devices[] = {
- {
- I2C_BOARD_INFO("tsc2007", 0x49),
- .irq = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
- .platform_data = &tsc2007_data,
- }, {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
-};
-
-/*
- * baseboard initialization.
- */
-void __init eukrea_mbimx51_baseboard_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
- ARRAY_SIZE(mbimx51_pads));
-
- imx51_add_imx_uart(1, NULL);
- imx51_add_imx_uart(2, &uart_pdata);
-
- gpio_request(MBIMX51_LED0, "LED0");
- gpio_direction_output(MBIMX51_LED0, 1);
- gpio_free(MBIMX51_LED0);
- gpio_request(MBIMX51_LED1, "LED1");
- gpio_direction_output(MBIMX51_LED1, 1);
- gpio_free(MBIMX51_LED1);
- gpio_request(MBIMX51_LED2, "LED2");
- gpio_direction_output(MBIMX51_LED2, 1);
- gpio_free(MBIMX51_LED2);
- gpio_request(MBIMX51_LED3, "LED3");
- gpio_direction_output(MBIMX51_LED3, 1);
- gpio_free(MBIMX51_LED3);
-
- gpio_led_register_device(-1, &mbimx51_leds_info);
-
- imx51_add_imx_keypad(&mbimx51_map_data);
-
- gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
- gpio_direction_input(MBIMX51_TSC2007_GPIO);
- irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO),
- IRQF_TRIGGER_FALLING);
- i2c_register_board_info(1, mbimx51_i2c_devices,
- ARRAY_SIZE(mbimx51_i2c_devices));
-
- imx51_add_sdhci_esdhc_imx(0, NULL);
- imx51_add_sdhci_esdhc_imx(1, NULL);
-}
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
deleted file mode 100644
index d817fc80b98..00000000000
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx51.h>
-#include <mach/audmux.h>
-
-#include "devices-imx51.h"
-
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
- /* LED */
- MX51_PAD_NANDF_D10__GPIO3_30,
- /* SWITCH */
- NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
- /* UART2 */
- MX51_PAD_UART2_RXD__UART2_RXD,
- MX51_PAD_UART2_TXD__UART2_TXD,
- /* UART 3 */
- MX51_PAD_UART3_RXD__UART3_RXD,
- MX51_PAD_UART3_TXD__UART3_TXD,
- MX51_PAD_KEY_COL4__UART3_RTS,
- MX51_PAD_KEY_COL5__UART3_CTS,
- /* SD */
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
- /* SD1 CD */
- NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-};
-
-#define GPIO_LED1 IMX_GPIO_NR(3, 30)
-#define GPIO_SWITCH1 IMX_GPIO_NR(3, 31)
-
-static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
- {
- .name = "led1",
- .default_trigger = "heartbeat",
- .active_low = 1,
- .gpio = GPIO_LED1,
- },
-};
-
-static const struct gpio_led_platform_data
- eukrea_mbimxsd_led_info __initconst = {
- .leds = eukrea_mbimxsd_leds,
- .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
- {
- .gpio = GPIO_SWITCH1,
- .code = BTN_0,
- .desc = "BP1",
- .active_low = 1,
- .wakeup = 1,
- },
-};
-
-static const struct gpio_keys_platform_data
- eukrea_mbimxsd_button_data __initconst = {
- .buttons = eukrea_mbimxsd_gpio_buttons,
- .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx51sd init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd51_baseboard_init(void)
-{
- if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
- ARRAY_SIZE(eukrea_mbimxsd_pads)))
- printk(KERN_ERR "error setting mbimxsd pads !\n");
-
- imx51_add_imx_uart(1, NULL);
- imx51_add_imx_uart(2, &uart_pdata);
-
- imx51_add_sdhci_esdhc_imx(0, NULL);
-
- gpio_request(GPIO_LED1, "LED1");
- gpio_direction_output(GPIO_LED1, 1);
- gpio_free(GPIO_LED1);
-
- gpio_request(GPIO_SWITCH1, "SWITCH1");
- gpio_direction_input(GPIO_SWITCH1);
- gpio_free(GPIO_SWITCH1);
-
- i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
- ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
- gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
- imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
-}
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
deleted file mode 100644
index ccc61585659..00000000000
--- a/arch/arm/mach-mx5/imx51-dt.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx51.h>
-
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate(). Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx21-uart.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx21-uart.1", NULL),
- OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx21-uart.2", NULL),
- OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "imx27-fec.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx51.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx51.1", NULL),
- OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx51.2", NULL),
- OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx51.3", NULL),
- OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
- OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
- OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL),
- OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
- { /* sentinel */ }
-};
-
-static void __init imx51_tzic_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- irq_domain_add_simple(np, 0);
-}
-
-static void __init imx51_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
- 32 * 4; /* imx51 gets 4 gpio ports */
-
- irq_domain_add_simple(np, gpio_irq_base);
- gpio_irq_base += 32;
-}
-
-static const struct of_device_id imx51_irq_match[] __initconst = {
- { .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, },
- { .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, },
- { /* sentinel */ }
-};
-
-static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
- { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
- { /* sentinel */ }
-};
-
-static void __init imx51_dt_init(void)
-{
- struct device_node *node;
- const struct of_device_id *of_id;
- void (*func)(void);
-
- of_irq_init(imx51_irq_match);
-
- node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
- if (node) {
- of_id = of_match_node(imx51_iomuxc_of_match, node);
- func = of_id->data;
- func();
- of_node_put(node);
- }
-
- of_platform_populate(NULL, of_default_bus_match_table,
- imx51_auxdata_lookup, NULL);
-}
-
-static void __init imx51_timer_init(void)
-{
- mx51_clocks_init_dt();
-}
-
-static struct sys_timer imx51_timer = {
- .init = imx51_timer_init,
-};
-
-static const char *imx51_dt_board_compat[] __initdata = {
- "fsl,imx51-babbage",
- NULL
-};
-
-DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .timer = &imx51_timer,
- .init_machine = imx51_dt_init,
- .dt_compat = imx51_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
deleted file mode 100644
index ccaa0b81b76..00000000000
--- a/arch/arm/mach-mx5/imx53-dt.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx53.h>
-
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate(). Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
- OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
- OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
- OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
- OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
- OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
- { /* sentinel */ }
-};
-
-static void __init imx53_tzic_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- irq_domain_add_simple(np, 0);
-}
-
-static void __init imx53_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
- 32 * 7; /* imx53 gets 7 gpio ports */
-
- irq_domain_add_simple(np, gpio_irq_base);
- gpio_irq_base += 32;
-}
-
-static const struct of_device_id imx53_irq_match[] __initconst = {
- { .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, },
- { .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, },
- { /* sentinel */ }
-};
-
-static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
- { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
- { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
- { .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
- { .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
- { /* sentinel */ }
-};
-
-static void __init imx53_dt_init(void)
-{
- struct device_node *node;
- const struct of_device_id *of_id;
- void (*func)(void);
-
- of_irq_init(imx53_irq_match);
-
- node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
- if (node) {
- of_id = of_match_node(imx53_iomuxc_of_match, node);
- func = of_id->data;
- func();
- of_node_put(node);
- }
-
- of_platform_populate(NULL, of_default_bus_match_table,
- imx53_auxdata_lookup, NULL);
-}
-
-static void __init imx53_timer_init(void)
-{
- mx53_clocks_init_dt();
-}
-
-static struct sys_timer imx53_timer = {
- .init = imx53_timer_init,
-};
-
-static const char *imx53_dt_board_compat[] __initdata = {
- "fsl,imx53-ard",
- "fsl,imx53-evk",
- "fsl,imx53-qsb",
- "fsl,imx53-smd",
- NULL
-};
-
-DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &imx53_timer,
- .init_machine = imx53_dt_init,
- .dt_compat = imx53_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
deleted file mode 100644
index 26eacc9d0d9..00000000000
--- a/arch/arm/mach-mx5/mm.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/iomux-v3.h>
-
-static void imx5_idle(void)
-{
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-}
-
-/*
- * Define the MX50 memory map.
- */
-static struct map_desc mx50_io_desc[] __initdata = {
- imx_map_entry(MX50, TZIC, MT_DEVICE),
- imx_map_entry(MX50, SPBA0, MT_DEVICE),
- imx_map_entry(MX50, AIPS1, MT_DEVICE),
- imx_map_entry(MX50, AIPS2, MT_DEVICE),
-};
-
-/*
- * Define the MX51 memory map.
- */
-static struct map_desc mx51_io_desc[] __initdata = {
- imx_map_entry(MX51, TZIC, MT_DEVICE),
- imx_map_entry(MX51, IRAM, MT_DEVICE),
- imx_map_entry(MX51, AIPS1, MT_DEVICE),
- imx_map_entry(MX51, SPBA0, MT_DEVICE),
- imx_map_entry(MX51, AIPS2, MT_DEVICE),
-};
-
-/*
- * Define the MX53 memory map.
- */
-static struct map_desc mx53_io_desc[] __initdata = {
- imx_map_entry(MX53, TZIC, MT_DEVICE),
- imx_map_entry(MX53, AIPS1, MT_DEVICE),
- imx_map_entry(MX53, SPBA0, MT_DEVICE),
- imx_map_entry(MX53, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx50_map_io(void)
-{
- iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
-}
-
-void __init mx51_map_io(void)
-{
- iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
-}
-
-void __init mx53_map_io(void)
-{
- iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
-}
-
-void __init imx50_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX50);
- mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
-}
-
-void __init imx51_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX51);
- mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
- imx_idle = imx5_idle;
-}
-
-void __init imx53_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX53);
- mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
-}
-
-void __init mx50_init_irq(void)
-{
- tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-}
-
-void __init mx51_init_irq(void)
-{
- tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
-}
-
-void __init mx53_init_irq(void)
-{
- tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
- .ap_2_ap_addr = 642,
- .uart_2_mcu_addr = 817,
- .mcu_2_app_addr = 747,
- .mcu_2_shp_addr = 961,
- .ata_2_mcu_addr = 1473,
- .mcu_2_ata_addr = 1392,
- .app_2_per_addr = 1033,
- .app_2_mcu_addr = 683,
- .shp_2_per_addr = 1251,
- .shp_2_mcu_addr = 892,
-};
-
-static struct sdma_platform_data imx51_sdma_pdata __initdata = {
- .fw_name = "sdma-imx51.bin",
- .script_addrs = &imx51_sdma_script,
-};
-
-static struct sdma_script_start_addrs imx53_sdma_script __initdata = {
- .ap_2_ap_addr = 642,
- .app_2_mcu_addr = 683,
- .mcu_2_app_addr = 747,
- .uart_2_mcu_addr = 817,
- .shp_2_mcu_addr = 891,
- .mcu_2_shp_addr = 960,
- .uartsh_2_mcu_addr = 1032,
- .spdif_2_mcu_addr = 1100,
- .mcu_2_spdif_addr = 1134,
- .firi_2_mcu_addr = 1193,
- .mcu_2_firi_addr = 1290,
-};
-
-static struct sdma_platform_data imx53_sdma_pdata __initdata = {
- .fw_name = "sdma-imx53.bin",
- .script_addrs = &imx53_sdma_script,
-};
-
-void __init imx50_soc_init(void)
-{
- /* i.mx50 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
- mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
- mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
- mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
- mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
- mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
-}
-
-void __init imx51_soc_init(void)
-{
- /* i.mx51 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
- mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
- mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
- mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
-
- /* i.mx51 has the i.mx35 type sdma */
- imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
-}
-
-void __init imx53_soc_init(void)
-{
- /* i.mx53 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
- mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
- mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
- mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
- mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
- mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
- mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
-
- /* i.mx53 has the i.mx35 type sdma */
- imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
-}
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
deleted file mode 100644
index ec6ca91b299..00000000000
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ /dev/null
@@ -1,632 +0,0 @@
-/*
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-#include "cpu_op-mx51.h"
-
-#define MX51_USB_CTRL_1_OFFSET 0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
-
-#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5)
-#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27)
-
-#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24)
-#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25)
-
-#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
-
-static iomux_v3_cfg_t mx51efika_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* SD 1 */
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
-
- /* SD 2 */
- MX51_PAD_SD2_CMD__SD2_CMD,
- MX51_PAD_SD2_CLK__SD2_CLK,
- MX51_PAD_SD2_DATA0__SD2_DATA0,
- MX51_PAD_SD2_DATA1__SD2_DATA1,
- MX51_PAD_SD2_DATA2__SD2_DATA2,
- MX51_PAD_SD2_DATA3__SD2_DATA3,
-
- /* SD/MMC WP/CD */
- MX51_PAD_GPIO1_0__SD1_CD,
- MX51_PAD_GPIO1_1__SD1_WP,
- MX51_PAD_GPIO1_7__SD2_WP,
- MX51_PAD_GPIO1_8__SD2_CD,
-
- /* spi */
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_SS0__GPIO4_24,
- MX51_PAD_CSPI1_SS1__GPIO4_25,
- MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_GPIO1_6__GPIO1_6,
-
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
- /* USB HUB RESET */
- MX51_PAD_GPIO1_5__GPIO1_5,
-
- /* WLAN */
- MX51_PAD_EIM_A22__GPIO2_16,
- MX51_PAD_EIM_A16__GPIO2_10,
-
- /* USB PHY RESET */
- MX51_PAD_EIM_D27__GPIO2_9,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
- * be different for other Freescale SoCs, thus a common bitmask is not
- * possible and cannot get place in /plat-mxc/ehci.c.
- */
-static int initialize_otg_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
- /* Set the PHY clock to 19.2MHz */
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- v |= MX51_USB_PLL_DIV_19_2_MHZ;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
- .init = initialize_otg_port,
- .portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
- iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
- iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
- u32 v;
- void __iomem *usb_base;
- void __iomem *socregs_base;
-
- mxc_iomux_v3_setup_pad(usbh1gpio);
- gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
- gpio_direction_output(EFIKAMX_USBH1_STP, 0);
- msleep(1);
- gpio_set_value(EFIKAMX_USBH1_STP, 1);
- msleep(1);
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
- /* The clock for the USBH1 ULPI port will come externally */
- /* from the PHY. */
- v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
- __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
- socregs_base + MX51_USB_CTRL_1_OFFSET);
-
- iounmap(usb_base);
-
- gpio_free(EFIKAMX_USBH1_STP);
- mxc_iomux_v3_setup_pad(usbh1stp);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh1_config __initdata = {
- .init = initialize_usbh1_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void mx51_efika_hubreset(void)
-{
- gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
- gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
- msleep(1);
- gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
- msleep(1);
- gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
-}
-
-static void __init mx51_efika_usb(void)
-{
- mx51_efika_hubreset();
-
- /* pulling it low, means no USB at all... */
- gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
- gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
- msleep(1);
- gpio_set_value(EFIKA_USB_PHY_RESET, 1);
-
- usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-
- imx51_add_mxc_ehci_otg(&dr_utmi_config);
- if (usbh1_config.otg)
- imx51_add_mxc_ehci_hs(1, &usbh1_config);
-}
-
-static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_256K,
- },
- {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_64K,
- },
-};
-
-static struct flash_platform_data mx51_efika_spi_flash_data = {
- .name = "spi_flash",
- .parts = mx51_efika_spi_nor_partitions,
- .nr_parts = ARRAY_SIZE(mx51_efika_spi_nor_partitions),
- .type = "sst25vf032b",
-};
-
-static struct regulator_consumer_supply sw1_consumers[] = {
- {
- .supply = "cpu_vcc",
- }
-};
-
-static struct regulator_consumer_supply vdig_consumers[] = {
- /* sgtl5000 */
- REGULATOR_SUPPLY("VDDA", "1-000a"),
- REGULATOR_SUPPLY("VDDD", "1-000a"),
-};
-
-static struct regulator_consumer_supply vvideo_consumers[] = {
- /* sgtl5000 */
- REGULATOR_SUPPLY("VDDIO", "1-000a"),
-};
-
-static struct regulator_consumer_supply vsd_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"),
- REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"),
-};
-
-static struct regulator_consumer_supply pwgt1_consumer[] = {
- {
- .supply = "pwgt1",
- }
-};
-
-static struct regulator_consumer_supply pwgt2_consumer[] = {
- {
- .supply = "pwgt2",
- }
-};
-
-static struct regulator_consumer_supply coincell_consumer[] = {
- {
- .supply = "coincell",
- }
-};
-
-static struct regulator_init_data sw1_init = {
- .constraints = {
- .name = "SW1",
- .min_uV = 600000,
- .max_uV = 1375000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .valid_modes_mask = 0,
- .always_on = 1,
- .boot_on = 1,
- .state_mem = {
- .uV = 850000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
- .consumer_supplies = sw1_consumers,
-};
-
-static struct regulator_init_data sw2_init = {
- .constraints = {
- .name = "SW2",
- .min_uV = 900000,
- .max_uV = 1850000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- .state_mem = {
- .uV = 950000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- }
-};
-
-static struct regulator_init_data sw3_init = {
- .constraints = {
- .name = "SW3",
- .min_uV = 1100000,
- .max_uV = 1850000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data sw4_init = {
- .constraints = {
- .name = "SW4",
- .min_uV = 1100000,
- .max_uV = 1850000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data viohi_init = {
- .constraints = {
- .name = "VIOHI",
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vusb_init = {
- .constraints = {
- .name = "VUSB",
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data swbst_init = {
- .constraints = {
- .name = "SWBST",
- }
-};
-
-static struct regulator_init_data vdig_init = {
- .constraints = {
- .name = "VDIG",
- .min_uV = 1050000,
- .max_uV = 1800000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
- .consumer_supplies = vdig_consumers,
-};
-
-static struct regulator_init_data vpll_init = {
- .constraints = {
- .name = "VPLL",
- .min_uV = 1050000,
- .max_uV = 1800000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vusb2_init = {
- .constraints = {
- .name = "VUSB2",
- .min_uV = 2400000,
- .max_uV = 2775000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vvideo_init = {
- .constraints = {
- .name = "VVIDEO",
- .min_uV = 2775000,
- .max_uV = 2775000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .apply_uV = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
- .consumer_supplies = vvideo_consumers,
-};
-
-static struct regulator_init_data vaudio_init = {
- .constraints = {
- .name = "VAUDIO",
- .min_uV = 2300000,
- .max_uV = 3000000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vsd_init = {
- .constraints = {
- .name = "VSD",
- .min_uV = 1800000,
- .max_uV = 3150000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
- .consumer_supplies = vsd_consumers,
-};
-
-static struct regulator_init_data vcam_init = {
- .constraints = {
- .name = "VCAM",
- .min_uV = 2500000,
- .max_uV = 3000000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vgen1_init = {
- .constraints = {
- .name = "VGEN1",
- .min_uV = 1200000,
- .max_uV = 3150000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vgen2_init = {
- .constraints = {
- .name = "VGEN2",
- .min_uV = 1200000,
- .max_uV = 3150000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vgen3_init = {
- .constraints = {
- .name = "VGEN3",
- .min_uV = 1800000,
- .max_uV = 2900000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data gpo1_init = {
- .constraints = {
- .name = "GPO1",
- }
-};
-
-static struct regulator_init_data gpo2_init = {
- .constraints = {
- .name = "GPO2",
- }
-};
-
-static struct regulator_init_data gpo3_init = {
- .constraints = {
- .name = "GPO3",
- }
-};
-
-static struct regulator_init_data gpo4_init = {
- .constraints = {
- .name = "GPO4",
- }
-};
-
-static struct regulator_init_data pwgt1_init = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
- .consumer_supplies = pwgt1_consumer,
-};
-
-static struct regulator_init_data pwgt2_init = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
- .consumer_supplies = pwgt2_consumer,
-};
-
-static struct regulator_init_data vcoincell_init = {
- .constraints = {
- .name = "COINCELL",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
- .consumer_supplies = coincell_consumer,
-};
-
-static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
- { .id = MC13892_SW1, .init_data = &sw1_init },
- { .id = MC13892_SW2, .init_data = &sw2_init },
- { .id = MC13892_SW3, .init_data = &sw3_init },
- { .id = MC13892_SW4, .init_data = &sw4_init },
- { .id = MC13892_SWBST, .init_data = &swbst_init },
- { .id = MC13892_VIOHI, .init_data = &viohi_init },
- { .id = MC13892_VPLL, .init_data = &vpll_init },
- { .id = MC13892_VDIG, .init_data = &vdig_init },
- { .id = MC13892_VSD, .init_data = &vsd_init },
- { .id = MC13892_VUSB2, .init_data = &vusb2_init },
- { .id = MC13892_VVIDEO, .init_data = &vvideo_init },
- { .id = MC13892_VAUDIO, .init_data = &vaudio_init },
- { .id = MC13892_VCAM, .init_data = &vcam_init },
- { .id = MC13892_VGEN1, .init_data = &vgen1_init },
- { .id = MC13892_VGEN2, .init_data = &vgen2_init },
- { .id = MC13892_VGEN3, .init_data = &vgen3_init },
- { .id = MC13892_VUSB, .init_data = &vusb_init },
- { .id = MC13892_GPO1, .init_data = &gpo1_init },
- { .id = MC13892_GPO2, .init_data = &gpo2_init },
- { .id = MC13892_GPO3, .init_data = &gpo3_init },
- { .id = MC13892_GPO4, .init_data = &gpo4_init },
- { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init },
- { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init },
- { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init },
-};
-
-static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
- .flags = MC13XXX_USE_RTC,
- .regulators = {
- .num_regulators = ARRAY_SIZE(mx51_efika_regulators),
- .regulators = mx51_efika_regulators,
- },
-};
-
-static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = &mx51_efika_spi_flash_data,
- .irq = -1,
- },
- {
- .modalias = "mc13892",
- .max_speed_hz = 1000000,
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = &mx51_efika_mc13892_data,
- .irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
- },
-};
-
-static int mx51_efika_spi_cs[] = {
- EFIKAMX_SPI_CS0,
- EFIKAMX_SPI_CS1,
-};
-
-static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
- .chipselect = mx51_efika_spi_cs,
- .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
-};
-
-void __init efika_board_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
- ARRAY_SIZE(mx51efika_pads));
- imx51_add_imx_uart(0, &uart_pdata);
- mx51_efika_usb();
-
- /* FIXME: comes from original code. check this. */
- if (mx51_revision() < IMX_CHIP_REVISION_2_0)
- sw2_init.constraints.state_mem.uV = 1100000;
- else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
- sw2_init.constraints.state_mem.uV = 1250000;
- sw1_init.constraints.state_mem.uV = 1000000;
- }
- if (machine_is_mx51_efikasb())
- vgen1_init.constraints.max_uV = 1200000;
-
- gpio_request(EFIKAMX_PMIC, "pmic irq");
- gpio_direction_input(EFIKAMX_PMIC);
- spi_register_board_info(mx51_efika_spi_board_info,
- ARRAY_SIZE(mx51_efika_spi_board_info));
- imx51_add_ecspi(0, &mx51_efika_spi_pdata);
-
- imx51_add_pata_imx();
-
-#if defined(CONFIG_CPU_FREQ_IMX)
- get_cpu_op = mx51_get_cpu_op;
-#endif
-}
diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c
deleted file mode 100644
index 98052fc852c..00000000000
--- a/arch/arm/mach-mx5/pm-imx5.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/suspend.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include "crm_regs.h"
-
-static struct clk *gpc_dvfs_clk;
-
-static int mx5_suspend_prepare(void)
-{
- return clk_enable(gpc_dvfs_clk);
-}
-
-static int mx5_suspend_enter(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_MEM:
- mx5_cpu_lp_set(STOP_POWER_OFF);
- break;
- case PM_SUSPEND_STANDBY:
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
- break;
- default:
- return -EINVAL;
- }
-
- if (state == PM_SUSPEND_MEM) {
- local_flush_tlb_all();
- flush_cache_all();
-
- /*clear the EMPGC0/1 bits */
- __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
- __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
- }
- cpu_do_idle();
- return 0;
-}
-
-static void mx5_suspend_finish(void)
-{
- clk_disable(gpc_dvfs_clk);
-}
-
-static int mx5_pm_valid(suspend_state_t state)
-{
- return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
-}
-
-static const struct platform_suspend_ops mx5_suspend_ops = {
- .valid = mx5_pm_valid,
- .prepare = mx5_suspend_prepare,
- .enter = mx5_suspend_enter,
- .finish = mx5_suspend_finish,
-};
-
-static int __init mx5_pm_init(void)
-{
- if (gpc_dvfs_clk == NULL)
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
-
- if (!IS_ERR(gpc_dvfs_clk)) {
- if (cpu_is_mx51())
- suspend_set_ops(&mx5_suspend_ops);
- } else
- return -EPERM;
-
- return 0;
-}
-device_initcall(mx5_pm_init);
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
deleted file mode 100644
index 144ebebc4a6..00000000000
--- a/arch/arm/mach-mx5/system.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include "crm_regs.h"
-
-/* set cpu low power mode before WFI instruction. This function is called
- * mx5 because it can be used for mx50, mx51, and mx53.*/
-void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
-{
- u32 plat_lpc, arm_srpgcr, ccm_clpcr;
- u32 empgc0, empgc1;
- int stop_mode = 0;
-
- /* always allow platform to issue a deep sleep mode request */
- plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
- ~(MXC_CORTEXA8_PLAT_LPC_DSM);
- ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
- arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
- empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
- empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
-
- switch (mode) {
- case WAIT_CLOCKED:
- break;
- case WAIT_UNCLOCKED:
- ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
- break;
- case WAIT_UNCLOCKED_POWER_OFF:
- case STOP_POWER_OFF:
- plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
- | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
- if (mode == WAIT_UNCLOCKED_POWER_OFF) {
- ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
- ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
- ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
- stop_mode = 0;
- } else {
- ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
- ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
- ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
- ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
- stop_mode = 1;
- }
- arm_srpgcr |= MXC_SRPGCR_PCR;
-
- if (tzic_enable_wake(1) != 0)
- return;
- break;
- case STOP_POWER_ON:
- ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
- break;
- default:
- printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
- return;
- }
-
- __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
- __raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
- __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
-
- /* Enable NEON SRPG for all but MX50TO1.0. */
- if (mx50_revision() != IMX_CHIP_REVISION_1_0)
- __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
-
- if (stop_mode) {
- empgc0 |= MXC_SRPGCR_PCR;
- empgc1 |= MXC_SRPGCR_PCR;
-
- __raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
- __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
- }
-}