aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-kirkwood
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-kirkwood')
-rw-r--r--arch/arm/mach-kirkwood/Kconfig122
-rw-r--r--arch/arm/mach-kirkwood/Makefile15
-rw-r--r--arch/arm/mach-kirkwood/Makefile.boot6
-rw-r--r--arch/arm/mach-kirkwood/addr-map.c3
-rw-r--r--arch/arm/mach-kirkwood/board-dnskw.c232
-rw-r--r--arch/arm/mach-kirkwood/board-dockstar.c32
-rw-r--r--arch/arm/mach-kirkwood/board-dreamplug.c112
-rw-r--r--arch/arm/mach-kirkwood/board-dt.c120
-rw-r--r--arch/arm/mach-kirkwood/board-goflexnet.c34
-rw-r--r--arch/arm/mach-kirkwood/board-ib62x0.c113
-rw-r--r--arch/arm/mach-kirkwood/board-iconnect.c130
-rw-r--r--arch/arm/mach-kirkwood/board-iomega_ix2_200.c29
-rw-r--r--arch/arm/mach-kirkwood/board-km_kirkwood.c44
-rw-r--r--arch/arm/mach-kirkwood/board-lsxl.c52
-rw-r--r--arch/arm/mach-kirkwood/board-mplcec4.c44
-rw-r--r--arch/arm/mach-kirkwood/board-ns2.c48
-rw-r--r--arch/arm/mach-kirkwood/board-nsa310.c101
-rw-r--r--arch/arm/mach-kirkwood/board-openblocks_a6.c70
-rw-r--r--arch/arm/mach-kirkwood/board-ts219.c53
-rw-r--r--arch/arm/mach-kirkwood/board-usi_topkick.c77
-rw-r--r--arch/arm/mach-kirkwood/common.c131
-rw-r--r--arch/arm/mach-kirkwood/common.h72
-rw-r--r--arch/arm/mach-kirkwood/cpuidle.c2
-rw-r--r--arch/arm/mach-kirkwood/d2net_v2-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/db88f6281-bp-setup.c3
-rw-r--r--arch/arm/mach-kirkwood/dockstar-setup.c4
-rw-r--r--arch/arm/mach-kirkwood/guruplug-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/include/mach/bridge-regs.h20
-rw-r--r--arch/arm/mach-kirkwood/include/mach/gpio.h9
-rw-r--r--arch/arm/mach-kirkwood/include/mach/io.h24
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kirkwood.h120
-rw-r--r--arch/arm/mach-kirkwood/include/mach/leds-netxbig.h55
-rw-r--r--arch/arm/mach-kirkwood/include/mach/leds-ns2.h26
-rw-r--r--arch/arm/mach-kirkwood/irq.c41
-rw-r--r--arch/arm/mach-kirkwood/lacie_v2-common.c1
-rw-r--r--arch/arm/mach-kirkwood/mpp.c4
-rw-r--r--arch/arm/mach-kirkwood/netspace_v2-setup.c6
-rw-r--r--arch/arm/mach-kirkwood/netxbig_v2-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/openrd-setup.c16
-rw-r--r--arch/arm/mach-kirkwood/pcie.c98
-rw-r--r--arch/arm/mach-kirkwood/rd88f6192-nas-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/rd88f6281-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/sheevaplug-setup.c4
-rw-r--r--arch/arm/mach-kirkwood/t5325-setup.c6
-rw-r--r--arch/arm/mach-kirkwood/ts41x-setup.c6
-rw-r--r--arch/arm/mach-kirkwood/tsx1x-common.c7
46 files changed, 1145 insertions, 956 deletions
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 199764fe0fb..f91cdff5a3e 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -46,6 +46,13 @@ config MACH_GURUPLUG
config ARCH_KIRKWOOD_DT
bool "Marvell Kirkwood Flattened Device Tree"
+ select POWER_SUPPLY
+ select POWER_RESET
+ select POWER_RESET_GPIO
+ select REGULATOR
+ select REGULATOR_FIXED_VOLTAGE
+ select MVEBU_CLK_CORE
+ select MVEBU_CLK_GATING
select USE_OF
help
Say 'Y' here if you want your kernel to support the
@@ -80,6 +87,113 @@ config MACH_IB62X0_DT
RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
Flattened Device Tree.
+config MACH_TS219_DT
+ bool "Device Tree for QNAP TS-11X, TS-21X NAS"
+ select ARCH_KIRKWOOD_DT
+ select ARM_APPENDED_DTB
+ select ARM_ATAG_DTB_COMPAT
+ help
+ Say 'Y' here if you want your kernel to support the QNAP
+ TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
+ TS-219P+ Turbo NAS devices using Fattened Device Tree.
+ There are two different Device Tree descriptions, depending
+ on if the device is based on an if the board uses the MV6281
+ or MV6282. If you have the wrong one, the buttons will not
+ work.
+
+config MACH_DOCKSTAR_DT
+ bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Seagate FreeAgent Dockstar (Flattened Device Tree).
+
+config MACH_GOFLEXNET_DT
+ bool "Seagate GoFlex Net (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Seagate GoFlex Net (Flattened Device Tree).
+
+config MACH_LSXL_DT
+ bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
+ Flattened Device Tree.
+
+config MACH_IOMEGA_IX2_200_DT
+ bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Iomega StorCenter ix2-200 (Flattened Device Tree).
+
+config MACH_KM_KIRKWOOD_DT
+ bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
+
+config MACH_INETSPACE_V2_DT
+ bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ Internet Space v2 NAS, using Flattened Device Tree.
+
+config MACH_MPLCEC4_DT
+ bool "MPL CEC4 (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ MPL CEC4 (Flattened Device Tree).
+
+config MACH_NETSPACE_V2_DT
+ bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ Network Space v2 NAS, using Flattened Device Tree.
+
+config MACH_NETSPACE_MAX_V2_DT
+ bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ Network Space Max v2 NAS, using Flattened Device Tree.
+
+config MACH_NETSPACE_LITE_V2_DT
+ bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ Network Space Lite v2 NAS, using Flattened Device Tree.
+
+config MACH_NETSPACE_MINI_V2_DT
+ bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ Network Space Mini v2 NAS (aka SafeBox), using Flattened
+ Device Tree.
+
+config MACH_OPENBLOCKS_A6_DT
+ bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Plat'Home OpenBlocks A6 (Flattened Device Tree).
+
+config MACH_TOPKICK_DT
+ bool "USI Topkick (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ USI Topkick, using Flattened Device Tree
+
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
@@ -166,6 +280,14 @@ config MACH_T5325
Say 'Y' here if you want your kernel to support the
HP t5325 Thin Client.
+config MACH_NSA310_DT
+ bool "ZyXEL NSA-310 (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ select ARM_ATAG_DTB_COMPAT
+ help
+ Say 'Y' here if you want your kernel to support the
+ ZyXEL NSA-310 board (Flattened Device Tree).
+
endmenu
endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index d2b05907b10..8d2e5a96247 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -25,3 +25,18 @@ obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
+obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
+obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
+obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o
+obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
+obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o
+obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o
+obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o
+obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o
+obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o
+obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o
+obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o
+obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index 02edbdf5b06..760a0efe758 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -1,9 +1,3 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
-dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
-dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index e9a7180863d..8f0d162a1e1 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -86,5 +86,6 @@ void __init kirkwood_setup_cpu_mbus(void)
/*
* Setup MBUS dram target info.
*/
- orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE);
+ orion_setup_cpu_mbus_target(&addr_map_cfg,
+ (void __iomem *) DDR_WINDOW_CPU_BASE);
}
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index 58c2d68f944..a1aa87f0918 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -14,219 +14,14 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio-fan.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data dnskw_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static struct mv_sata_platform_data dnskw_sata_data = {
- .n_ports = 2,
-};
-
-static unsigned int dnskw_mpp_config[] __initdata = {
- MPP13_UART1_TXD, /* Custom ... */
- MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */
- MPP20_SATA1_ACTn, /* LED: White Right HDD */
- MPP21_SATA0_ACTn, /* LED: White Left HDD */
- MPP24_GPIO,
- MPP25_GPIO,
- MPP26_GPIO, /* LED: Power */
- MPP27_GPIO, /* LED: Red Right HDD */
- MPP28_GPIO, /* LED: Red Left HDD */
- MPP29_GPIO, /* LED: Red USB (DNS-325 only) */
- MPP30_GPIO,
- MPP31_GPIO,
- MPP32_GPIO,
- MPP33_GPO,
- MPP34_GPIO, /* Button: Front power */
- MPP35_GPIO, /* LED: Red USB (DNS-320 only) */
- MPP36_GPIO, /* Power: Turn off board */
- MPP37_GPIO, /* Power: Turn back on after power failure */
- MPP38_GPIO,
- MPP39_GPIO, /* Power: SATA0 */
- MPP40_GPIO, /* Power: SATA1 */
- MPP41_GPIO, /* SATA0 present */
- MPP42_GPIO, /* SATA1 present */
- MPP43_GPIO, /* LED: White USB */
- MPP44_GPIO, /* Fan: Tachometer Pin */
- MPP45_GPIO, /* Fan: high speed */
- MPP46_GPIO, /* Fan: low speed */
- MPP47_GPIO, /* Button: Back unmount */
- MPP48_GPIO, /* Button: Back reset */
- MPP49_GPIO, /* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */
- 0
-};
-
-static struct gpio_led dns325_led_pins[] = {
- {
- .name = "dns325:white:power",
- .gpio = 26,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "dns325:white:usb",
- .gpio = 43,
- .active_low = 1,
- },
- {
- .name = "dns325:red:l_hdd",
- .gpio = 28,
- .active_low = 1,
- },
- {
- .name = "dns325:red:r_hdd",
- .gpio = 27,
- .active_low = 1,
- },
- {
- .name = "dns325:red:usb",
- .gpio = 29,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data dns325_led_data = {
- .num_leds = ARRAY_SIZE(dns325_led_pins),
- .leds = dns325_led_pins,
-};
-
-static struct platform_device dns325_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &dns325_led_data,
- },
-};
-
-static struct gpio_led dns320_led_pins[] = {
- {
- .name = "dns320:blue:power",
- .gpio = 26,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "dns320:blue:usb",
- .gpio = 43,
- .active_low = 1,
- },
- {
- .name = "dns320:orange:l_hdd",
- .gpio = 28,
- .active_low = 1,
- },
- {
- .name = "dns320:orange:r_hdd",
- .gpio = 27,
- .active_low = 1,
- },
- {
- .name = "dns320:orange:usb",
- .gpio = 35,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data dns320_led_data = {
- .num_leds = ARRAY_SIZE(dns320_led_pins),
- .leds = dns320_led_pins,
-};
-
-static struct platform_device dns320_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &dns320_led_data,
- },
-};
-
-static struct i2c_board_info dns325_i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("lm75", 0x48),
- },
- /* Something at 0x0c also */
-};
-
-static struct gpio_keys_button dnskw_button_pins[] = {
- {
- .code = KEY_POWER,
- .gpio = 34,
- .desc = "Power button",
- .active_low = 1,
- },
- {
- .code = KEY_EJECTCD,
- .gpio = 47,
- .desc = "USB unmount button",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 48,
- .desc = "Reset button",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data dnskw_button_data = {
- .buttons = dnskw_button_pins,
- .nbuttons = ARRAY_SIZE(dnskw_button_pins),
-};
-
-static struct platform_device dnskw_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &dnskw_button_data,
- }
-};
-
-/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
-static struct gpio_fan_speed dnskw_fan_speed[] = {
- { 0, 0 },
- { 3000, 1 },
- { 6000, 2 },
-};
-static unsigned dnskw_fan_pins[] = {46, 45};
-
-static struct gpio_fan_platform_data dnskw_fan_data = {
- .num_ctrl = ARRAY_SIZE(dnskw_fan_pins),
- .ctrl = dnskw_fan_pins,
- .num_speed = ARRAY_SIZE(dnskw_fan_speed),
- .speed = dnskw_fan_speed,
-};
-
-static struct platform_device dnskw_fan_device = {
- .name = "gpio-fan",
- .id = -1,
- .dev = {
- .platform_data = &dnskw_fan_data,
- },
-};
-
-static void dnskw_power_off(void)
-{
- gpio_set_value(36, 1);
-}
-
/* Register any GPIO for output and set the value */
static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
{
@@ -241,34 +36,7 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
void __init dnskw_init(void)
{
- kirkwood_mpp_conf(dnskw_mpp_config);
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&dnskw_ge00_data);
- kirkwood_sata_init(&dnskw_sata_data);
- kirkwood_i2c_init();
-
- platform_device_register(&dnskw_button_device);
- platform_device_register(&dnskw_fan_device);
-
- if (of_machine_is_compatible("dlink,dns-325")) {
- i2c_register_board_info(0, dns325_i2c_board_info,
- ARRAY_SIZE(dns325_i2c_board_info));
- platform_device_register(&dns325_led_device);
-
- } else if (of_machine_is_compatible("dlink,dns-320"))
- platform_device_register(&dns320_led_device);
-
- /* Register power-off GPIO. */
- if (gpio_request(36, "dnskw:power:off") == 0
- && gpio_direction_output(36, 0) == 0)
- pm_power_off = dnskw_power_off;
- else
- pr_err("dnskw: failed to configure power-off GPIO\n");
-
- /* Ensure power is supplied to both HDDs */
- dnskw_gpio_register(39, "dnskw:power:sata0", 1);
- dnskw_gpio_register(40, "dnskw:power:sata1", 1);
/* Set NAS to turn back on after a power failure */
dnskw_gpio_register(37, "dnskw:power:recover", 1);
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
new file mode 100644
index 00000000000..d7196db3398
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dockstar.c
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-kirkwood/board-dockstar.c
+ *
+ * Seagate FreeAgent Dockstar Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Copied and modified for Seagate GoFlex Net support by
+ * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
+ * GoFlex kernel patches.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init dockstar_dt_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_ge00_init(&dockstar_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 55e357ab292..08248e24ffc 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -13,64 +13,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
-#include "mpp.h"
-
-struct mtd_partition dreamplug_partitions[] = {
- {
- .name = "u-boot",
- .size = SZ_512K,
- .offset = 0,
- },
- {
- .name = "u-boot env",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_512K,
- },
- {
- .name = "dtb",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_512K + SZ_512K,
- },
-};
-
-static const struct flash_platform_data dreamplug_spi_slave_data = {
- .type = "mx25l1606e",
- .name = "spi_flash",
- .parts = dreamplug_partitions,
- .nr_parts = ARRAY_SIZE(dreamplug_partitions),
-};
-
-static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &dreamplug_spi_slave_data,
- .irq = -1,
- .max_speed_hz = 50000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
@@ -80,72 +26,16 @@ static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(1),
};
-static struct mv_sata_platform_data dreamplug_sata_data = {
- .n_ports = 1,
-};
-
static struct mvsdio_platform_data dreamplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
};
-static struct gpio_led dreamplug_led_pins[] = {
- {
- .name = "dreamplug:blue:bluetooth",
- .gpio = 47,
- .active_low = 1,
- },
- {
- .name = "dreamplug:green:wifi",
- .gpio = 48,
- .active_low = 1,
- },
- {
- .name = "dreamplug:green:wifi_ap",
- .gpio = 49,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data dreamplug_led_data = {
- .leds = dreamplug_led_pins,
- .num_leds = ARRAY_SIZE(dreamplug_led_pins),
-};
-
-static struct platform_device dreamplug_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &dreamplug_led_data,
- }
-};
-
-static unsigned int dreamplug_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP47_GPIO, /* Bluetooth LED */
- MPP48_GPIO, /* Wifi LED */
- MPP49_GPIO, /* Wifi AP LED */
- 0
-};
-
void __init dreamplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(dreamplug_mpp_config);
-
- spi_register_board_info(dreamplug_spi_slave_info,
- ARRAY_SIZE(dreamplug_spi_slave_info));
- kirkwood_spi_init();
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&dreamplug_ge00_data);
kirkwood_ge01_init(&dreamplug_ge01_data);
- kirkwood_sata_init(&dreamplug_sata_data);
kirkwood_sdio_init(&dreamplug_mvsdio_data);
-
- platform_device_register(&dreamplug_leds);
}
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index edc3f8a9d45..de4fd2bb1e2 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -14,10 +14,15 @@
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
#include <linux/kexec.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <plat/irq.h>
+#include <plat/common.h>
#include "common.h"
static struct of_device_id kirkwood_dt_match_table[] __initdata = {
@@ -25,6 +30,55 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = {
{ }
};
+/*
+ * There are still devices that doesn't know about DT yet. Get clock
+ * gates here and add a clock lookup alias, so that old platform
+ * devices still work.
+*/
+
+static void __init kirkwood_legacy_clk_init(void)
+{
+
+ struct device_node *np = of_find_compatible_node(
+ NULL, NULL, "marvell,kirkwood-gating-clock");
+
+ struct of_phandle_args clkspec;
+
+ clkspec.np = np;
+ clkspec.args_count = 1;
+
+ clkspec.args[0] = CGC_BIT_GE0;
+ orion_clkdev_add(NULL, "mv643xx_eth_port.0",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CGC_BIT_PEX0;
+ orion_clkdev_add("0", "pcie",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CGC_BIT_USB0;
+ orion_clkdev_add(NULL, "orion-ehci.0",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CGC_BIT_PEX1;
+ orion_clkdev_add("1", "pcie",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CGC_BIT_GE1;
+ orion_clkdev_add(NULL, "mv643xx_eth_port.1",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CGC_BIT_SDIO;
+ orion_clkdev_add(NULL, "mvsdio",
+ of_clk_get_from_provider(&clkspec));
+
+}
+
+static void __init kirkwood_of_clk_init(void)
+{
+ mvebu_clocks_init();
+ kirkwood_legacy_clk_init();
+}
+
static void __init kirkwood_dt_init(void)
{
pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
@@ -39,18 +93,10 @@ static void __init kirkwood_dt_init(void)
kirkwood_setup_cpu_mbus();
-#ifdef CONFIG_CACHE_FEROCEON_L2
kirkwood_l2_init();
-#endif
/* Setup root of clk tree */
- kirkwood_clk_init();
-
- /* internal devices that every board has */
- kirkwood_wdt_init();
- kirkwood_xor0_init();
- kirkwood_xor1_init();
- kirkwood_crypto_init();
+ kirkwood_of_clk_init();
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
@@ -68,15 +114,67 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
ib62x0_init();
+ if (of_machine_is_compatible("qnap,ts219"))
+ qnap_dt_ts219_init();
+
+ if (of_machine_is_compatible("seagate,dockstar"))
+ dockstar_dt_init();
+
+ if (of_machine_is_compatible("seagate,goflexnet"))
+ goflexnet_init();
+
+ if (of_machine_is_compatible("buffalo,lsxl"))
+ lsxl_init();
+
+ if (of_machine_is_compatible("iom,ix2-200"))
+ iomega_ix2_200_init();
+
+ if (of_machine_is_compatible("keymile,km_kirkwood"))
+ km_kirkwood_init();
+
+ if (of_machine_is_compatible("lacie,inetspace_v2") ||
+ of_machine_is_compatible("lacie,netspace_v2") ||
+ of_machine_is_compatible("lacie,netspace_max_v2") ||
+ of_machine_is_compatible("lacie,netspace_lite_v2") ||
+ of_machine_is_compatible("lacie,netspace_mini_v2"))
+ ns2_init();
+
+ if (of_machine_is_compatible("mpl,cec4"))
+ mplcec4_init();
+
+ if (of_machine_is_compatible("plathome,openblocks-a6"))
+ openblocks_a6_init();
+
+ if (of_machine_is_compatible("usi,topkick"))
+ usi_topkick_init();
+
+ if (of_machine_is_compatible("zyxel,nsa310"))
+ nsa310_init();
+
of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
}
-static const char *kirkwood_dt_board_compat[] = {
+static const char * const kirkwood_dt_board_compat[] = {
"globalscale,dreamplug",
"dlink,dns-320",
"dlink,dns-325",
"iom,iconnect",
"raidsonic,ib-nas62x0",
+ "qnap,ts219",
+ "seagate,dockstar",
+ "seagate,goflexnet",
+ "buffalo,lsxl",
+ "iom,ix2-200",
+ "keymile,km_kirkwood",
+ "lacie,inetspace_v2",
+ "lacie,netspace_max_v2",
+ "lacie,netspace_v2",
+ "lacie,netspace_lite_v2",
+ "lacie,netspace_mini_v2",
+ "mpl,cec4",
+ "plathome,openblocks-a6",
+ "usi,topkick",
+ "zyxel,nsa310",
NULL
};
@@ -84,7 +182,7 @@ DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
+ .init_irq = orion_dt_init_irq,
.timer = &kirkwood_timer,
.init_machine = kirkwood_dt_init,
.restart = kirkwood_restart,
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
new file mode 100644
index 00000000000..9db979aec82
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-goflexnet.c
+ *
+ * Seagate GoFlext Net Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Copied and modified for Seagate GoFlex Net support by
+ * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
+ * GoFlex kernel patches.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init goflexnet_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_ge00_init(&goflexnet_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index eddf1df8891..9f6f496380d 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -13,131 +13,18 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
#include "common.h"
-#include "mpp.h"
-
-#define IB62X0_GPIO_POWER_OFF 24
static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static struct mv_sata_platform_data ib62x0_sata_data = {
- .n_ports = 2,
-};
-
-static unsigned int ib62x0_mpp_config[] __initdata = {
- MPP0_NF_IO2,
- MPP1_NF_IO3,
- MPP2_NF_IO4,
- MPP3_NF_IO5,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP22_GPIO, /* OS LED red */
- MPP24_GPIO, /* Power off device */
- MPP25_GPIO, /* OS LED green */
- MPP27_GPIO, /* USB transfer LED */
- MPP28_GPIO, /* Reset button */
- MPP29_GPIO, /* USB Copy button */
- 0
-};
-
-static struct gpio_led ib62x0_led_pins[] = {
- {
- .name = "ib62x0:green:os",
- .default_trigger = "default-on",
- .gpio = 25,
- .active_low = 0,
- },
- {
- .name = "ib62x0:red:os",
- .default_trigger = "none",
- .gpio = 22,
- .active_low = 0,
- },
- {
- .name = "ib62x0:red:usb_copy",
- .default_trigger = "none",
- .gpio = 27,
- .active_low = 0,
- },
-};
-
-static struct gpio_led_platform_data ib62x0_led_data = {
- .leds = ib62x0_led_pins,
- .num_leds = ARRAY_SIZE(ib62x0_led_pins),
-};
-
-static struct platform_device ib62x0_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &ib62x0_led_data,
- }
-};
-
-static struct gpio_keys_button ib62x0_button_pins[] = {
- {
- .code = KEY_COPY,
- .gpio = 29,
- .desc = "USB Copy",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 28,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data ib62x0_button_data = {
- .buttons = ib62x0_button_pins,
- .nbuttons = ARRAY_SIZE(ib62x0_button_pins),
-};
-
-static struct platform_device ib62x0_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ib62x0_button_data,
- }
-};
-
-static void ib62x0_power_off(void)
-{
- gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
-}
-
void __init ib62x0_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(ib62x0_mpp_config);
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&ib62x0_ge00_data);
- kirkwood_sata_init(&ib62x0_sata_data);
- platform_device_register(&ib62x0_led_device);
- platform_device_register(&ib62x0_button_device);
- if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
- gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = ib62x0_power_off;
- else
- pr_err("board-ib62x0: failed to configure power-off GPIO\n");
}
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index b0d3cc49269..c8ebde4919e 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -10,147 +10,17 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/mtd/partitions.h>
#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data iconnect_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
-static struct gpio_led iconnect_led_pins[] = {
- {
- .name = "led_level",
- .gpio = 41,
- .default_trigger = "default-on",
- }, {
- .name = "power:blue",
- .gpio = 42,
- .default_trigger = "timer",
- }, {
- .name = "power:red",
- .gpio = 43,
- }, {
- .name = "usb1:blue",
- .gpio = 44,
- }, {
- .name = "usb2:blue",
- .gpio = 45,
- }, {
- .name = "usb3:blue",
- .gpio = 46,
- }, {
- .name = "usb4:blue",
- .gpio = 47,
- }, {
- .name = "otb:blue",
- .gpio = 48,
- },
-};
-
-static struct gpio_led_platform_data iconnect_led_data = {
- .leds = iconnect_led_pins,
- .num_leds = ARRAY_SIZE(iconnect_led_pins),
- .gpio_blink_set = orion_gpio_led_blink_set,
-};
-
-static struct platform_device iconnect_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &iconnect_led_data,
- }
-};
-
-static unsigned int iconnect_mpp_config[] __initdata = {
- MPP12_GPIO,
- MPP35_GPIO,
- MPP41_GPIO,
- MPP42_GPIO,
- MPP43_GPIO,
- MPP44_GPIO,
- MPP45_GPIO,
- MPP46_GPIO,
- MPP47_GPIO,
- MPP48_GPIO,
- 0
-};
-
-static struct i2c_board_info __initdata iconnect_board_info[] = {
- {
- I2C_BOARD_INFO("lm63", 0x4c),
- },
-};
-
-static struct mtd_partition iconnect_nand_parts[] = {
- {
- .name = "flash",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-/* yikes... theses are the original input buttons */
-/* but I'm not convinced by the sw event choices */
-static struct gpio_keys_button iconnect_buttons[] = {
- {
- .type = EV_SW,
- .code = SW_LID,
- .gpio = 12,
- .desc = "Reset Button",
- .active_low = 1,
- .debounce_interval = 100,
- }, {
- .type = EV_SW,
- .code = SW_TABLET_MODE,
- .gpio = 35,
- .desc = "OTB Button",
- .active_low = 1,
- .debounce_interval = 100,
- },
-};
-
-static struct gpio_keys_platform_data iconnect_button_data = {
- .buttons = iconnect_buttons,
- .nbuttons = ARRAY_SIZE(iconnect_buttons),
-};
-
-static struct platform_device iconnect_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &iconnect_button_data,
- },
-};
-
void __init iconnect_init(void)
{
- kirkwood_mpp_conf(iconnect_mpp_config);
- kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
- kirkwood_i2c_init();
- i2c_register_board_info(0, iconnect_board_info,
- ARRAY_SIZE(iconnect_board_info));
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&iconnect_ge00_data);
-
- platform_device_register(&iconnect_button_device);
- platform_device_register(&iconnect_leds);
}
static int __init iconnect_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
new file mode 100644
index 00000000000..f655b2637b0
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+ *
+ * Iomega StorCenter ix2-200
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_NONE,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+};
+
+void __init iomega_ix2_200_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
new file mode 100644
index 00000000000..44e4605ba0b
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * arch/arm/mach-kirkwood/board-km_kirkwood.c
+ *
+ * Keymile km_kirkwood Reference Desing Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init km_kirkwood_init(void)
+{
+ struct clk *sata_clk;
+ /*
+ * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
+ * SATA bits (14-15) of the Clock Gating Control Register. Since these
+ * devices are also not present in this variant, their clocks get
+ * disabled because unused when clk_disable_unused() gets called.
+ * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
+ */
+ sata_clk = clk_get_sys("sata_mv.0", "0");
+ if (!IS_ERR(sata_clk))
+ sata_clk->flags |= CLK_IGNORE_UNUSED;
+ sata_clk = clk_get_sys("sata_mv.0", "1");
+ if (!IS_ERR(sata_clk))
+ sata_clk->flags |= CLK_IGNORE_UNUSED;
+
+ kirkwood_ge00_init(&km_kirkwood_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
new file mode 100644
index 00000000000..4ec8b7ae784
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2012 (C), Michael Walle <michael@walle.cc>
+ *
+ * arch/arm/mach-kirkwood/board-lsxl.c
+ *
+ * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not
+ * converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data lsxl_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data lsxl_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*
+ * On the LS-XHL/LS-CHLv2, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ * to move the switch to ON position
+ *
+ */
+static void lsxl_power_off(void)
+{
+ kirkwood_restart('h', NULL);
+}
+
+void __init lsxl_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+
+ kirkwood_ge00_init(&lsxl_ge00_data);
+ kirkwood_ge01_init(&lsxl_ge01_data);
+
+ /* register power-off method */
+ pm_power_off = lsxl_power_off;
+}
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
new file mode 100644
index 00000000000..56bfe5a1605
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2012 MPL AG, Switzerland
+ * Stefan Peter <s.peter@mpl.ch>
+ *
+ * arch/arm/mach-kirkwood/board-mplcec4.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(2),
+};
+
+static struct mvsdio_platform_data mplcec4_mvsdio_data = {
+ .gpio_card_detect = 47, /* MPP47 used as SD card detect */
+};
+
+
+void __init mplcec4_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_ge00_init(&mplcec4_ge00_data);
+ kirkwood_ge01_init(&mplcec4_ge01_data);
+ kirkwood_sdio_init(&mplcec4_mvsdio_data);
+ kirkwood_pcie_init(KW_PCIE0);
+}
+
+
+
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
new file mode 100644
index 00000000000..f4632a809f6
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * arch/arm/mach-kirkwood/board-ns2.c
+ *
+ * LaCie Network Space v2 board (and parents) initialization for drivers
+ * not converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data ns2_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+#define NS2_GPIO_POWER_OFF 31
+
+static void ns2_power_off(void)
+{
+ gpio_set_value(NS2_GPIO_POWER_OFF, 1);
+}
+
+void __init ns2_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
+ of_machine_is_compatible("lacie,netspace_mini_v2"))
+ ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+ kirkwood_ge00_init(&ns2_ge00_data);
+
+ if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 &&
+ gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = ns2_power_off;
+ else
+ pr_err("ns2: failed to configure power-off GPIO\n");
+}
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
new file mode 100644
index 00000000000..f58d2e1a404
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-nsa310.c
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-kirkwood/nsa-310-setup.c
+ *
+ * ZyXEL NSA-310 Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define NSA310_GPIO_USB_POWER_OFF 21
+#define NSA310_GPIO_POWER_OFF 48
+
+static unsigned int nsa310_mpp_config[] __initdata = {
+ MPP12_GPIO, /* led esata green */
+ MPP13_GPIO, /* led esata red */
+ MPP15_GPIO, /* led usb green */
+ MPP16_GPIO, /* led usb red */
+ MPP21_GPIO, /* control usb power off */
+ MPP28_GPIO, /* led sys green */
+ MPP29_GPIO, /* led sys red */
+ MPP36_GPIO, /* key reset */
+ MPP37_GPIO, /* key copy */
+ MPP39_GPIO, /* led copy green */
+ MPP40_GPIO, /* led copy red */
+ MPP41_GPIO, /* led hdd green */
+ MPP42_GPIO, /* led hdd red */
+ MPP44_GPIO, /* ?? */
+ MPP46_GPIO, /* key power */
+ MPP48_GPIO, /* control power off */
+ 0
+};
+
+static struct i2c_board_info __initdata nsa310_i2c_info[] = {
+ { I2C_BOARD_INFO("adt7476", 0x2e) },
+};
+
+static void nsa310_power_off(void)
+{
+ gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
+}
+
+static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
+ const char *label)
+{
+ int err;
+
+ err = gpio_request_one(gpio, flags, label);
+ if (err)
+ pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
+ gpio, label, err);
+
+ return err;
+}
+
+static void __init nsa310_gpio_init(void)
+{
+ int err;
+
+ err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
+ "Power Off");
+ if (!err)
+ pm_power_off = nsa310_power_off;
+
+ nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW,
+ "USB Power Off");
+}
+
+void __init nsa310_init(void)
+{
+ u32 dev, rev;
+
+ kirkwood_mpp_conf(nsa310_mpp_config);
+
+ nsa310_gpio_init();
+
+ kirkwood_pcie_id(&dev, &rev);
+
+ i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
+}
+
+static int __init nsa310_pci_init(void)
+{
+ if (of_machine_is_compatible("zyxel,nsa310"))
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+
+subsys_initcall(nsa310_pci_init);
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
new file mode 100644
index 00000000000..815fc6451d5
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * arch/arm/mach-kirkwood/board-openblocks_a6.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data openblocks_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int openblocks_a6_mpp_config[] __initdata = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP8_UART1_RTS,
+ MPP9_UART1_CTS,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP13_UART1_TXD,
+ MPP14_UART1_RXD,
+ MPP15_UART0_RTS,
+ MPP16_UART0_CTS,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GPIO, /* DIP SW0 */
+ MPP21_GPIO, /* DIP SW1 */
+ MPP22_GPIO, /* DIP SW2 */
+ MPP23_GPIO, /* DIP SW3 */
+ MPP24_GPIO, /* GPIO 0 */
+ MPP25_GPIO, /* GPIO 1 */
+ MPP26_GPIO, /* GPIO 2 */
+ MPP27_GPIO, /* GPIO 3 */
+ MPP28_GPIO, /* GPIO 4 */
+ MPP29_GPIO, /* GPIO 5 */
+ MPP30_GPIO, /* GPIO 6 */
+ MPP31_GPIO, /* GPIO 7 */
+ MPP36_TW1_SDA,
+ MPP37_TW1_SCK,
+ MPP38_GPIO, /* INIT */
+ MPP39_GPIO, /* USB OC */
+ MPP41_GPIO, /* LED: Red */
+ MPP42_GPIO, /* LED: Green */
+ MPP43_GPIO, /* LED: Yellow */
+ 0,
+};
+
+void __init openblocks_a6_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(openblocks_a6_mpp_config);
+ kirkwood_ge00_init(&openblocks_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
new file mode 100644
index 00000000000..acb0187c7ee
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -0,0 +1,53 @@
+/*
+ *
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT
+ *
+ * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on the board file ts219-setup.c:
+ *
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "tsx1x-common.h"
+
+static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+void __init qnap_dt_ts219_init(void)
+{
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (dev == MV88F6282_DEV_ID)
+ qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+
+ kirkwood_ge00_init(&qnap_ts219_ge00_data);
+
+ pm_power_off = qnap_tsx1x_power_off;
+}
+
+/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */
+static int __init ts219_pci_init(void)
+{
+ if (machine_is_ts219())
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(ts219_pci_init);
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
new file mode 100644
index 00000000000..23d2dd1b1b1
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-usi_topkick.c
+ *
+ * USI Topkick Init for drivers not converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data topkick_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mvsdio_platform_data topkick_mvsdio_data = {
+ /* unfortunately the CD signal has not been connected */
+};
+
+/*
+ * GPIO LED layout
+ *
+ * /-SYS_LED(2)
+ * |
+ * | /-DISK_LED
+ * | |
+ * | | /-WLAN_LED(2)
+ * | | |
+ * [SW] [*] [*] [*]
+ */
+
+/*
+ * Switch positions
+ *
+ * /-SW_LEFT
+ * |
+ * | /-SW_IDLE
+ * | |
+ * | | /-SW_RIGHT
+ * | | |
+ * PS [L] [I] [R] LEDS
+ */
+
+static unsigned int topkick_mpp_config[] __initdata = {
+ MPP21_GPIO, /* DISK_LED (low active) - yellow */
+ MPP36_GPIO, /* SATA0 power enable (high active) */
+ MPP37_GPIO, /* SYS_LED2 (low active) - red */
+ MPP38_GPIO, /* SYS_LED (low active) - blue */
+ MPP39_GPIO, /* WLAN_LED (low active) - green */
+ MPP43_GPIO, /* SW_LEFT (low active) */
+ MPP44_GPIO, /* SW_RIGHT (low active) */
+ MPP45_GPIO, /* SW_IDLE (low active) */
+ MPP46_GPIO, /* SW_LEFT (low active) */
+ MPP48_GPIO, /* WLAN_LED2 (low active) - yellow */
+ 0
+};
+
+void __init usi_topkick_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(topkick_mpp_config);
+
+
+ kirkwood_ge00_init(&topkick_ge00_data);
+ kirkwood_sdio_init(&topkick_mvsdio_data);
+}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index f261cd24264..bac21a554c9 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -17,23 +17,24 @@
#include <linux/dma-mapping.h>
#include <linux/clk-provider.h>
#include <linux/spinlock.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/timex.h>
+#include <linux/kexec.h>
#include <net/dsa.h>
#include <asm/page.h>
-#include <asm/timex.h>
-#include <asm/kexec.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
#include <plat/cache-feroceon-l2.h>
-#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/common.h>
#include <plat/time.h>
#include <plat/addr-map.h>
-#include <plat/mv_xor.h>
+#include <linux/platform_data/dma-mv_xor.h>
#include "common.h"
/*****************************************************************************
@@ -41,17 +42,7 @@
****************************************************************************/
static struct map_desc kirkwood_io_desc[] __initdata = {
{
- .virtual = KIRKWOOD_PCIE_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
- .length = KIRKWOOD_PCIE_IO_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = KIRKWOOD_PCIE1_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
- .length = KIRKWOOD_PCIE1_IO_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = KIRKWOOD_REGS_VIRT_BASE,
+ .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
.length = KIRKWOOD_REGS_SIZE,
.type = MT_DEVICE,
@@ -67,6 +58,14 @@ void __init kirkwood_map_io(void)
* CLK tree
****************************************************************************/
+static void enable_sata0(void)
+{
+ /* Enable PLL and IVREF */
+ writel(readl(SATA0_PHY_MODE_2) | 0xf, SATA0_PHY_MODE_2);
+ /* Enable PHY */
+ writel(readl(SATA0_IF_CTRL) & ~0x200, SATA0_IF_CTRL);
+}
+
static void disable_sata0(void)
{
/* Disable PLL and IVREF */
@@ -75,6 +74,14 @@ static void disable_sata0(void)
writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
}
+static void enable_sata1(void)
+{
+ /* Enable PLL and IVREF */
+ writel(readl(SATA1_PHY_MODE_2) | 0xf, SATA1_PHY_MODE_2);
+ /* Enable PHY */
+ writel(readl(SATA1_IF_CTRL) & ~0x200, SATA1_IF_CTRL);
+}
+
static void disable_sata1(void)
{
/* Disable PLL and IVREF */
@@ -107,23 +114,38 @@ static void disable_pcie1(void)
}
}
-/* An extended version of the gated clk. This calls fn() before
- * disabling the clock. We use this to turn off PHYs etc. */
+/* An extended version of the gated clk. This calls fn_en()/fn_dis
+ * before enabling/disabling the clock. We use this to turn on/off
+ * PHYs etc. */
struct clk_gate_fn {
struct clk_gate gate;
- void (*fn)(void);
+ void (*fn_en)(void);
+ void (*fn_dis)(void);
};
#define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate)
#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+static int clk_gate_fn_enable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = to_clk_gate(hw);
+ struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
+ int ret;
+
+ ret = clk_gate_ops.enable(hw);
+ if (!ret && gate_fn->fn_en)
+ gate_fn->fn_en();
+
+ return ret;
+}
+
static void clk_gate_fn_disable(struct clk_hw *hw)
{
struct clk_gate *gate = to_clk_gate(hw);
struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
- if (gate_fn->fn)
- gate_fn->fn();
+ if (gate_fn->fn_dis)
+ gate_fn->fn_dis();
clk_gate_ops.disable(hw);
}
@@ -135,7 +157,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
u8 clk_gate_flags, spinlock_t *lock,
- void (*fn)(void))
+ void (*fn_en)(void), void (*fn_dis)(void))
{
struct clk_gate_fn *gate_fn;
struct clk *clk;
@@ -159,11 +181,14 @@ static struct clk __init *clk_register_gate_fn(struct device *dev,
gate_fn->gate.flags = clk_gate_flags;
gate_fn->gate.lock = lock;
gate_fn->gate.hw.init = &init;
- gate_fn->fn = fn;
+ gate_fn->fn_en = fn_en;
+ gate_fn->fn_dis = fn_dis;
- /* ops is the gate ops, but with our disable function */
- if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
+ /* ops is the gate ops, but with our enable/disable functions */
+ if (clk_gate_fn_ops.enable != clk_gate_fn_enable ||
+ clk_gate_fn_ops.disable != clk_gate_fn_disable) {
clk_gate_fn_ops = clk_gate_ops;
+ clk_gate_fn_ops.enable = clk_gate_fn_enable;
clk_gate_fn_ops.disable = clk_gate_fn_disable;
}
@@ -180,18 +205,17 @@ static struct clk *tclk;
static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
{
- return clk_register_gate(NULL, name, "tclk", 0,
- (void __iomem *)CLOCK_GATING_CTRL,
+ return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
bit_idx, 0, &gating_lock);
}
static struct clk __init *kirkwood_register_gate_fn(const char *name,
u8 bit_idx,
- void (*fn)(void))
+ void (*fn_en)(void),
+ void (*fn_dis)(void))
{
- return clk_register_gate_fn(NULL, name, "tclk", 0,
- (void __iomem *)CLOCK_GATING_CTRL,
- bit_idx, 0, &gating_lock, fn);
+ return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
+ bit_idx, 0, &gating_lock, fn_en, fn_dis);
}
static struct clk *ge0, *ge1;
@@ -208,18 +232,18 @@ void __init kirkwood_clk_init(void)
ge0 = kirkwood_register_gate("ge0", CGC_BIT_GE0);
ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1);
sata0 = kirkwood_register_gate_fn("sata0", CGC_BIT_SATA0,
- disable_sata0);
+ enable_sata0, disable_sata0);
sata1 = kirkwood_register_gate_fn("sata1", CGC_BIT_SATA1,
- disable_sata1);
+ enable_sata1, disable_sata1);
usb0 = kirkwood_register_gate("usb0", CGC_BIT_USB0);
sdio = kirkwood_register_gate("sdio", CGC_BIT_SDIO);
crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
xor0 = kirkwood_register_gate("xor0", CGC_BIT_XOR0);
xor1 = kirkwood_register_gate("xor1", CGC_BIT_XOR1);
pex0 = kirkwood_register_gate_fn("pex0", CGC_BIT_PEX0,
- disable_pcie0);
+ NULL, disable_pcie0);
pex1 = kirkwood_register_gate_fn("pex1", CGC_BIT_PEX1,
- disable_pcie1);
+ NULL, disable_pcie1);
audio = kirkwood_register_gate("audio", CGC_BIT_AUDIO);
kirkwood_register_gate("tdm", CGC_BIT_TDM);
kirkwood_register_gate("tsu", CGC_BIT_TSU);
@@ -236,11 +260,18 @@ void __init kirkwood_clk_init(void)
orion_clkdev_add(NULL, "orion_nand", runit);
orion_clkdev_add(NULL, "mvsdio", sdio);
orion_clkdev_add(NULL, "mv_crypto", crypto);
- orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".0", xor0);
- orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".1", xor1);
+ orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0);
+ orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1);
orion_clkdev_add("0", "pcie", pex0);
orion_clkdev_add("1", "pcie", pex1);
orion_clkdev_add(NULL, "kirkwood-i2s", audio);
+ orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit);
+ orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit);
+
+ /* Marvell says runit is used by SPI, UART, NAND, TWSI, ...,
+ * so should never be gated.
+ */
+ clk_prepare_enable(runit);
}
/*****************************************************************************
@@ -259,7 +290,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
- IRQ_KIRKWOOD_GE00_ERR);
+ IRQ_KIRKWOOD_GE00_ERR, 1600);
/* The interface forgets the MAC address assigned by u-boot if
the clock is turned off, so claim the clk now. */
clk_prepare_enable(ge0);
@@ -273,7 +304,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
- IRQ_KIRKWOOD_GE01_ERR);
+ IRQ_KIRKWOOD_GE01_ERR, 1600);
clk_prepare_enable(ge1);
}
@@ -395,7 +426,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
/*****************************************************************************
* SPI
****************************************************************************/
-void __init kirkwood_spi_init()
+void __init kirkwood_spi_init(void)
{
orion_spi_init(SPI_PHYS_BASE);
}
@@ -475,6 +506,13 @@ void __init kirkwood_wdt_init(void)
void __init kirkwood_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
+
+ /*
+ * Some Kirkwood devices allocate their coherent buffers from atomic
+ * context. Increase size of atomic coherent pool to make sure such
+ * the allocations won't fail.
+ */
+ init_dma_coherent_pool_size(SZ_1M);
}
int kirkwood_tclk;
@@ -596,6 +634,7 @@ char * __init kirkwood_id(void)
void __init kirkwood_l2_init(void)
{
+#ifdef CONFIG_CACHE_FEROCEON_L2
#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
feroceon_l2_init(1);
@@ -603,12 +642,12 @@ void __init kirkwood_l2_init(void)
writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
feroceon_l2_init(0);
#endif
+#endif
}
void __init kirkwood_init(void)
{
- printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
- kirkwood_id(), kirkwood_tclk);
+ pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
/*
* Disable propagation of mbus errors to the CPU local bus,
@@ -620,9 +659,7 @@ void __init kirkwood_init(void)
kirkwood_setup_cpu_mbus();
-#ifdef CONFIG_CACHE_FEROCEON_L2
kirkwood_l2_init();
-#endif
/* Setup root of clk tree */
kirkwood_clk_init();
@@ -634,7 +671,7 @@ void __init kirkwood_init(void)
kirkwood_xor1_init();
kirkwood_crypto_init();
-#ifdef CONFIG_KEXEC
+#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
#endif
}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 9248fa2c165..5ffa57f08c8 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -47,7 +47,8 @@ void kirkwood_i2c_init(void);
void kirkwood_uart0_init(void);
void kirkwood_uart1_init(void);
void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
-void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
+void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
+ int (*dev_ready)(struct mtd_info *));
void kirkwood_audio_init(void);
void kirkwood_restart(char, const char *);
void kirkwood_clk_init(void);
@@ -58,6 +59,11 @@ void dreamplug_init(void);
#else
static inline void dreamplug_init(void) {};
#endif
+#ifdef CONFIG_MACH_TS219_DT
+void qnap_dt_ts219_init(void);
+#else
+static inline void qnap_dt_ts219_init(void) {};
+#endif
#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
void dnskw_init(void);
@@ -77,6 +83,70 @@ void ib62x0_init(void);
static inline void ib62x0_init(void) {};
#endif
+#ifdef CONFIG_MACH_DOCKSTAR_DT
+void dockstar_dt_init(void);
+#else
+static inline void dockstar_dt_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_GOFLEXNET_DT
+void goflexnet_init(void);
+#else
+static inline void goflexnet_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_LSXL_DT
+void lsxl_init(void);
+#else
+static inline void lsxl_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
+void iomega_ix2_200_init(void);
+#else
+static inline void iomega_ix2_200_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
+void km_kirkwood_init(void);
+#else
+static inline void km_kirkwood_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_MPLCEC4_DT
+void mplcec4_init(void);
+#else
+static inline void mplcec4_init(void) {};
+#endif
+
+#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
+ defined(CONFIG_MACH_NETSPACE_V2_DT) || \
+ defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
+ defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \
+ defined(CONFIG_MACH_NETSPACE_MINI_V2_DT)
+void ns2_init(void);
+#else
+static inline void ns2_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_NSA310_DT
+void nsa310_init(void);
+#else
+static inline void nsa310_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT
+void openblocks_a6_init(void);
+#else
+static inline void openblocks_a6_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_TOPKICK_DT
+void usi_topkick_init(void);
+#else
+static inline void usi_topkick_init(void) {};
+#endif
+
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
index 0f171094187..f7304670f2f 100644
--- a/arch/arm/mach-kirkwood/cpuidle.c
+++ b/arch/arm/mach-kirkwood/cpuidle.c
@@ -64,7 +64,7 @@ static int kirkwood_init_cpuidle(void)
cpuidle_register_driver(&kirkwood_idle_driver);
if (cpuidle_register_device(device)) {
- printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
+ pr_err("kirkwood_init_cpuidle: Failed registering\n");
return -EIO;
}
return 0;
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 6e1bac929ab..2c1a453df20 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -32,7 +32,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index d9335937959..c49b177c152 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/sizes.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
@@ -17,7 +18,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index 61d9a552a05..791a98fafa2 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -19,7 +19,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
@@ -93,7 +93,7 @@ static void __init dockstar_init(void)
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
- printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ pr_err("can't set up GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&dockstar_ge00_data);
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index bdaed3867d1..7cb55f98224 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -19,7 +19,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index a115142f869..5c82b7dce4e 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -13,37 +13,37 @@
#include <mach/kirkwood.h>
-#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
#define CPU_CONFIG_ERROR_PROP 0x00000004
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
#define CPU_RESET 0x00000002
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
#define WDT_RESET_OUT_EN 0x00000002
#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110)
#define WDT_INT_REQ 0x0008
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
#define IRQ_CAUSE_LOW_OFF 0x0000
#define IRQ_MASK_LOW_OFF 0x0004
#define IRQ_CAUSE_HIGH_OFF 0x0010
#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
-#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128)
#define L2_WRITETHROUGH 0x00000010
-#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c)
+#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c)
#define CGC_BIT_GE0 (0)
#define CGC_BIT_PEX0 (2)
#define CGC_BIT_USB0 (3)
diff --git a/arch/arm/mach-kirkwood/include/mach/gpio.h b/arch/arm/mach-kirkwood/include/mach/gpio.h
deleted file mode 100644
index 84f340b546c..00000000000
--- a/arch/arm/mach-kirkwood/include/mach/gpio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
deleted file mode 100644
index 5d0ab61700d..00000000000
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "kirkwood.h"
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE)
- + KIRKWOOD_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a) __io(a)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index c5b68510776..041653a04a9 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -37,17 +37,15 @@
#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
-#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000
-#define KIRKWOOD_PCIE1_IO_SIZE SZ_1M
+#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000
+#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfee00000
#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE SZ_1M
+#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE 0xfed00000
+#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
#define KIRKWOOD_REGS_SIZE SZ_1M
#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
@@ -61,61 +59,61 @@
/*
* Register Map
*/
-#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500)
-#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418)
-
-#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030)
-#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034)
-#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100)
-#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0140)
-#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300)
-#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600)
-#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
-
-#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000)
-
-#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
-
-#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70)
-#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04)
-#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x44000)
-#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE | 0x70)
-#define PCIE1_STATUS (PCIE1_VIRT_BASE | 0x1a04)
-
-#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
-
-#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60800)
-#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60800)
-#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60900)
-#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60900)
-#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
-#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
-#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
-#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
-
-#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
-
-#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000)
-#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050)
-#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330)
-#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050)
-#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330)
-
-#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
-
-#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0xA0000)
-#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0xA0000)
+#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500)
+#define DDR_OPERATION_BASE (DDR_VIRT_BASE + 0x1418)
+
+#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
+#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030)
+#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034)
+#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
+#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140)
+#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300)
+#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600)
+#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
+
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+
+#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
+
+#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000)
+#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70)
+#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04)
+#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000)
+#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70)
+#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04)
+
+#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000)
+
+#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800)
+#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800)
+#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900)
+#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900)
+#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
+#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
+#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
+#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
+
+#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000)
+
+#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000)
+#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000)
+#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050)
+#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330)
+#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050)
+#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330)
+
+#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000)
+
+#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
+#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
/*
* Supported devices and revisions.
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
deleted file mode 100644
index 24b536ebdf1..00000000000
--- a/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
- *
- * Platform data structure for netxbig LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_LEDS_NETXBIG_H
-#define __MACH_LEDS_NETXBIG_H
-
-struct netxbig_gpio_ext {
- unsigned *addr;
- int num_addr;
- unsigned *data;
- int num_data;
- unsigned enable;
-};
-
-enum netxbig_led_mode {
- NETXBIG_LED_OFF,
- NETXBIG_LED_ON,
- NETXBIG_LED_SATA,
- NETXBIG_LED_TIMER1,
- NETXBIG_LED_TIMER2,
- NETXBIG_LED_MODE_NUM,
-};
-
-#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
-
-struct netxbig_led_timer {
- unsigned long delay_on;
- unsigned long delay_off;
- enum netxbig_led_mode mode;
-};
-
-struct netxbig_led {
- const char *name;
- const char *default_trigger;
- int mode_addr;
- int *mode_val;
- int bright_addr;
-};
-
-struct netxbig_led_platform_data {
- struct netxbig_gpio_ext *gpio_ext;
- struct netxbig_led_timer *timer;
- int num_timer;
- struct netxbig_led *leds;
- int num_leds;
-};
-
-#endif /* __MACH_LEDS_NETXBIG_H */
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-ns2.h b/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
deleted file mode 100644
index e21272e5f66..00000000000
--- a/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/leds-ns2.h
- *
- * Platform data structure for Network Space v2 LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_LEDS_NS2_H
-#define __MACH_LEDS_NS2_H
-
-struct ns2_led {
- const char *name;
- const char *default_trigger;
- unsigned cmd;
- unsigned slow;
-};
-
-struct ns2_led_platform_data {
- int num_leds;
- struct ns2_led *leds;
-};
-
-#endif /* __MACH_LEDS_NS2_H */
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index c4c68e5b94f..2a97a2e4163 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -9,40 +9,37 @@
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include <plat/irq.h>
#include "common.h"
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- BUG_ON(irq < IRQ_KIRKWOOD_GPIO_LOW_0_7);
- BUG_ON(irq > IRQ_KIRKWOOD_GPIO_HIGH_16_23);
+static int __initdata gpio0_irqs[4] = {
+ IRQ_KIRKWOOD_GPIO_LOW_0_7,
+ IRQ_KIRKWOOD_GPIO_LOW_8_15,
+ IRQ_KIRKWOOD_GPIO_LOW_16_23,
+ IRQ_KIRKWOOD_GPIO_LOW_24_31,
+};
- orion_gpio_irq_handler((irq - IRQ_KIRKWOOD_GPIO_LOW_0_7) << 3);
-}
+static int __initdata gpio1_irqs[4] = {
+ IRQ_KIRKWOOD_GPIO_HIGH_0_7,
+ IRQ_KIRKWOOD_GPIO_HIGH_8_15,
+ IRQ_KIRKWOOD_GPIO_HIGH_16_23,
+ 0,
+};
void __init kirkwood_init_irq(void)
{
- orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
- orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+ orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+ orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
/*
* Initialize gpiolib for GPIOs 0-49.
*/
- orion_gpio_init(0, 32, GPIO_LOW_VIRT_BASE, 0,
- IRQ_KIRKWOOD_GPIO_START);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler);
-
- orion_gpio_init(32, 18, GPIO_HIGH_VIRT_BASE, 0,
- IRQ_KIRKWOOD_GPIO_START + 32);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23,
- gpio_irq_handler);
+ orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
+ IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
+ orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
+ IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
}
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
index 285edab776e..489495976fc 100644
--- a/arch/arm/mach-kirkwood/lacie_v2-common.c
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c
@@ -19,6 +19,7 @@
#include <mach/irqs.h>
#include <plat/time.h>
#include "common.h"
+#include "lacie_v2-common.h"
/*****************************************************************************
* 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 0c6ad63f10c..827cde42414 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -30,8 +30,8 @@ static unsigned int __init kirkwood_variant(void)
if (dev == MV88F6180_DEV_ID)
return MPP_F6180_MASK;
- printk(KERN_ERR "MPP setup: unknown kirkwood variant "
- "(dev %#x rev %#x)\n", dev, rev);
+ pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n",
+ dev, rev);
return 0;
}
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index e6bba01bae3..728e86d33f0 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -34,7 +34,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
@@ -79,7 +79,7 @@ static struct platform_device netspace_v2_gpio_buttons = {
.name = "gpio-keys",
.id = -1,
.dev = {
- .platform_data = &netspace_v2_button_data,
+ .platform_data = &netspace_v2_button_data,
},
};
@@ -211,7 +211,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = {
MPP29_GPIO, /* Blue led (slow register) */
MPP30_GPIO, /* Blue led (command register) */
MPP31_GPIO, /* Board power off */
- MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
+ MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
MPP33_GPO, /* Fan speed (bit 2) */
0
};
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 31ae8de34e9..a3b091470b8 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -32,7 +32,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <mach/leds-netxbig.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 7e99c3f340f..7e81e9b586b 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -20,7 +20,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
@@ -121,14 +121,12 @@ static int __init uart1_mpp_config(void)
kirkwood_mpp_conf(openrd_uart1_mpp_config);
if (gpio_request(34, "SD_UART1_SEL")) {
- printk(KERN_ERR "GPIO request failed for SD/UART1 selection"
- ", gpio: 34\n");
+ pr_err("GPIO request 34 failed for SD/UART1 selection\n");
return -EIO;
}
if (gpio_request(28, "RS232_RS485_SEL")) {
- printk(KERN_ERR "GPIO request failed for RS232/RS485 selection"
- ", gpio# 28\n");
+ pr_err("GPIO request 28 failed for RS232/RS485 selection\n");
gpio_free(34);
return -EIO;
}
@@ -185,15 +183,13 @@ static void __init openrd_init(void)
if (uart1 <= 0) {
if (uart1 < 0)
- printk(KERN_ERR "Invalid kernel parameter to select "
- "UART1. Defaulting to SD. ERROR CODE: %d\n",
- uart1);
+ pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n",
+ uart1);
/* Select SD
* Pin # 34: 0 => UART1, 1 => SD */
if (gpio_request(34, "SD_UART1_SEL")) {
- printk(KERN_ERR "GPIO request failed for SD/UART1 "
- "selection, gpio: 34\n");
+ pr_err("GPIO request 34 failed for SD/UART1 selection\n");
} else {
gpio_direction_output(34, 1);
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 6e8b2efa3c3..a1c3ab6fc80 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -26,7 +26,7 @@ static void kirkwood_enable_pcie_clk(const char *port)
clk = clk_get_sys("pcie", port);
if (IS_ERR(clk)) {
- printk(KERN_ERR "PCIE clock %s missing\n", port);
+ pr_err("PCIE clock %s missing\n", port);
return;
}
clk_prepare_enable(clk);
@@ -47,8 +47,8 @@ void kirkwood_enable_pcie(void)
void kirkwood_pcie_id(u32 *dev, u32 *rev)
{
kirkwood_enable_pcie();
- *dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
- *rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
+ *dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
+ *rev = orion_pcie_rev(PCIE_VIRT_BASE);
}
struct pcie_port {
@@ -56,7 +56,7 @@ struct pcie_port {
void __iomem *base;
spinlock_t conf_lock;
int irq;
- struct resource res[2];
+ struct resource res;
};
static int pcie_port_map[2];
@@ -133,46 +133,30 @@ static struct pci_ops pcie_ops = {
static void __init pcie0_ioresources_init(struct pcie_port *pp)
{
- pp->base = (void __iomem *)PCIE_VIRT_BASE;
+ pp->base = PCIE_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE;
/*
- * IORESOURCE_IO
- */
- pp->res[0].name = "PCIe 0 I/O Space";
- pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
- pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
- pp->res[0].flags = IORESOURCE_IO;
-
- /*
* IORESOURCE_MEM
*/
- pp->res[1].name = "PCIe 0 MEM";
- pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
- pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
- pp->res[1].flags = IORESOURCE_MEM;
+ pp->res.name = "PCIe 0 MEM";
+ pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+ pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+ pp->res.flags = IORESOURCE_MEM;
}
static void __init pcie1_ioresources_init(struct pcie_port *pp)
{
- pp->base = (void __iomem *)PCIE1_VIRT_BASE;
+ pp->base = PCIE1_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE1;
/*
- * IORESOURCE_IO
- */
- pp->res[0].name = "PCIe 1 I/O Space";
- pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
- pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
- pp->res[0].flags = IORESOURCE_IO;
-
- /*
* IORESOURCE_MEM
*/
- pp->res[1].name = "PCIe 1 MEM";
- pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
- pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
- pp->res[1].flags = IORESOURCE_MEM;
+ pp->res.name = "PCIe 1 MEM";
+ pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
+ pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
+ pp->res.flags = IORESOURCE_MEM;
}
static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
@@ -184,7 +168,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
return 0;
index = pcie_port_map[nr];
- printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
+ pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
pp = kzalloc(sizeof(*pp), GFP_KERNEL);
if (!pp)
@@ -197,23 +181,22 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
case 0:
kirkwood_enable_pcie_clk("0");
pcie0_ioresources_init(pp);
+ pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
break;
case 1:
kirkwood_enable_pcie_clk("1");
pcie1_ioresources_init(pp);
+ pci_ioremap_io(SZ_64K * sys->busnr,
+ KIRKWOOD_PCIE1_IO_PHYS_BASE);
break;
default:
panic("PCIe setup: invalid controller %d", index);
}
- if (request_resource(&ioport_resource, &pp->res[0]))
- panic("Request PCIe%d IO resource failed\n", index);
- if (request_resource(&iomem_resource, &pp->res[1]))
+ if (request_resource(&iomem_resource, &pp->res))
panic("Request PCIe%d Memory resource failed\n", index);
- sys->io_offset = 0;
- pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
- pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
/*
* Generic PCIe unit setup.
@@ -225,14 +208,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
return 1;
}
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
+static void rc_pci_fixup(struct pci_dev *dev)
{
- /*
- * Prevent enumeration of root complex.
- */
if (dev->bus->parent == NULL && dev->devfn == 0) {
int i;
+ dev->class &= 0xff;
+ dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
@@ -242,22 +230,6 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-static struct pci_bus __init *
-kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
- struct pci_bus *bus;
-
- if (nr < num_pcie_ports) {
- bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
- &sys->resources);
- } else {
- bus = NULL;
- BUG();
- }
-
- return bus;
-}
-
static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
u8 pin)
{
@@ -269,19 +241,19 @@ static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
static struct hw_pci kirkwood_pci __initdata = {
.setup = kirkwood_pcie_setup,
- .scan = kirkwood_pcie_scan_bus,
.map_irq = kirkwood_pcie_map_irq,
+ .ops = &pcie_ops,
};
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
{
- printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
+ pr_info("Kirkwood PCIe port %d: ", index);
- if (orion_pcie_link_up((void __iomem *)base)) {
- printk(KERN_INFO "link up\n");
+ if (orion_pcie_link_up(base)) {
+ pr_info("link up\n");
pcie_port_map[num_pcie_ports++] = index;
} else
- printk(KERN_INFO "link down, ignoring\n");
+ pr_info("link down, ignoring\n");
}
void __init kirkwood_pcie_init(unsigned int portmask)
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index f742a66a704..19072c84008 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -19,6 +19,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#define RD88F6192_GPIO_USB_VBUS 10
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index ef922079348..9717101a743 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -20,7 +20,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 4ea70e5f713..8a175948b28 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -19,7 +19,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
@@ -117,7 +117,7 @@ static void __init sheevaplug_init(void)
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
- printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ pr_err("can't set up GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&sheevaplug_ge00_data);
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index bad738e4404..f2daf711e72 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -29,7 +29,7 @@
#include "common.h"
#include "mpp.h"
-struct mtd_partition hp_t5325_partitions[] = {
+static struct mtd_partition hp_t5325_partitions[] = {
{
.name = "u-boot env",
.size = SZ_64K,
@@ -59,14 +59,14 @@ struct mtd_partition hp_t5325_partitions[] = {
},
};
-const struct flash_platform_data hp_t5325_flash = {
+static const struct flash_platform_data hp_t5325_flash = {
.type = "mx25l8005",
.name = "spi_flash",
.parts = hp_t5325_partitions,
.nr_parts = ARRAY_SIZE(hp_t5325_partitions),
};
-struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
+static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &hp_t5325_flash,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 5bbca268044..e4c61279ea8 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -20,6 +20,7 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
@@ -161,7 +162,7 @@ static int __init ts41x_pci_init(void)
* (Marvell 88sx7042/sata_mv) is known to stop working
* after a few minutes.
*/
- orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+ orion_pcie_reset(PCIE_VIRT_BASE);
kirkwood_pcie_id(&dev, &rev);
if (dev == MV88F6282_DEV_ID)
@@ -169,8 +170,7 @@ static int __init ts41x_pci_init(void)
else
kirkwood_pcie_init(KW_PCIE0);
}
-
- return 0;
+ return 0;
}
subsys_initcall(ts41x_pci_init);
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index 8943ede29b4..cec87cef76c 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -7,6 +7,7 @@
#include <linux/serial_reg.h>
#include <mach/kirkwood.h>
#include "common.h"
+#include "tsx1x-common.h"
/*
* QNAP TS-x1x Boards flash
@@ -29,7 +30,7 @@
*
***************************************************************************/
-struct mtd_partition qnap_tsx1x_partitions[] = {
+static struct mtd_partition qnap_tsx1x_partitions[] = {
{
.name = "U-Boot",
.size = 0x00080000,
@@ -58,14 +59,14 @@ struct mtd_partition qnap_tsx1x_partitions[] = {
},
};
-const struct flash_platform_data qnap_tsx1x_flash = {
+static const struct flash_platform_data qnap_tsx1x_flash = {
.type = "m25p128",
.name = "spi_flash",
.parts = qnap_tsx1x_partitions,
.nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions),
};
-struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &qnap_tsx1x_flash,