aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-integrator
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-integrator')
-rw-r--r--arch/arm/mach-integrator/Kconfig2
-rw-r--r--arch/arm/mach-integrator/Makefile3
-rw-r--r--arch/arm/mach-integrator/common.h9
-rw-r--r--arch/arm/mach-integrator/core.c207
-rw-r--r--arch/arm/mach-integrator/cpu.c8
-rw-r--r--arch/arm/mach-integrator/impd1.c76
-rw-r--r--arch/arm/mach-integrator/include/mach/clkdev.h26
-rw-r--r--arch/arm/mach-integrator/include/mach/cm.h2
-rw-r--r--arch/arm/mach-integrator/include/mach/io.h33
-rw-r--r--arch/arm/mach-integrator/include/mach/irqs.h109
-rw-r--r--arch/arm/mach-integrator/include/mach/platform.h5
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c444
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c495
-rw-r--r--arch/arm/mach-integrator/leds.c161
-rw-r--r--arch/arm/mach-integrator/pci_v3.c94
15 files changed, 985 insertions, 689 deletions
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 350e26636a0..abeff25532a 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -8,6 +8,7 @@ config ARCH_INTEGRATOR_AP
select MIGHT_HAVE_PCI
select SERIAL_AMBA_PL010
select SERIAL_AMBA_PL010_CONSOLE
+ select SOC_BUS
help
Include support for the ARM(R) Integrator/AP and
Integrator/PP2 platforms.
@@ -19,6 +20,7 @@ config ARCH_INTEGRATOR_CP
select PLAT_VERSATILE_CLCD
select SERIAL_AMBA_PL011
select SERIAL_AMBA_PL011_CONSOLE
+ select SOC_BUS
help
Include support for the ARM(R) Integrator CP platform.
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index ebeef966e1f..5521d18bf19 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,11 +4,10 @@
# Object file lists.
-obj-y := core.o lm.o
+obj-y := core.o lm.o leds.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o
obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o
-obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_PCI) += pci_v3.o pci.o
obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
index 899561d8db2..79197d8b34a 100644
--- a/arch/arm/mach-integrator/common.h
+++ b/arch/arm/mach-integrator/common.h
@@ -1,3 +1,12 @@
+#include <linux/amba/serial.h>
+#ifdef CONFIG_ARCH_INTEGRATOR_AP
+extern struct amba_pl010_data ap_uart_data;
+#else
+/* Not used without Integrator/AP support anyway */
+struct amba_pl010_data ap_uart_data {};
+#endif
void integrator_init_early(void);
+int integrator_init(bool is_cp);
void integrator_reserve(void);
void integrator_restart(char, const char *);
+void integrator_init_sysfs(struct device *parent, u32 id);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index eaf6c6366ff..39c060f75e4 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -11,29 +11,30 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/memblock.h>
#include <linux/sched.h>
#include <linux/smp.h>
-#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <linux/io.h>
-#include <linux/clkdev.h>
+#include <linux/stat.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <mach/cm.h>
#include <mach/irqs.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
-static struct amba_pl010_data integrator_uart_data;
+#include "common.h"
+
+#ifdef CONFIG_ATAGS
#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT }
#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 }
@@ -41,17 +42,17 @@ static struct amba_pl010_data integrator_uart_data;
#define KMI0_IRQ { IRQ_KMIINT0 }
#define KMI1_IRQ { IRQ_KMIINT1 }
-static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+static AMBA_APB_DEVICE(rtc, "rtc", 0,
INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
-static AMBA_APB_DEVICE(uart0, "mb:16", 0,
- INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
+static AMBA_APB_DEVICE(uart0, "uart0", 0,
+ INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL);
-static AMBA_APB_DEVICE(uart1, "mb:17", 0,
- INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
+static AMBA_APB_DEVICE(uart1, "uart1", 0,
+ INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL);
-static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
-static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL);
static struct amba_device *amba_devs[] __initdata = {
&rtc_device,
@@ -61,51 +62,7 @@ static struct amba_device *amba_devs[] __initdata = {
&kmi1_device,
};
-/*
- * These are fixed clocks.
- */
-static struct clk clk24mhz = {
- .rate = 24000000,
-};
-
-static struct clk uartclk = {
- .rate = 14745600,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
- { /* Bus clock */
- .con_id = "apb_pclk",
- .clk = &dummy_apb_pclk,
- }, {
- /* Integrator/AP timer frequency */
- .dev_id = "ap_timer",
- .clk = &clk24mhz,
- }, { /* UART0 */
- .dev_id = "mb:16",
- .clk = &uartclk,
- }, { /* UART1 */
- .dev_id = "mb:17",
- .clk = &uartclk,
- }, { /* KMI0 */
- .dev_id = "mb:18",
- .clk = &clk24mhz,
- }, { /* KMI1 */
- .dev_id = "mb:19",
- .clk = &clk24mhz,
- }, { /* MMCI - IntegratorCP */
- .dev_id = "mb:1c",
- .clk = &uartclk,
- }
-};
-
-void __init integrator_init_early(void)
-{
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
-static int __init integrator_init(void)
+int __init integrator_init(bool is_cp)
{
int i;
@@ -114,12 +71,14 @@ static int __init integrator_init(void)
* hard-code them. The Integator/CP and forward have proper cell IDs.
* Else we leave them undefined to the bus driver can autoprobe them.
*/
- if (machine_is_integrator()) {
+ if (!is_cp) {
rtc_device.periphid = 0x00041030;
uart0_device.periphid = 0x00041010;
uart1_device.periphid = 0x00041010;
kmi0_device.periphid = 0x00041050;
kmi1_device.periphid = 0x00041050;
+ uart0_device.dev.platform_data = &ap_uart_data;
+ uart1_device.dev.platform_data = &ap_uart_data;
}
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
@@ -130,49 +89,7 @@ static int __init integrator_init(void)
return 0;
}
-arch_initcall(integrator_init);
-
-/*
- * On the Integrator platform, the port RTS and DTR are provided by
- * bits in the following SC_CTRLS register bits:
- * RTS DTR
- * UART0 7 6
- * UART1 5 4
- */
-#define SC_CTRLC IO_ADDRESS(INTEGRATOR_SC_CTRLC)
-#define SC_CTRLS IO_ADDRESS(INTEGRATOR_SC_CTRLS)
-
-static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
-{
- unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
-
- if (dev == &uart0_device) {
- rts_mask = 1 << 4;
- dtr_mask = 1 << 5;
- } else {
- rts_mask = 1 << 6;
- dtr_mask = 1 << 7;
- }
-
- if (mctrl & TIOCM_RTS)
- ctrlc |= rts_mask;
- else
- ctrls |= rts_mask;
-
- if (mctrl & TIOCM_DTR)
- ctrlc |= dtr_mask;
- else
- ctrls |= dtr_mask;
-
- __raw_writel(ctrls, SC_CTRLS);
- __raw_writel(ctrlc, SC_CTRLC);
-}
-
-static struct amba_pl010_data integrator_uart_data = {
- .set_mctrl = integrator_uart_set_mctrl,
-};
-
-#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
+#endif
static DEFINE_RAW_SPINLOCK(cm_lock);
@@ -211,3 +128,93 @@ void integrator_restart(char mode, const char *cmd)
{
cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
}
+
+static u32 integrator_id;
+
+static ssize_t intcp_get_manf(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%02x\n", integrator_id >> 24);
+}
+
+static struct device_attribute intcp_manf_attr =
+ __ATTR(manufacturer, S_IRUGO, intcp_get_manf, NULL);
+
+static ssize_t intcp_get_arch(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ const char *arch;
+
+ switch ((integrator_id >> 16) & 0xff) {
+ case 0x00:
+ arch = "ASB little-endian";
+ break;
+ case 0x01:
+ arch = "AHB little-endian";
+ break;
+ case 0x03:
+ arch = "AHB-Lite system bus, bi-endian";
+ break;
+ case 0x04:
+ arch = "AHB";
+ break;
+ default:
+ arch = "Unknown";
+ break;
+ }
+
+ return sprintf(buf, "%s\n", arch);
+}
+
+static struct device_attribute intcp_arch_attr =
+ __ATTR(architecture, S_IRUGO, intcp_get_arch, NULL);
+
+static ssize_t intcp_get_fpga(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ const char *fpga;
+
+ switch ((integrator_id >> 12) & 0xf) {
+ case 0x01:
+ fpga = "XC4062";
+ break;
+ case 0x02:
+ fpga = "XC4085";
+ break;
+ case 0x04:
+ fpga = "EPM7256AE (Altera PLD)";
+ break;
+ default:
+ fpga = "Unknown";
+ break;
+ }
+
+ return sprintf(buf, "%s\n", fpga);
+}
+
+static struct device_attribute intcp_fpga_attr =
+ __ATTR(fpga, S_IRUGO, intcp_get_fpga, NULL);
+
+static ssize_t intcp_get_build(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%02x\n", (integrator_id >> 4) & 0xFF);
+}
+
+static struct device_attribute intcp_build_attr =
+ __ATTR(build, S_IRUGO, intcp_get_build, NULL);
+
+
+
+void integrator_init_sysfs(struct device *parent, u32 id)
+{
+ integrator_id = id;
+ device_create_file(parent, &intcp_manf_attr);
+ device_create_file(parent, &intcp_arch_attr);
+ device_create_file(parent, &intcp_fpga_attr);
+ device_create_file(parent, &intcp_build_attr);
+}
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index fbb45777989..590c192cdf4 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -25,10 +25,10 @@
static struct cpufreq_driver integrator_driver;
-#define CM_ID IO_ADDRESS(INTEGRATOR_HDR_ID)
-#define CM_OSC IO_ADDRESS(INTEGRATOR_HDR_OSC)
-#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT)
-#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK)
+#define CM_ID __io_address(INTEGRATOR_HDR_ID)
+#define CM_OSC __io_address(INTEGRATOR_HDR_OSC)
+#define CM_STAT __io_address(INTEGRATOR_HDR_STAT)
+#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK)
static const struct icst_params lclk_params = {
.ref = 24000000,
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index e428f3ab15c..9f82f9dcbb9 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -21,10 +21,9 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-integrator.h>
#include <linux/slab.h>
-#include <linux/clkdev.h>
-#include <asm/hardware/icst.h>
#include <mach/lm.h>
#include <mach/impd1.h>
#include <asm/sizes.h>
@@ -36,45 +35,6 @@ MODULE_PARM_DESC(lmid, "logic module stack position");
struct impd1_module {
void __iomem *base;
- struct clk vcos[2];
- struct clk_lookup *clks[3];
-};
-
-static const struct icst_params impd1_vco_params = {
- .ref = 24000000, /* 24 MHz */
- .vco_max = ICST525_VCO_MAX_3V,
- .vco_min = ICST525_VCO_MIN,
- .vd_min = 12,
- .vd_max = 519,
- .rd_min = 3,
- .rd_max = 120,
- .s2div = icst525_s2div,
- .idx2s = icst525_idx2s,
-};
-
-static void impd1_setvco(struct clk *clk, struct icst_vco vco)
-{
- struct impd1_module *impd1 = clk->data;
- u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
-
- writel(0xa05f, impd1->base + IMPD1_LOCK);
- writel(val, clk->vcoreg);
- writel(0, impd1->base + IMPD1_LOCK);
-
-#ifdef DEBUG
- vco.v = val & 0x1ff;
- vco.r = (val >> 9) & 0x7f;
- vco.s = (val >> 16) & 7;
-
- pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
- vconr, icst525_hz(&impd1_vco_params, vco));
-#endif
-}
-
-static const struct clk_ops impd1_clk_ops = {
- .round = icst_clk_round,
- .set = icst_clk_set,
- .setvco = impd1_setvco,
};
void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
@@ -344,10 +304,6 @@ static struct impd1_device impd1_devs[] = {
}
};
-static struct clk fixed_14745600 = {
- .rate = 14745600,
-};
-
static int impd1_probe(struct lm_device *dev)
{
struct impd1_module *impd1;
@@ -376,23 +332,7 @@ static int impd1_probe(struct lm_device *dev)
printk("IM-PD1 found at 0x%08lx\n",
(unsigned long)dev->resource.start);
- for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
- impd1->vcos[i].ops = &impd1_clk_ops,
- impd1->vcos[i].owner = THIS_MODULE,
- impd1->vcos[i].params = &impd1_vco_params,
- impd1->vcos[i].data = impd1;
- }
- impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
- impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
-
- impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
- dev->id);
- impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
- dev->id);
- impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
- dev->id);
- for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
- clkdev_add(impd1->clks[i]);
+ integrator_impd1_clk_init(impd1->base, dev->id);
for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
struct impd1_device *idev = impd1_devs + i;
@@ -402,9 +342,10 @@ static int impd1_probe(struct lm_device *dev)
pc_base = dev->resource.start + idev->offset;
snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
- d = amba_ahb_device_add(&dev->dev, devname, pc_base, SZ_4K,
- dev->irq, dev->irq,
- idev->platform_data, idev->id);
+ d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K,
+ dev->irq, dev->irq,
+ idev->platform_data, idev->id,
+ &dev->resource);
if (IS_ERR(d)) {
dev_err(&dev->dev, "unable to register device: %ld\n", PTR_ERR(d));
continue;
@@ -431,12 +372,9 @@ static int impd1_remove_one(struct device *dev, void *data)
static void impd1_remove(struct lm_device *dev)
{
struct impd1_module *impd1 = lm_get_drvdata(dev);
- int i;
device_for_each_child(&dev->dev, NULL, impd1_remove_one);
-
- for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
- clkdev_drop(impd1->clks[i]);
+ integrator_impd1_clk_exit(dev->id);
lm_set_drvdata(dev, NULL);
diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h
deleted file mode 100644
index bfe07679fae..00000000000
--- a/arch/arm/mach-integrator/include/mach/clkdev.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <linux/module.h>
-#include <plat/clock.h>
-
-struct clk {
- unsigned long rate;
- const struct clk_ops *ops;
- struct module *owner;
- const struct icst_params *params;
- void __iomem *vcoreg;
- void *data;
-};
-
-static inline int __clk_get(struct clk *clk)
-{
- return try_module_get(clk->owner);
-}
-
-static inline void __clk_put(struct clk *clk)
-{
- module_put(clk->owner);
-}
-
-#endif
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
index 445d57adb04..202e6a57f10 100644
--- a/arch/arm/mach-integrator/include/mach/cm.h
+++ b/arch/arm/mach-integrator/include/mach/cm.h
@@ -3,6 +3,8 @@
*/
void cm_control(u32, u32);
+#define CM_CTRL __io_address(INTEGRATOR_HDR_CTRL)
+
#define CM_CTRL_LED (1 << 0)
#define CM_CTRL_nMBDET (1 << 1)
#define CM_CTRL_REMAP (1 << 2)
diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h
deleted file mode 100644
index 8de70de3dd0..00000000000
--- a/arch/arm/mach-integrator/include/mach/io.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/io.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/*
- * WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR 0xe8000000
-#define PCI_CONFIG_VADDR 0xec000000
-#define PCI_V3_VADDR 0xed000000
-#define PCI_IO_VADDR 0xee000000
-
-#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a)))
-
-#endif
diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h
index 7371018455d..eff0adad9ae 100644
--- a/arch/arm/mach-integrator/include/mach/irqs.h
+++ b/arch/arm/mach-integrator/include/mach/irqs.h
@@ -19,64 +19,63 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-/*
- * Interrupt numbers
+/*
+ * Interrupt numbers, all of the above are just static reservations
+ * used so they can be encoded into device resources. They will finally
+ * be done away with when switching to device tree.
*/
-#define IRQ_PIC_START 1
-#define IRQ_SOFTINT 1
-#define IRQ_UARTINT0 2
-#define IRQ_UARTINT1 3
-#define IRQ_KMIINT0 4
-#define IRQ_KMIINT1 5
-#define IRQ_TIMERINT0 6
-#define IRQ_TIMERINT1 7
-#define IRQ_TIMERINT2 8
-#define IRQ_RTCINT 9
-#define IRQ_AP_EXPINT0 10
-#define IRQ_AP_EXPINT1 11
-#define IRQ_AP_EXPINT2 12
-#define IRQ_AP_EXPINT3 13
-#define IRQ_AP_PCIINT0 14
-#define IRQ_AP_PCIINT1 15
-#define IRQ_AP_PCIINT2 16
-#define IRQ_AP_PCIINT3 17
-#define IRQ_AP_V3INT 18
-#define IRQ_AP_CPINT0 19
-#define IRQ_AP_CPINT1 20
-#define IRQ_AP_LBUSTIMEOUT 21
-#define IRQ_AP_APCINT 22
-#define IRQ_CP_CLCDCINT 23
-#define IRQ_CP_MMCIINT0 24
-#define IRQ_CP_MMCIINT1 25
-#define IRQ_CP_AACIINT 26
-#define IRQ_CP_CPPLDINT 27
-#define IRQ_CP_ETHINT 28
-#define IRQ_CP_TSPENINT 29
-#define IRQ_PIC_END 29
+#define IRQ_PIC_START 64
+#define IRQ_SOFTINT (IRQ_PIC_START+0)
+#define IRQ_UARTINT0 (IRQ_PIC_START+1)
+#define IRQ_UARTINT1 (IRQ_PIC_START+2)
+#define IRQ_KMIINT0 (IRQ_PIC_START+3)
+#define IRQ_KMIINT1 (IRQ_PIC_START+4)
+#define IRQ_TIMERINT0 (IRQ_PIC_START+5)
+#define IRQ_TIMERINT1 (IRQ_PIC_START+6)
+#define IRQ_TIMERINT2 (IRQ_PIC_START+7)
+#define IRQ_RTCINT (IRQ_PIC_START+8)
+#define IRQ_AP_EXPINT0 (IRQ_PIC_START+9)
+#define IRQ_AP_EXPINT1 (IRQ_PIC_START+10)
+#define IRQ_AP_EXPINT2 (IRQ_PIC_START+11)
+#define IRQ_AP_EXPINT3 (IRQ_PIC_START+12)
+#define IRQ_AP_PCIINT0 (IRQ_PIC_START+13)
+#define IRQ_AP_PCIINT1 (IRQ_PIC_START+14)
+#define IRQ_AP_PCIINT2 (IRQ_PIC_START+15)
+#define IRQ_AP_PCIINT3 (IRQ_PIC_START+16)
+#define IRQ_AP_V3INT (IRQ_PIC_START+17)
+#define IRQ_AP_CPINT0 (IRQ_PIC_START+18)
+#define IRQ_AP_CPINT1 (IRQ_PIC_START+19)
+#define IRQ_AP_LBUSTIMEOUT (IRQ_PIC_START+20)
+#define IRQ_AP_APCINT (IRQ_PIC_START+21)
+#define IRQ_CP_CLCDCINT (IRQ_PIC_START+22)
+#define IRQ_CP_MMCIINT0 (IRQ_PIC_START+23)
+#define IRQ_CP_MMCIINT1 (IRQ_PIC_START+24)
+#define IRQ_CP_AACIINT (IRQ_PIC_START+25)
+#define IRQ_CP_CPPLDINT (IRQ_PIC_START+26)
+#define IRQ_CP_ETHINT (IRQ_PIC_START+27)
+#define IRQ_CP_TSPENINT (IRQ_PIC_START+28)
+#define IRQ_PIC_END (IRQ_PIC_START+28)
-#define IRQ_CIC_START 32
-#define IRQ_CM_SOFTINT 32
-#define IRQ_CM_COMMRX 33
-#define IRQ_CM_COMMTX 34
-#define IRQ_CIC_END 34
+#define IRQ_CIC_START (IRQ_PIC_END+1)
+#define IRQ_CM_SOFTINT (IRQ_CIC_START+0)
+#define IRQ_CM_COMMRX (IRQ_CIC_START+1)
+#define IRQ_CM_COMMTX (IRQ_CIC_START+2)
+#define IRQ_CIC_END (IRQ_CIC_START+2)
/*
* IntegratorCP only
*/
-#define IRQ_SIC_START 35
-#define IRQ_SIC_CP_SOFTINT 35
-#define IRQ_SIC_CP_RI0 36
-#define IRQ_SIC_CP_RI1 37
-#define IRQ_SIC_CP_CARDIN 38
-#define IRQ_SIC_CP_LMINT0 39
-#define IRQ_SIC_CP_LMINT1 40
-#define IRQ_SIC_CP_LMINT2 41
-#define IRQ_SIC_CP_LMINT3 42
-#define IRQ_SIC_CP_LMINT4 43
-#define IRQ_SIC_CP_LMINT5 44
-#define IRQ_SIC_CP_LMINT6 45
-#define IRQ_SIC_CP_LMINT7 46
-#define IRQ_SIC_END 46
-
-#define NR_IRQS_INTEGRATOR_AP 34
-#define NR_IRQS_INTEGRATOR_CP 47
+#define IRQ_SIC_START (IRQ_CIC_END+1)
+#define IRQ_SIC_CP_SOFTINT (IRQ_SIC_START+0)
+#define IRQ_SIC_CP_RI0 (IRQ_SIC_START+1)
+#define IRQ_SIC_CP_RI1 (IRQ_SIC_START+2)
+#define IRQ_SIC_CP_CARDIN (IRQ_SIC_START+3)
+#define IRQ_SIC_CP_LMINT0 (IRQ_SIC_START+4)
+#define IRQ_SIC_CP_LMINT1 (IRQ_SIC_START+5)
+#define IRQ_SIC_CP_LMINT2 (IRQ_SIC_START+6)
+#define IRQ_SIC_CP_LMINT3 (IRQ_SIC_START+7)
+#define IRQ_SIC_CP_LMINT4 (IRQ_SIC_START+8)
+#define IRQ_SIC_CP_LMINT5 (IRQ_SIC_START+9)
+#define IRQ_SIC_CP_LMINT6 (IRQ_SIC_START+10)
+#define IRQ_SIC_CP_LMINT7 (IRQ_SIC_START+11)
+#define IRQ_SIC_END (IRQ_SIC_START+11)
diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
index ec467baade0..be5859efe10 100644
--- a/arch/arm/mach-integrator/include/mach/platform.h
+++ b/arch/arm/mach-integrator/include/mach/platform.h
@@ -190,7 +190,6 @@
#define INTEGRATOR_SC_CTRLC_OFFSET 0x0C
#define INTEGRATOR_SC_DEC_OFFSET 0x10
#define INTEGRATOR_SC_ARB_OFFSET 0x14
-#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18
#define INTEGRATOR_SC_LOCK_OFFSET 0x1C
#define INTEGRATOR_SC_BASE 0x11000000
@@ -324,6 +323,10 @@
*/
#define PHYS_PCI_V3_BASE 0x62000000
+#define PCI_MEMORY_VADDR IOMEM(0xe8000000)
+#define PCI_CONFIG_VADDR IOMEM(0xec000000)
+#define PCI_V3_VADDR IOMEM(0xed000000)
+
/* ------------------------------------------------------------------------
* Integrator Interrupt Controllers
* ------------------------------------------------------------------------
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index c857501c578..11e2a414580 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -31,8 +31,16 @@
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/irqchip/versatile-fpga.h>
#include <linux/mtd/physmap.h>
#include <linux/clk.h>
+#include <linux/platform_data/clk-integrator.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/stat.h>
+#include <linux/sys_soc.h>
+#include <linux/termios.h>
#include <video/vga.h>
#include <mach/hardware.h>
@@ -49,13 +57,15 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
#include <asm/mach/time.h>
-#include <plat/fpga-irq.h>
-
#include "common.h"
-/*
+/* Base address to the AP system controller */
+void __iomem *ap_syscon_base;
+
+/*
* All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
* is the (PA >> 12).
*
@@ -63,7 +73,6 @@
* just for now).
*/
#define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE)
-#define VA_SC_BASE __io_address(INTEGRATOR_SC_BASE)
#define VA_EBI_BASE __io_address(INTEGRATOR_EBI_BASE)
#define VA_CMIC_BASE __io_address(INTEGRATOR_HDR_IC)
@@ -72,7 +81,7 @@
* e8000000 40000000 PCI memory PHYS_PCI_MEM_BASE (max 512M)
* ec000000 61000000 PCI config space PHYS_PCI_CONFIG_BASE (max 16M)
* ed000000 62000000 PCI V3 regs PHYS_PCI_V3_BASE (max 64k)
- * ee000000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M)
+ * fee00000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M)
* ef000000 Cache flush
* f1000000 10000000 Core module registers
* f1100000 11000000 System controller registers
@@ -92,11 +101,6 @@ static struct map_desc ap_io_desc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE
}, {
- .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
.virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE),
.length = SZ_4K,
@@ -117,11 +121,6 @@ static struct map_desc ap_io_desc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE
}, {
- .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
.virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
.length = SZ_4K,
@@ -132,48 +131,28 @@ static struct map_desc ap_io_desc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE
}, {
- .virtual = PCI_MEMORY_VADDR,
+ .virtual = (unsigned long)PCI_MEMORY_VADDR,
.pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
- .virtual = PCI_CONFIG_VADDR,
+ .virtual = (unsigned long)PCI_CONFIG_VADDR,
.pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
- .virtual = PCI_V3_VADDR,
+ .virtual = (unsigned long)PCI_V3_VADDR,
.pfn = __phys_to_pfn(PHYS_PCI_V3_BASE),
.length = SZ_64K,
.type = MT_DEVICE
- }, {
- .virtual = PCI_IO_VADDR,
- .pfn = __phys_to_pfn(PHYS_PCI_IO_BASE),
- .length = SZ_64K,
- .type = MT_DEVICE
}
};
static void __init ap_map_io(void)
{
iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
- vga_base = PCI_MEMORY_VADDR;
-}
-
-#define INTEGRATOR_SC_VALID_INT 0x003fffff
-
-static void __init ap_init_irq(void)
-{
- /* Disable all interrupts initially. */
- /* Do the core module ones */
- writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
-
- /* do the header card stuff next */
- writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
- writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
-
- fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
- -1, INTEGRATOR_SC_VALID_INT, NULL);
+ vga_base = (unsigned long)PCI_MEMORY_VADDR;
+ pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE));
}
#ifdef CONFIG_PM
@@ -216,8 +195,6 @@ device_initcall(irq_syscore_init);
/*
* Flash handling.
*/
-#define SC_CTRLC (VA_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET)
-#define SC_CTRLS (VA_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET)
#define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
#define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
@@ -225,7 +202,8 @@ static int ap_flash_init(struct platform_device *dev)
{
u32 tmp;
- writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, SC_CTRLC);
+ writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP,
+ ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
tmp = readl(EBI_CSR1) | INTEGRATOR_EBI_WRITE_ENABLE;
writel(tmp, EBI_CSR1);
@@ -242,7 +220,8 @@ static void ap_flash_exit(struct platform_device *dev)
{
u32 tmp;
- writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, SC_CTRLC);
+ writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP,
+ ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
tmp = readl(EBI_CSR1) & ~INTEGRATOR_EBI_WRITE_ENABLE;
writel(tmp, EBI_CSR1);
@@ -256,9 +235,12 @@ static void ap_flash_exit(struct platform_device *dev)
static void ap_flash_set_vpp(struct platform_device *pdev, int on)
{
- void __iomem *reg = on ? SC_CTRLS : SC_CTRLC;
-
- writel(INTEGRATOR_SC_CTRL_nFLVPPEN, reg);
+ if (on)
+ writel(INTEGRATOR_SC_CTRL_nFLVPPEN,
+ ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET);
+ else
+ writel(INTEGRATOR_SC_CTRL_nFLVPPEN,
+ ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
}
static struct physmap_flash_data ap_flash_data = {
@@ -268,56 +250,51 @@ static struct physmap_flash_data ap_flash_data = {
.set_vpp = ap_flash_set_vpp,
};
-static struct resource cfi_flash_resource = {
- .start = INTEGRATOR_FLASH_BASE,
- .end = INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device cfi_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &ap_flash_data,
- },
- .num_resources = 1,
- .resource = &cfi_flash_resource,
-};
-
-static void __init ap_init(void)
+/*
+ * For the PL010 found in the Integrator/AP some of the UART control is
+ * implemented in the system controller and accessed using a callback
+ * from the driver.
+ */
+static void integrator_uart_set_mctrl(struct amba_device *dev,
+ void __iomem *base, unsigned int mctrl)
{
- unsigned long sc_dec;
- int i;
-
- platform_device_register(&cfi_flash_device);
+ unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
+ u32 phybase = dev->res.start;
+
+ if (phybase == INTEGRATOR_UART0_BASE) {
+ /* UART0 */
+ rts_mask = 1 << 4;
+ dtr_mask = 1 << 5;
+ } else {
+ /* UART1 */
+ rts_mask = 1 << 6;
+ dtr_mask = 1 << 7;
+ }
- sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET);
- for (i = 0; i < 4; i++) {
- struct lm_device *lmdev;
+ if (mctrl & TIOCM_RTS)
+ ctrlc |= rts_mask;
+ else
+ ctrls |= rts_mask;
- if ((sc_dec & (16 << i)) == 0)
- continue;
-
- lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
- if (!lmdev)
- continue;
+ if (mctrl & TIOCM_DTR)
+ ctrlc |= dtr_mask;
+ else
+ ctrls |= dtr_mask;
- lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
- lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
- lmdev->resource.flags = IORESOURCE_MEM;
- lmdev->irq = IRQ_AP_EXPINT0 + i;
- lmdev->id = i;
-
- lm_device_register(lmdev);
- }
+ __raw_writel(ctrls, ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET);
+ __raw_writel(ctrlc, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
}
+struct amba_pl010_data ap_uart_data = {
+ .set_mctrl = integrator_uart_set_mctrl,
+};
+
/*
* Where is the timer (VA)?
*/
-#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
-#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
-#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
+#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
static unsigned long timer_reload;
@@ -326,9 +303,9 @@ static u32 notrace integrator_read_sched_clock(void)
return -readl((void __iomem *) TIMER2_VA_BASE + TIMER_VALUE);
}
-static void integrator_clocksource_init(unsigned long inrate)
+static void integrator_clocksource_init(unsigned long inrate,
+ void __iomem *base)
{
- void __iomem *base = (void __iomem *)TIMER2_VA_BASE;
u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
unsigned long rate = inrate;
@@ -345,7 +322,7 @@ static void integrator_clocksource_init(unsigned long inrate)
setup_sched_clock(integrator_read_sched_clock, 16, rate);
}
-static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
+static void __iomem * clkevt_base;
/*
* IRQ handler for the timer
@@ -417,11 +394,13 @@ static struct irqaction integrator_timer_irq = {
.dev_id = &integrator_clockevent,
};
-static void integrator_clockevent_init(unsigned long inrate)
+static void integrator_clockevent_init(unsigned long inrate,
+ void __iomem *base, int irq)
{
unsigned long rate = inrate;
unsigned int ctrl = 0;
+ clkevt_base = base;
/* Calculate and program a divisor */
if (rate > 0x100000 * HZ) {
rate /= 256;
@@ -433,16 +412,232 @@ static void integrator_clockevent_init(unsigned long inrate)
timer_reload = rate / HZ;
writel(ctrl, clkevt_base + TIMER_CTRL);
- setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
+ setup_irq(irq, &integrator_timer_irq);
clockevents_config_and_register(&integrator_clockevent,
rate,
1,
0xffffU);
}
+void __init ap_init_early(void)
+{
+}
+
+#ifdef CONFIG_OF
+
+static void __init ap_init_timer_of(void)
+{
+ struct device_node *node;
+ const char *path;
+ void __iomem *base;
+ int err;
+ int irq;
+ struct clk *clk;
+ unsigned long rate;
+
+ clk = clk_get_sys("ap_timer", NULL);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+ rate = clk_get_rate(clk);
+
+ err = of_property_read_string(of_aliases,
+ "arm,timer-primary", &path);
+ if (WARN_ON(err))
+ return;
+ node = of_find_node_by_path(path);
+ base = of_iomap(node, 0);
+ if (WARN_ON(!base))
+ return;
+ writel(0, base + TIMER_CTRL);
+ integrator_clocksource_init(rate, base);
+
+ err = of_property_read_string(of_aliases,
+ "arm,timer-secondary", &path);
+ if (WARN_ON(err))
+ return;
+ node = of_find_node_by_path(path);
+ base = of_iomap(node, 0);
+ if (WARN_ON(!base))
+ return;
+ irq = irq_of_parse_and_map(node, 0);
+ writel(0, base + TIMER_CTRL);
+ integrator_clockevent_init(rate, base, irq);
+}
+
+static struct sys_timer ap_of_timer = {
+ .init = ap_init_timer_of,
+};
+
+static const struct of_device_id fpga_irq_of_match[] __initconst = {
+ { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
+ { /* Sentinel */ }
+};
+
+static void __init ap_init_irq_of(void)
+{
+ /* disable core module IRQs */
+ writel(0xffffffffU, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+ of_irq_init(fpga_irq_of_match);
+ integrator_clk_init(false);
+}
+
+/* For the Device Tree, add in the UART callbacks as AUXDATA */
+static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
+ "rtc", NULL),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
+ "uart0", &ap_uart_data),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
+ "uart1", &ap_uart_data),
+ OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
+ "kmi0", NULL),
+ OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
+ "kmi1", NULL),
+ OF_DEV_AUXDATA("cfi-flash", INTEGRATOR_FLASH_BASE,
+ "physmap-flash", &ap_flash_data),
+ { /* sentinel */ },
+};
+
+static void __init ap_init_of(void)
+{
+ unsigned long sc_dec;
+ struct device_node *root;
+ struct device_node *syscon;
+ struct device *parent;
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+ u32 ap_sc_id;
+ int err;
+ int i;
+
+ /* Here we create an SoC device for the root node */
+ root = of_find_node_by_path("/");
+ if (!root)
+ return;
+ syscon = of_find_node_by_path("/syscon");
+ if (!syscon)
+ return;
+
+ ap_syscon_base = of_iomap(syscon, 0);
+ if (!ap_syscon_base)
+ return;
+
+ ap_sc_id = readl(ap_syscon_base);
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return;
+
+ err = of_property_read_string(root, "compatible",
+ &soc_dev_attr->soc_id);
+ if (err)
+ return;
+ err = of_property_read_string(root, "model", &soc_dev_attr->machine);
+ if (err)
+ return;
+ soc_dev_attr->family = "Integrator";
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c",
+ 'A' + (ap_sc_id & 0x0f));
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR_OR_NULL(soc_dev)) {
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr);
+ return;
+ }
+
+ parent = soc_device_to_device(soc_dev);
+
+ if (!IS_ERR_OR_NULL(parent))
+ integrator_init_sysfs(parent, ap_sc_id);
+
+ of_platform_populate(root, of_default_bus_match_table,
+ ap_auxdata_lookup, parent);
+
+ sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
+ for (i = 0; i < 4; i++) {
+ struct lm_device *lmdev;
+
+ if ((sc_dec & (16 << i)) == 0)
+ continue;
+
+ lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
+ if (!lmdev)
+ continue;
+
+ lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
+ lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
+ lmdev->resource.flags = IORESOURCE_MEM;
+ lmdev->irq = IRQ_AP_EXPINT0 + i;
+ lmdev->id = i;
+
+ lm_device_register(lmdev);
+ }
+}
+
+static const char * ap_dt_board_compat[] = {
+ "arm,integrator-ap",
+ NULL,
+};
+
+DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
+ .reserve = integrator_reserve,
+ .map_io = ap_map_io,
+ .init_early = ap_init_early,
+ .init_irq = ap_init_irq_of,
+ .handle_irq = fpga_handle_irq,
+ .timer = &ap_of_timer,
+ .init_machine = ap_init_of,
+ .restart = integrator_restart,
+ .dt_compat = ap_dt_board_compat,
+MACHINE_END
+
+#endif
+
+#ifdef CONFIG_ATAGS
+
+/*
+ * For the ATAG boot some static mappings are needed. This will
+ * go away with the ATAG support down the road.
+ */
+
+static struct map_desc ap_io_desc_atag[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ },
+};
+
+static void __init ap_map_io_atag(void)
+{
+ iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag));
+ ap_syscon_base = __io_address(INTEGRATOR_SC_BASE);
+ ap_map_io();
+}
+
/*
- * Set up timer(s).
+ * This is where non-devicetree initialization code is collected and stashed
+ * for eventual deletion.
*/
+
+static struct resource cfi_flash_resource = {
+ .start = INTEGRATOR_FLASH_BASE,
+ .end = INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device cfi_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ap_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &cfi_flash_resource,
+};
+
static void __init ap_init_timer(void)
{
struct clk *clk;
@@ -450,31 +645,80 @@ static void __init ap_init_timer(void)
clk = clk_get_sys("ap_timer", NULL);
BUG_ON(IS_ERR(clk));
- clk_enable(clk);
+ clk_prepare_enable(clk);
rate = clk_get_rate(clk);
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
- integrator_clocksource_init(rate);
- integrator_clockevent_init(rate);
+ integrator_clocksource_init(rate, (void __iomem *)TIMER2_VA_BASE);
+ integrator_clockevent_init(rate, (void __iomem *)TIMER1_VA_BASE,
+ IRQ_TIMERINT1);
}
static struct sys_timer ap_timer = {
.init = ap_init_timer,
};
+#define INTEGRATOR_SC_VALID_INT 0x003fffff
+
+static void __init ap_init_irq(void)
+{
+ /* Disable all interrupts initially. */
+ /* Do the core module ones */
+ writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+
+ /* do the header card stuff next */
+ writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
+ writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
+
+ fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
+ -1, INTEGRATOR_SC_VALID_INT, NULL);
+ integrator_clk_init(false);
+}
+
+static void __init ap_init(void)
+{
+ unsigned long sc_dec;
+ int i;
+
+ platform_device_register(&cfi_flash_device);
+
+ sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
+ for (i = 0; i < 4; i++) {
+ struct lm_device *lmdev;
+
+ if ((sc_dec & (16 << i)) == 0)
+ continue;
+
+ lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
+ if (!lmdev)
+ continue;
+
+ lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
+ lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
+ lmdev->resource.flags = IORESOURCE_MEM;
+ lmdev->irq = IRQ_AP_EXPINT0 + i;
+ lmdev->id = i;
+
+ lm_device_register(lmdev);
+ }
+
+ integrator_init(false);
+}
+
MACHINE_START(INTEGRATOR, "ARM-Integrator")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.reserve = integrator_reserve,
- .map_io = ap_map_io,
- .nr_irqs = NR_IRQS_INTEGRATOR_AP,
- .init_early = integrator_init_early,
+ .map_io = ap_map_io_atag,
+ .init_early = ap_init_early,
.init_irq = ap_init_irq,
.handle_irq = fpga_handle_irq,
.timer = &ap_timer,
.init_machine = ap_init,
.restart = integrator_restart,
MACHINE_END
+
+#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a56c5360893..7322838c044 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -20,9 +20,14 @@
#include <linux/amba/clcd.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
+#include <linux/irqchip/versatile-fpga.h>
#include <linux/gfp.h>
-#include <linux/clkdev.h>
#include <linux/mtd/physmap.h>
+#include <linux/platform_data/clk-integrator.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/sys_soc.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -43,23 +48,17 @@
#include <asm/hardware/timer-sp.h>
#include <plat/clcd.h>
-#include <plat/fpga-irq.h>
#include <plat/sched_clock.h>
#include "common.h"
+/* Base address to the CP controller */
+static void __iomem *intcp_con_base;
+
#define INTCP_PA_FLASH_BASE 0x24000000
-#define INTCP_FLASH_SIZE SZ_32M
#define INTCP_PA_CLCD_BASE 0xc0000000
-#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40)
-#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE)
-#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE)
-
-#define INTCP_ETH_SIZE 0x10
-
-#define INTCP_VA_CTRL_BASE IO_ADDRESS(INTEGRATOR_CP_CTL_BASE)
#define INTCP_FLASHPROG 0x04
#define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0)
#define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1)
@@ -86,11 +85,6 @@ static struct map_desc intcp_io_desc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE
}, {
- .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
.virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE),
.length = SZ_4K,
@@ -111,11 +105,6 @@ static struct map_desc intcp_io_desc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE
}, {
- .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
.virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
.length = SZ_4K,
@@ -130,11 +119,6 @@ static struct map_desc intcp_io_desc[] __initdata = {
.pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
.length = SZ_4K,
.type = MT_DEVICE
- }, {
- .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
}
};
@@ -143,92 +127,6 @@ static void __init intcp_map_io(void)
iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
}
-static void __init intcp_init_irq(void)
-{
- u32 pic_mask, cic_mask, sic_mask;
-
- /* These masks are for the HW IRQ registers */
- pic_mask = ~((~0u) << (11 - IRQ_PIC_START));
- pic_mask |= (~((~0u) << (29 - 22))) << 22;
- cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
- sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
-
- /*
- * Disable all interrupt sources
- */
- writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
- writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
- writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
- writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
- writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
- writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
-
- fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
- -1, pic_mask, NULL);
-
- fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
- -1, cic_mask, NULL);
-
- fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
- IRQ_CP_CPPLDINT, sic_mask, NULL);
-}
-
-/*
- * Clock handling
- */
-#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
-#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c)
-
-static const struct icst_params cp_auxvco_params = {
- .ref = 24000000,
- .vco_max = ICST525_VCO_MAX_5V,
- .vco_min = ICST525_VCO_MIN,
- .vd_min = 8,
- .vd_max = 263,
- .rd_min = 3,
- .rd_max = 65,
- .s2div = icst525_s2div,
- .idx2s = icst525_idx2s,
-};
-
-static void cp_auxvco_set(struct clk *clk, struct icst_vco vco)
-{
- u32 val;
-
- val = readl(clk->vcoreg) & ~0x7ffff;
- val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
- writel(0xa05f, CM_LOCK);
- writel(val, clk->vcoreg);
- writel(0, CM_LOCK);
-}
-
-static const struct clk_ops cp_auxclk_ops = {
- .round = icst_clk_round,
- .set = icst_clk_set,
- .setvco = cp_auxvco_set,
-};
-
-static struct clk cp_auxclk = {
- .ops = &cp_auxclk_ops,
- .params = &cp_auxvco_params,
- .vcoreg = CM_AUXOSC,
-};
-
-static struct clk sp804_clk = {
- .rate = 1000000,
-};
-
-static struct clk_lookup cp_lookups[] = {
- { /* CLCD */
- .dev_id = "mb:c0",
- .clk = &cp_auxclk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .clk = &sp804_clk,
- },
-};
-
/*
* Flash handling.
*/
@@ -236,9 +134,9 @@ static int intcp_flash_init(struct platform_device *dev)
{
u32 val;
- val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+ val = readl(intcp_con_base + INTCP_FLASHPROG);
val |= CINTEGRATOR_FLASHPROG_FLWREN;
- writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+ writel(val, intcp_con_base + INTCP_FLASHPROG);
return 0;
}
@@ -247,21 +145,21 @@ static void intcp_flash_exit(struct platform_device *dev)
{
u32 val;
- val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+ val = readl(intcp_con_base + INTCP_FLASHPROG);
val &= ~(CINTEGRATOR_FLASHPROG_FLVPPEN|CINTEGRATOR_FLASHPROG_FLWREN);
- writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+ writel(val, intcp_con_base + INTCP_FLASHPROG);
}
static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
- val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+ val = readl(intcp_con_base + INTCP_FLASHPROG);
if (on)
val |= CINTEGRATOR_FLASHPROG_FLVPPEN;
else
val &= ~CINTEGRATOR_FLASHPROG_FLVPPEN;
- writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+ writel(val, intcp_con_base + INTCP_FLASHPROG);
}
static struct physmap_flash_data intcp_flash_data = {
@@ -271,47 +169,6 @@ static struct physmap_flash_data intcp_flash_data = {
.set_vpp = intcp_flash_set_vpp,
};
-static struct resource intcp_flash_resource = {
- .start = INTCP_PA_FLASH_BASE,
- .end = INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device intcp_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &intcp_flash_data,
- },
- .num_resources = 1,
- .resource = &intcp_flash_resource,
-};
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = INTEGRATOR_CP_ETH_BASE,
- .end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CP_ETHINT,
- .end = IRQ_CP_ETHINT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct platform_device *intcp_devs[] __initdata = {
- &intcp_flash_device,
- &smc91x_device,
-};
-
/*
* It seems that the card insertion interrupt remains active after
* we've acknowledged it. We therefore ignore the interrupt, and
@@ -320,8 +177,8 @@ static struct platform_device *intcp_devs[] __initdata = {
*/
static unsigned int mmc_status(struct device *dev)
{
- unsigned int status = readl(IO_ADDRESS(0xca000000 + 4));
- writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8));
+ unsigned int status = readl(__io_address(0xca000000 + 4));
+ writel(8, intcp_con_base + 8);
return status & 8;
}
@@ -333,16 +190,6 @@ static struct mmci_platform_data mmc_data = {
.gpio_cd = -1,
};
-#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
-#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
-
-static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
- INTEGRATOR_CP_MMC_IRQS, &mmc_data);
-
-static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
- INTEGRATOR_CP_AACI_IRQS, NULL);
-
-
/*
* CLCD support
*/
@@ -393,38 +240,272 @@ static struct clcd_board clcd_data = {
.remove = versatile_clcd_remove_dma,
};
-static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
- { IRQ_CP_CLCDCINT }, &clcd_data);
-
-static struct amba_device *amba_devs[] __initdata = {
- &mmc_device,
- &aaci_device,
- &clcd_device,
-};
-
#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
static void __init intcp_init_early(void)
{
- clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups));
-
- integrator_init_early();
-
#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK
versatile_sched_clock_init(REFCOUNTER, 24000000);
#endif
}
-static void __init intcp_init(void)
+#ifdef CONFIG_OF
+
+static void __init intcp_timer_init_of(void)
{
- int i;
+ struct device_node *node;
+ const char *path;
+ void __iomem *base;
+ int err;
+ int irq;
+
+ err = of_property_read_string(of_aliases,
+ "arm,timer-primary", &path);
+ if (WARN_ON(err))
+ return;
+ node = of_find_node_by_path(path);
+ base = of_iomap(node, 0);
+ if (WARN_ON(!base))
+ return;
+ writel(0, base + TIMER_CTRL);
+ sp804_clocksource_init(base, node->name);
+
+ err = of_property_read_string(of_aliases,
+ "arm,timer-secondary", &path);
+ if (WARN_ON(err))
+ return;
+ node = of_find_node_by_path(path);
+ base = of_iomap(node, 0);
+ if (WARN_ON(!base))
+ return;
+ irq = irq_of_parse_and_map(node, 0);
+ writel(0, base + TIMER_CTRL);
+ sp804_clockevents_init(base, irq, node->name);
+}
- platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
+static struct sys_timer cp_of_timer = {
+ .init = intcp_timer_init_of,
+};
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
- struct amba_device *d = amba_devs[i];
- amba_device_register(d, &iomem_resource);
+static const struct of_device_id fpga_irq_of_match[] __initconst = {
+ { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
+ { /* Sentinel */ }
+};
+
+static void __init intcp_init_irq_of(void)
+{
+ of_irq_init(fpga_irq_of_match);
+ integrator_clk_init(true);
+}
+
+/*
+ * For the Device Tree, add in the UART, MMC and CLCD specifics as AUXDATA
+ * and enforce the bus names since these are used for clock lookups.
+ */
+static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
+ "rtc", NULL),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
+ "uart0", NULL),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
+ "uart1", NULL),
+ OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
+ "kmi0", NULL),
+ OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
+ "kmi1", NULL),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
+ "mmci", &mmc_data),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_AACI_BASE,
+ "aaci", &mmc_data),
+ OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
+ "clcd", &clcd_data),
+ OF_DEV_AUXDATA("cfi-flash", INTCP_PA_FLASH_BASE,
+ "physmap-flash", &intcp_flash_data),
+ { /* sentinel */ },
+};
+
+static void __init intcp_init_of(void)
+{
+ struct device_node *root;
+ struct device_node *cpcon;
+ struct device *parent;
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+ u32 intcp_sc_id;
+ int err;
+
+ /* Here we create an SoC device for the root node */
+ root = of_find_node_by_path("/");
+ if (!root)
+ return;
+ cpcon = of_find_node_by_path("/cpcon");
+ if (!cpcon)
+ return;
+
+ intcp_con_base = of_iomap(cpcon, 0);
+ if (!intcp_con_base)
+ return;
+
+ intcp_sc_id = readl(intcp_con_base);
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return;
+
+ err = of_property_read_string(root, "compatible",
+ &soc_dev_attr->soc_id);
+ if (err)
+ return;
+ err = of_property_read_string(root, "model", &soc_dev_attr->machine);
+ if (err)
+ return;
+ soc_dev_attr->family = "Integrator";
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c",
+ 'A' + (intcp_sc_id & 0x0f));
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR_OR_NULL(soc_dev)) {
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr);
+ return;
}
+
+ parent = soc_device_to_device(soc_dev);
+
+ if (!IS_ERR_OR_NULL(parent))
+ integrator_init_sysfs(parent, intcp_sc_id);
+
+ of_platform_populate(root, of_default_bus_match_table,
+ intcp_auxdata_lookup, parent);
+}
+
+static const char * intcp_dt_board_compat[] = {
+ "arm,integrator-cp",
+ NULL,
+};
+
+DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
+ .reserve = integrator_reserve,
+ .map_io = intcp_map_io,
+ .init_early = intcp_init_early,
+ .init_irq = intcp_init_irq_of,
+ .handle_irq = fpga_handle_irq,
+ .timer = &cp_of_timer,
+ .init_machine = intcp_init_of,
+ .restart = integrator_restart,
+ .dt_compat = intcp_dt_board_compat,
+MACHINE_END
+
+#endif
+
+#ifdef CONFIG_ATAGS
+
+/*
+ * For the ATAG boot some static mappings are needed. This will
+ * go away with the ATAG support down the road.
+ */
+
+static struct map_desc intcp_io_desc_atag[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ },
+};
+
+static void __init intcp_map_io_atag(void)
+{
+ iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag));
+ intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE);
+ intcp_map_io();
+}
+
+
+/*
+ * This is where non-devicetree initialization code is collected and stashed
+ * for eventual deletion.
+ */
+
+#define INTCP_FLASH_SIZE SZ_32M
+
+static struct resource intcp_flash_resource = {
+ .start = INTCP_PA_FLASH_BASE,
+ .end = INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device intcp_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &intcp_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &intcp_flash_resource,
+};
+
+#define INTCP_ETH_SIZE 0x10
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = INTEGRATOR_CP_ETH_BASE,
+ .end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_CP_ETHINT,
+ .end = IRQ_CP_ETHINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct platform_device *intcp_devs[] __initdata = {
+ &intcp_flash_device,
+ &smc91x_device,
+};
+
+#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40)
+#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE)
+#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE)
+
+static void __init intcp_init_irq(void)
+{
+ u32 pic_mask, cic_mask, sic_mask;
+
+ /* These masks are for the HW IRQ registers */
+ pic_mask = ~((~0u) << (11 - 0));
+ pic_mask |= (~((~0u) << (29 - 22))) << 22;
+ cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
+ sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
+
+ /*
+ * Disable all interrupt sources
+ */
+ writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
+ writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
+ writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
+ writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
+ writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
+ writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
+
+ fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
+ -1, pic_mask, NULL);
+
+ fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
+ -1, cic_mask, NULL);
+
+ fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
+ IRQ_CP_CPPLDINT, sic_mask, NULL);
+
+ integrator_clk_init(true);
}
#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
@@ -445,12 +526,42 @@ static struct sys_timer cp_timer = {
.init = intcp_timer_init,
};
+#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
+#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
+
+static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
+ INTEGRATOR_CP_MMC_IRQS, &mmc_data);
+
+static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
+ INTEGRATOR_CP_AACI_IRQS, NULL);
+
+static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
+ { IRQ_CP_CLCDCINT }, &clcd_data);
+
+static struct amba_device *amba_devs[] __initdata = {
+ &mmc_device,
+ &aaci_device,
+ &clcd_device,
+};
+
+static void __init intcp_init(void)
+{
+ int i;
+
+ platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+ integrator_init(true);
+}
+
MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.reserve = integrator_reserve,
- .map_io = intcp_map_io,
- .nr_irqs = NR_IRQS_INTEGRATOR_CP,
+ .map_io = intcp_map_io_atag,
.init_early = intcp_init_early,
.init_irq = intcp_init_irq,
.handle_irq = fpga_handle_irq,
@@ -458,3 +569,5 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
.init_machine = intcp_init,
.restart = integrator_restart,
MACHINE_END
+
+#endif
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 466defa9784..7a7f6d3273b 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -1,90 +1,125 @@
/*
- * linux/arch/arm/mach-integrator/leds.c
+ * Driver for the 4 user LEDs found on the Integrator AP/CP baseboard
+ * Based on Versatile and RealView machine LED code
*
- * Integrator/AP and Integrator/CP LED control routines
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <mach/cm.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <mach/cm.h>
-static int saved_leds;
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+
+#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
+#define LEDREG (__io_address(INTEGRATOR_DBG_BASE) + INTEGRATOR_DBG_LEDS_OFFSET)
-static void integrator_leds_event(led_event_t ledevt)
+struct integrator_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} integrator_leds[] = {
+ { "integrator:green0", "heartbeat", },
+ { "integrator:yellow", },
+ { "integrator:red", },
+ { "integrator:green1", },
+ { "integrator:core_module", "cpu0", },
+};
+
+static void integrator_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- unsigned long flags;
- const unsigned int dbg_base = IO_ADDRESS(INTEGRATOR_DBG_BASE);
- unsigned int update_alpha_leds;
+ struct integrator_led *led = container_of(cdev,
+ struct integrator_led, cdev);
+ u32 reg = __raw_readl(LEDREG);
- // yup, change the LEDs
- local_irq_save(flags);
- update_alpha_leds = 0;
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
- switch(ledevt) {
- case led_idle_start:
- cm_control(CM_CTRL_LED, 0);
- break;
+ while (__raw_readl(ALPHA_REG) & 1)
+ cpu_relax();
- case led_idle_end:
- cm_control(CM_CTRL_LED, CM_CTRL_LED);
- break;
+ __raw_writel(reg, LEDREG);
+}
- case led_timer:
- saved_leds ^= GREEN_LED;
- update_alpha_leds = 1;
- break;
+static enum led_brightness integrator_led_get(struct led_classdev *cdev)
+{
+ struct integrator_led *led = container_of(cdev,
+ struct integrator_led, cdev);
+ u32 reg = __raw_readl(LEDREG);
- case led_red_on:
- saved_leds |= RED_LED;
- update_alpha_leds = 1;
- break;
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
- case led_red_off:
- saved_leds &= ~RED_LED;
- update_alpha_leds = 1;
- break;
+static void cm_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ if (b != LED_OFF)
+ cm_control(CM_CTRL_LED, CM_CTRL_LED);
+ else
+ cm_control(CM_CTRL_LED, 0);
+}
- default:
- break;
- }
+static enum led_brightness cm_led_get(struct led_classdev *cdev)
+{
+ u32 reg = readl(CM_CTRL);
- if (update_alpha_leds) {
- while (__raw_readl(dbg_base + INTEGRATOR_DBG_ALPHA_OFFSET) & 1);
- __raw_writel(saved_leds, dbg_base + INTEGRATOR_DBG_LEDS_OFFSET);
- }
- local_irq_restore(flags);
+ return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
}
-static int __init leds_init(void)
+static int __init integrator_leds_init(void)
{
- if (machine_is_integrator() || machine_is_cintegrator())
- leds_event = integrator_leds_event;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(integrator_leds); i++) {
+ struct integrator_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+
+ led->cdev.name = integrator_leds[i].name;
+
+ if (i == 4) { /* Setting for LED in core module */
+ led->cdev.brightness_set = cm_led_set;
+ led->cdev.brightness_get = cm_led_get;
+ } else {
+ led->cdev.brightness_set = integrator_led_set;
+ led->cdev.brightness_get = integrator_led_get;
+ }
+
+ led->cdev.default_trigger = integrator_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
return 0;
}
-core_initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(integrator_leds_init);
+#endif
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index b866880e82a..e7fcea7f330 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -41,61 +41,61 @@
/*
* The V3 PCI interface chip in Integrator provides several windows from
* local bus memory into the PCI memory areas. Unfortunately, there
- * are not really enough windows for our usage, therefore we reuse
+ * are not really enough windows for our usage, therefore we reuse
* one of the windows for access to PCI configuration space. The
* memory map is as follows:
- *
+ *
* Local Bus Memory Usage
- *
+ *
* 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable
* 50000000 - 5FFFFFFF PCI memory. 256M prefetchable
* 60000000 - 60FFFFFF PCI IO. 16M
* 61000000 - 61FFFFFF PCI Configuration. 16M
- *
+ *
* There are three V3 windows, each described by a pair of V3 registers.
* These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
* Base0 and Base1 can be used for any type of PCI memory access. Base2
* can be used either for PCI I/O or for I20 accesses. By default, uHAL
* uses this only for PCI IO space.
- *
+ *
* Normally these spaces are mapped using the following base registers:
- *
+ *
* Usage Local Bus Memory Base/Map registers used
- *
+ *
* Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
* Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1
* IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
* Cfg 61000000 - 61FFFFFF
- *
+ *
* This means that I20 and PCI configuration space accesses will fail.
- * When PCI configuration accesses are needed (via the uHAL PCI
+ * When PCI configuration accesses are needed (via the uHAL PCI
* configuration space primitives) we must remap the spaces as follows:
- *
+ *
* Usage Local Bus Memory Base/Map registers used
- *
+ *
* Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
* Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0
* IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
* Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1
- *
+ *
* To make this work, the code depends on overlapping windows working.
- * The V3 chip translates an address by checking its range within
+ * The V3 chip translates an address by checking its range within
* each of the BASE/MAP pairs in turn (in ascending register number
* order). It will use the first matching pair. So, for example,
* if the same address is mapped by both LB_BASE0/LB_MAP0 and
- * LB_BASE1/LB_MAP1, the V3 will use the translation from
+ * LB_BASE1/LB_MAP1, the V3 will use the translation from
* LB_BASE0/LB_MAP0.
- *
+ *
* To allow PCI Configuration space access, the code enlarges the
* window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes
* the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
* be remapped for use by configuration cycles.
- *
- * At the end of the PCI Configuration space accesses,
+ *
+ * At the end of the PCI Configuration space accesses,
* LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window
* mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
* reveal the now restored LB_BASE1/LB_MAP1 window.
- *
+ *
* NOTE: We do not set up I2O mapping. I suspect that this is only
* for an intelligent (target) device. Using I2O disables most of
* the mappings into PCI memory.
@@ -127,8 +127,8 @@
*
* returns: configuration address to play on the PCI bus
*
- * To generate the appropriate PCI configuration cycles in the PCI
- * configuration address space, you present the V3 with the following pattern
+ * To generate the appropriate PCI configuration cycles in the PCI
+ * configuration address space, you present the V3 with the following pattern
* (which is very nearly a type 1 (except that the lower two bits are 00 and
* not 01). In order for this mapping to work you need to set up one of
* the local to PCI aperatures to 16Mbytes in length translating to
@@ -138,7 +138,7 @@
*
* Type 0:
*
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
+ * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
@@ -150,7 +150,7 @@
*
* Type 1:
*
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
+ * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
@@ -161,7 +161,7 @@
* 15:11 Device number (5 bits)
* 10:8 function number
* 7:2 register number
- *
+ *
*/
static DEFINE_RAW_SPINLOCK(v3_lock);
@@ -181,7 +181,7 @@ static DEFINE_RAW_SPINLOCK(v3_lock);
#undef V3_LB_BASE_PREFETCH
#define V3_LB_BASE_PREFETCH 0
-static unsigned long v3_open_config_window(struct pci_bus *bus,
+static void __iomem *v3_open_config_window(struct pci_bus *bus,
unsigned int devfn, int offset)
{
unsigned int address, mapaddress, busnr;
@@ -191,12 +191,9 @@ static unsigned long v3_open_config_window(struct pci_bus *bus,
/*
* Trap out illegal values
*/
- if (offset > 255)
- BUG();
- if (busnr > 255)
- BUG();
- if (devfn > 255)
- BUG();
+ BUG_ON(offset > 255);
+ BUG_ON(busnr > 255);
+ BUG_ON(devfn > 255);
if (busnr == 0) {
int slot = PCI_SLOT(devfn);
@@ -280,7 +277,7 @@ static void v3_close_config_window(void)
static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *val)
{
- unsigned long addr;
+ void __iomem *addr;
unsigned long flags;
u32 v;
@@ -311,7 +308,7 @@ static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 val)
{
- unsigned long addr;
+ void __iomem *addr;
unsigned long flags;
raw_spin_lock_irqsave(&v3_lock, flags);
@@ -374,12 +371,9 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys)
}
/*
- * the IO resource for this bus
* the mem resource for this bus
* the prefetch mem resource for this bus
*/
- pci_add_resource_offset(&sys->resources,
- &ioport_resource, sys->io_offset);
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
@@ -391,9 +385,10 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys)
* means I can't get additional information on the reason for the pm2fb
* problems. I suppose I'll just have to mind-meld with the machine. ;)
*/
-#define SC_PCI IO_ADDRESS(INTEGRATOR_SC_PCIENABLE)
-#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20)
-#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24)
+static void __iomem *ap_syscon_base;
+#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18
+#define INTEGRATOR_SC_LBFADDR_OFFSET 0x20
+#define INTEGRATOR_SC_LBFCODE_OFFSET 0x24
static int
v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
@@ -404,13 +399,13 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
char buf[128];
sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n",
- addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
+ addr, fsr, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
v3_readb(V3_LB_ISTAT));
printk(KERN_DEBUG "%s", buf);
#endif
v3_writeb(V3_LB_ISTAT, 0);
- __raw_writel(3, SC_PCI);
+ __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
/*
* If the instruction being executed was a read,
@@ -452,15 +447,15 @@ static irqreturn_t v3_irq(int dummy, void *devid)
sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
- __raw_readl(SC_LBFADDR),
- __raw_readl(SC_LBFCODE) & 255,
+ __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET),
+ __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
v3_readb(V3_LB_ISTAT));
printascii(buf);
#endif
v3_writew(V3_PCI_STAT, 0xf000);
v3_writeb(V3_LB_ISTAT, 0);
- __raw_writel(3, SC_PCI);
+ __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
#ifdef CONFIG_DEBUG_LL
/*
@@ -480,6 +475,9 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
{
int ret = 0;
+ if (!ap_syscon_base)
+ return -EINVAL;
+
if (nr == 0) {
sys->mem_offset = PHYS_PCI_MEM_BASE;
ret = pci_v3_setup_resources(sys);
@@ -498,7 +496,13 @@ void __init pci_v3_preinit(void)
unsigned int temp;
int ret;
- pcibios_min_io = 0x6000;
+ /* Remap the Integrator system controller */
+ ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
+ if (!ap_syscon_base) {
+ pr_err("unable to remap the AP syscon for PCIv3\n");
+ return;
+ }
+
pcibios_min_mem = 0x00100000;
/*
@@ -572,7 +576,7 @@ void __init pci_v3_preinit(void)
v3_writeb(V3_LB_ISTAT, 0);
v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10));
v3_writeb(V3_LB_IMASK, 0x28);
- __raw_writel(3, SC_PCI);
+ __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
/*
* Grab the PCI error interrupt.