aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/include/mach/at91_twi.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91/include/mach/at91_twi.h')
-rw-r--r--arch/arm/mach-at91/include/mach/at91_twi.h68
1 files changed, 0 insertions, 68 deletions
diff --git a/arch/arm/mach-at91/include/mach/at91_twi.h b/arch/arm/mach-at91/include/mach/at91_twi.h
deleted file mode 100644
index bb2880f6ba3..00000000000
--- a/arch/arm/mach-at91/include/mach/at91_twi.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_twi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Two-wire Interface (TWI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TWI_H
-#define AT91_TWI_H
-
-#define AT91_TWI_CR 0x00 /* Control Register */
-#define AT91_TWI_START (1 << 0) /* Send a Start Condition */
-#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */
-#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */
-#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */
-#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */
-#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */
-#define AT91_TWI_SWRST (1 << 7) /* Software Reset */
-
-#define AT91_TWI_MMR 0x04 /* Master Mode Register */
-#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */
-#define AT91_TWI_IADRSZ_NO (0 << 8)
-#define AT91_TWI_IADRSZ_1 (1 << 8)
-#define AT91_TWI_IADRSZ_2 (2 << 8)
-#define AT91_TWI_IADRSZ_3 (3 << 8)
-#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */
-#define AT91_TWI_DADR (0x7f << 16) /* Device Address */
-
-#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */
-#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */
-
-#define AT91_TWI_IADR 0x0c /* Internal Address Register */
-
-#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */
-#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */
-#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */
-#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */
-
-#define AT91_TWI_SR 0x20 /* Status Register */
-#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */
-#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */
-#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */
-#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */
-#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */
-#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */
-#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */
-#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */
-#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */
-#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */
-#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */
-#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */
-
-#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */
-#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */
-#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */
-#define AT91_TWI_RHR 0x30 /* Receive Holding Register */
-#define AT91_TWI_THR 0x34 /* Transmit Holding Register */
-
-#endif
-