aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/board-sam9-l9260.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91/board-sam9-l9260.c')
-rw-r--r--arch/arm/mach-at91/board-sam9-l9260.c43
1 files changed, 31 insertions, 12 deletions
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index cdd21f2595d..b75fbf6003a 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -37,9 +37,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
#include <mach/at91sam9_smc.h>
+#include "at91_aic.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
@@ -72,7 +73,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
@@ -157,19 +158,34 @@ static void __init ek_add_device_nand(void)
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 1,
- .wire4 = 1,
- .det_pin = AT91_PIN_PC8,
- .wp_pin = AT91_PIN_PC4,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+ .slot[1] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PC8,
+ .wp_pin = AT91_PIN_PC4,
+ },
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PA9,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PA6,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
};
static void __init ek_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -193,15 +209,18 @@ static void __init ek_board_init(void)
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &ek_mci0_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
/* Maintainer: Olimex */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,