aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx28-cfa10036.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/imx28-cfa10036.dts')
-rw-r--r--arch/arm/boot/dts/imx28-cfa10036.dts98
1 files changed, 98 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
new file mode 100644
index 0000000..1594694
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+ model = "Crystalfontz CFA-10036 Board";
+ compatible = "crystalfontz,cfa10036", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_cfa10036>;
+
+ hog_pins_cfa10036: hog-10036@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ led_pins_cfa10036: leds-10036@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a
+ &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <4>;
+ status = "okay";
+ };
+ };
+
+ apbx@80040000 {
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4_pins_a>;
+ status = "okay";
+ };
+
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_b>;
+ status = "okay";
+ };
+
+ i2c0: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_b>;
+ status = "okay";
+
+ ssd1307: oled@3c {
+ compatible = "solomon,ssd1307fb-i2c";
+ reg = <0x3c>;
+ pwms = <&pwm 4 3000>;
+ reset-gpios = <&gpio2 7 0>;
+ };
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_cfa10036>;
+
+ power {
+ gpios = <&gpio3 4 1>;
+ default-state = "on";
+ };
+ };
+};