aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/at91sam9n12.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/at91sam9n12.dtsi')
-rw-r--r--arch/arm/boot/dts/at91sam9n12.dtsi289
1 files changed, 247 insertions, 42 deletions
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index cb84de7..80e29c6 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -26,6 +26,9 @@
gpio3 = &pioD;
tcb0 = &tcb0;
tcb1 = &tcb1;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ ssc0 = &ssc0;
};
cpus {
cpu@0 {
@@ -50,7 +53,7 @@
ranges;
aic: interrupt-controller@fffff000 {
- #interrupt-cells = <2>;
+ #interrupt-cells = <3>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
@@ -74,7 +77,7 @@
pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
- interrupts = <1 4>;
+ interrupts = <1 4 7>;
};
shdwc@fffffe10 {
@@ -82,100 +85,300 @@
reg = <0xfffffe10 0x10>;
};
+ mmc0: mmc@f0008000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf0008000 0x600>;
+ interrupts = <12 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
tcb0: timer@f8008000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
- interrupts = <17 4>;
+ interrupts = <17 4 0>;
};
tcb1: timer@f800c000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf800c000 0x100>;
- interrupts = <17 4>;
+ interrupts = <17 4 0>;
};
dma: dma-controller@ffffec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
- interrupts = <20 4>;
+ interrupts = <20 4 0>;
};
- pioA: gpio@fffff400 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <2 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
+ pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x800>;
- pioB: gpio@fffff600 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <2 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
+ atmel,mux-mask = <
+ /* A B C */
+ 0xffffffff 0xffe07983 0x00000000 /* pioA */
+ 0x00040000 0x00047e0f 0x00000000 /* pioB */
+ 0xfdffffff 0x07c00000 0xb83fffff /* pioC */
+ 0x003fffff 0x003f8000 0x00000000 /* pioD */
+ >;
- pioC: gpio@fffff800 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <3 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- };
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <0 9 0x1 0x0 /* PA9 periph A */
+ 0 10 0x1 0x1>; /* PA10 periph with pullup */
+ };
+ };
- pioD: gpio@fffffa00 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffffa00 0x100>;
- interrupts = <3 4>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <0 1 0x1 0x1 /* PA1 periph A with pullup */
+ 0 0 0x1 0x0>; /* PA0 periph A */
+ };
+
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <0 2 0x1 0x0>; /* PA2 periph A */
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <0 3 0x1 0x0>; /* PA3 periph A */
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <0 6 0x1 0x1 /* PA6 periph A with pullup */
+ 0 5 0x1 0x0>; /* PA5 periph A */
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <0 8 0x1 0x1 /* PA8 periph A with pullup */
+ 0 7 0x1 0x0>; /* PA7 periph A */
+ };
+
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins =
+ <1 0 0x2 0x0>; /* PB0 periph B */
+ };
+
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins =
+ <1 1 0x2 0x0>; /* PB1 periph B */
+ };
+ };
+
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <2 23 0x2 0x1 /* PC23 periph B with pullup */
+ 2 22 0x2 0x0>; /* PC22 periph B */
+ };
+
+ pinctrl_usart3_rts: usart3_rts-0 {
+ atmel,pins =
+ <2 24 0x2 0x0>; /* PC24 periph B */
+ };
+
+ pinctrl_usart3_cts: usart3_cts-0 {
+ atmel,pins =
+ <2 25 0x2 0x0>; /* PC25 periph B */
+ };
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <2 9 0x3 0x1 /* PC9 periph C with pullup */
+ 2 8 0x3 0x0>; /* PC8 periph C */
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <2 16 0x3 0x1 /* PC17 periph C with pullup */
+ 2 17 0x3 0x0>; /* PC16 periph C */
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/
+ 3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 17 0x1 0x0 /* PA17 periph A */
+ 0 16 0x1 0x1 /* PA16 periph A with pullup */
+ 0 15 0x1 0x1>; /* PA15 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 18 0x1 0x1 /* PA18 periph A with pullup */
+ 0 19 0x1 0x1 /* PA19 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA20 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+ atmel,pins =
+ <0 11 0x2 0x1 /* PA11 periph B with pullup */
+ 0 12 0x2 0x1 /* PA12 periph B with pullup */
+ 0 13 0x2 0x1 /* PA13 periph B with pullup */
+ 0 14 0x2 0x1>; /* PA14 periph B with pullup */
+ };
+ };
+
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <0 24 0x2 0x0 /* PA24 periph B */
+ 0 25 0x2 0x0 /* PA25 periph B */
+ 0 26 0x2 0x0>; /* PA26 periph B */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0>; /* PA29 periph B */
+ };
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@fffffa00 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
- interrupts = <1 4>;
+ interrupts = <1 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ status = "disabled";
+ };
+
+ ssc0: ssc@f0010000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf0010000 0x4000>;
+ interrupts = <28 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
usart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x4000>;
- interrupts = <5 4>;
+ interrupts = <5 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
usart1: serial@f8020000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x4000>;
- interrupts = <6 4>;
+ interrupts = <6 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
usart2: serial@f8024000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x4000>;
- interrupts = <7 4>;
+ interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
usart3: serial@f8028000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8028000 0x4000>;
- interrupts = <8 4>;
+ interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@f8010000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf8010000 0x100>;
+ interrupts = <9 4 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@f8014000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf8014000 0x100>;
+ interrupts = <10 4 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
@@ -191,6 +394,8 @@
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioD 5 0
&pioD 4 0
0
@@ -201,7 +406,7 @@
usb0: ohci@00500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
- interrupts = <22 4>;
+ interrupts = <22 4 2>;
status = "disabled";
};
};