aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/w1
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/w1')
-rw-r--r--Documentation/w1/slaves/w1_ds28e0436
-rw-r--r--Documentation/w1/slaves/w1_therm2
2 files changed, 38 insertions, 0 deletions
diff --git a/Documentation/w1/slaves/w1_ds28e04 b/Documentation/w1/slaves/w1_ds28e04
new file mode 100644
index 00000000000..85bc9a7e02f
--- /dev/null
+++ b/Documentation/w1/slaves/w1_ds28e04
@@ -0,0 +1,36 @@
+Kernel driver w1_ds28e04
+========================
+
+Supported chips:
+ * Maxim DS28E04-100 4096-Bit Addressable 1-Wire EEPROM with PIO
+
+supported family codes:
+ W1_FAMILY_DS28E04 0x1C
+
+Author: Markus Franke, <franke.m@sebakmt.com> <franm@hrz.tu-chemnitz.de>
+
+Description
+-----------
+
+Support is provided through the sysfs files "eeprom" and "pio". CRC checking
+during memory accesses can optionally be enabled/disabled via the device
+attribute "crccheck". The strong pull-up can optionally be enabled/disabled
+via the module parameter "w1_strong_pullup".
+
+Memory Access
+
+ A read operation on the "eeprom" file reads the given amount of bytes
+ from the EEPROM of the DS28E04.
+
+ A write operation on the "eeprom" file writes the given byte sequence
+ to the EEPROM of the DS28E04. If CRC checking mode is enabled only
+ fully alligned blocks of 32 bytes with valid CRC16 values (in bytes 30
+ and 31) are allowed to be written.
+
+PIO Access
+
+ The 2 PIOs of the DS28E04-100 are accessible via the "pio" sysfs file.
+
+ The current status of the PIO's is returned as an 8 bit value. Bit 0/1
+ represent the state of PIO_0/PIO_1. Bits 2..7 do not care. The PIO's are
+ driven low-active, i.e. the driver delivers/expects low-active values.
diff --git a/Documentation/w1/slaves/w1_therm b/Documentation/w1/slaves/w1_therm
index 0403aaaba87..874a8ca93fe 100644
--- a/Documentation/w1/slaves/w1_therm
+++ b/Documentation/w1/slaves/w1_therm
@@ -3,6 +3,7 @@ Kernel driver w1_therm
Supported chips:
* Maxim ds18*20 based temperature sensors.
+ * Maxim ds1825 based temperature sensors.
Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
@@ -15,6 +16,7 @@ supported family codes:
W1_THERM_DS18S20 0x10
W1_THERM_DS1822 0x22
W1_THERM_DS18B20 0x28
+W1_THERM_DS1825 0x3B
Support is provided through the sysfs w1_slave file. Each open and
read sequence will initiate a temperature conversion then provide two