aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
-rw-r--r--Documentation/devicetree/bindings/mfd/88pm860x.txt85
-rw-r--r--Documentation/devicetree/bindings/mfd/ab8500.txt163
-rw-r--r--Documentation/devicetree/bindings/mfd/max77686.txt59
-rw-r--r--Documentation/devicetree/bindings/mfd/stmpe.txt28
-rw-r--r--Documentation/devicetree/bindings/mfd/syscon.txt20
-rw-r--r--Documentation/devicetree/bindings/mfd/tps65910.txt96
-rw-r--r--Documentation/devicetree/bindings/mfd/twl4030-audio.txt46
-rw-r--r--Documentation/devicetree/bindings/mfd/twl6040.txt11
8 files changed, 490 insertions, 18 deletions
diff --git a/Documentation/devicetree/bindings/mfd/88pm860x.txt b/Documentation/devicetree/bindings/mfd/88pm860x.txt
new file mode 100644
index 00000000000..63f3ee33759
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/88pm860x.txt
@@ -0,0 +1,85 @@
+* Marvell 88PM860x Power Management IC
+
+Required parent device properties:
+- compatible : "marvell,88pm860x"
+- reg : the I2C slave address for the 88pm860x chip
+- interrupts : IRQ line for the 88pm860x chip
+- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain)
+- #interrupt-cells : should be 1.
+ - The cell is the 88pm860x local IRQ number
+
+Optional parent device properties:
+- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read
+- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. <reg> stores the I2C address
+ of one chip, and this property stores the I2C address of
+ another chip.
+
+88pm860x consists of a large and varied group of sub-devices:
+
+Device Supply Names Description
+------ ------------ -----------
+88pm860x-onkey : : On key
+88pm860x-rtc : : RTC
+88pm8607 : : Regulators
+88pm860x-backlight : : Backlight
+88pm860x-led : : Led
+88pm860x-touch : : Touchscreen
+
+Example:
+
+ pmic: 88pm860x@34 {
+ compatible = "marvell,88pm860x";
+ reg = <0x34>;
+ interrupts = <4>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ marvell,88pm860x-irq-read-clr;
+ marvell,88pm860x-slave-addr = <0x11>;
+
+ regulators {
+ BUCK1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ rtc {
+ marvell,88pm860x-vrtc = <1>;
+ };
+ touch {
+ marvell,88pm860x-gpadc-prebias = <1>;
+ marvell,88pm860x-gpadc-slot-cycle = <1>;
+ marvell,88pm860x-tsi-prebias = <6>;
+ marvell,88pm860x-pen-prebias = <16>;
+ marvell,88pm860x-pen-prechg = <2>;
+ marvell,88pm860x-resistor-X = <300>;
+ };
+ backlights {
+ backlight-0 {
+ marvell,88pm860x-iset = <4>;
+ marvell,88pm860x-pwm = <3>;
+ };
+ backlight-2 {
+ };
+ };
+ leds {
+ led0-red {
+ marvell,88pm860x-iset = <12>;
+ };
+ led0-green {
+ marvell,88pm860x-iset = <12>;
+ };
+ led0-blue {
+ marvell,88pm860x-iset = <12>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
new file mode 100644
index 00000000000..13b707b7355
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -0,0 +1,163 @@
+* AB8500 Multi-Functional Device (MFD)
+
+Required parent device properties:
+- compatible : contains "stericsson,ab8500";
+- interrupts : contains the IRQ line for the AB8500
+- interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain)
+- #interrupt-cells : should be 2, for 2-cell format
+ - The first cell is the AB8500 local IRQ number
+ - The second cell is used to specify optional parameters
+ - bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+
+Optional parent device properties:
+- reg : contains the PRCMU mailbox address for the AB8500 i2c port
+
+The AB8500 consists of a large and varied group of sub-devices:
+
+Device IRQ Names Supply Names Description
+------ --------- ------------ -----------
+ab8500-bm : : : Battery Manager
+ab8500-btemp : : : Battery Temperature
+ab8500-charger : : : Battery Charger
+ab8500-codec : : : Audio Codec
+ab8500-fg : : vddadc : Fuel Gauge
+ : NCONV_ACCU : : Accumulate N Sample Conversion
+ : BATT_OVV : : Battery Over Voltage
+ : LOW_BAT_F : : LOW threshold battery voltage
+ : CC_INT_CALIB : : Coulomb Counter Internal Calibration
+ : CCEOC : : Coulomb Counter End of Conversion
+ab8500-btemp : : vtvout : Battery Temperature
+ : BAT_CTRL_INDB : : Battery Removal Indicator
+ : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C
+ : BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
+ : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
+ : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
+ab8500-charger : : vddadc : Charger interface
+ : MAIN_CH_UNPLUG_DET : : main charger unplug detection management (not in 8505)
+ : MAIN_CHARGE_PLUG_DET : : main charger plug detection management (not in 8505)
+ : MAIN_EXT_CH_NOT_OK : : main charger not OK
+ : MAIN_CH_TH_PROT_R : : Die temp is above main charger
+ : MAIN_CH_TH_PROT_F : : Die temp is below main charger
+ : VBUS_DET_F : : VBUS falling detected
+ : VBUS_DET_R : : VBUS rising detected
+ : USB_LINK_STATUS : : USB link status has changed
+ : USB_CH_TH_PROT_R : : Die temp is above usb charger
+ : USB_CH_TH_PROT_F : : Die temp is below usb charger
+ : USB_CHARGER_NOT_OKR : : allowed USB charger not ok detection
+ : VBUS_OVV : : Overvoltage on Vbus ball detected (USB charge is stopped)
+ : CH_WD_EXP : : Charger watchdog detected
+ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
+ SW_CONV_END : :
+ab8500-gpio : : : GPIO Controller
+ab8500-ponkey : ONKEY_DBF : : Power-on Key
+ ONKEY_DBR : :
+ab8500-pwm : : : Pulse Width Modulator
+ab8500-regulator : : : Regulators
+ab8500-rtc : 60S : : Real Time Clock
+ : ALARM : :
+ab8500-sysctrl : : : System Control
+ab8500-usb : ID_WAKEUP_R : vddulpivio18 : Universal Serial Bus
+ : ID_WAKEUP_F : v-ape :
+ : VBUS_DET_F : musb_1v8 :
+ : VBUS_DET_R : :
+ : USB_LINK_STATUS : :
+ : USB_ADP_PROBE_PLUG : :
+ : USB_ADP_PROBE_UNPLUG : :
+
+Required child device properties:
+- compatible : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey|
+ pwm|regulator|rtc|sysctrl|usb]";
+
+Optional child device properties:
+- interrupts : contains the device IRQ(s) using the 2-cell format (see above)
+- interrupt-names : contains names of IRQ resource in the order in which they were
+ supplied in the interrupts property
+- <supply_name>-supply : contains a phandle to the regulator supply node in Device Tree
+
+Non-standard child device properties:
+ - Audio CODEC:
+ - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential)
+ - stericsson,amic1a-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic
+ - stericsson,amic1b-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic
+ - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic
+ - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
+
+ab8500@5 {
+ compatible = "stericsson,ab8500";
+ reg = <5>; /* mailbox 5 is i2c */
+ interrupts = <0 40 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ab8500-rtc {
+ compatible = "stericsson,ab8500-rtc";
+ interrupts = <17 0x4
+ 18 0x4>;
+ interrupt-names = "60S", "ALARM";
+ };
+
+ ab8500-gpadc {
+ compatible = "stericsson,ab8500-gpadc";
+ interrupts = <32 0x4
+ 39 0x4>;
+ interrupt-names = "HW_CONV_END", "SW_CONV_END";
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ };
+
+ ab8500-usb {
+ compatible = "stericsson,ab8500-usb";
+ interrupts = < 90 0x4
+ 96 0x4
+ 14 0x4
+ 15 0x4
+ 79 0x4
+ 74 0x4
+ 75 0x4>;
+ interrupt-names = "ID_WAKEUP_R",
+ "ID_WAKEUP_F",
+ "VBUS_DET_F",
+ "VBUS_DET_R",
+ "USB_LINK_STATUS",
+ "USB_ADP_PROBE_PLUG",
+ "USB_ADP_PROBE_UNPLUG";
+ vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+ v-ape-supply = <&db8500_vape_reg>;
+ musb_1v8-supply = <&db8500_vsmps2_reg>;
+ };
+
+ ab8500-ponkey {
+ compatible = "stericsson,ab8500-ponkey";
+ interrupts = <6 0x4
+ 7 0x4>;
+ interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+ };
+
+ ab8500-sysctrl {
+ compatible = "stericsson,ab8500-sysctrl";
+ };
+
+ ab8500-pwm {
+ compatible = "stericsson,ab8500-pwm";
+ };
+
+ codec: ab8500-codec {
+ compatible = "stericsson,ab8500-codec";
+
+ stericsson,earpeice-cmv = <950>; /* Units in mV. */
+ };
+
+ ab8500-regulators {
+ compatible = "stericsson,ab8500-regulator";
+
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ /*
+ * See: Documentation/devicetree/bindings/regulator/regulator.txt
+ * for more information on regulators
+ */
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
new file mode 100644
index 00000000000..c6a3469d343
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -0,0 +1,59 @@
+Maxim MAX77686 multi-function device
+
+MAX77686 is a Mulitifunction device with PMIC, RTC and Charger on chip. It is
+interfaced to host controller using i2c interface. PMIC and Charger submodules
+are addressed using same i2c slave address whereas RTC submodule uses
+different i2c slave address,presently for which we are statically creating i2c
+client while probing.This document describes the binding for mfd device and
+PMIC submodule.
+
+Required properties:
+- compatible : Must be "maxim,max77686";
+- reg : Specifies the i2c slave address of PMIC block.
+- interrupts : This i2c device has an IRQ line connected to the main SoC.
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- voltage-regulators : The regulators of max77686 have to be instantiated
+ under subnode named "voltage-regulators" using the following format.
+
+ regulator_name {
+ regulator-compatible = LDOn/BUCKn
+ standard regulator constraints....
+ };
+ refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+ The regulator-compatible property of regulator should initialized with string
+to get matched with their hardware counterparts as follow:
+
+ -LDOn : for LDOs, where n can lie in range 1 to 26.
+ example: LDO1, LDO2, LDO26.
+ -BUCKn : for BUCKs, where n can lie in range 1 to 9.
+ example: BUCK1, BUCK5, BUCK9.
+
+Example:
+
+ max77686@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 0>;
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo11_reg {
+ regulator-compatible = "LDO11";
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-always-on;
+ };
+
+ buck1_reg {
+ regulator-compatible = "BUCK1";
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ }
diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
new file mode 100644
index 00000000000..56edb552068
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
@@ -0,0 +1,28 @@
+* ST Microelectronics STMPE Multi-Functional Device
+
+STMPE is an MFD device which may expose the following inbuilt devices: gpio,
+keypad, touchscreen, adc, pwm, rotator.
+
+Required properties:
+ - compatible : "st,stmpe[610|801|811|1601|2401|2403]"
+ - reg : I2C/SPI address of the device
+
+Optional properties:
+ - interrupts : The interrupt outputs from the controller
+ - interrupt-controller : Marks the device node as an interrupt controller
+ - interrupt-parent : Specifies which IRQ controller we're connected to
+ - wakeup-source : Marks the input device as wakable
+ - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
+
+Example:
+
+ stmpe1601: stmpe1601@40 {
+ compatible = "st,stmpe1601";
+ reg = <0x40>;
+ interrupts = <26 0x4>;
+ interrupt-parent = <&gpio6>;
+ interrupt-controller;
+
+ wakeup-source;
+ st,autosleep-timeout = <1024>;
+ };
diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt
new file mode 100644
index 00000000000..fe8150bb324
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/syscon.txt
@@ -0,0 +1,20 @@
+* System Controller Registers R/W driver
+
+System controller node represents a register region containing a set
+of miscellaneous registers. The registers are not cohesive enough to
+represent as any specific type of device. The typical use-case is for
+some other node's driver, or platform-specific code, to acquire a
+reference to the syscon node (e.g. by phandle, node path, or search
+using a specific compatible value), interrogate the node (or associated
+OS driver) to determine the location of the registers, and access the
+registers directly.
+
+Required properties:
+- compatible: Should contain "syscon".
+- reg: the register region can be accessed from syscon
+
+Examples:
+gpr: iomuxc-gpr@020e0000 {
+ compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
+ reg = <0x020e0000 0x38>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
index 645f5eaadb3..2e3304888ff 100644
--- a/Documentation/devicetree/bindings/mfd/tps65910.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -17,20 +17,50 @@ Required properties:
device need to be present. The definition for each of these nodes is defined
using the standard binding for regulators found at
Documentation/devicetree/bindings/regulator/regulator.txt.
+ The regulator is matched with the regulator-compatible.
- The valid names for regulators are:
+ The valid regulator-compatible values are:
tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
vaux2, vaux33, vmmc
tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
ldo6, ldo7, ldo8
+- xxx-supply: Input voltage supply regulator.
+ These entries are require if regulators are enabled for a device. Missing of these
+ properties can cause the regulator registration fails.
+ If some of input supply is powered through battery or always-on supply then
+ also it is require to have these parameters with proper node handle of always
+ on power supply.
+ tps65910:
+ vcc1-supply: VDD1 input.
+ vcc2-supply: VDD2 input.
+ vcc3-supply: VAUX33 and VMMC input.
+ vcc4-supply: VAUX1 and VAUX2 input.
+ vcc5-supply: VPLL and VDAC input.
+ vcc6-supply: VDIG1 and VDIG2 input.
+ vcc7-supply: VRTC input.
+ vccio-supply: VIO input.
+ tps65911:
+ vcc1-supply: VDD1 input.
+ vcc2-supply: VDD2 input.
+ vcc3-supply: LDO6, LDO7 and LDO8 input.
+ vcc4-supply: LDO5 input.
+ vcc5-supply: LDO3 and LDO4 input.
+ vcc6-supply: LDO1 and LDO2 input.
+ vcc7-supply: VRTC input.
+ vccio-supply: VIO input.
+
Optional properties:
- ti,vmbch-threshold: (tps65911) main battery charged threshold
comparator. (see VMBCH_VSEL in TPS65910 datasheet)
- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
+ in TPS6591X datasheet)
- ti,en-gpio-sleep: enable sleep control for gpios
There should be 9 entries here, one for each gpio.
+- ti,system-power-controller: Telling whether or not this pmic is controlling
+ the system power.
Regulator Optional properties:
- ti,regulator-ext-sleep-control: enable external sleep
@@ -51,79 +81,117 @@ Example:
#interrupt-cells = <2>;
interrupt-controller;
+ ti,system-power-controller;
+
ti,vmbch-threshold = 0;
ti,vmbch2-threshold = 0;
-
+ ti,en-ck32k-xtal;
ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+ vcc1-supply = <&reg_parent>;
+ vcc2-supply = <&some_reg>;
+ vcc3-supply = <...>;
+ vcc4-supply = <...>;
+ vcc5-supply = <...>;
+ vcc6-supply = <...>;
+ vcc7-supply = <...>;
+ vccio-supply = <...>;
+
regulators {
- vdd1_reg: vdd1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd1_reg: regulator@0 {
+ regulator-compatible = "vdd1";
+ reg = <0>;
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <0>;
};
- vdd2_reg: vdd2 {
+ vdd2_reg: regulator@1 {
+ regulator-compatible = "vdd2";
+ reg = <1>;
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <4>;
};
- vddctrl_reg: vddctrl {
+ vddctrl_reg: regulator@2 {
+ regulator-compatible = "vddctrl";
+ reg = <2>;
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <0>;
};
- vio_reg: vio {
+ vio_reg: regulator@3 {
+ regulator-compatible = "vio";
+ reg = <3>;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <1>;
};
- ldo1_reg: ldo1 {
+ ldo1_reg: regulator@4 {
+ regulator-compatible = "ldo1";
+ reg = <4>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
ti,regulator-ext-sleep-control = <0>;
};
- ldo2_reg: ldo2 {
+ ldo2_reg: regulator@5 {
+ regulator-compatible = "ldo2";
+ reg = <5>;
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
ti,regulator-ext-sleep-control = <0>;
};
- ldo3_reg: ldo3 {
+ ldo3_reg: regulator@6 {
+ regulator-compatible = "ldo3";
+ reg = <6>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
ti,regulator-ext-sleep-control = <0>;
};
- ldo4_reg: ldo4 {
+ ldo4_reg: regulator@7 {
+ regulator-compatible = "ldo4";
+ reg = <7>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
ti,regulator-ext-sleep-control = <0>;
};
- ldo5_reg: ldo5 {
+ ldo5_reg: regulator@8 {
+ regulator-compatible = "ldo5";
+ reg = <8>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
ti,regulator-ext-sleep-control = <0>;
};
- ldo6_reg: ldo6 {
+ ldo6_reg: regulator@9 {
+ regulator-compatible = "ldo6";
+ reg = <9>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
ti,regulator-ext-sleep-control = <0>;
};
- ldo7_reg: ldo7 {
+ ldo7_reg: regulator@10 {
+ regulator-compatible = "ldo7";
+ reg = <10>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <1>;
};
- ldo8_reg: ldo8 {
+ ldo8_reg: regulator@11 {
+ regulator-compatible = "ldo8";
+ reg = <11>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-audio.txt b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt
new file mode 100644
index 00000000000..414d2ae0adf
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt
@@ -0,0 +1,46 @@
+Texas Instruments TWL family (twl4030) audio module
+
+The audio module inside the TWL family consist of an audio codec and a vibra
+driver.
+
+Required properties:
+- compatible : must be "ti,twl4030-audio"
+
+Optional properties, nodes:
+
+Audio functionality:
+- codec { }: Need to be present if the audio functionality is used. Within this
+ section the following options can be used:
+- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts
+ from the start of the recorded sample (in ms)
+-ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise
+-ti,hs_extmute: Use external mute for HS pop reduction
+-ti,hs_extmute_gpio: Use external GPIO to control the external mute
+-ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the
+ valid values.
+
+Vibra functionality
+- ti,enable-vibra: Need to be set to <1> if the vibra functionality is used. if
+ missing or it is 0, the vibra functionality is disabled.
+
+Example:
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+
+ ti,enable-vibra = <1>;
+
+ codec {
+ ti,ramp_delay_value = <3>;
+ };
+
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
index bc67c6f424a..0f5dd709d75 100644
--- a/Documentation/devicetree/bindings/mfd/twl6040.txt
+++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -1,15 +1,17 @@
Texas Instruments TWL6040 family
-The TWL6040s are 8-channel high quality low-power audio codecs providing audio
-and vibra functionality on OMAP4+ platforms.
+The TWL6040s are 8-channel high quality low-power audio codecs providing audio,
+vibra and GPO functionality on OMAP4+ platforms.
They are connected ot the host processor via i2c for commands, McPDM for audio
data and commands.
Required properties:
-- compatible : Must be "ti,twl6040";
+- compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041
- reg: must be 0x4b for i2c address
- interrupts: twl6040 has one interrupt line connecteded to the main SoC
- interrupt-parent: The parent interrupt controller
+- gpio-controller:
+- #gpio-cells = <1>: twl6040 provides GPO lines.
- twl6040,audpwron-gpio: Power on GPIO line for the twl6040
- vio-supply: Regulator for the twl6040 VIO supply
@@ -37,7 +39,6 @@ Example:
&i2c1 {
twl6040: twl@4b {
compatible = "ti,twl6040";
- reg = <0x4b>;
interrupts = <0 119 4>;
interrupt-parent = <&gic>;
@@ -60,3 +61,5 @@ Example:
};
};
};
+
+/include/ "twl6040.dtsi"