aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt')
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt55
1 files changed, 55 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
new file mode 100644
index 00000000000..e9611ace879
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
@@ -0,0 +1,55 @@
+* Samsung's I2C controller
+
+The Samsung's I2C controller is used to interface with I2C devices.
+
+Required properties:
+ - compatible: value should be either of the following.
+ (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
+ (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
+ (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
+ inside HDMIPHY block found on several samsung SoCs
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+ - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
+
+Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
+ - Samsung GPIO variant (deprecated):
+ - gpios: The order of the gpios should be the following: <SDA, SCL>.
+ The gpio specifier depends on the gpio controller. Required in all
+ cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
+ lines are permanently wired to the respective clienta
+ - Pinctrl variant (preferred, if available):
+ - pinctrl-0: Pin control group to be used for this controller.
+ - pinctrl-names: Should contain only one value - "default".
+
+Optional properties:
+ - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
+ specified, default value is 0.
+ - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
+ specified, the default value in Hz is 100000.
+
+Example:
+
+ i2c@13870000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13870000 0x100>;
+ interrupts = <345>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <100000>;
+ /* Samsung GPIO variant begins here */
+ gpios = <&gpd1 2 0 /* SDA */
+ &gpd1 3 0 /* SCL */>;
+ /* Samsung GPIO variant ends here */
+ /* Pinctrl variant begins here */
+ pinctrl-0 = <&i2c3_bus>;
+ pinctrl-names = "default";
+ /* Pinctrl variant ends here */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wm8994@1a {
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+ };
+ };