path: root/drivers/net/wireless/libertas
diff options
authorLucas De Marchi <lucas.demarchi@profusion.mobi>2011-03-30 22:57:33 -0300
committerLucas De Marchi <lucas.demarchi@profusion.mobi>2011-03-31 11:26:23 -0300
commit25985edcedea6396277003854657b5f3cb31a628 (patch)
treef026e810210a2ee7290caeb737c23cb6472b7c38 /drivers/net/wireless/libertas
parent6aba74f2791287ec407e0f92487a725a25908067 (diff)
Fix common misspellings
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Diffstat (limited to 'drivers/net/wireless/libertas')
4 files changed, 5 insertions, 5 deletions
diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README
index 60fd1afe89a..1453eec82a9 100644
--- a/drivers/net/wireless/libertas/README
+++ b/drivers/net/wireless/libertas/README
@@ -70,7 +70,7 @@ rdrf
These commands are used to read the MAC, BBP and RF registers from the
card. These commands take one parameter that specifies the offset
location that is to be read. This parameter must be specified in
- hexadecimal (its possible to preceed preceding the number with a "0x").
+ hexadecimal (its possible to precede preceding the number with a "0x").
Path: /sys/kernel/debug/libertas_wireless/ethX/registers/
@@ -84,7 +84,7 @@ wrrf
These commands are used to write the MAC, BBP and RF registers in the
card. These commands take two parameters that specify the offset
location and the value that is to be written. This parameters must
- be specified in hexadecimal (its possible to preceed the number
+ be specified in hexadecimal (its possible to precede the number
with a "0x").
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 30ef0351bfc..5caa2ac14d6 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -1350,7 +1350,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
* we remove all keys like in the WPA/WPA2 setup,
* we just don't set RSN.
- * Therefore: fall-throught
+ * Therefore: fall-through
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index fc8121190d3..8712cb213f2 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -913,7 +913,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out3;
- /* Clear any interrupt cause that happend while sending
+ /* Clear any interrupt cause that happened while sending
* firmware/initializing card */
if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
diff --git a/drivers/net/wireless/libertas/if_spi.h b/drivers/net/wireless/libertas/if_spi.h
index 8b1417d3b71..d2ac1dcd7e2 100644
--- a/drivers/net/wireless/libertas/if_spi.h
+++ b/drivers/net/wireless/libertas/if_spi.h
@@ -66,7 +66,7 @@
#define IF_SPI_HOST_INT_CTRL_REG 0x40 /* Host interrupt controller reg */
#define IF_SPI_CARD_INT_CAUSE_REG 0x44 /* Card interrupt cause reg */
-#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interupt status reg */
+#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interrupt status reg */
#define IF_SPI_CARD_INT_EVENT_MASK_REG 0x4C /* Card interrupt event mask */
#define IF_SPI_CARD_INT_STATUS_MASK_REG 0x50 /* Card interrupt status mask */