KGDB/KDB/usb-dbgp fixes and cleanups

usb-dbgp - increase the controller wait time to come out of halt.
    kdb - Remove unused KDB_FLAG_ONLY_DO_DUMP code and cpu in more prompt
    debug core - pass NMI type on archs that provide NMI types
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQG8wyAAoJEIciOldedpOjN2oP/ipaQSLnvoKUhutFl/qL2239
 mMsxh9ga9rfKuCujpSkHZUwjo3VX7put7cnhVwETd4y2gN2YWPYg4OIKt+Y0AhNe
 4NzHwB+lm6iGE33Q1x4uEHBH5aWLzWcOM/9n4avwY2DjtDfpecki5ChP/CVHK8qU
 VVF2PfY8nbxcEonCbP1b/0KaD3xrPqwgZ70HdFi5eUuXiBajAyp9c9zqVUWJ6j+H
 r+2PVkzn9NxRCkyq3tzK5gYk5SzoJPClkpB67CWugG35MiFLkz2csJNztFxtaInZ
 t8HLkMTVLdCgLZqnw/ZEVWfqQA+q6N5NS6zs9j0siLg5HbEb+UtCebPwpChdQrmh
 Sol+0vmT9Hi4Jm6onhDnQYchaDI7gMhynUC9sWAPhtSHS9e7D9c5IBLHQd3YbOHK
 c8ELzxduszw8+jaiDJStkWM+tbQzJXD9bT1KpLVJd8t9BKAmuBX7ETSD+eKtjynJ
 SgywSfVOdxXzEMvRWqeK3qgkLJYCWCfFsc+75hzJl18dRoM3NDyuOxKyOLWF9tFV
 QUjaCvndIFz7CgM7FTToJZbACqxFHRGh4UUXHiXPUBPXvE5Zt34n4VsxAXYpJc95
 1by/TBcYKWPd3hsOJOh1qMeKXD6TEwN/eEmsjBfnHTp8EBcgRtvue8ZHPMcfYnn/
 Iauy66b/nHJLRsi1gWrn
 =LAWq
 -----END PGP SIGNATURE-----

Merge tag 'for_linux-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb

Pull KGDB/KDB/usb-dbgp fixes and cleanups from Jason Wessel:
 "There are no new features, those will be delayed to the 3.7 window.
  There are only fixes/cleanup against the usual kernel churn and we are
  removing more lines than we add:

   - usb-dbgp - increase the controller wait time to come out of halt.
   - kdb - Remove unused KDB_FLAG_ONLY_DO_DUMP code and cpu in more prompt
   - debug core - pass NMI type on archs that provide NMI types"

* tag 'for_linux-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  USB: echi-dbgp: increase the controller wait time to come out of halt.
  kernel/debug: Make use of KGDB_REASON_NMI
  kdb: Remove cpu from the more prompt
  kdb: Remove unused KDB_FLAG_ONLY_DO_DUMP

drivers/usb/early/ehci-dbgp.c

@@ -450,7 +450,7 @@ static int dbgp_ehci_startup(void)
 	writel(FLAG_CF, &ehci_regs->configured_flag);
 
 	/* Wait until the controller is no longer halted */
-	loop = 10;
+	loop = 1000;
 	do {
 		status = readl(&ehci_regs->status);
 		if (!(status & STS_HALT))

include/linux/kdb.h

@@ -75,8 +75,6 @@ extern const char *kdb_diemsg;
 #define KDB_FLAG_CATASTROPHIC	(1 << 1) /* A catastrophic event has occurred */
 #define KDB_FLAG_CMD_INTERRUPT	(1 << 2) /* Previous command was interrupted */
 #define KDB_FLAG_NOIPI		(1 << 3) /* Do not send IPIs */
-#define KDB_FLAG_ONLY_DO_DUMP	(1 << 4) /* Only do a dump, used when
-					  * kdb is off */
 #define KDB_FLAG_NO_CONSOLE	(1 << 5) /* No console is available,
 					  * kdb is disabled */
 #define KDB_FLAG_NO_VT_CONSOLE	(1 << 6) /* No VT console is available, do

kernel/debug/kdb/kdb_debugger.c

@@ -12,6 +12,7 @@
 #include <linux/kdb.h>
 #include <linux/kdebug.h>
 #include <linux/export.h>
+#include <linux/hardirq.h>
 #include "kdb_private.h"
 #include "../debug_core.h"
 
@@ -52,6 +53,9 @@ int kdb_stub(struct kgdb_state *ks)
 	if (atomic_read(&kgdb_setting_breakpoint))
 		reason = KDB_REASON_KEYBOARD;
 
+	if (in_nmi())
+		reason = KDB_REASON_NMI;
+
 	for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) {
 		if ((bp->bp_enabled) && (bp->bp_addr == addr)) {
 			reason = KDB_REASON_BREAK;

kernel/debug/kdb/kdb_io.c

@@ -715,9 +715,6 @@ kdb_printit:
 	/* check for having reached the LINES number of printed lines */
 	if (kdb_nextline == linecount) {
 		char buf1[16] = "";
-#if defined(CONFIG_SMP)
-		char buf2[32];
-#endif
 
 		/* Watch out for recursion here.  Any routine that calls
 		 * kdb_printf will come back through here.  And kdb_read
@@ -732,14 +729,6 @@ kdb_printit:
 		if (moreprompt == NULL)
 			moreprompt = "more> ";
 
-#if defined(CONFIG_SMP)
-		if (strchr(moreprompt, '%')) {
-			sprintf(buf2, moreprompt, get_cpu());
-			put_cpu();
-			moreprompt = buf2;
-		}
-#endif
-
 		kdb_input_flush();
 		c = console_drivers;
 

kernel/debug/kdb/kdb_main.c

@@ -139,11 +139,10 @@ static const int __nkdb_err = sizeof(kdbmsgs) / sizeof(kdbmsg_t);
 static char *__env[] = {
 #if defined(CONFIG_SMP)
  "PROMPT=[%d]kdb> ",
- "MOREPROMPT=[%d]more> ",
 #else
  "PROMPT=kdb> ",
- "MOREPROMPT=more> ",
 #endif
+ "MOREPROMPT=more> ",
  "RADIX=16",
  "MDCOUNT=8",			/* lines of md output */
  KDB_PLATFORM_ENV,
@@ -1236,18 +1235,6 @@ static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs,
 		*cmdbuf = '\0';
 		*(cmd_hist[cmd_head]) = '\0';
 
-		if (KDB_FLAG(ONLY_DO_DUMP)) {
-			/* kdb is off but a catastrophic error requires a dump.
-			 * Take the dump and reboot.
-			 * Turn on logging so the kdb output appears in the log
-			 * buffer in the dump.
-			 */
-			const char *setargs[] = { "set", "LOGGING", "1" };
-			kdb_set(2, setargs);
-			kdb_reboot(0, NULL);
-			/*NOTREACHED*/
-		}
-
 do_full_getstr:
 #if defined(CONFIG_SMP)
 		snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT"),