aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-clps711x/include/mach
diff options
context:
space:
mode:
authorAlexander Shiyan <shc_work@mail.ru>2012-08-21 20:59:32 +0400
committerArnd Bergmann <arnd@arndb.de>2012-09-28 21:14:08 +0200
commit1c3a918f78b72fb60fcc9ca9a4cebc90de570e58 (patch)
tree230bbf1c8552c8e1d6ec13d6131789c245023225 /arch/arm/mach-clps711x/include/mach
parentafc49177b412dfe547c60740ac1f1db7f805da43 (diff)
ARM: clps711x: Remove board support for CEIVA
The current kernel does not fit in the CEIVA ROM. Also, some functional has already been removed due migrate from 2.6 to 3.0, and it seems that no one uses this platform. So, remove support for this board and modules specific only to this board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Diffstat (limited to 'arch/arm/mach-clps711x/include/mach')
-rw-r--r--arch/arm/mach-clps711x/include/mach/hardware.h48
1 files changed, 0 insertions, 48 deletions
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index 13a64fcd7dd..8497775d6ee 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -116,7 +116,6 @@
#endif /* CONFIG_ARCH_EDB7211 */
-
/*
* Relevant bits in port D, which controls power to the various parts of
* the LCD on the EDB7211.
@@ -125,51 +124,4 @@
#define EDB_PD2_LCDEN (1<<2)
#define EDB_PD3_LCDBL (1<<3)
-
-#if defined (CONFIG_ARCH_CEIVA)
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define CEIVA_PHYS_FLASH1 CS0_PHYS_BASE /* physical */
-#define CEIVA_PHYS_FLASH2 CS1_PHYS_BASE /* physical */
-
-#define CEIVA_VIRT_FLASH1 (0xfa000000) /* virtual */
-#define CEIVA_VIRT_FLASH2 (0xfb000000) /* virtual */
-
-#define CEIVA_FLASH_SIZE 0x100000
-#define CEIVA_FLASH_WIDTH 2
-
-/*
- * SED1355 LCD controller
- */
-#define CEIVA_PHYS_SED1355 CS2_PHYS_BASE
-#define CEIVA_VIRT_SED1355 (0xfc000000)
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
- */
-
-// Reset line to SED1355 (must be high to operate)
-#define CEIVA_PD1_LCDRST (1<<1)
-// LCD panel enable (set to one, to enable LCD)
-#define CEIVA_PD4_LCDEN (1<<4)
-// Backlight (set to one, to turn on backlight
-#define CEIVA_PD5_LCDBL (1<<5)
-
-/*
- * Relevant bits in port B, which report the status of the buttons.
- */
-
-// White button
-#define CEIVA_PB4_WHT_BTN (1<<4)
-// Black button
-#define CEIVA_PB0_BLK_BTN (1<<0)
-#endif // #if defined (CONFIG_ARCH_CEIVA)
-
#endif