aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorH. Peter Anvin <hpa@linux.intel.com>2013-01-31 20:22:57 -0800
committerH. Peter Anvin <hpa@linux.intel.com>2013-01-31 20:22:57 -0800
commitb5831174f9d3f12a492deda6374ca96f87b694f8 (patch)
tree96aa46239200021f9545bda5836f7e80a640d88b /Documentation
parent40a1ef95da85843696fc3ebe5fce39b0db32669f (diff)
parent88b62b915b0b7e25870eb0604ed9a92ba4bfc9f7 (diff)
Merge tag 'v3.8-rc6' into x86/urgent
Linux 3.8-rc6 Merged in order to add a documentation update versus new code in upstream. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/device-mapper/dm-raid.txt1
-rw-r--r--Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt5
-rw-r--r--Documentation/filesystems/f2fs.txt18
-rw-r--r--[-rwxr-xr-x]Documentation/hid/hid-sensor.txt0
-rw-r--r--Documentation/x86/boot.txt27
-rw-r--r--Documentation/x86/zero-page.txt4
6 files changed, 43 insertions, 12 deletions
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
index 728c38c242d..56fb62b09fc 100644
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@@ -141,3 +141,4 @@ Version History
1.2.0 Handle creation of arrays that contain failed devices.
1.3.0 Added support for RAID 10
1.3.1 Allow device replacement/rebuild for RAID 10
+1.3.2 Fix/improve redundancy checking for RAID10
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index 3a268127b05..bc50899e0c8 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -81,7 +81,8 @@ PA31 TXD4
Required properties for pin configuration node:
- atmel,pins: 4 integers array, represents a group of pins mux and config
setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
- The PERIPH 0 means gpio.
+ The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
+ PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
Bits used for CONFIG:
PULL_UP (1 << 0): indicate this pin need a pull up.
@@ -126,7 +127,7 @@ pinctrl@fffff400 {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<1 14 0x1 0x0 /* PB14 periph A */
- 1 15 0x1 0x1>; /* PB15 periph with pullup */
+ 1 15 0x1 0x1>; /* PB15 periph A with pullup */
};
};
};
diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt
index 8fbd8b46ee3..dcf338e62b7 100644
--- a/Documentation/filesystems/f2fs.txt
+++ b/Documentation/filesystems/f2fs.txt
@@ -175,9 +175,9 @@ consists of multiple segments as described below.
align with the zone size <-|
|-> align with the segment size
_________________________________________________________________________
- | | | Node | Segment | Segment | |
- | Superblock | Checkpoint | Address | Info. | Summary | Main |
- | (SB) | (CP) | Table (NAT) | Table (SIT) | Area (SSA) | |
+ | | | Segment | Node | Segment | |
+ | Superblock | Checkpoint | Info. | Address | Summary | Main |
+ | (SB) | (CP) | Table (SIT) | Table (NAT) | Area (SSA) | |
|____________|_____2______|______N______|______N______|______N_____|__N___|
. .
. .
@@ -200,14 +200,14 @@ consists of multiple segments as described below.
: It contains file system information, bitmaps for valid NAT/SIT sets, orphan
inode lists, and summary entries of current active segments.
-- Node Address Table (NAT)
- : It is composed of a block address table for all the node blocks stored in
- Main area.
-
- Segment Information Table (SIT)
: It contains segment information such as valid block count and bitmap for the
validity of all the blocks.
+- Node Address Table (NAT)
+ : It is composed of a block address table for all the node blocks stored in
+ Main area.
+
- Segment Summary Area (SSA)
: It contains summary entries which contains the owner information of all the
data and node blocks stored in Main area.
@@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are
valid, as shown as below.
+--------+----------+---------+
- | CP | NAT | SIT |
+ | CP | SIT | NAT |
+--------+----------+---------+
. . . .
. . . .
. . . .
+-------+-------+--------+--------+--------+--------+
- | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 |
+ | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 |
+-------+-------+--------+--------+--------+--------+
| ^ ^
| | |
diff --git a/Documentation/hid/hid-sensor.txt b/Documentation/hid/hid-sensor.txt
index 948b0989c43..948b0989c43 100755..100644
--- a/Documentation/hid/hid-sensor.txt
+++ b/Documentation/hid/hid-sensor.txt
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index 406d82d5d2b..3edb4c2887a 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -57,6 +57,10 @@ Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment
Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover
protocol entry point.
+Protocol 2.12: (Kernel 3.9) Added the xloadflags field and extension fields
+ to struct boot_params for for loading bzImage and ramdisk
+ above 4G in 64bit.
+
**** MEMORY LAYOUT
The traditional memory map for the kernel loader, used for Image or
@@ -182,7 +186,7 @@ Offset Proto Name Meaning
0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel
0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not
0235/1 2.10+ min_alignment Minimum alignment, as a power of two
-0236/2 N/A pad3 Unused
+0236/2 2.12+ xloadflags Boot protocol option flags
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
023C/4 2.07+ hardware_subarch Hardware subarchitecture
0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data
@@ -582,6 +586,27 @@ Protocol: 2.10+
misaligned kernel. Therefore, a loader should typically try each
power-of-two alignment from kernel_alignment down to this alignment.
+Field name: xloadflags
+Type: read
+Offset/size: 0x236/2
+Protocol: 2.12+
+
+ This field is a bitmask.
+
+ Bit 0 (read): XLF_KERNEL_64
+ - If 1, this kernel has the legacy 64-bit entry point at 0x200.
+
+ Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
+ - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
+
+ Bit 2 (read): XLF_EFI_HANDOVER_32
+ - If 1, the kernel supports the 32-bit EFI handoff entry point
+ given at handover_offset.
+
+ Bit 3 (read): XLF_EFI_HANDOVER_64
+ - If 1, the kernel supports the 64-bit EFI handoff entry point
+ given at handover_offset + 0x200.
+
Field name: cmdline_size
Type: read
Offset/size: 0x238/4
diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
index cf5437deda8..199f453cb4d 100644
--- a/Documentation/x86/zero-page.txt
+++ b/Documentation/x86/zero-page.txt
@@ -19,6 +19,9 @@ Offset Proto Name Meaning
090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!!
0A0/010 ALL sys_desc_table System description table (struct sys_desc_table)
0B0/010 ALL olpc_ofw_header OLPC's OpenFirmware CIF and friends
+0C0/004 ALL ext_ramdisk_image ramdisk_image high 32bits
+0C4/004 ALL ext_ramdisk_size ramdisk_size high 32bits
+0C8/004 ALL ext_cmd_line_ptr cmd_line_ptr high 32bits
140/080 ALL edid_info Video mode setup (struct edid_info)
1C0/020 ALL efi_info EFI 32 information (struct efi_info)
1E0/004 ALL alk_mem_k Alternative mem check, in KB
@@ -27,6 +30,7 @@ Offset Proto Name Meaning
1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below)
1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer
(below)
+1EF/001 ALL sentinel Used to detect broken bootloaders
290/040 ALL edd_mbr_sig_buffer EDD MBR signatures
2D0/A00 ALL e820_map E820 memory map table
(array of struct e820entry)