[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 1
The attached patches provides part 1 of an architecture implementation for the Tensilica Xtensa CPU series. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Chris Zankel
Linus Torvalds
parent
48b415ca13
commit
8e1a6dd2fd
|
|
@ -0,0 +1,258 @@
|
|||
# For a description of the syntax of this configuration file,
|
||||
# see Documentation/kbuild/config-language.txt.
|
||||
|
||||
mainmenu "Linux/Xtensa Kernel Configuration"
|
||||
|
||||
config FRAME_POINTER
|
||||
bool
|
||||
default n
|
||||
|
||||
config XTENSA
|
||||
bool
|
||||
default y
|
||||
help
|
||||
Xtensa processors are 32-bit RISC machines designed by Tensilica
|
||||
primarily for embedded systems. These processors are both
|
||||
configurable and extensible. The Linux port to the Xtensa
|
||||
architecture supports all processor configurations and extensions,
|
||||
with reasonable minimum requirements. The Xtensa Linux project has
|
||||
a home page at <http://xtensa.sourceforge.net/>.
|
||||
|
||||
config UID16
|
||||
bool
|
||||
default n
|
||||
|
||||
config RWSEM_XCHGADD_ALGORITHM
|
||||
bool
|
||||
default y
|
||||
|
||||
config HAVE_DEC_LOCK
|
||||
bool
|
||||
default y
|
||||
|
||||
config GENERIC_HARDIRQS
|
||||
bool
|
||||
default y
|
||||
|
||||
source "init/Kconfig"
|
||||
|
||||
menu "Processor type and features"
|
||||
|
||||
choice
|
||||
prompt "Xtensa Processor Configuration"
|
||||
default XTENSA_CPU_LINUX_BE
|
||||
|
||||
config XTENSA_CPU_LINUX_BE
|
||||
bool "linux_be"
|
||||
---help---
|
||||
The linux_be processor configuration is the baseline Xtensa
|
||||
configurations included in this kernel and also used by
|
||||
binutils, gcc, and gdb. It contains no TIE, no coprocessors,
|
||||
and the following configuration options:
|
||||
|
||||
Code Density Option 2 Misc Special Registers
|
||||
NSA/NSAU Instructions 128-bit Data Bus Width
|
||||
Processor ID 8K, 2-way I and D Caches
|
||||
Zero-Overhead Loops 2 Inst Address Break Registers
|
||||
Big Endian 2 Data Address Break Registers
|
||||
64 General-Purpose Registers JTAG Interface and Trace Port
|
||||
17 Interrupts MMU w/ TLBs and Autorefill
|
||||
3 Interrupt Levels 8 Autorefill Ways (I/D TLBs)
|
||||
3 Timers Unaligned Exceptions
|
||||
endchoice
|
||||
|
||||
config MMU
|
||||
bool
|
||||
default y
|
||||
|
||||
config XTENSA_UNALIGNED_USER
|
||||
bool "Unaligned memory access in use space"
|
||||
---help---
|
||||
The Xtensa architecture currently does not handle unaligned
|
||||
memory accesses in hardware but through an exception handler.
|
||||
Per default, unaligned memory accesses are disabled in user space.
|
||||
|
||||
Say Y here to enable unaligned memory access in user space.
|
||||
|
||||
config PREEMPT
|
||||
bool "Preemptible Kernel"
|
||||
---help---
|
||||
This option reduces the latency of the kernel when reacting to
|
||||
real-time or interactive events by allowing a low priority process to
|
||||
be preempted even if it is in kernel mode executing a system call.
|
||||
Unfortunately the kernel code has some race conditions if both
|
||||
CONFIG_SMP and CONFIG_PREEMPT are enabled, so this option is
|
||||
currently disabled if you are building an SMP kernel.
|
||||
|
||||
Say Y here if you are building a kernel for a desktop, embedded
|
||||
or real-time system. Say N if you are unsure.
|
||||
|
||||
config MATH_EMULATION
|
||||
bool "Math emulation"
|
||||
help
|
||||
Can we use information of configuration file?
|
||||
|
||||
config HIGHMEM
|
||||
bool "High memory support"
|
||||
|
||||
endmenu
|
||||
|
||||
menu "Platform options"
|
||||
|
||||
choice
|
||||
prompt "Xtensa System Type"
|
||||
default XTENSA_PLATFORM_ISS
|
||||
|
||||
config XTENSA_PLATFORM_ISS
|
||||
bool "ISS"
|
||||
help
|
||||
ISS is an acronym for Tensilica's Instruction Set Simulator.
|
||||
|
||||
config XTENSA_PLATFORM_XT2000
|
||||
bool "XT2000"
|
||||
help
|
||||
XT2000 is the name of Tensilica's feature-rich emulation platform.
|
||||
This hardware is capable of running a full Linux distribution.
|
||||
|
||||
endchoice
|
||||
|
||||
|
||||
config XTENSA_CALIBRATE_CCOUNT
|
||||
bool "Auto calibration of the CPU clock rate"
|
||||
---help---
|
||||
On some platforms (XT2000, for example), the CPU clock rate can
|
||||
vary. The frequency can be determined, however, by measuring
|
||||
against a well known, fixed frequency, such as an UART oscillator.
|
||||
|
||||
config XTENSA_CPU_CLOCK
|
||||
int "CPU clock rate [MHz]"
|
||||
depends on !XTENSA_CALIBRATE_CCOUNT
|
||||
default "16"
|
||||
|
||||
config GENERIC_CALIBRATE_DELAY
|
||||
bool "Auto calibration of the BogoMIPS value"
|
||||
---help---
|
||||
The BogoMIPS value can easily derived from the CPU frequency.
|
||||
|
||||
config CMDLINE_BOOL
|
||||
bool "Default bootloader kernel arguments"
|
||||
|
||||
config CMDLINE
|
||||
string "Initial kernel command string"
|
||||
depends on CMDLINE_BOOL
|
||||
default "console=ttyS0,38400 root=/dev/ram"
|
||||
help
|
||||
On some architectures (EBSA110 and CATS), there is currently no way
|
||||
for the boot loader to pass arguments to the kernel. For these
|
||||
architectures, you should supply some command-line options at build
|
||||
time by entering them here. As a minimum, you should specify the
|
||||
memory size and the root device (e.g., mem=64M root=/dev/nfs).
|
||||
|
||||
config SERIAL_CONSOLE
|
||||
bool
|
||||
depends on XTENSA_PLATFORM_ISS
|
||||
default y
|
||||
|
||||
config XTENSA_ISS_NETWORK
|
||||
bool
|
||||
depends on XTENSA_PLATFORM_ISS
|
||||
default y
|
||||
|
||||
endmenu
|
||||
|
||||
menu "Bus options"
|
||||
|
||||
config PCI
|
||||
bool "PCI support" if !XTENSA_PLATFORM_ISS
|
||||
depends on !XTENSA_PLATFORM_ISS
|
||||
default y
|
||||
help
|
||||
Find out whether you have a PCI motherboard. PCI is the name of a
|
||||
bus system, i.e. the way the CPU talks to the other stuff inside
|
||||
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
|
||||
VESA. If you have PCI, say Y, otherwise N.
|
||||
|
||||
The PCI-HOWTO, available from
|
||||
<http://www.linuxdoc.org/docs.html#howto>, contains valuable
|
||||
information about which PCI hardware does work under Linux and which
|
||||
doesn't
|
||||
|
||||
source "drivers/pci/Kconfig"
|
||||
|
||||
config HOTPLUG
|
||||
|
||||
bool "Support for hot-pluggable devices"
|
||||
---help---
|
||||
Say Y here if you want to plug devices into your computer while
|
||||
the system is running, and be able to use them quickly. In many
|
||||
cases, the devices can likewise be unplugged at any time too.
|
||||
|
||||
One well known example of this is PCMCIA- or PC-cards, credit-card
|
||||
size devices such as network cards, modems or hard drives which are
|
||||
plugged into slots found on all modern laptop computers. Another
|
||||
example, used on modern desktops as well as laptops, is USB.
|
||||
|
||||
Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
|
||||
software (at <http://linux-hotplug.sourceforge.net/>) and install it.
|
||||
Then your kernel will automatically call out to a user mode "policy
|
||||
agent" (/sbin/hotplug) to load modules and set up software needed
|
||||
to use devices as you hotplug them.
|
||||
|
||||
source "drivers/pcmcia/Kconfig"
|
||||
|
||||
source "drivers/pci/hotplug/Kconfig"
|
||||
|
||||
endmenu
|
||||
|
||||
menu "Exectuable file formats"
|
||||
|
||||
# only elf supported
|
||||
config KCORE_ELF
|
||||
bool
|
||||
depends on PROC_FS
|
||||
default y
|
||||
help
|
||||
If you enabled support for /proc file system then the file
|
||||
/proc/kcore will contain the kernel core image in ELF format. This
|
||||
can be used in gdb:
|
||||
|
||||
$ cd /usr/src/linux ; gdb vmlinux /proc/kcore
|
||||
|
||||
This is especially useful if you have compiled the kernel with the
|
||||
"-g" option to preserve debugging information. It is mainly used
|
||||
for examining kernel data structures on the live kernel.
|
||||
|
||||
source "fs/Kconfig.binfmt"
|
||||
|
||||
endmenu
|
||||
|
||||
source "drivers/Kconfig"
|
||||
|
||||
source "fs/Kconfig"
|
||||
|
||||
menu "Xtensa initrd options"
|
||||
depends on BLK_DEV_INITRD
|
||||
|
||||
config EMBEDDED_RAMDISK
|
||||
bool "Embed root filesystem ramdisk into the kernel"
|
||||
|
||||
config EMBEDDED_RAMDISK_IMAGE
|
||||
string "Filename of gziped ramdisk image"
|
||||
depends on EMBEDDED_RAMDISK
|
||||
default "ramdisk.gz"
|
||||
help
|
||||
This is the filename of the ramdisk image to be built into the
|
||||
kernel. Relative pathnames are relative to arch/xtensa/boot/ramdisk/.
|
||||
The ramdisk image is not part of the kernel distribution; you must
|
||||
provide one yourself.
|
||||
endmenu
|
||||
|
||||
source "arch/xtensa/Kconfig.debug"
|
||||
|
||||
source "security/Kconfig"
|
||||
|
||||
source "crypto/Kconfig"
|
||||
|
||||
source "lib/Kconfig"
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
menu "Kernel hacking"
|
||||
|
||||
source "lib/Kconfig.debug"
|
||||
|
||||
endmenu
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,102 @@
|
|||
#
|
||||
# This file is subject to the terms and conditions of the GNU General Public
|
||||
# License. See the file "COPYING" in the main directory of this archive
|
||||
# for more details.
|
||||
#
|
||||
# Copyright (C) 2001 - 2005 Tensilica Inc.
|
||||
#
|
||||
# This file is included by the global makefile so that you can add your own
|
||||
# architecture-specific flags and dependencies. Remember to do have actions
|
||||
# for "archclean" and "archdep" for cleaning up and making dependencies for
|
||||
# this architecture
|
||||
|
||||
# Core configuration.
|
||||
# (Use CPU=<xtensa_config> to use another default compiler.)
|
||||
|
||||
cpu-$(CONFIG_XTENSA_CPU_LINUX_BE) := linux_be
|
||||
cpu-$(CONFIG_XTENSA_CPU_LINUX_CUSTOM) := linux_custom
|
||||
|
||||
CPU = $(cpu-y)
|
||||
export CPU
|
||||
|
||||
# Platform configuration
|
||||
|
||||
platform-y := common
|
||||
platform-$(CONFIG_XTENSA_PLATFORM_XT2000) := xt2000
|
||||
platform-$(CONFIG_XTENSA_PLATFORM_ISS) := iss
|
||||
|
||||
PLATFORM = $(platform-y)
|
||||
export PLATFORM
|
||||
|
||||
#LDFLAGS_vmlinux := -T$(word 1,$(LINKSCRIPT))
|
||||
AFLAGS_vmlinux.lds.o := -Uxtensa
|
||||
CPPFLAGS += -Iarch/xtensa -Iinclude/asm -mlongcalls -g
|
||||
AFLAGS += -Iarch/xtensa -Iinclude/asm
|
||||
CPP = $(CC) -E $(CFLAGS)
|
||||
|
||||
cflags-y += -Iarch/xtensa -pipe -mlongcalls
|
||||
|
||||
|
||||
KBUILD_DEFCONFIG := common_defconfig
|
||||
|
||||
# ramdisk/initrd support
|
||||
# You need a compressed ramdisk image, named ramdisk.gz in
|
||||
# arch/xtensa/boot/ramdisk
|
||||
|
||||
core-$(CONFIG_EMBEDDED_RAMDISK) += arch/xtensa/boot/ramdisk/
|
||||
|
||||
# Test for cross compiling
|
||||
|
||||
ifneq ($(CPU),)
|
||||
COMPILE_ARCH = $(shell uname -m)
|
||||
|
||||
ifneq ($(COMPILE_ARCH), xtensa)
|
||||
ifndef CROSS_COMPILE
|
||||
CROSS_COMPILE = xtensa_$(CPU)-
|
||||
endif
|
||||
endif
|
||||
endif
|
||||
|
||||
#
|
||||
|
||||
LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
|
||||
|
||||
head-y := arch/xtensa/kernel/head.o
|
||||
core-y += arch/xtensa/kernel/ \
|
||||
arch/xtensa/mm/ arch/xtensa/platform-$(PLATFORM)/
|
||||
libs-y += arch/xtensa/lib/ $(LIBGCC)
|
||||
|
||||
boot := arch/xtensa/boot
|
||||
|
||||
arch/xtensa/kernel/asm-offsets.s: \
|
||||
arch/xtensa/kernel/asm-offsets.c \
|
||||
include/asm-xtensa/.platform
|
||||
|
||||
include/asm-xtensa/offsets.h: arch/xtensa/kernel/asm-offsets.s
|
||||
$(call filechk,gen-asm-offsets)
|
||||
|
||||
prepare: include/asm-xtensa/.platform include/asm-xtensa/offsets.h
|
||||
|
||||
# Update machine cpu and platform symlinks if something which affects
|
||||
# them changed.
|
||||
|
||||
include/asm-xtensa/.platform: $(wildcard include/config/arch/*.h)
|
||||
@echo ' Setting up cpu ($(CPU)) and platform ($(PLATFORM)) symlinks'
|
||||
$(Q)rm -f include/asm-xtensa/platform
|
||||
$(Q)rm -f include/asm-xtensa/xtensa/config
|
||||
$(Q)(cd include/asm-xtensa/; ln -sf platform-$(PLATFORM) platform)
|
||||
$(Q)(cd include/asm-xtensa/xtensa; ln -sf config-$(CPU) config)
|
||||
|
||||
all: zImage
|
||||
|
||||
bzImage : zImage
|
||||
|
||||
zImage zImage.initrd: vmlinux
|
||||
$(Q)$(MAKE) $(build)=$(boot) $@
|
||||
|
||||
CLEAN_FILES += arch/xtensa/vmlinux.lds include/asm-xtensa/offset.h
|
||||
|
||||
define archhelp
|
||||
@echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)'
|
||||
endef
|
||||
|
||||
|
|
@ -0,0 +1,662 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.11-rc2
|
||||
# Tue Mar 1 16:36:53 2005
|
||||
#
|
||||
# CONFIG_FRAME_POINTER is not set
|
||||
CONFIG_XTENSA=y
|
||||
# CONFIG_UID16 is not set
|
||||
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
CONFIG_HAVE_DEC_LOCK=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_SWAP=y
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
# CONFIG_IKCONFIG is not set
|
||||
# CONFIG_EMBEDDED is not set
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_ALL is not set
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
# CONFIG_MODULE_UNLOAD is not set
|
||||
CONFIG_OBSOLETE_MODPARM=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
|
||||
#
|
||||
# Processor type and features
|
||||
#
|
||||
CONFIG_XTENSA_ARCH_LINUX_BE=y
|
||||
# CONFIG_XTENSA_ARCH_LINUX_LE is not set
|
||||
# CONFIG_XTENSA_ARCH_LINUX_TEST is not set
|
||||
# CONFIG_XTENSA_ARCH_S5 is not set
|
||||
# CONFIG_XTENSA_CUSTOM is not set
|
||||
CONFIG_MMU=y
|
||||
# CONFIG_XTENSA_UNALIGNED_USER is not set
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_MATH_EMULATION is not set
|
||||
# CONFIG_HIGHMEM is not set
|
||||
|
||||
#
|
||||
# Platform options
|
||||
#
|
||||
# CONFIG_XTENSA_PLATFORM_ISS is not set
|
||||
CONFIG_XTENSA_PLATFORM_XT2000=y
|
||||
CONFIG_XTENSA_CALIBRATE_CCOUNT=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
CONFIG_CMDLINE="console=ttyS0,38400 ip=bootp root=nfs nfsroot=/opt/montavista/pro/devkit/xtensa/linux_be/target"
|
||||
|
||||
#
|
||||
# Bus options
|
||||
#
|
||||
CONFIG_PCI=y
|
||||
# CONFIG_PCI_LEGACY_PROC is not set
|
||||
# CONFIG_PCI_NAMES is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# PC-card bridges
|
||||
#
|
||||
|
||||
#
|
||||
# PCI Hotplug Support
|
||||
#
|
||||
# CONFIG_HOTPLUG_PCI is not set
|
||||
|
||||
#
|
||||
# Exectuable file formats
|
||||
#
|
||||
CONFIG_KCORE_ELF=y
|
||||
CONFIG_BINFMT_ELF=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_DEBUG_DRIVER is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
# CONFIG_MTD is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_FD is not set
|
||||
# CONFIG_BLK_CPQ_DA is not set
|
||||
# CONFIG_BLK_CPQ_CISS_DA is not set
|
||||
# CONFIG_BLK_DEV_DAC960 is not set
|
||||
# CONFIG_BLK_DEV_UMEM is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_SX8 is not set
|
||||
# CONFIG_BLK_DEV_RAM is not set
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# ATA/ATAPI/MFM/RLL support
|
||||
#
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_SCSI is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
# CONFIG_IEEE1394 is not set
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
# CONFIG_I2O is not set
|
||||
|
||||
#
|
||||
# Networking support
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
# CONFIG_PACKET is not set
|
||||
# CONFIG_NETLINK_DEV is not set
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_ADVANCED_ROUTER=y
|
||||
CONFIG_IP_MULTIPLE_TABLES=y
|
||||
CONFIG_IP_ROUTE_MULTIPATH=y
|
||||
CONFIG_IP_ROUTE_VERBOSE=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IP_PNP_RARP=y
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_IP_MROUTE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
# CONFIG_IP_TCPDIAG is not set
|
||||
# CONFIG_IP_TCPDIAG_IPV6 is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
CONFIG_NET_SCHED=y
|
||||
CONFIG_NET_SCH_CLK_JIFFIES=y
|
||||
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
|
||||
# CONFIG_NET_SCH_CLK_CPU is not set
|
||||
CONFIG_NET_SCH_CBQ=m
|
||||
CONFIG_NET_SCH_HTB=m
|
||||
# CONFIG_NET_SCH_HFSC is not set
|
||||
CONFIG_NET_SCH_PRIO=m
|
||||
CONFIG_NET_SCH_RED=m
|
||||
CONFIG_NET_SCH_SFQ=m
|
||||
CONFIG_NET_SCH_TEQL=m
|
||||
CONFIG_NET_SCH_TBF=m
|
||||
CONFIG_NET_SCH_GRED=m
|
||||
CONFIG_NET_SCH_DSMARK=m
|
||||
# CONFIG_NET_SCH_NETEM is not set
|
||||
CONFIG_NET_SCH_INGRESS=m
|
||||
CONFIG_NET_QOS=y
|
||||
CONFIG_NET_ESTIMATOR=y
|
||||
CONFIG_NET_CLS=y
|
||||
CONFIG_NET_CLS_TCINDEX=m
|
||||
CONFIG_NET_CLS_ROUTE4=m
|
||||
CONFIG_NET_CLS_ROUTE=y
|
||||
CONFIG_NET_CLS_FW=m
|
||||
CONFIG_NET_CLS_U32=m
|
||||
# CONFIG_CLS_U32_PERF is not set
|
||||
# CONFIG_NET_CLS_IND is not set
|
||||
CONFIG_NET_CLS_RSVP=m
|
||||
CONFIG_NET_CLS_RSVP6=m
|
||||
# CONFIG_NET_CLS_ACT is not set
|
||||
CONFIG_NET_CLS_POLICE=y
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DUMMY=y
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# ARCnet devices
|
||||
#
|
||||
# CONFIG_ARCNET is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
# CONFIG_MII is not set
|
||||
CONFIG_XT2000_SONIC=y
|
||||
# CONFIG_HAPPYMEAL is not set
|
||||
# CONFIG_SUNGEM is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
|
||||
#
|
||||
# Tulip family network device support
|
||||
#
|
||||
# CONFIG_NET_TULIP is not set
|
||||
# CONFIG_HP100 is not set
|
||||
# CONFIG_NET_PCI is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
# CONFIG_ACENIC is not set
|
||||
# CONFIG_DL2K is not set
|
||||
# CONFIG_E1000 is not set
|
||||
# CONFIG_NS83820 is not set
|
||||
# CONFIG_HAMACHI is not set
|
||||
# CONFIG_YELLOWFIN is not set
|
||||
# CONFIG_R8169 is not set
|
||||
# CONFIG_SK98LIN is not set
|
||||
# CONFIG_TIGON3 is not set
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
# CONFIG_IXGB is not set
|
||||
# CONFIG_S2IO is not set
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
# CONFIG_TR is not set
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
CONFIG_NET_RADIO=y
|
||||
|
||||
#
|
||||
# Obsolete Wireless cards support (pre-802.11)
|
||||
#
|
||||
CONFIG_STRIP=m
|
||||
|
||||
#
|
||||
# Wireless 802.11b ISA/PCI cards support
|
||||
#
|
||||
CONFIG_HERMES=m
|
||||
# CONFIG_PLX_HERMES is not set
|
||||
# CONFIG_TMD_HERMES is not set
|
||||
# CONFIG_PCI_HERMES is not set
|
||||
# CONFIG_ATMEL is not set
|
||||
|
||||
#
|
||||
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
|
||||
#
|
||||
# CONFIG_PRISM54 is not set
|
||||
CONFIG_NET_WIRELESS=y
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
# CONFIG_WAN is not set
|
||||
# CONFIG_FDDI is not set
|
||||
# CONFIG_HIPPI is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input I/O drivers
|
||||
#
|
||||
# CONFIG_GAMEPORT is not set
|
||||
CONFIG_SOUND_GAMEPORT=y
|
||||
CONFIG_SERIO=y
|
||||
# CONFIG_SERIO_I8042 is not set
|
||||
# CONFIG_SERIO_SERPORT is not set
|
||||
# CONFIG_SERIO_CT82C710 is not set
|
||||
# CONFIG_SERIO_PCIPS2 is not set
|
||||
# CONFIG_SERIO_RAW is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_GEN_RTC is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_APPLICOM is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Console display driver support
|
||||
#
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
# CONFIG_USB is not set
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
# CONFIG_INFINIBAND is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
# CONFIG_EXT2_FS is not set
|
||||
# CONFIG_EXT3_FS is not set
|
||||
# CONFIG_JBD is not set
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
# CONFIG_PROC_KCORE is not set
|
||||
CONFIG_SYSFS=y
|
||||
CONFIG_DEVFS_FS=y
|
||||
# CONFIG_DEVFS_MOUNT is not set
|
||||
# CONFIG_DEVFS_DEBUG is not set
|
||||
# CONFIG_DEVPTS_FS_XATTR is not set
|
||||
# CONFIG_TMPFS is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V4 is not set
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
# CONFIG_NFSD is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_LOCKD_V4=y
|
||||
# CONFIG_EXPORTFS is not set
|
||||
CONFIG_SUNRPC=y
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_DEBUG_STACKOVERFLOW is not set
|
||||
# CONFIG_DEBUG_SLAB is not set
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
# CONFIG_DEBUG_SPINLOCK is not set
|
||||
# CONFIG_DEBUG_PAGEALLOC is not set
|
||||
# CONFIG_DEBUG_INFO is not set
|
||||
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||
# CONFIG_KGDB is not set
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
# CONFIG_CRC32 is not set
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
Reference in New Issue