dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

USB fixes for 3.8-rc3 

Here are a bunch of USB fixes for your 3.8-rc3 tree.  They all either fix
 problems that have been reported (like the xhci/hub changes) or add new device
 ids to existing drivers.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlDzjz0ACgkQMUfUDdst+yn5YwCeOyqqCgQvyuP2JsacN/2a4wRN
 Wn4AoM/Pg+b+B8M7Z/SBO10DRzj24xYj
 =Kkq8
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a bunch of USB fixes for your 3.8-rc3 tree.  They all either
  fix problems that have been reported (like the xhci/hub changes) or
  add new device ids to existing drivers.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
  usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added
  usb: host: ohci-tmio: fix compile warning
  USB: Add device quirk for Microsoft VX700 webcam
  USB: ehci-fsl: fix regression on mpc5121e
  usb: chipidea: Allow disabling streaming not only in udc mode
  USB: fsl-mph-dr-of: fix regression on mpc5121e
  USB: select USB_ARCH_HAS_EHCI for MXS
  USB: hub: handle claim of enabled remote wakeup after reset
  USB: cdc-acm: Add support for "PSC Scanning, Magellan 800i"
  USB: option: add Nexpring NP10T terminal id
  USB: option: add Telekom Speedstick LTE II
  USB: option: blacklist network interface on ZTE MF880
  usb: imx21-hcd: Include missing linux/module.h
  USB: option: Add new MEDIATEK PID support
  USB: ehci: make debug port in-use detection functional again
  USB: usbtest: fix test number in log message
  xhci: Avoid "dead ports", add roothub port polling.
  USB: Handle warm reset failure on empty port.
  USB: Ignore port state until reset completes.
  USB: Increase reset timeout.
  ...
This commit is contained in:
Linus Torvalds 2013-01-14 09:07:57 -08:00
parent 3441f0d26d 8cf65dc386
commit 46fed0a57c
32 changed files with 257 additions and 89 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
drivers/usb/Kconfig
View File

@ -37,6 +37,7 @@ config USB_ARCH_HAS_EHCI
default y if ARCH_W90X900
default y if ARCH_AT91
default y if ARCH_MXC
default y if ARCH_MXS
default y if ARCH_OMAP3
default y if ARCH_CNS3XXX
default y if ARCH_VT8500

3
drivers/usb/chipidea/host.c
View File

@ -70,6 +70,9 @@ static int host_start(struct ci13xxx *ci)
else
ci->hcd = hcd;
if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
return ret;
}

3
drivers/usb/class/cdc-acm.c
View File

@ -1602,6 +1602,9 @@ static const struct usb_device_id acm_ids[] = {
{ USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */
.driver_info = NO_UNION_NORMAL,
},
{ USB_DEVICE(0x05f9, 0x4002), /* PSC Scanning, Magellan 800i */
.driver_info = NO_UNION_NORMAL,
},
{ USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
},

120
drivers/usb/core/hub.c
View File

@ -877,6 +877,60 @@ static int hub_hub_status(struct usb_hub *hub,
return ret;
}
static int hub_set_port_link_state(struct usb_hub *hub, int port1,
unsigned int link_status)
{
return set_port_feature(hub->hdev,
port1 | (link_status << 3),
USB_PORT_FEAT_LINK_STATE);
}
/*
* If USB 3.0 ports are placed into the Disabled state, they will no longer
* detect any device connects or disconnects. This is generally not what the
* USB core wants, since it expects a disabled port to produce a port status
* change event when a new device connects.
*
* Instead, set the link state to Disabled, wait for the link to settle into
* that state, clear any change bits, and then put the port into the RxDetect
* state.
*/
static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
{
int ret;
int total_time;
u16 portchange, portstatus;
if (!hub_is_superspeed(hub->hdev))
return -EINVAL;
ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
if (ret) {
dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
port1, ret);
return ret;
}
/* Wait for the link to enter the disabled state. */
for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
ret = hub_port_status(hub, port1, &portstatus, &portchange);
if (ret < 0)
return ret;
if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
USB_SS_PORT_LS_SS_DISABLED)
break;
if (total_time >= HUB_DEBOUNCE_TIMEOUT)
break;
msleep(HUB_DEBOUNCE_STEP);
}
if (total_time >= HUB_DEBOUNCE_TIMEOUT)
dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n",
port1, total_time);
return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
}
static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
{
struct usb_device *hdev = hub->hdev;
@ -885,8 +939,13 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
if (hub->ports[port1 - 1]->child && set_state)
usb_set_device_state(hub->ports[port1 - 1]->child,
USB_STATE_NOTATTACHED);
if (!hub->error && !hub_is_superspeed(hub->hdev))
ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
if (!hub->error) {
if (hub_is_superspeed(hub->hdev))
ret = hub_usb3_port_disable(hub, port1);
else
ret = clear_port_feature(hdev, port1,
USB_PORT_FEAT_ENABLE);
}
if (ret)
dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
port1, ret);
@ -2440,7 +2499,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
#define HUB_SHORT_RESET_TIME 10
#define HUB_BH_RESET_TIME 50
#define HUB_LONG_RESET_TIME 200
#define HUB_RESET_TIMEOUT 500
#define HUB_RESET_TIMEOUT 800
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm);
@ -2475,6 +2534,10 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
if (ret < 0)
return ret;
/* The port state is unknown until the reset completes. */
if ((portstatus & USB_PORT_STAT_RESET))
goto delay;
/*
* Some buggy devices require a warm reset to be issued even
* when the port appears not to be connected.
@ -2520,11 +2583,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
if ((portchange & USB_PORT_STAT_C_CONNECTION))
return -ENOTCONN;
/* if we`ve finished resetting, then break out of
* the loop
*/
if (!(portstatus & USB_PORT_STAT_RESET) &&
(portstatus & USB_PORT_STAT_ENABLE)) {
if ((portstatus & USB_PORT_STAT_ENABLE)) {
if (hub_is_wusb(hub))
udev->speed = USB_SPEED_WIRELESS;
else if (hub_is_superspeed(hub->hdev))
@ -2538,10 +2597,15 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
return 0;
}
} else {
if (portchange & USB_PORT_STAT_C_BH_RESET)
return 0;
if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
hub_port_warm_reset_required(hub,
portstatus))
return -ENOTCONN;
return 0;
}
delay:
/* switch to the long delay after two short delay failures */
if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
delay = HUB_LONG_RESET_TIME;
@ -2565,14 +2629,11 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1,
msleep(10 + 40);
update_devnum(udev, 0);
hcd = bus_to_hcd(udev->bus);
if (hcd->driver->reset_device) {
*status = hcd->driver->reset_device(hcd, udev);
if (*status < 0) {
dev_err(&udev->dev, "Cannot reset "
"HCD device state\n");
break;
}
}
/* The xHC may think the device is already reset,
* so ignore the status.
*/
if (hcd->driver->reset_device)
hcd->driver->reset_device(hcd, udev);
}
/* FALL THROUGH */
case -ENOTCONN:
@ -2580,16 +2641,16 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1,
clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_C_RESET);
/* FIXME need disconnect() for NOTATTACHED device */
if (warm) {
if (hub_is_superspeed(hub->hdev)) {
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_BH_PORT_RESET);
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_PORT_LINK_STATE);
} else {
}
if (!warm)
usb_set_device_state(udev, *status
? USB_STATE_NOTATTACHED
: USB_STATE_DEFAULT);
}
break;
}
}
@ -2939,7 +3000,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
static int finish_port_resume(struct usb_device *udev)
{
int status = 0;
u16 devstatus;
u16 devstatus = 0;
/* caller owns the udev device lock */
dev_dbg(&udev->dev, "%s\n",
@ -2984,7 +3045,13 @@ static int finish_port_resume(struct usb_device *udev)
if (status) {
dev_dbg(&udev->dev, "gone after usb resume? status %d\n",
status);
} else if (udev->actconfig) {
/*
* There are a few quirky devices which violate the standard
* by claiming to have remote wakeup enabled after a reset,
* which crash if the feature is cleared, hence check for
* udev->reset_resume
*/
} else if (udev->actconfig && !udev->reset_resume) {
le16_to_cpus(&devstatus);
if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
status = usb_control_msg(udev,
@ -4638,9 +4705,14 @@ static void hub_events(void)
* SS.Inactive state.
*/
if (hub_port_warm_reset_required(hub, portstatus)) {
int status;
dev_dbg(hub_dev, "warm reset port %d\n", i);
hub_port_reset(hub, i, NULL,
status = hub_port_reset(hub, i, NULL,
HUB_BH_RESET_TIME, true);
if (status < 0)
hub_port_disable(hub, i, 1);
connect_change = 0;
}
if (connect_change)

3
drivers/usb/core/quirks.c
View File

@ -43,6 +43,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Quickcam Fusion */
{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },

2
drivers/usb/dwc3/debugfs.c
View File

@ -56,7 +56,7 @@
#define dump_register(nm) \
{ \
.name = __stringify(nm), \
.offset = DWC3_ ##nm, \
.offset = DWC3_ ##nm - DWC3_GLOBALS_REGS_START, \
}
static const struct debugfs_reg32 dwc3_regs[] = {

4
drivers/usb/gadget/amd5536udc.c
View File

@ -3231,7 +3231,7 @@ static int udc_pci_probe(
}
if (!pdev->irq) {
dev_err(&dev->pdev->dev, "irq not set\n");
dev_err(&pdev->dev, "irq not set\n");
kfree(dev);
dev = NULL;
retval = -ENODEV;
@ -3250,7 +3250,7 @@ static int udc_pci_probe(
dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq);
dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
kfree(dev);
dev = NULL;
retval = -EBUSY;

9
drivers/usb/gadget/dummy_hcd.c
View File

@ -130,10 +130,7 @@ static const char ep0name[] = "ep0";
static const char *const ep_name[] = {
ep0name, /* everyone has ep0 */
/* act like a net2280: high speed, six configurable endpoints */
"ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f",
/* or like pxa250: fifteen fixed function endpoints */
/* act like a pxa250: fifteen fixed function endpoints */
"ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int",
"ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int",
"ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso",
@ -141,6 +138,10 @@ static const char *const ep_name[] = {
/* or like sa1100: two fixed function endpoints */
"ep1out-bulk", "ep2in-bulk",
/* and now some generic EPs so we have enough in multi config */
"ep3out", "ep4in", "ep5out", "ep6out", "ep7in", "ep8out", "ep9in",
"ep10out", "ep11out", "ep12in", "ep13out", "ep14in", "ep15out",
};
#define DUMMY_ENDPOINTS ARRAY_SIZE(ep_name)

4
drivers/usb/gadget/mv_udc_core.c
View File

@ -1012,7 +1012,7 @@ static void udc_clock_enable(struct mv_udc *udc)
unsigned int i;
for (i = 0; i < udc->clknum; i++)
clk_enable(udc->clk[i]);
clk_prepare_enable(udc->clk[i]);
}
static void udc_clock_disable(struct mv_udc *udc)
@ -1020,7 +1020,7 @@ static void udc_clock_disable(struct mv_udc *udc)
unsigned int i;
for (i = 0; i < udc->clknum; i++)
clk_disable(udc->clk[i]);
clk_disable_unprepare(udc->clk[i]);
}
static void udc_stop(struct mv_udc *udc)

5
drivers/usb/gadget/s3c-hsotg.c
View File

@ -3477,12 +3477,11 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
/**
* s3c_hsotg_release - release callback for hsotg device
* @dev: Device to for which release is called
*
* Nothing to do as the resource is allocated using devm_ API.
*/
static void s3c_hsotg_release(struct device *dev)
{
struct s3c_hsotg *hsotg = dev_get_drvdata(dev);
kfree(hsotg);
}
/**

3
drivers/usb/gadget/tcm_usb_gadget.c
View File

@ -1794,9 +1794,10 @@ static int tcm_usbg_drop_nexus(struct usbg_tpg *tpg)
tpg->tpg_nexus = NULL;
kfree(tv_nexus);
ret = 0;
out:
mutex_unlock(&tpg->tpg_mutex);
return 0;
return ret;
}
static ssize_t tcm_usbg_tpg_store_nexus(

2
drivers/usb/gadget/u_serial.c
View File

@ -887,7 +887,7 @@ static void gs_close(struct tty_struct *tty, struct file *file)
pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
port->port_num, tty, file);
wake_up_interruptible(&port->port.close_wait);
wake_up(&port->port.close_wait);
exit:
spin_unlock_irq(&port->port_lock);
}

9
drivers/usb/host/ehci-fsl.c
View File

@ -230,7 +230,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
switch (phy_mode) {
case FSL_USB2_PHY_ULPI:
if (pdata->controller_ver) {
if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
setbits32(non_ehci + FSL_SOC_USB_CTRL,
ULPI_PHY_CLK_SEL);
@ -251,7 +251,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
portsc |= PORT_PTS_PTW;
/* fall through */
case FSL_USB2_PHY_UTMI:
if (pdata->controller_ver) {
if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
@ -267,7 +267,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
break;
}
if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) {
if (pdata->have_sysif_regs && pdata->controller_ver &&
(phy_mode == FSL_USB2_PHY_ULPI)) {
/* check PHY_CLK_VALID to get phy clk valid */
if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) {
@ -278,7 +279,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
if (phy_mode != FSL_USB2_PHY_ULPI)
if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
return 0;

4
drivers/usb/host/ehci-mv.c
View File

@ -43,7 +43,7 @@ static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
unsigned int i;
for (i = 0; i < ehci_mv->clknum; i++)
clk_enable(ehci_mv->clk[i]);
clk_prepare_enable(ehci_mv->clk[i]);
}
static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
@ -51,7 +51,7 @@ static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
unsigned int i;
for (i = 0; i < ehci_mv->clknum; i++)
clk_disable(ehci_mv->clk[i]);
clk_disable_unprepare(ehci_mv->clk[i]);
}
static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)

39
drivers/usb/host/ehci-pci.c
View File

@ -200,6 +200,26 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
break;
}
/* optional debug port, normally in the first BAR */
temp = pci_find_capability(pdev, PCI_CAP_ID_DBG);
if (temp) {
pci_read_config_dword(pdev, temp, &temp);
temp >>= 16;
if (((temp >> 13) & 7) == 1) {
u32 hcs_params = ehci_readl(ehci,
&ehci->caps->hcs_params);
temp &= 0x1fff;
ehci->debug = hcd->regs + temp;
temp = ehci_readl(ehci, &ehci->debug->control);
ehci_info(ehci, "debug port %d%s\n",
HCS_DEBUG_PORT(hcs_params),
(temp & DBGP_ENABLED) ? " IN USE" : "");
if (!(temp & DBGP_ENABLED))
ehci->debug = NULL;
}
}
retval = ehci_setup(hcd);
if (retval)
return retval;
@ -228,25 +248,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
break;
}
/* optional debug port, normally in the first BAR */
temp = pci_find_capability(pdev, 0x0a);
if (temp) {
pci_read_config_dword(pdev, temp, &temp);
temp >>= 16;
if ((temp & (3 << 13)) == (1 << 13)) {
temp &= 0x1fff;
ehci->debug = hcd->regs + temp;
temp = ehci_readl(ehci, &ehci->debug->control);
ehci_info(ehci, "debug port %d%s\n",
HCS_DEBUG_PORT(ehci->hcs_params),
(temp & DBGP_ENABLED)
? " IN USE"
: "");
if (!(temp & DBGP_ENABLED))
ehci->debug = NULL;
}
}
/* at least the Genesys GL880S needs fixup here */
temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
temp &= 0x0f;

3
drivers/usb/host/fsl-mph-dr-of.c
View File

@ -142,6 +142,9 @@ static int usb_get_ver_info(struct device_node *np)
return ver;
}
if (of_device_is_compatible(np, "fsl,mpc5121-usb2-dr"))
return FSL_USB_VER_OLD;
if (of_device_is_compatible(np, "fsl-usb2-mph")) {
if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6"))
ver = FSL_USB_VER_1_6;

1
drivers/usb/host/imx21-hcd.c
View File

@ -58,6 +58,7 @@
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include "imx21-hcd.h"

3
drivers/usb/host/ohci-tmio.c
View File

@ -128,7 +128,8 @@ static void tmio_start_hc(struct platform_device *dev)
tmio_iowrite8(2, tmio->ccr + CCR_INTC);
dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n",
tmio_ioread8(tmio->ccr + CCR_REVID), hcd->rsrc_start, hcd->irq);
tmio_ioread8(tmio->ccr + CCR_REVID),
(u64) hcd->rsrc_start, hcd->irq);
}
static int ohci_tmio_start(struct usb_hcd *hcd)

38
drivers/usb/host/xhci-hub.c
View File

@ -761,12 +761,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
break;
case USB_PORT_FEAT_LINK_STATE:
temp = xhci_readl(xhci, port_array[wIndex]);
/* Disable port */
if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
xhci_dbg(xhci, "Disable port %d\n", wIndex);
temp = xhci_port_state_to_neutral(temp);
/*
* Clear all change bits, so that we get a new
* connection event.
*/
temp |= PORT_CSC | PORT_PEC | PORT_WRC |
PORT_OCC | PORT_RC | PORT_PLC |
PORT_CEC;
xhci_writel(xhci, temp | PORT_PE,
port_array[wIndex]);
temp = xhci_readl(xhci, port_array[wIndex]);
break;
}
/* Put link in RxDetect (enable port) */
if (link_state == USB_SS_PORT_LS_RX_DETECT) {
xhci_dbg(xhci, "Enable port %d\n", wIndex);
xhci_set_link_state(xhci, port_array, wIndex,
link_state);
temp = xhci_readl(xhci, port_array[wIndex]);
break;
}
/* Software should not attempt to set
* port link state above '5' (Rx.Detect) and the port
* port link state above '3' (U3) and the port
* must be enabled.
*/
if ((temp & PORT_PE) == 0 ||
(link_state > USB_SS_PORT_LS_RX_DETECT)) {
(link_state > USB_SS_PORT_LS_U3)) {
xhci_warn(xhci, "Cannot set link state.\n");
goto error;
}
@ -957,6 +984,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
int max_ports;
__le32 __iomem **port_array;
struct xhci_bus_state *bus_state;
bool reset_change = false;
max_ports = xhci_get_ports(hcd, &port_array);
bus_state = &xhci->bus_state[hcd_index(hcd)];
@ -988,6 +1016,12 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
status = 1;
}
if ((temp & PORT_RC))
reset_change = true;
}
if (!status && !reset_change) {
xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
}
spin_unlock_irqrestore(&xhci->lock, flags);
return status ? retval : 0;

2
drivers/usb/host/xhci-mem.c
View File

@ -1250,6 +1250,8 @@ static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
if (ep->desc.bInterval == 0)
return 0;
return xhci_microframes_to_exponent(udev, ep,
ep->desc.bInterval, 0, 15);
}

9
drivers/usb/host/xhci-ring.c
View File

@ -1725,6 +1725,15 @@ cleanup:
if (bogus_port_status)
return;
/*
* xHCI port-status-change events occur when the "or" of all the
* status-change bits in the portsc register changes from 0 to 1.
* New status changes won't cause an event if any other change
* bits are still set. When an event occurs, switch over to
* polling to avoid losing status changes.
*/
xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
spin_unlock(&xhci->lock);
/* Pass this up to the core */
usb_hcd_poll_rh_status(hcd);

10
drivers/usb/host/xhci.c
View File

@ -884,6 +884,11 @@ int xhci_suspend(struct xhci_hcd *xhci)
xhci->shared_hcd->state != HC_STATE_SUSPENDED)
return -EINVAL;
/* Don't poll the roothubs on bus suspend. */
xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
del_timer_sync(&hcd->rh_timer);
spin_lock_irq(&xhci->lock);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
@ -1069,6 +1074,11 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
compliance_mode_recovery_timer_init(xhci);
/* Re-enable port polling. */
xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
usb_hcd_poll_rh_status(hcd);
return retval;
}
#endif /* CONFIG_PM */

2
drivers/usb/misc/usbtest.c
View File

@ -2179,7 +2179,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
if (dev->out_pipe == 0 || !param->length || param->sglen < 4)
break;
retval = 0;
dev_info(&intf->dev, "TEST 17: unlink from %d queues of "
dev_info(&intf->dev, "TEST 24: unlink from %d queues of "
"%d %d-byte writes\n",
param->iterations, param->sglen, param->length);
for (i = param->iterations; retval == 0 && i > 0; --i) {

5
drivers/usb/musb/musb_core.c
View File

@ -2298,10 +2298,7 @@ static int __init musb_init(void)
if (usb_disabled())
return 0;
pr_info("%s: version " MUSB_VERSION ", "
"?dma?"
", "
"otg (peripheral+host)",
pr_info("%s: version " MUSB_VERSION ", ?dma?, otg (peripheral+host)\n",
musb_driver_name);
return platform_driver_register(&musb_driver);
}

5
drivers/usb/musb/musb_dsps.c
View File

@ -134,6 +134,11 @@ static const resource_size_t dsps_control_module_phys[] = {
DSPS_AM33XX_CONTROL_MODULE_PHYS_1,
};
#define USBPHY_CM_PWRDN (1 << 0)
#define USBPHY_OTG_PWRDN (1 << 1)
#define USBPHY_OTGVDET_EN (1 << 19)
#define USBPHY_OTGSESSEND_EN (1 << 20)
/**
* musb_dsps_phy_control - phy on/off
* @glue: struct dsps_glue *

2
drivers/usb/otg/Kconfig
View File

@ -110,7 +110,7 @@ config AB8500_USB
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND
depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
select USB_OTG
select USB_OTG_UTILS
help

4
drivers/usb/otg/mv_otg.c
View File

@ -240,7 +240,7 @@ static void otg_clock_enable(struct mv_otg *mvotg)
unsigned int i;
for (i = 0; i < mvotg->clknum; i++)
clk_enable(mvotg->clk[i]);
clk_prepare_enable(mvotg->clk[i]);
}
static void otg_clock_disable(struct mv_otg *mvotg)
@ -248,7 +248,7 @@ static void otg_clock_disable(struct mv_otg *mvotg)
unsigned int i;
for (i = 0; i < mvotg->clknum; i++)
clk_disable(mvotg->clk[i]);
clk_disable_unprepare(mvotg->clk[i]);
}
static int mv_otg_enable_internal(struct mv_otg *mvotg)

22
drivers/usb/renesas_usbhs/mod_gadget.c
View File

@ -545,15 +545,6 @@ static int usbhsg_pipe_disable(struct usbhsg_uep *uep)
return 0;
}
static void usbhsg_uep_init(struct usbhsg_gpriv *gpriv)
{
int i;
struct usbhsg_uep *uep;
usbhsg_for_each_uep_with_dcp(uep, gpriv, i)
uep->pipe = NULL;
}
/*
*
* usb_ep_ops
@ -610,7 +601,12 @@ static int usbhsg_ep_disable(struct usb_ep *ep)
{
struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
return usbhsg_pipe_disable(uep);
usbhsg_pipe_disable(uep);
uep->pipe->mod_private = NULL;
uep->pipe = NULL;
return 0;
}
static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep,
@ -761,9 +757,8 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
usbhs_pipe_init(priv,
usbhsg_dma_map_ctrl);
usbhs_fifo_init(priv);
usbhsg_uep_init(gpriv);
/* dcp init */
/* dcp init instead of usbhsg_ep_enable() */
dcp->pipe = usbhs_dcp_malloc(priv);
dcp->pipe->mod_private = dcp;
usbhs_pipe_config_update(dcp->pipe, 0, 0, 64);
@ -825,7 +820,7 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status)
usbhs_sys_set_test_mode(priv, 0);
usbhs_sys_function_ctrl(priv, 0);
usbhsg_pipe_disable(dcp);
usbhsg_ep_disable(&dcp->ep);
dev_dbg(dev, "stop gadget\n");
@ -998,6 +993,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
*/
usbhsg_for_each_uep_with_dcp(uep, gpriv, i) {
uep->gpriv = gpriv;
uep->pipe = NULL;
snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i);
uep->ep.name = uep->ep_name;

3
drivers/usb/renesas_usbhs/mod_host.c
View File

@ -661,9 +661,10 @@ static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
status = -ESHUTDOWN;
urb->actual_length = pkt->actual;
usbhsh_ureq_free(hpriv, ureq);
usbhsh_endpoint_sequence_save(hpriv, urb, pkt);
usbhsh_ureq_free(hpriv, ureq);
usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep));
usb_hcd_unlink_urb_from_ep(hcd, urb);

2
drivers/usb/serial/ftdi_sio.c
View File

@ -875,6 +875,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
/* Crucible Devices */
{ USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};

6
drivers/usb/serial/ftdi_sio_ids.h
View File

@ -1259,3 +1259,9 @@
* ATI command output: Cinterion MC55i
*/
#define FTDI_CINTERION_MC55I_PID 0xA951
/*
* Product: Comet Caller ID decoder
* Manufacturer: Crucible Technologies
*/
#define FTDI_CT_COMET_PID 0x8e08

18
drivers/usb/serial/option.c
View File

@ -288,6 +288,7 @@ static void option_instat_callback(struct urb *urb);
#define ALCATEL_VENDOR_ID 0x1bbb
#define ALCATEL_PRODUCT_X060S_X200 0x0000
#define ALCATEL_PRODUCT_X220_X500D 0x0017
#define ALCATEL_PRODUCT_L100V 0x011e
#define PIRELLI_VENDOR_ID 0x1266
#define PIRELLI_PRODUCT_C100_1 0x1002
@ -429,9 +430,12 @@ static void option_instat_callback(struct urb *urb);
#define MEDIATEK_VENDOR_ID 0x0e8d
#define MEDIATEK_PRODUCT_DC_1COM 0x00a0
#define MEDIATEK_PRODUCT_DC_4COM 0x00a5
#define MEDIATEK_PRODUCT_DC_4COM2 0x00a7
#define MEDIATEK_PRODUCT_DC_5COM 0x00a4
#define MEDIATEK_PRODUCT_7208_1COM 0x7101
#define MEDIATEK_PRODUCT_7208_2COM 0x7102
#define MEDIATEK_PRODUCT_7103_2COM 0x7103
#define MEDIATEK_PRODUCT_7106_2COM 0x7106
#define MEDIATEK_PRODUCT_FP_1COM 0x0003
#define MEDIATEK_PRODUCT_FP_2COM 0x0023
#define MEDIATEK_PRODUCT_FPDC_1COM 0x0043
@ -441,6 +445,10 @@ static void option_instat_callback(struct urb *urb);
#define CELLIENT_VENDOR_ID 0x2692
#define CELLIENT_PRODUCT_MEN200 0x9005
/* Hyundai Petatel Inc. products */
#define PETATEL_VENDOR_ID 0x1ff4
#define PETATEL_PRODUCT_NP10T 0x600e
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
@ -923,7 +931,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
@ -1190,6 +1199,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
},
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
@ -1294,7 +1305,12 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7103_2COM, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7106_2COM, 0x02, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);