sh: machvec IO death.
This takes a bit of a sledgehammer to the machvec I/O routines. The iomem case requires no special casing and so can just be dropped outright. This only leaves the ioport casing for PCI and SuperIO mangling. With the SuperIO case going through the standard ioport mapping, it's possible to replace everything with generic routines. With this done the standard I/O routines are tidied up and NO_IOPORT now gets default-enabled for the vast majority of boards. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Paul Mundt
parent
e2781ac2a6
commit
37b7a97884
|
|
@ -161,7 +161,8 @@ config ARCH_HAS_CPU_IDLE_WAIT
|
|||
def_bool y
|
||||
|
||||
config NO_IOPORT
|
||||
bool
|
||||
def_bool !PCI
|
||||
depends on !SH_CAYMAN && !SH_SH4202_MICRODEV
|
||||
|
||||
config IO_TRAPPED
|
||||
bool
|
||||
|
|
|
|||
|
|
@ -29,8 +29,6 @@ unsigned short secureedge5410_ioport;
|
|||
*/
|
||||
static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
ctrl_delay(); /* dummy read */
|
||||
|
||||
printk("SnapGear: erase switch interrupt!\n");
|
||||
|
||||
return IRQ_HANDLED;
|
||||
|
|
|
|||
|
|
@ -382,14 +382,13 @@ static void __iomem *ioport_map_pci(struct pci_dev *dev,
|
|||
struct pci_channel *chan = dev->sysdata;
|
||||
|
||||
if (unlikely(!chan->io_map_base)) {
|
||||
chan->io_map_base = generic_io_base;
|
||||
chan->io_map_base = sh_io_port_base;
|
||||
|
||||
if (pci_domains_supported)
|
||||
panic("To avoid data corruption io_map_base MUST be "
|
||||
"set with multiple PCI domains.");
|
||||
}
|
||||
|
||||
|
||||
return (void __iomem *)(chan->io_map_base + port);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -1,5 +1,6 @@
|
|||
#ifndef __ASM_SH_IO_H
|
||||
#define __ASM_SH_IO_H
|
||||
|
||||
/*
|
||||
* Convention:
|
||||
* read{b,w,l,q}/write{b,w,l,q} are for PCI,
|
||||
|
|
@ -15,12 +16,6 @@
|
|||
* SuperH specific I/O (raw I/O to on-chip CPU peripherals). In practice
|
||||
* these have the same semantics as the __raw variants, and as such, all
|
||||
* new code should be using the __raw versions.
|
||||
*
|
||||
* All ISA I/O routines are wrapped through the machine vector. If a
|
||||
* board does not provide overrides, a generic set that are copied in
|
||||
* from the default machine vector are used instead. These are largely
|
||||
* for old compat code for I/O offseting to SuperIOs, all of which are
|
||||
* better handled through the machvec ioport mapping routines these days.
|
||||
*/
|
||||
#include <linux/errno.h>
|
||||
#include <asm/cache.h>
|
||||
|
|
@ -31,39 +26,10 @@
|
|||
#include <asm-generic/iomap.h>
|
||||
|
||||
#ifdef __KERNEL__
|
||||
/*
|
||||
* Depending on which platform we are running on, we need different
|
||||
* I/O functions.
|
||||
*/
|
||||
#define __IO_PREFIX generic
|
||||
#define __IO_PREFIX generic
|
||||
#include <asm/io_generic.h>
|
||||
#include <asm/io_trapped.h>
|
||||
|
||||
#ifdef CONFIG_HAS_IOPORT
|
||||
|
||||
#define inb(p) sh_mv.mv_inb((p))
|
||||
#define inw(p) sh_mv.mv_inw((p))
|
||||
#define inl(p) sh_mv.mv_inl((p))
|
||||
#define outb(x,p) sh_mv.mv_outb((x),(p))
|
||||
#define outw(x,p) sh_mv.mv_outw((x),(p))
|
||||
#define outl(x,p) sh_mv.mv_outl((x),(p))
|
||||
|
||||
#define inb_p(p) sh_mv.mv_inb_p((p))
|
||||
#define inw_p(p) sh_mv.mv_inw_p((p))
|
||||
#define inl_p(p) sh_mv.mv_inl_p((p))
|
||||
#define outb_p(x,p) sh_mv.mv_outb_p((x),(p))
|
||||
#define outw_p(x,p) sh_mv.mv_outw_p((x),(p))
|
||||
#define outl_p(x,p) sh_mv.mv_outl_p((x),(p))
|
||||
|
||||
#define insb(p,b,c) sh_mv.mv_insb((p), (b), (c))
|
||||
#define insw(p,b,c) sh_mv.mv_insw((p), (b), (c))
|
||||
#define insl(p,b,c) sh_mv.mv_insl((p), (b), (c))
|
||||
#define outsb(p,b,c) sh_mv.mv_outsb((p), (b), (c))
|
||||
#define outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c))
|
||||
#define outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c))
|
||||
|
||||
#endif
|
||||
|
||||
#define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile u8 __force *)(a) = (v))
|
||||
#define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
|
||||
#define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
|
||||
|
|
@ -74,15 +40,196 @@
|
|||
#define __raw_readl(a) (__chk_io_ptr(a), *(volatile u32 __force *)(a))
|
||||
#define __raw_readq(a) (__chk_io_ptr(a), *(volatile u64 __force *)(a))
|
||||
|
||||
#define readb(a) ({ u8 r_ = __raw_readb(a); mb(); r_; })
|
||||
#define readw(a) ({ u16 r_ = __raw_readw(a); mb(); r_; })
|
||||
#define readl(a) ({ u32 r_ = __raw_readl(a); mb(); r_; })
|
||||
#define readq(a) ({ u64 r_ = __raw_readq(a); mb(); r_; })
|
||||
#define readb_relaxed(c) ({ u8 __v = __raw_readb(c); __v; })
|
||||
#define readw_relaxed(c) ({ u16 __v = le16_to_cpu((__force __le16) \
|
||||
__raw_readw(c)); __v; })
|
||||
#define readl_relaxed(c) ({ u32 __v = le32_to_cpu((__force __le32) \
|
||||
__raw_readl(c)); __v; })
|
||||
#define readq_relaxed(c) ({ u64 __v = le64_to_cpu((__force __le64) \
|
||||
__raw_readq(c)); __v; })
|
||||
|
||||
#define writeb(v,a) ({ __raw_writeb((v),(a)); mb(); })
|
||||
#define writew(v,a) ({ __raw_writew((v),(a)); mb(); })
|
||||
#define writel(v,a) ({ __raw_writel((v),(a)); mb(); })
|
||||
#define writeq(v,a) ({ __raw_writeq((v),(a)); mb(); })
|
||||
#define writeb_relaxed(v,c) ((void)__raw_writeb(v,c))
|
||||
#define writew_relaxed(v,c) ((void)__raw_writew((__force u16) \
|
||||
cpu_to_le16(v),c))
|
||||
#define writel_relaxed(v,c) ((void)__raw_writel((__force u32) \
|
||||
cpu_to_le32(v),c))
|
||||
#define writeq_relaxed(v,c) ((void)__raw_writeq((__force u64) \
|
||||
cpu_to_le64(v),c))
|
||||
|
||||
#define readb(a) ({ u8 r_ = readb_relaxed(a); rmb(); r_; })
|
||||
#define readw(a) ({ u16 r_ = readw_relaxed(a); rmb(); r_; })
|
||||
#define readl(a) ({ u32 r_ = readl_relaxed(a); rmb(); r_; })
|
||||
#define readq(a) ({ u64 r_ = readq_relaxed(a); rmb(); r_; })
|
||||
|
||||
#define writeb(v,a) ({ wmb(); writeb_relaxed((v),(a)); })
|
||||
#define writew(v,a) ({ wmb(); writew_relaxed((v),(a)); })
|
||||
#define writel(v,a) ({ wmb(); writel_relaxed((v),(a)); })
|
||||
#define writeq(v,a) ({ wmb(); writeq_relaxed((v),(a)); })
|
||||
|
||||
#define readsb(p,d,l) __raw_readsb(p,d,l)
|
||||
#define readsw(p,d,l) __raw_readsw(p,d,l)
|
||||
#define readsl(p,d,l) __raw_readsl(p,d,l)
|
||||
|
||||
#define writesb(p,d,l) __raw_writesb(p,d,l)
|
||||
#define writesw(p,d,l) __raw_writesw(p,d,l)
|
||||
#define writesl(p,d,l) __raw_writesl(p,d,l)
|
||||
|
||||
#define __BUILD_UNCACHED_IO(bwlq, type) \
|
||||
static inline type read##bwlq##_uncached(unsigned long addr) \
|
||||
{ \
|
||||
type ret; \
|
||||
jump_to_uncached(); \
|
||||
ret = __raw_read##bwlq(addr); \
|
||||
back_to_cached(); \
|
||||
return ret; \
|
||||
} \
|
||||
\
|
||||
static inline void write##bwlq##_uncached(type v, unsigned long addr) \
|
||||
{ \
|
||||
jump_to_uncached(); \
|
||||
__raw_write##bwlq(v, addr); \
|
||||
back_to_cached(); \
|
||||
}
|
||||
|
||||
__BUILD_UNCACHED_IO(b, u8)
|
||||
__BUILD_UNCACHED_IO(w, u16)
|
||||
__BUILD_UNCACHED_IO(l, u32)
|
||||
__BUILD_UNCACHED_IO(q, u64)
|
||||
|
||||
#define __BUILD_MEMORY_STRING(pfx, bwlq, type) \
|
||||
\
|
||||
static inline void \
|
||||
pfx##writes##bwlq(volatile void __iomem *mem, const void *addr, \
|
||||
unsigned int count) \
|
||||
{ \
|
||||
const volatile type *__addr = addr; \
|
||||
\
|
||||
while (count--) { \
|
||||
__raw_write##bwlq(*__addr, mem); \
|
||||
__addr++; \
|
||||
} \
|
||||
} \
|
||||
\
|
||||
static inline void pfx##reads##bwlq(volatile void __iomem *mem, \
|
||||
void *addr, unsigned int count) \
|
||||
{ \
|
||||
volatile type *__addr = addr; \
|
||||
\
|
||||
while (count--) { \
|
||||
*__addr = __raw_read##bwlq(mem); \
|
||||
__addr++; \
|
||||
} \
|
||||
}
|
||||
|
||||
__BUILD_MEMORY_STRING(__raw_, b, u8)
|
||||
__BUILD_MEMORY_STRING(__raw_, w, u16)
|
||||
|
||||
#ifdef CONFIG_SUPERH32
|
||||
void __raw_writesl(void __iomem *addr, const void *data, int longlen);
|
||||
void __raw_readsl(const void __iomem *addr, void *data, int longlen);
|
||||
#else
|
||||
__BUILD_MEMORY_STRING(__raw_, l, u32)
|
||||
#endif
|
||||
|
||||
__BUILD_MEMORY_STRING(__raw_, q, u64)
|
||||
|
||||
#ifdef CONFIG_HAS_IOPORT
|
||||
|
||||
/*
|
||||
* Slowdown I/O port space accesses for antique hardware.
|
||||
*/
|
||||
#undef CONF_SLOWDOWN_IO
|
||||
|
||||
/*
|
||||
* On SuperH I/O ports are memory mapped, so we access them using normal
|
||||
* load/store instructions. sh_io_port_base is the virtual address to
|
||||
* which all ports are being mapped.
|
||||
*/
|
||||
extern const unsigned long sh_io_port_base;
|
||||
|
||||
static inline void __set_io_port_base(unsigned long pbase)
|
||||
{
|
||||
*(unsigned long *)&sh_io_port_base = pbase;
|
||||
barrier();
|
||||
}
|
||||
|
||||
#ifdef CONFIG_GENERIC_IOMAP
|
||||
#define __ioport_map ioport_map
|
||||
#else
|
||||
extern void __iomem *__ioport_map(unsigned long addr, unsigned int size);
|
||||
#endif
|
||||
|
||||
#ifdef CONF_SLOWDOWN_IO
|
||||
#define SLOW_DOWN_IO __raw_readw(sh_io_port_base)
|
||||
#else
|
||||
#define SLOW_DOWN_IO
|
||||
#endif
|
||||
|
||||
#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \
|
||||
\
|
||||
static inline void pfx##out##bwlq##p(type val, unsigned long port) \
|
||||
{ \
|
||||
volatile type *__addr; \
|
||||
\
|
||||
__addr = __ioport_map(port, sizeof(type)); \
|
||||
*__addr = val; \
|
||||
slow; \
|
||||
} \
|
||||
\
|
||||
static inline type pfx##in##bwlq##p(unsigned long port) \
|
||||
{ \
|
||||
volatile type *__addr; \
|
||||
type __val; \
|
||||
\
|
||||
__addr = __ioport_map(port, sizeof(type)); \
|
||||
__val = *__addr; \
|
||||
slow; \
|
||||
\
|
||||
return __val; \
|
||||
}
|
||||
|
||||
#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
|
||||
__BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \
|
||||
__BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
|
||||
|
||||
#define BUILDIO_IOPORT(bwlq, type) \
|
||||
__BUILD_IOPORT_PFX(, bwlq, type)
|
||||
|
||||
BUILDIO_IOPORT(b, u8)
|
||||
BUILDIO_IOPORT(w, u16)
|
||||
BUILDIO_IOPORT(l, u32)
|
||||
BUILDIO_IOPORT(q, u64)
|
||||
|
||||
#define __BUILD_IOPORT_STRING(bwlq, type) \
|
||||
\
|
||||
static inline void outs##bwlq(unsigned long port, const void *addr, \
|
||||
unsigned int count) \
|
||||
{ \
|
||||
const volatile type *__addr = addr; \
|
||||
\
|
||||
while (count--) { \
|
||||
out##bwlq(*__addr, port); \
|
||||
__addr++; \
|
||||
} \
|
||||
} \
|
||||
\
|
||||
static inline void ins##bwlq(unsigned long port, void *addr, \
|
||||
unsigned int count) \
|
||||
{ \
|
||||
volatile type *__addr = addr; \
|
||||
\
|
||||
while (count--) { \
|
||||
*__addr = in##bwlq(port); \
|
||||
__addr++; \
|
||||
} \
|
||||
}
|
||||
|
||||
__BUILD_IOPORT_STRING(b, u8)
|
||||
__BUILD_IOPORT_STRING(w, u16)
|
||||
__BUILD_IOPORT_STRING(l, u32)
|
||||
__BUILD_IOPORT_STRING(q, u64)
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Legacy SuperH on-chip I/O functions
|
||||
|
|
@ -130,139 +277,11 @@ static inline void __deprecated ctrl_outq(u64 v, unsigned long addr)
|
|||
__raw_writeq(v, addr);
|
||||
}
|
||||
|
||||
extern unsigned long generic_io_base;
|
||||
|
||||
static inline void ctrl_delay(void)
|
||||
{
|
||||
__raw_readw(generic_io_base);
|
||||
}
|
||||
|
||||
#define __BUILD_UNCACHED_IO(bwlq, type) \
|
||||
static inline type read##bwlq##_uncached(unsigned long addr) \
|
||||
{ \
|
||||
type ret; \
|
||||
jump_to_uncached(); \
|
||||
ret = __raw_read##bwlq(addr); \
|
||||
back_to_cached(); \
|
||||
return ret; \
|
||||
} \
|
||||
\
|
||||
static inline void write##bwlq##_uncached(type v, unsigned long addr) \
|
||||
{ \
|
||||
jump_to_uncached(); \
|
||||
__raw_write##bwlq(v, addr); \
|
||||
back_to_cached(); \
|
||||
}
|
||||
|
||||
__BUILD_UNCACHED_IO(b, u8)
|
||||
__BUILD_UNCACHED_IO(w, u16)
|
||||
__BUILD_UNCACHED_IO(l, u32)
|
||||
__BUILD_UNCACHED_IO(q, u64)
|
||||
|
||||
#define __BUILD_MEMORY_STRING(bwlq, type) \
|
||||
\
|
||||
static inline void __raw_writes##bwlq(volatile void __iomem *mem, \
|
||||
const void *addr, unsigned int count) \
|
||||
{ \
|
||||
const volatile type *__addr = addr; \
|
||||
\
|
||||
while (count--) { \
|
||||
__raw_write##bwlq(*__addr, mem); \
|
||||
__addr++; \
|
||||
} \
|
||||
} \
|
||||
\
|
||||
static inline void __raw_reads##bwlq(volatile void __iomem *mem, \
|
||||
void *addr, unsigned int count) \
|
||||
{ \
|
||||
volatile type *__addr = addr; \
|
||||
\
|
||||
while (count--) { \
|
||||
*__addr = __raw_read##bwlq(mem); \
|
||||
__addr++; \
|
||||
} \
|
||||
}
|
||||
|
||||
__BUILD_MEMORY_STRING(b, u8)
|
||||
__BUILD_MEMORY_STRING(w, u16)
|
||||
|
||||
#ifdef CONFIG_SUPERH32
|
||||
void __raw_writesl(void __iomem *addr, const void *data, int longlen);
|
||||
void __raw_readsl(const void __iomem *addr, void *data, int longlen);
|
||||
#else
|
||||
__BUILD_MEMORY_STRING(l, u32)
|
||||
#endif
|
||||
|
||||
__BUILD_MEMORY_STRING(q, u64)
|
||||
|
||||
#define writesb __raw_writesb
|
||||
#define writesw __raw_writesw
|
||||
#define writesl __raw_writesl
|
||||
|
||||
#define readsb __raw_readsb
|
||||
#define readsw __raw_readsw
|
||||
#define readsl __raw_readsl
|
||||
|
||||
#define readb_relaxed(a) readb(a)
|
||||
#define readw_relaxed(a) readw(a)
|
||||
#define readl_relaxed(a) readl(a)
|
||||
#define readq_relaxed(a) readq(a)
|
||||
|
||||
#ifndef CONFIG_GENERIC_IOMAP
|
||||
/* Simple MMIO */
|
||||
#define ioread8(a) __raw_readb(a)
|
||||
#define ioread16(a) __raw_readw(a)
|
||||
#define ioread16be(a) be16_to_cpu(__raw_readw((a)))
|
||||
#define ioread32(a) __raw_readl(a)
|
||||
#define ioread32be(a) be32_to_cpu(__raw_readl((a)))
|
||||
|
||||
#define iowrite8(v,a) __raw_writeb((v),(a))
|
||||
#define iowrite16(v,a) __raw_writew((v),(a))
|
||||
#define iowrite16be(v,a) __raw_writew(cpu_to_be16((v)),(a))
|
||||
#define iowrite32(v,a) __raw_writel((v),(a))
|
||||
#define iowrite32be(v,a) __raw_writel(cpu_to_be32((v)),(a))
|
||||
|
||||
#define ioread8_rep(a, d, c) __raw_readsb((a), (d), (c))
|
||||
#define ioread16_rep(a, d, c) __raw_readsw((a), (d), (c))
|
||||
#define ioread32_rep(a, d, c) __raw_readsl((a), (d), (c))
|
||||
|
||||
#define iowrite8_rep(a, s, c) __raw_writesb((a), (s), (c))
|
||||
#define iowrite16_rep(a, s, c) __raw_writesw((a), (s), (c))
|
||||
#define iowrite32_rep(a, s, c) __raw_writesl((a), (s), (c))
|
||||
#endif
|
||||
|
||||
#define mmio_insb(p,d,c) __raw_readsb(p,d,c)
|
||||
#define mmio_insw(p,d,c) __raw_readsw(p,d,c)
|
||||
#define mmio_insl(p,d,c) __raw_readsl(p,d,c)
|
||||
|
||||
#define mmio_outsb(p,s,c) __raw_writesb(p,s,c)
|
||||
#define mmio_outsw(p,s,c) __raw_writesw(p,s,c)
|
||||
#define mmio_outsl(p,s,c) __raw_writesl(p,s,c)
|
||||
#define IO_SPACE_LIMIT 0xffffffff
|
||||
|
||||
/* synco on SH-4A, otherwise a nop */
|
||||
#define mmiowb() wmb()
|
||||
|
||||
#define IO_SPACE_LIMIT 0xffffffff
|
||||
|
||||
#ifdef CONFIG_HAS_IOPORT
|
||||
|
||||
/*
|
||||
* This function provides a method for the generic case where a
|
||||
* board-specific ioport_map simply needs to return the port + some
|
||||
* arbitrary port base.
|
||||
*
|
||||
* We use this at board setup time to implicitly set the port base, and
|
||||
* as a result, we can use the generic ioport_map.
|
||||
*/
|
||||
static inline void __set_io_port_base(unsigned long pbase)
|
||||
{
|
||||
generic_io_base = pbase;
|
||||
}
|
||||
|
||||
#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
|
||||
|
||||
#endif
|
||||
|
||||
/* We really want to try and get these to memcpy etc */
|
||||
void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
|
||||
void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
|
||||
|
|
@ -395,10 +414,6 @@ static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; }
|
|||
#define ioremap_nocache ioremap
|
||||
#define iounmap __iounmap
|
||||
|
||||
#define maybebadio(port) \
|
||||
printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
|
||||
__func__, __LINE__, (port), (u32)__builtin_return_address(0))
|
||||
|
||||
/*
|
||||
* Convert a physical pointer to a virtual kernel pointer for /dev/mem
|
||||
* access
|
||||
|
|
|
|||
|
|
@ -11,31 +11,6 @@
|
|||
#error "Don't include this header without a valid system prefix"
|
||||
#endif
|
||||
|
||||
u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long);
|
||||
u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long);
|
||||
u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long);
|
||||
|
||||
void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long);
|
||||
void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long);
|
||||
void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long);
|
||||
|
||||
u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long);
|
||||
u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long);
|
||||
u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long);
|
||||
void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long);
|
||||
void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long);
|
||||
void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long);
|
||||
|
||||
void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count);
|
||||
void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count);
|
||||
void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count);
|
||||
void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count);
|
||||
void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count);
|
||||
void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count);
|
||||
|
||||
void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size);
|
||||
void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr);
|
||||
|
||||
void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size);
|
||||
void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr);
|
||||
void IO_CONCAT(__IO_PREFIX,mem_init)(void);
|
||||
|
|
|
|||
|
|
@ -23,27 +23,6 @@ struct sh_machine_vector {
|
|||
void (*mv_init_irq)(void);
|
||||
|
||||
#ifdef CONFIG_HAS_IOPORT
|
||||
u8 (*mv_inb)(unsigned long);
|
||||
u16 (*mv_inw)(unsigned long);
|
||||
u32 (*mv_inl)(unsigned long);
|
||||
void (*mv_outb)(u8, unsigned long);
|
||||
void (*mv_outw)(u16, unsigned long);
|
||||
void (*mv_outl)(u32, unsigned long);
|
||||
|
||||
u8 (*mv_inb_p)(unsigned long);
|
||||
u16 (*mv_inw_p)(unsigned long);
|
||||
u32 (*mv_inl_p)(unsigned long);
|
||||
void (*mv_outb_p)(u8, unsigned long);
|
||||
void (*mv_outw_p)(u16, unsigned long);
|
||||
void (*mv_outl_p)(u32, unsigned long);
|
||||
|
||||
void (*mv_insb)(unsigned long, void *dst, unsigned long count);
|
||||
void (*mv_insw)(unsigned long, void *dst, unsigned long count);
|
||||
void (*mv_insl)(unsigned long, void *dst, unsigned long count);
|
||||
void (*mv_outsb)(unsigned long, const void *src, unsigned long count);
|
||||
void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
|
||||
void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
|
||||
|
||||
void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
|
||||
void (*mv_ioport_unmap)(void __iomem *);
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -20,6 +20,11 @@ obj-y := clkdev.o debugtraps.o dma-nommu.o dumpstack.o \
|
|||
syscalls_$(BITS).o time.o topology.o traps.o \
|
||||
traps_$(BITS).o unwinder.o
|
||||
|
||||
ifndef CONFIG_GENERIC_IOMAP
|
||||
obj-y += iomap.o
|
||||
obj-$(CONFIG_HAS_IOPORT) += ioport.o
|
||||
endif
|
||||
|
||||
obj-y += cpu/
|
||||
obj-$(CONFIG_VSYSCALL) += vsyscall/
|
||||
obj-$(CONFIG_SMP) += smp.o
|
||||
|
|
@ -39,7 +44,6 @@ obj-$(CONFIG_DUMP_CODE) += disassemble.o
|
|||
obj-$(CONFIG_HIBERNATION) += swsusp.o
|
||||
obj-$(CONFIG_DWARF_UNWINDER) += dwarf.o
|
||||
obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_callchain.o
|
||||
obj-$(CONFIG_HAS_IOPORT) += io_generic.o
|
||||
|
||||
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
|
||||
obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o
|
||||
|
|
|
|||
|
|
@ -1,180 +0,0 @@
|
|||
/*
|
||||
* arch/sh/kernel/io_generic.c
|
||||
*
|
||||
* Copyright (C) 2000 Niibe Yutaka
|
||||
* Copyright (C) 2005 - 2007 Paul Mundt
|
||||
*
|
||||
* Generic I/O routine. These can be used where a machine specific version
|
||||
* is not required.
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/io.h>
|
||||
#include <asm/machvec.h>
|
||||
|
||||
#ifdef CONFIG_CPU_SH3
|
||||
/* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a
|
||||
* workaround. */
|
||||
/* I'm not sure SH7709 has this kind of bug */
|
||||
#define dummy_read() __raw_readb(0xba000000)
|
||||
#else
|
||||
#define dummy_read()
|
||||
#endif
|
||||
|
||||
unsigned long generic_io_base = 0;
|
||||
|
||||
u8 generic_inb(unsigned long port)
|
||||
{
|
||||
return __raw_readb(__ioport_map(port, 1));
|
||||
}
|
||||
|
||||
u16 generic_inw(unsigned long port)
|
||||
{
|
||||
return __raw_readw(__ioport_map(port, 2));
|
||||
}
|
||||
|
||||
u32 generic_inl(unsigned long port)
|
||||
{
|
||||
return __raw_readl(__ioport_map(port, 4));
|
||||
}
|
||||
|
||||
u8 generic_inb_p(unsigned long port)
|
||||
{
|
||||
unsigned long v = generic_inb(port);
|
||||
|
||||
ctrl_delay();
|
||||
return v;
|
||||
}
|
||||
|
||||
u16 generic_inw_p(unsigned long port)
|
||||
{
|
||||
unsigned long v = generic_inw(port);
|
||||
|
||||
ctrl_delay();
|
||||
return v;
|
||||
}
|
||||
|
||||
u32 generic_inl_p(unsigned long port)
|
||||
{
|
||||
unsigned long v = generic_inl(port);
|
||||
|
||||
ctrl_delay();
|
||||
return v;
|
||||
}
|
||||
|
||||
/*
|
||||
* insb/w/l all read a series of bytes/words/longs from a fixed port
|
||||
* address. However as the port address doesn't change we only need to
|
||||
* convert the port address to real address once.
|
||||
*/
|
||||
|
||||
void generic_insb(unsigned long port, void *dst, unsigned long count)
|
||||
{
|
||||
__raw_readsb(__ioport_map(port, 1), dst, count);
|
||||
dummy_read();
|
||||
}
|
||||
|
||||
void generic_insw(unsigned long port, void *dst, unsigned long count)
|
||||
{
|
||||
__raw_readsw(__ioport_map(port, 2), dst, count);
|
||||
dummy_read();
|
||||
}
|
||||
|
||||
void generic_insl(unsigned long port, void *dst, unsigned long count)
|
||||
{
|
||||
__raw_readsl(__ioport_map(port, 4), dst, count);
|
||||
dummy_read();
|
||||
}
|
||||
|
||||
void generic_outb(u8 b, unsigned long port)
|
||||
{
|
||||
__raw_writeb(b, __ioport_map(port, 1));
|
||||
}
|
||||
|
||||
void generic_outw(u16 b, unsigned long port)
|
||||
{
|
||||
__raw_writew(b, __ioport_map(port, 2));
|
||||
}
|
||||
|
||||
void generic_outl(u32 b, unsigned long port)
|
||||
{
|
||||
__raw_writel(b, __ioport_map(port, 4));
|
||||
}
|
||||
|
||||
void generic_outb_p(u8 b, unsigned long port)
|
||||
{
|
||||
generic_outb(b, port);
|
||||
ctrl_delay();
|
||||
}
|
||||
|
||||
void generic_outw_p(u16 b, unsigned long port)
|
||||
{
|
||||
generic_outw(b, port);
|
||||
ctrl_delay();
|
||||
}
|
||||
|
||||
void generic_outl_p(u32 b, unsigned long port)
|
||||
{
|
||||
generic_outl(b, port);
|
||||
ctrl_delay();
|
||||
}
|
||||
|
||||
/*
|
||||
* outsb/w/l all write a series of bytes/words/longs to a fixed port
|
||||
* address. However as the port address doesn't change we only need to
|
||||
* convert the port address to real address once.
|
||||
*/
|
||||
void generic_outsb(unsigned long port, const void *src, unsigned long count)
|
||||
{
|
||||
__raw_writesb(__ioport_map(port, 1), src, count);
|
||||
dummy_read();
|
||||
}
|
||||
|
||||
void generic_outsw(unsigned long port, const void *src, unsigned long count)
|
||||
{
|
||||
__raw_writesw(__ioport_map(port, 2), src, count);
|
||||
dummy_read();
|
||||
}
|
||||
|
||||
void generic_outsl(unsigned long port, const void *src, unsigned long count)
|
||||
{
|
||||
__raw_writesl(__ioport_map(port, 4), src, count);
|
||||
dummy_read();
|
||||
}
|
||||
|
||||
void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
|
||||
{
|
||||
#ifdef P1SEG
|
||||
if (PXSEG(addr) >= P1SEG)
|
||||
return (void __iomem *)addr;
|
||||
#endif
|
||||
|
||||
return (void __iomem *)(addr + generic_io_base);
|
||||
}
|
||||
|
||||
void generic_ioport_unmap(void __iomem *addr)
|
||||
{
|
||||
}
|
||||
|
||||
#ifndef CONFIG_GENERIC_IOMAP
|
||||
void __iomem *ioport_map(unsigned long port, unsigned int nr)
|
||||
{
|
||||
void __iomem *ret;
|
||||
|
||||
ret = __ioport_map_trapped(port, nr);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return __ioport_map(port, nr);
|
||||
}
|
||||
EXPORT_SYMBOL(ioport_map);
|
||||
|
||||
void ioport_unmap(void __iomem *addr)
|
||||
{
|
||||
sh_mv.mv_ioport_unmap(addr);
|
||||
}
|
||||
EXPORT_SYMBOL(ioport_unmap);
|
||||
#endif /* CONFIG_GENERIC_IOMAP */
|
||||
|
|
@ -0,0 +1,165 @@
|
|||
/*
|
||||
* arch/sh/kernel/iomap.c
|
||||
*
|
||||
* Copyright (C) 2000 Niibe Yutaka
|
||||
* Copyright (C) 2005 - 2007 Paul Mundt
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
unsigned int ioread8(void __iomem *addr)
|
||||
{
|
||||
return readb(addr);
|
||||
}
|
||||
EXPORT_SYMBOL(ioread8);
|
||||
|
||||
unsigned int ioread16(void __iomem *addr)
|
||||
{
|
||||
return readw(addr);
|
||||
}
|
||||
EXPORT_SYMBOL(ioread16);
|
||||
|
||||
unsigned int ioread16be(void __iomem *addr)
|
||||
{
|
||||
return be16_to_cpu(__raw_readw(addr));
|
||||
}
|
||||
EXPORT_SYMBOL(ioread16be);
|
||||
|
||||
unsigned int ioread32(void __iomem *addr)
|
||||
{
|
||||
return readl(addr);
|
||||
}
|
||||
EXPORT_SYMBOL(ioread32);
|
||||
|
||||
unsigned int ioread32be(void __iomem *addr)
|
||||
{
|
||||
return be32_to_cpu(__raw_readl(addr));
|
||||
}
|
||||
EXPORT_SYMBOL(ioread32be);
|
||||
|
||||
void iowrite8(u8 val, void __iomem *addr)
|
||||
{
|
||||
writeb(val, addr);
|
||||
}
|
||||
EXPORT_SYMBOL(iowrite8);
|
||||
|
||||
void iowrite16(u16 val, void __iomem *addr)
|
||||
{
|
||||
writew(val, addr);
|
||||
}
|
||||
EXPORT_SYMBOL(iowrite16);
|
||||
|
||||
void iowrite16be(u16 val, void __iomem *addr)
|
||||
{
|
||||
__raw_writew(cpu_to_be16(val), addr);
|
||||
}
|
||||
EXPORT_SYMBOL(iowrite16be);
|
||||
|
||||
void iowrite32(u32 val, void __iomem *addr)
|
||||
{
|
||||
writel(val, addr);
|
||||
}
|
||||
EXPORT_SYMBOL(iowrite32);
|
||||
|
||||
void iowrite32be(u32 val, void __iomem *addr)
|
||||
{
|
||||
__raw_writel(cpu_to_be32(val), addr);
|
||||
}
|
||||
EXPORT_SYMBOL(iowrite32be);
|
||||
|
||||
/*
|
||||
* These are the "repeat MMIO read/write" functions.
|
||||
* Note the "__raw" accesses, since we don't want to
|
||||
* convert to CPU byte order. We write in "IO byte
|
||||
* order" (we also don't have IO barriers).
|
||||
*/
|
||||
static inline void mmio_insb(void __iomem *addr, u8 *dst, int count)
|
||||
{
|
||||
while (--count >= 0) {
|
||||
u8 data = __raw_readb(addr);
|
||||
*dst = data;
|
||||
dst++;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void mmio_insw(void __iomem *addr, u16 *dst, int count)
|
||||
{
|
||||
while (--count >= 0) {
|
||||
u16 data = __raw_readw(addr);
|
||||
*dst = data;
|
||||
dst++;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void mmio_insl(void __iomem *addr, u32 *dst, int count)
|
||||
{
|
||||
while (--count >= 0) {
|
||||
u32 data = __raw_readl(addr);
|
||||
*dst = data;
|
||||
dst++;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
|
||||
{
|
||||
while (--count >= 0) {
|
||||
__raw_writeb(*src, addr);
|
||||
src++;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
|
||||
{
|
||||
while (--count >= 0) {
|
||||
__raw_writew(*src, addr);
|
||||
src++;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count)
|
||||
{
|
||||
while (--count >= 0) {
|
||||
__raw_writel(*src, addr);
|
||||
src++;
|
||||
}
|
||||
}
|
||||
|
||||
void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
|
||||
{
|
||||
mmio_insb(addr, dst, count);
|
||||
}
|
||||
EXPORT_SYMBOL(ioread8_rep);
|
||||
|
||||
void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
|
||||
{
|
||||
mmio_insw(addr, dst, count);
|
||||
}
|
||||
EXPORT_SYMBOL(ioread16_rep);
|
||||
|
||||
void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
|
||||
{
|
||||
mmio_insl(addr, dst, count);
|
||||
}
|
||||
EXPORT_SYMBOL(ioread32_rep);
|
||||
|
||||
void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
|
||||
{
|
||||
mmio_outsb(addr, src, count);
|
||||
}
|
||||
EXPORT_SYMBOL(iowrite8_rep);
|
||||
|
||||
void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
|
||||
{
|
||||
mmio_outsw(addr, src, count);
|
||||
}
|
||||
EXPORT_SYMBOL(iowrite16_rep);
|
||||
|
||||
void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
|
||||
{
|
||||
mmio_outsl(addr, src, count);
|
||||
}
|
||||
EXPORT_SYMBOL(iowrite32_rep);
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
/*
|
||||
* arch/sh/kernel/ioport.c
|
||||
*
|
||||
* Copyright (C) 2000 Niibe Yutaka
|
||||
* Copyright (C) 2005 - 2007 Paul Mundt
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
const unsigned long sh_io_port_base __read_mostly = -1;
|
||||
EXPORT_SYMBOL(sh_io_port_base);
|
||||
|
||||
void __iomem *__ioport_map(unsigned long addr, unsigned int size)
|
||||
{
|
||||
if (sh_mv.mv_ioport_map)
|
||||
return sh_mv.mv_ioport_map(addr, size);
|
||||
|
||||
return (void __iomem *)(addr + sh_io_port_base);
|
||||
}
|
||||
EXPORT_SYMBOL(__ioport_map);
|
||||
|
||||
void __iomem *ioport_map(unsigned long port, unsigned int nr)
|
||||
{
|
||||
void __iomem *ret;
|
||||
|
||||
ret = __ioport_map_trapped(port, nr);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return __ioport_map(port, nr);
|
||||
}
|
||||
EXPORT_SYMBOL(ioport_map);
|
||||
|
||||
void ioport_unmap(void __iomem *addr)
|
||||
{
|
||||
if (sh_mv.mv_ioport_unmap)
|
||||
sh_mv.mv_ioport_unmap(addr);
|
||||
}
|
||||
EXPORT_SYMBOL(ioport_unmap);
|
||||
|
|
@ -118,28 +118,6 @@ void __init sh_mv_setup(void)
|
|||
sh_mv.mv_##elem = generic_##elem; \
|
||||
} while (0)
|
||||
|
||||
#ifdef CONFIG_HAS_IOPORT
|
||||
|
||||
#ifdef P2SEG
|
||||
__set_io_port_base(P2SEG);
|
||||
#else
|
||||
__set_io_port_base(0);
|
||||
#endif
|
||||
|
||||
mv_set(inb); mv_set(inw); mv_set(inl);
|
||||
mv_set(outb); mv_set(outw); mv_set(outl);
|
||||
|
||||
mv_set(inb_p); mv_set(inw_p); mv_set(inl_p);
|
||||
mv_set(outb_p); mv_set(outw_p); mv_set(outl_p);
|
||||
|
||||
mv_set(insb); mv_set(insw); mv_set(insl);
|
||||
mv_set(outsb); mv_set(outsw); mv_set(outsl);
|
||||
|
||||
mv_set(ioport_map);
|
||||
mv_set(ioport_unmap);
|
||||
|
||||
#endif
|
||||
|
||||
mv_set(irq_demux);
|
||||
mv_set(mode_pins);
|
||||
mv_set(mem_init);
|
||||
|
|
|
|||
Reference in New Issue