dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/arch/parisc/Kconfig

300 lines
6.0 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config PARISC
def_bool y
ide: introduce HAVE_IDE To allow flexible configuration of IDE introduce HAVE_IDE. All archs except arm, um and s390 unconditionally select it. For arm the actual configuration determine if IDE is supported. This is a step towards introducing drivers/Kconfig for arm. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-09 09:46:40 +00:00
select HAVE_IDE
Add HAVE_OPROFILE Linus: On the per-architecture side, I do think it would be better to *not* have internal architecture knowledge in a generic file, and as such a line like depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32 really shouldn't exist in a file like kernel/Kconfig.instrumentation. It would be much better to do depends on ARCH_SUPPORTS_KPROBES in that generic file, and then architectures that do support it would just have a bool ARCH_SUPPORTS_KPROBES default y in *their* architecture files. That would seem to be much more logical, and is readable both for arch maintainers *and* for people who have no clue - and don't care - about which architecture is supposed to support which interface... Changelog: Actually, I know I gave this as the magic incantation, but now that I see it, I realize that I should have told you to just use config ARCH_SUPPORTS_KPROBES def_bool y instead, which is a bit denser. We seem to use both kinds of syntax for these things, but this is really what "def_bool" is there for... Changelog : - Moving to HAVE_*. - Add AVR32 oprofile. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-02 20:10:34 +00:00
select HAVE_OPROFILE
parisc: add ftrace (function and graph tracer) functionality This patch adds the ftrace debugging functionality to the parisc kernel. It will currently only work with 64bit kernels, because the gcc options -pg and -ffunction-sections can't be enabled at the same time and -ffunction-sections is still needed to be able to link 32bit kernels. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-02-08 23:43:36 +00:00
select HAVE_FUNCTION_TRACER if 64BIT
select HAVE_FUNCTION_GRAPH_TRACER if 64BIT
select HAVE_FUNCTION_TRACE_MCOUNT_TEST if 64BIT
parisc: add rtc platform driver Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2008-09-10 14:24:07 +00:00
select RTC_CLASS
parisc: rtc: Rename rtc-parisc to rtc-generic The rtc-parisc driver is not PA-RISC specific at all, as it uses the existing (but deprecated) generic RTC infrastructure ([gs]et_rtc_time()). Rename the driver from rtc-parisc to rtc-generic. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-02-19 15:46:49 +00:00
select RTC_DRV_GENERIC
cpumask: centralize cpu_online_map and cpu_possible_map Impact: cleanup Each SMP arch defines these themselves. Move them to a central location. Twists: 1) Some archs (m32, parisc, s390) set possible_map to all 1, so we add a CONFIG_INIT_ALL_POSSIBLE for this rather than break them. 2) mips and sparc32 '#define cpu_possible_map phys_cpu_present_map'. Those archs simply have phys_cpu_present_map replaced everywhere. 3) Alpha defined cpu_possible_map to cpu_present_map; this is tricky so I just manipulate them both in sync. 4) IA64, cris and m32r have gratuitous 'extern cpumask_t cpu_possible_map' declarations. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Tested-by: Tony Luck <tony.luck@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Mike Travis <travis@sgi.com> Cc: ink@jurassic.park.msu.ru Cc: rmk@arm.linux.org.uk Cc: starvik@axis.com Cc: tony.luck@intel.com Cc: takata@linux-m32r.org Cc: ralf@linux-mips.org Cc: grundler@parisc-linux.org Cc: paulus@samba.org Cc: schwidefsky@de.ibm.com Cc: lethal@linux-sh.org Cc: wli@holomorphy.com Cc: davem@davemloft.net Cc: jdike@addtoit.com Cc: mingo@redhat.com
2008-12-13 10:49:41 +00:00
select INIT_ALL_POSSIBLE
parisc: select BUG always On Wed, Mar 25, 2009 at 05:02:21PM +0300, Alexander Beregalov wrote: > arch/parisc/kernel/traps.c:321: error: 'PARISC_BUG_BREAK_INSN' > undeclared (first use in this function) > > # CONFIG_BUG is not set > CONFIG_EMBEDDED=y > > Is it a reasonable config? imho, no. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-25 14:09:10 +00:00
select BUG
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
select HAVE_PERF_EVENTS
parisc: use generic atomic64 on 32-bit Somewhat redundant since our atomic_t uses hashed-locks on 32-bit anyway... Maybe we can clean those up to be generic too someday. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-02 17:10:29 +00:00
select GENERIC_ATOMIC64 if !64BIT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
in many of their workstations & servers (HP9000 700 and 800 series,
and later HP3000 series). The PA-RISC Linux project home page is
at <http://www.parisc-linux.org/>.
config MMU
def_bool y
config STACK_GROWSUP
def_bool y
spinlock: lockbreak cleanup The break_lock data structure and code for spinlocks is quite nasty. Not only does it double the size of a spinlock but it changes locking to a potentially less optimal trylock. Put all of that under CONFIG_GENERIC_LOCKBREAK, and introduce a __raw_spin_is_contended that uses the lock data itself to determine whether there are waiters on the lock, to be used if CONFIG_GENERIC_LOCKBREAK is not set. Rename need_lockbreak to spin_needbreak, make it use spin_is_contended to decouple it from the spinlock implementation, and make it typesafe (rwlocks do not have any need_lockbreak sites -- why do they even get bloated up with that break_lock then?). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:31:20 +00:00
config GENERIC_LOCKBREAK
bool
default y
depends on SMP && PREEMPT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config RWSEM_GENERIC_SPINLOCK
def_bool y
config RWSEM_XCHGADD_ALGORITHM
bool
[PATCH] LOG2: Implement a general integer log2 facility in the kernel This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Howells <dhowells@redhat.com> Cc: Wojtek Kaniewski <wojtekka@toxygen.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:37:49 +00:00
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
[PATCH] bitops: parisc: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove ffz() - remove generic_fls64() - remove generic_hweight{32,16,8}() - remove generic_hweight64() - remove sched_find_first_bit() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 09:39:31 +00:00
config GENERIC_FIND_NEXT_BIT
bool
default y
[PARISC] Generic BUG Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-12-16 15:16:50 +00:00
config GENERIC_BUG
bool
default y
depends on BUG
[PATCH] bitops: parisc: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove ffz() - remove generic_fls64() - remove generic_hweight{32,16,8}() - remove generic_hweight64() - remove sched_find_first_bit() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 09:39:31 +00:00
config GENERIC_HWEIGHT
bool
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config GENERIC_CALIBRATE_DELAY
bool
default y
[PARISC] GENERIC_TIME patchset for parisc Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-01-02 22:54:16 +00:00
config GENERIC_TIME
bool
default y
[PATCH] hrtimer: round up relative start time on low-res arches CONFIG_TIME_LOW_RES is a temporary way for architectures to signal that they simply return xtime in do_gettimeoffset(). In this corner-case we want to round up by resolution when starting a relative timer, to avoid short timeouts. This will go away with the GTOD framework. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14 21:53:15 +00:00
config TIME_LOW_RES
bool
depends on SMP
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config GENERIC_HARDIRQS
def_bool y
config GENERIC_IRQ_PROBE
def_bool y
parisc: add LATENCYTOP_SUPPORT and CONFIG_STACKTRACE_SUPPORT Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-02-06 20:50:39 +00:00
config HAVE_LATENCYTOP_SUPPORT
def_bool y
[PATCH] genirq: cleanup: turn ARCH_HAS_IRQ_PER_CPU into CONFIG_IRQ_PER_CPU Cleanup: change ARCH_HAS_IRQ_PER_CPU into a Kconfig method. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 09:24:43 +00:00
config IRQ_PER_CPU
bool
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# unless you want to implement ACPI on PA-RISC ... ;-)
config PM
bool
parisc: add LATENCYTOP_SUPPORT and CONFIG_STACKTRACE_SUPPORT Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-02-06 20:50:39 +00:00
config STACKTRACE_SUPPORT
def_bool y
pci-dma: parisc: use include/linux/pci-dma.h Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:23:26 +00:00
config NEED_DMA_MAP_STATE
def_bool y
parisc: use asm-generic/scatterlist.h parisc uses iova and iova_length in scatterlist structure instead of dma_address and dma_length. However, the accessor are used so we can convert parisc to use asm-generic/scatterlist.h easily. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26 21:44:43 +00:00
config NEED_SG_DMA_LENGTH
def_bool y
[PATCH] ISA DMA Kconfig fixes - part 1 A bunch of drivers use ISA DMA helpers or their equivalents for platforms that have ISA with different DMA controller (a lot of ARM boxen). Currently there is no way to put such dependency in Kconfig - CONFIG_ISA is not it (e.g. it is not set on platforms that have no ISA slots, but have on-board devices that pretend to be ISA ones). New symbol added - ISA_DMA_API. Set when we have functional enable_dma()/set_dma_mode()/etc. set of helpers. Next patches in the series will add missing dependencies for drivers that need them. I'm very carefully staying the hell out of the recurring flamefest on what exactly CONFIG_ISA would mean in ideal world - added symbol has a well-defined meaning and for now I really want to treat it as completely independent from the mess around CONFIG_ISA. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-04 04:39:22 +00:00
config ISA_DMA_API
bool
[PATCH] Kconfig fix (BLK_DEV_FD dependencies) Sanitized and fixed floppy dependencies: split the messy dependencies for BLK_DEV_FD by introducing a new symbol (ARCH_MAY_HAVE_PC_FDC), making BLK_DEV_FD depend on that one and taking declarations of ARCH_MAY_HAVE_PC_FDC to arch/*/Kconfig. While we are at it, fixed several obvious cases when BLK_DEV_FD should have been excluded (architectures lacking asm/floppy.h are *not* going to have floppy.c compile, let alone work). If you can come up with better name for that ("this architecture might have working PC-compatible floppy disk controller"), you are more than welcome - just s/ARCH_MAY_HAVE_PC_FDC/your_prefered_name/g in the patch below... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 00:48:42 +00:00
config ARCH_MAY_HAVE_PC_FDC
bool
[PARISC] Update Kconfig for itimer selection 2.6.14-rc2-pa1: enable 100/250/1000HZ itimer selection Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Mark floppy as broken. Thanks Joel Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> make DISCONTIGMEM depend on 64BIT Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-22 02:52:46 +00:00
depends on BROKEN
[PATCH] Kconfig fix (BLK_DEV_FD dependencies) Sanitized and fixed floppy dependencies: split the messy dependencies for BLK_DEV_FD by introducing a new symbol (ARCH_MAY_HAVE_PC_FDC), making BLK_DEV_FD depend on that one and taking declarations of ARCH_MAY_HAVE_PC_FDC to arch/*/Kconfig. While we are at it, fixed several obvious cases when BLK_DEV_FD should have been excluded (architectures lacking asm/floppy.h are *not* going to have floppy.c compile, let alone work). If you can come up with better name for that ("this architecture might have working PC-compatible floppy disk controller"), you are more than welcome - just s/ARCH_MAY_HAVE_PC_FDC/your_prefered_name/g in the patch below... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 00:48:42 +00:00
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
source "init/Kconfig"
container freezer: implement freezer cgroup subsystem This patch implements a new freezer subsystem in the control groups framework. It provides a way to stop and resume execution of all tasks in a cgroup by writing in the cgroup filesystem. The freezer subsystem in the container filesystem defines a file named freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the cgroup. Subsequently writing "RUNNING" will unfreeze the tasks in the cgroup. Reading will return the current state. * Examples of usage : # mkdir /containers/freezer # mount -t cgroup -ofreezer freezer /containers # mkdir /containers/0 # echo $some_pid > /containers/0/tasks to get status of the freezer subsystem : # cat /containers/0/freezer.state RUNNING to freeze all tasks in the container : # echo FROZEN > /containers/0/freezer.state # cat /containers/0/freezer.state FREEZING # cat /containers/0/freezer.state FROZEN to unfreeze all tasks in the container : # echo RUNNING > /containers/0/freezer.state # cat /containers/0/freezer.state RUNNING This is the basic mechanism which should do the right thing for user space task in a simple scenario. It's important to note that freezing can be incomplete. In that case we return EBUSY. This means that some tasks in the cgroup are busy doing something that prevents us from completely freezing the cgroup at this time. After EBUSY, the cgroup will remain partially frozen -- reflected by freezer.state reporting "FREEZING" when read. The state will remain "FREEZING" until one of these things happens: 1) Userspace cancels the freezing operation by writing "RUNNING" to the freezer.state file 2) Userspace retries the freezing operation by writing "FROZEN" to the freezer.state file (writing "FREEZING" is not legal and returns EIO) 3) The tasks that blocked the cgroup from entering the "FROZEN" state disappear from the cgroup's set of tasks. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: export thaw_process] Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Tested-by: Matt Helsley <matthltc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 03:27:21 +00:00
source "kernel/Kconfig.freezer"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
menu "Processor type and features"
choice
prompt "Processor type"
default PA7000
config PA7000
bool "PA7000/PA7100"
---help---
This is the processor type of your CPU. This information is
used for optimizing purposes. In order to compile a kernel
that can run on all 32-bit PA CPUs (albeit not optimally fast),
you can specify "PA7000" here.
Specifying "PA8000" here will allow you to select a 64-bit kernel
which is required on some machines.
config PA7100LC
bool "PA7100LC"
help
Select this option for the PCX-L processor, as used in the
712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748,
D200, D210, D300, D310 and E-class
config PA7200
bool "PA7200"
help
Select this option for the PCX-T' processor, as used in the
C100, C110, J100, J110, J210XC, D250, D260, D350, D360,
K100, K200, K210, K220, K400, K410 and K420
config PA7300LC
bool "PA7300LC"
help
Select this option for the PCX-L2 processor, as used in the
744, A180, B132L, B160L, B180L, C132L, C160L, C180L,
D220, D230, D320 and D330.
config PA8X00
bool "PA8000 and up"
help
Select this option for PCX-U to PCX-W2 processors.
endchoice
# Define implied options from the CPU selection here
config PA20
def_bool y
depends on PA8X00
config PA11
def_bool y
depends on PA7000 || PA7100LC || PA7200 || PA7300LC
config PREFETCH
def_bool y
[PARISC] PA7200 also supports prefetch for read It seems PA7200 processors also suppress traps on loads to %r0. This means we can prefetch for read on these cpus. Of course, we can't support prefetch for write, since that requires LOAD DOUBLEWORD which was added with PA2.0 Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-08-14 00:37:26 +00:00
depends on PA8X00 || PA7200
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config 64BIT
bool "64-bit kernel"
depends on PA8X00
help
Enable this if you want to support 64bit kernel on PA-RISC platform.
At the moment, only people willing to use more than 2GB of RAM,
or having a 64bit-only capable PA-RISC machine should say Y here.
Since there is no 64bit userland on PA-RISC, there is no point to
enable this option otherwise. The 64bit kernel is significantly bigger
and slower than the 32bit one.
[PARISC] Further work for multiple page sizes More work towards supporing multiple page sizes on 64-bit. Convert some assumptions that 64bit uses 3 level page tables into testing PT_NLEVELS. Also some BUG() to BUG_ON() conversions and some cleanups to assembler. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-04-20 20:40:23 +00:00
choice
prompt "Kernel page size"
default PARISC_PAGE_SIZE_4KB if !64BIT
default PARISC_PAGE_SIZE_4KB if 64BIT
# default PARISC_PAGE_SIZE_16KB if 64BIT
config PARISC_PAGE_SIZE_4KB
bool "4KB"
help
This lets you select the page size of the kernel. For best
performance, a page size of 16KB is recommended. For best
compatibility with 32bit applications, a page size of 4KB should be
selected (the vast majority of 32bit binaries work perfectly fine
with a larger page size).
4KB For best 32bit compatibility
16KB For best performance
64KB For best performance, might give more overhead.
If you don't know what to do, choose 4KB.
config PARISC_PAGE_SIZE_16KB
bool "16KB (EXPERIMENTAL)"
depends on PA8X00 && EXPERIMENTAL
config PARISC_PAGE_SIZE_64KB
bool "64KB (EXPERIMENTAL)"
depends on PA8X00 && EXPERIMENTAL
endchoice
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config SMP
bool "Symmetric multi-processing support"
parisc: convert to generic helpers for IPI function calls This converts parisc to use the new helpers for smp_call_function() and friends, and adds support for smp_call_function_single(). Tested by Kyle, seems to work. Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-10 18:50:56 +00:00
select USE_GENERIC_SMP_HELPERS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
you have a system with more than one CPU, say Y.
If you say N here, the kernel will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
you say Y here, the kernel will run on many, but not all,
singleprocessor machines. On a singleprocessor machine, the kernel
will run faster if you say N here.
remove Documentation/smp.txt After seeing the filename I'd have expected something about the implementation of SMP in the Linux kernel - not some notes on kernel configuration and building trivialities noone would search at this place. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alan Cox <alan@redhat.com>
2008-02-03 13:50:21 +00:00
See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
available at <http://www.tldp.org/docs.html#howto>.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
If you don't know what to do here, say N.
config HOTPLUG_CPU
bool
default y if SMP
select HOTPLUG
[PARISC] Simplify DISCONTIGMEM in Kconfig parisc was previously displaying both the mm/Kconfig memory model menu, and its own prompt. Remove prompt and have CONFIG_64BIT toggle between DISCONTIGMEM and FLATMEM. Also remove the EXPERIMENTAL from discontigmem support... It's been running fine for months (years?) now. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-28 06:59:36 +00:00
config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on 64BIT
[PATCH] make each arch use mm/Kconfig For all architectures, this just means that you'll see a "Memory Model" choice in your architecture menu. For those that implement DISCONTIGMEM, you may eventually want to make your ARCH_DISCONTIGMEM_ENABLE a "def_bool y" and make your users select DISCONTIGMEM right out of the new choice menu. The only disadvantage might be if you have some specific things that you need in your help option to explain something about DISCONTIGMEM. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:07:43 +00:00
config ARCH_DISCONTIGMEM_ENABLE
[PARISC] Simplify DISCONTIGMEM in Kconfig parisc was previously displaying both the mm/Kconfig memory model menu, and its own prompt. Remove prompt and have CONFIG_64BIT toggle between DISCONTIGMEM and FLATMEM. Also remove the EXPERIMENTAL from discontigmem support... It's been running fine for months (years?) now. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-28 06:59:36 +00:00
def_bool y
depends on 64BIT
config ARCH_FLATMEM_ENABLE
def_bool y
config ARCH_DISCONTIGMEM_DEFAULT
def_bool y
depends on ARCH_DISCONTIGMEM_ENABLE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] Configurable NODES_SHIFT Current implementations define NODES_SHIFT in include/asm-xxx/numnodes.h for each arch. Its definition is sometimes configurable. Indeed, ia64 defines 5 NODES_SHIFT values in the current git tree. But it looks a bit messy. SGI-SN2(ia64) system requires 1024 nodes, and the number of nodes already has been changeable by config. Suitable node's number may be changed in the future even if it is other architecture. So, I wrote configurable node's number. This patch set defines just default value for each arch which needs multi nodes except ia64. But, it is easy to change to configurable if necessary. On ia64 the number of nodes can be already configured in generic ia64 and SN2 config. But, NODES_SHIFT is defined for DIG64 and HP'S machine too. So, I changed it so that all platforms can be configured via CONFIG_NODES_SHIFT. It would be simpler. See also: http://marc.theaimsgroup.com/?l=linux-kernel&m=114358010523896&w=2 Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 05:53:53 +00:00
config NODES_SHIFT
int
default "3"
depends on NEED_MULTIPLE_NODES
[PARISC] Add PREEMPT support Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-03-25 04:24:21 +00:00
source "kernel/Kconfig.preempt"
[PARISC] Update Kconfig for itimer selection 2.6.14-rc2-pa1: enable 100/250/1000HZ itimer selection Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Mark floppy as broken. Thanks Joel Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> make DISCONTIGMEM depend on 64BIT Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-22 02:52:46 +00:00
source "kernel/Kconfig.hz"
[PATCH] make each arch use mm/Kconfig For all architectures, this just means that you'll see a "Memory Model" choice in your architecture menu. For those that implement DISCONTIGMEM, you may eventually want to make your ARCH_DISCONTIGMEM_ENABLE a "def_bool y" and make your users select DISCONTIGMEM right out of the new choice menu. The only disadvantage might be if you have some specific things that you need in your help option to explain something about DISCONTIGMEM. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:07:43 +00:00
source "mm/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config COMPAT
def_bool y
depends on 64BIT
config HPUX
bool "Support for HP-UX binaries"
depends on !64BIT
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP
default "32"
endmenu
source "drivers/parisc/Kconfig"
menu "Executable file formats"
source "fs/Kconfig.binfmt"
endmenu
[NET]: add a top-level Networking menu to *config Create a new top-level menu named "Networking" thus moving net related options and protocol selection way from the drivers menu and up on the top-level where they belong. To implement this all architectures has to source "net/Kconfig" before drivers/*/Kconfig in their Kconfig file. This change has been implemented for all architectures. Device drivers for ordinary NIC's are still to be found in the Device Drivers section, but Bluetooth, IrDA and ax25 are located with their corresponding menu entries under the new networking menu item. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-12 04:03:49 +00:00
source "net/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
source "drivers/Kconfig"
source "fs/Kconfig"
source "arch/parisc/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"