dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/arch/x86/ia32/ia32entry.S

501 lines
13 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Compatibility mode system call entry point for x86-64.
*
* Copyright 2000-2002 Andi Kleen, SuSE Labs.
*/
#include <asm/dwarf2.h>
#include <asm/calling.h>
kbuild: alpha,x86_64 use generic asm-offsets.h support Delete obsolete stuff from arch makefiles Rename .h file to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 19:28:48 +00:00
#include <asm/asm-offsets.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/current.h>
#include <asm/errno.h>
#include <asm/ia32_unistd.h>
#include <asm/thread_info.h>
#include <asm/segment.h>
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
#include <asm/irqflags.h>
x86, extable: Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
2012-04-20 19:19:50 +00:00
#include <asm/asm.h>
x86, smap: Add STAC and CLAC instructions to control user space access When Supervisor Mode Access Prevention (SMAP) is enabled, access to userspace from the kernel is controlled by the AC flag. To make the performance of manipulating that flag acceptable, there are two new instructions, STAC and CLAC, to set and clear it. This patch adds those instructions, via alternative(), when the SMAP feature is enabled. It also adds X86_EFLAGS_AC unconditionally to the SYSCALL entry mask; there is simply no reason to make that one conditional. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1348256595-29119-9-git-send-email-hpa@linux.intel.com
2012-09-21 19:43:12 +00:00
#include <asm/smap.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/linkage.h>
Audit: push audit success and retcode into arch ptrace.h The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion] Acked-by: Tony Luck <tony.luck@intel.com> [for ia64] Acked-by: Richard Weinberger <richard@nod.at> [for uml] Acked-by: David S. Miller <davem@davemloft.net> [for sparc] Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
2012-01-03 19:23:06 +00:00
#include <linux/err.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
#include <linux/elf-em.h>
#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
#define __AUDIT_ARCH_LE 0x40000000
#ifndef CONFIG_AUDITSYSCALL
x86: Don't leak 64-bit kernel register values to 32-bit processes While 32-bit processes can't directly access R8...R15, they can gain access to these registers by temporarily switching themselves into 64-bit mode. Therefore, registers not preserved anyway by called C functions (i.e. R8...R11) must be cleared prior to returning to user mode. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> LKML-Reference: <4AC34D73020000780001744A@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-30 10:22:11 +00:00
#define sysexit_audit ia32_ret_from_sys_call
#define sysretl_audit ia32_ret_from_sys_call
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
#endif
x86: Separate out entry text section Put x86 entry code into a separate link section: .entry.text. Separating the entry text section seems to have performance benefits - caused by more efficient instruction cache usage. Running hackbench with perf stat --repeat showed that the change compresses the icache footprint. The icache load miss rate went down by about 15%: before patch: 19417627 L1-icache-load-misses ( +- 0.147% ) after patch: 16490788 L1-icache-load-misses ( +- 0.180% ) The motivation of the patch was to fix a particular kprobes bug that relates to the entry text section, the performance advantage was discovered accidentally. Whole perf output follows: - results for current tip tree: Performance counter stats for './hackbench/hackbench 10' (500 runs): 19417627 L1-icache-load-misses ( +- 0.147% ) 2676914223 instructions # 0.497 IPC ( +- 0.079% ) 5389516026 cycles ( +- 0.144% ) 0.206267711 seconds time elapsed ( +- 0.138% ) - results for current tip tree with the patch applied: Performance counter stats for './hackbench/hackbench 10' (500 runs): 16490788 L1-icache-load-misses ( +- 0.180% ) 2717734941 instructions # 0.502 IPC ( +- 0.079% ) 5414756975 cycles ( +- 0.148% ) 0.206747566 seconds time elapsed ( +- 0.137% ) Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: masami.hiramatsu.pt@hitachi.com Cc: ananth@in.ibm.com Cc: davem@davemloft.net Cc: 2nddept-manager@sdl.hitachi.co.jp LKML-Reference: <20110307181039.GB15197@jolsa.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-07 18:10:39 +00:00
.section .entry.text, "ax"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.macro IA32_ARG_FIXUP noebp=0
movl %edi,%r8d
.if \noebp
.else
movl %ebp,%r9d
.endif
xchg %ecx,%esi
movl %ebx,%edi
movl %edx,%edx /* zero extension */
.endm
/* clobbers %eax */
x86: Don't leak 64-bit kernel register values to 32-bit processes While 32-bit processes can't directly access R8...R15, they can gain access to these registers by temporarily switching themselves into 64-bit mode. Therefore, registers not preserved anyway by called C functions (i.e. R8...R11) must be cleared prior to returning to user mode. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> LKML-Reference: <4AC34D73020000780001744A@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-30 10:22:11 +00:00
.macro CLEAR_RREGS offset=0, _r9=rax
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
xorl %eax,%eax
x86: Don't leak 64-bit kernel register values to 32-bit processes While 32-bit processes can't directly access R8...R15, they can gain access to these registers by temporarily switching themselves into 64-bit mode. Therefore, registers not preserved anyway by called C functions (i.e. R8...R11) must be cleared prior to returning to user mode. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> LKML-Reference: <4AC34D73020000780001744A@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-30 10:22:11 +00:00
movq %rax,\offset+R11(%rsp)
movq %rax,\offset+R10(%rsp)
movq %\_r9,\offset+R9(%rsp)
movq %rax,\offset+R8(%rsp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.endm
x86 ptrace: unify syscall tracing This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-09 09:38:07 +00:00
/*
* Reload arg registers from stack in case ptrace changed them.
* We don't reload %eax because syscall_trace_enter() returned
x86-64, compat: Retruncate rax after ia32 syscall entry tracing In commit d4d6715, we reopened an old hole for a 64-bit ptracer touching a 32-bit tracee in system call entry. A %rax value set via ptrace at the entry tracing stop gets used whole as a 32-bit syscall number, while we only check the low 32 bits for validity. Fix it by truncating %rax back to 32 bits after syscall_trace_enter, in addition to testing the full 64 bits as has already been added. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-14 19:22:58 +00:00
* the %rax value we should see. Instead, we just truncate that
* value to 32 bits again as we did on entry from user mode.
* If it's a new value set by user_regset during entry tracing,
* this matches the normal truncation of the user-mode value.
* If it's -1 to make us punt the syscall, then (u32)-1 is still
* an appropriately invalid value.
x86 ptrace: unify syscall tracing This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-09 09:38:07 +00:00
*/
x86-64: slightly stream-line 32-bit syscall entry code Avoid updating registers or memory twice as well as needlessly loading or copying registers. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 12:21:11 +00:00
.macro LOAD_ARGS32 offset, _r9=0
.if \_r9
x86_64: Zero extend all registers after ptrace in 32bit entry path. Strictly it's only needed for eax. It actually does a little more than strictly needed -- the other registers are already zero extended. Also remove the now unnecessary and non functional compat task check in ptrace. This is CVE-2007-4573 Found by Wojciech Purczynski Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-21 14:16:18 +00:00
movl \offset+16(%rsp),%r9d
x86-64: slightly stream-line 32-bit syscall entry code Avoid updating registers or memory twice as well as needlessly loading or copying registers. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 12:21:11 +00:00
.endif
x86_64: Zero extend all registers after ptrace in 32bit entry path. Strictly it's only needed for eax. It actually does a little more than strictly needed -- the other registers are already zero extended. Also remove the now unnecessary and non functional compat task check in ptrace. This is CVE-2007-4573 Found by Wojciech Purczynski Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-21 14:16:18 +00:00
movl \offset+40(%rsp),%ecx
movl \offset+48(%rsp),%edx
movl \offset+56(%rsp),%esi
movl \offset+64(%rsp),%edi
x86-64, compat: Retruncate rax after ia32 syscall entry tracing In commit d4d6715, we reopened an old hole for a 64-bit ptracer touching a 32-bit tracee in system call entry. A %rax value set via ptrace at the entry tracing stop gets used whole as a 32-bit syscall number, while we only check the low 32 bits for validity. Fix it by truncating %rax back to 32 bits after syscall_trace_enter, in addition to testing the full 64 bits as has already been added. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-14 19:22:58 +00:00
movl %eax,%eax /* zero extension */
x86_64: Zero extend all registers after ptrace in 32bit entry path. Strictly it's only needed for eax. It actually does a little more than strictly needed -- the other registers are already zero extended. Also remove the now unnecessary and non functional compat task check in ptrace. This is CVE-2007-4573 Found by Wojciech Purczynski Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-21 14:16:18 +00:00
.endm
[PATCH] x86_64: More CFI fixes for 32bit entry code Frame unwind information was still incorrect for ia32_ptregs_common (sorry, my fault), and could be improved for some of the other entry points. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 21:41:59 +00:00
.macro CFI_STARTPROC32 simple
CFI_STARTPROC \simple
CFI_UNDEFINED r8
CFI_UNDEFINED r9
CFI_UNDEFINED r10
CFI_UNDEFINED r11
CFI_UNDEFINED r12
CFI_UNDEFINED r13
CFI_UNDEFINED r14
CFI_UNDEFINED r15
.endm
x86/paravirt: add sysret/sysexit pvops for returning to 32-bit compatibility userspace In a 64-bit system, we need separate sysret/sysexit operations to return to a 32-bit userspace. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:28 +00:00
#ifdef CONFIG_PARAVIRT
ENTRY(native_usergs_sysret32)
swapgs
sysretl
ENDPROC(native_usergs_sysret32)
ENTRY(native_irq_enable_sysexit)
swapgs
sti
sysexit
ENDPROC(native_irq_enable_sysexit)
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* 32bit SYSENTER instruction entry.
*
* Arguments:
* %eax System call number.
* %ebx Arg1
* %ecx Arg2
* %edx Arg3
* %esi Arg4
* %edi Arg5
* %ebp user stack
* 0(%ebp) Arg6
*
* Interrupts off.
*
* This is purely a fast path. For anything complicated we use the int 0x80
* path below. Set up a complete hardware stack frame to share code
* with the int 0x80 path.
*/
ENTRY(ia32_sysenter_target)
[PATCH] x86_64: More CFI fixes for 32bit entry code Frame unwind information was still incorrect for ia32_ptregs_common (sorry, my fault), and could be improved for some of the other entry points. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 21:41:59 +00:00
CFI_STARTPROC32 simple
[PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder Current gcc generates calls not jumps to noreturn functions. When that happens the return address can point to the next function, which confuses the unwinder. This patch works around it by marking asynchronous exception frames in contrast normal call frames in the unwind information. Then teach the unwinder to decode this. For normal call frames the unwinder now subtracts one from the address which avoids this problem. The standard libgcc unwinder uses the same trick. It doesn't include adjustment of the printed address (i.e. for the original example, it'd still be kernel_math_error+0 that gets displayed, but the unwinder wouldn't get confused anymore. This only works with binutils 2.6.17+ and some versions of H.J.Lu's 2.6.16 unfortunately because earlier binutils don't support .cfi_signal_frame [AK: added automatic detection of the new binutils and wrote description] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:41 +00:00
CFI_SIGNAL_FRAME
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_DEF_CFA rsp,0
CFI_REGISTER rsp,rbp
x86/paravirt: groundwork for 64-bit Xen support, fix Ingo Molnar wrote: > * Jeremy Fitzhardinge <jeremy@goop.org> wrote: > > >>> It quickly broke the build in testing: >>> >>> include/asm/pgalloc.h: In function ‘paravirt_pgd_free': >>> include/asm/pgalloc.h:14: error: parameter name omitted >>> arch/x86/kernel/entry_64.S: In file included from >>> arch/x86/kernel/traps_64.c:51:include/asm/pgalloc.h: In function >>> ‘paravirt_pgd_free': >>> include/asm/pgalloc.h:14: error: parameter name omitted >>> >>> >> No, looks like my fault. The non-PARAVIRT version of >> paravirt_pgd_free() is: >> >> static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *) {} >> >> but C doesn't like missing parameter names, even if unused. >> >> This should fix it: >> > > that fixed the build but now we've got a boot crash with this config: > > time.c: Detected 2010.304 MHz processor. > spurious 8259A interrupt: IRQ7. > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [<0000000000000000>] > PGD 0 > Thread overran stack, or stack corrupted > Oops: 0010 [1] SMP > CPU 0 > > with: > > http://redhat.com/~mingo/misc/config-Thu_Jun_26_12_46_46_CEST_2008.bad > Use SWAPGS_UNSAFE_STACK in ia32entry.S in the places where the active stack is the usermode stack. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-26 14:28:51 +00:00
SWAPGS_UNSAFE_STACK
x86-64: Move kernelstack from PDA to per-cpu. Also clean up PER_CPU_VAR usage in xen-asm_64.S tj: * remove now unused stack_thread_info() * s/kernelstack/kernel_stack/ * added FIXME comment in xen-asm_64.S Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
movq PER_CPU_VAR(kernel_stack), %rsp
addq $(KERNEL_STACK_OFFSET),%rsp
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
/*
* No need to follow this irqs on/off section: the syscall
* disabled irqs, here we enable it straight after entry:
*/
x86, 64-bit: ia32entry: replace privileged instructions with pvops Replace privileged instructions with the corresponding pvops in ia32entry.S. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:29 +00:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movl %ebp,%ebp /* zero extension */
x86: Use {push,pop}_cfi in more places Cleaning up and shortening code... Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Alexander van Heukelum <heukelum@fastmail.fm> LKML-Reference: <4D6BD35002000078000341DA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28 15:54:40 +00:00
pushq_cfi $__USER32_DS
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
/*CFI_REL_OFFSET ss,0*/
x86: Use {push,pop}_cfi in more places Cleaning up and shortening code... Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Alexander van Heukelum <heukelum@fastmail.fm> LKML-Reference: <4D6BD35002000078000341DA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28 15:54:40 +00:00
pushq_cfi %rbp
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REL_OFFSET rsp,0
x86: Use {push,pop}_cfi in more places Cleaning up and shortening code... Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Alexander van Heukelum <heukelum@fastmail.fm> LKML-Reference: <4D6BD35002000078000341DA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28 15:54:40 +00:00
pushfq_cfi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
/*CFI_REL_OFFSET rflags,0*/
x86-64: Slightly shorten line system call entry and exit paths GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:17:45 +00:00
movl TI_sysenter_return+THREAD_INFO(%rsp,3*8-KERNEL_STACK_OFFSET),%r10d
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REGISTER rip,r10
x86: Use {push,pop}_cfi in more places Cleaning up and shortening code... Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Alexander van Heukelum <heukelum@fastmail.fm> LKML-Reference: <4D6BD35002000078000341DA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28 15:54:40 +00:00
pushq_cfi $__USER32_CS
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
/*CFI_REL_OFFSET cs,0*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movl %eax, %eax
x86: Use {push,pop}_cfi in more places Cleaning up and shortening code... Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Alexander van Heukelum <heukelum@fastmail.fm> LKML-Reference: <4D6BD35002000078000341DA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28 15:54:40 +00:00
pushq_cfi %r10
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REL_OFFSET rip,0
x86: Use {push,pop}_cfi in more places Cleaning up and shortening code... Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Alexander van Heukelum <heukelum@fastmail.fm> LKML-Reference: <4D6BD35002000078000341DA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28 15:54:40 +00:00
pushq_cfi %rax
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
cld
x86, asm: Flip SAVE_ARGS arguments logic This saves us the else part of the conditional statement in the macro. No functionality change. Signed-off-by: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1306873314-32523-3-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-05-31 20:21:52 +00:00
SAVE_ARGS 0,1,0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* no need to do an access_ok check here because rbp has been
32bit zero extended */
x86, smap: Add STAC and CLAC instructions to control user space access When Supervisor Mode Access Prevention (SMAP) is enabled, access to userspace from the kernel is controlled by the AC flag. To make the performance of manipulating that flag acceptable, there are two new instructions, STAC and CLAC, to set and clear it. This patch adds those instructions, via alternative(), when the SMAP feature is enabled. It also adds X86_EFLAGS_AC unconditionally to the SYSCALL entry mask; there is simply no reason to make that one conditional. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1348256595-29119-9-git-send-email-hpa@linux.intel.com
2012-09-21 19:43:12 +00:00
ASM_STAC
x86-64: slightly stream-line 32-bit syscall entry code Avoid updating registers or memory twice as well as needlessly loading or copying registers. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 12:21:11 +00:00
1: movl (%rbp),%ebp
x86, extable: Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
2012-04-20 19:19:50 +00:00
_ASM_EXTABLE(1b,ia32_badarg)
x86, smap: Add STAC and CLAC instructions to control user space access When Supervisor Mode Access Prevention (SMAP) is enabled, access to userspace from the kernel is controlled by the AC flag. To make the performance of manipulating that flag acceptable, there are two new instructions, STAC and CLAC, to set and clear it. This patch adds those instructions, via alternative(), when the SMAP feature is enabled. It also adds X86_EFLAGS_AC unconditionally to the SYSCALL entry mask; there is simply no reason to make that one conditional. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1348256595-29119-9-git-send-email-hpa@linux.intel.com
2012-09-21 19:43:12 +00:00
ASM_CLAC
x86-64: Slightly shorten line system call entry and exit paths GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:17:45 +00:00
orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REMEMBER_STATE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jnz sysenter_tracesys
x86-64, compat: Test %rax for the syscall number, not %eax On 64 bits, we always, by necessity, jump through the system call table via %rax. For 32-bit system calls, in theory the system call number is stored in %eax, and the code was testing %eax for a valid system call number. At one point we loaded the stored value back from the stack to enforce zero-extension, but that was removed in checkin d4d67150165df8bf1cc05e532f6efca96f907cab. An actual 32-bit process will not be able to introduce a non-zero-extended number, but it can happen via ptrace. Instead of re-introducing the zero-extension, test what we are actually going to use, i.e. %rax. This only adds a handful of REX prefixes to the code. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@kernel.org> Cc: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org>
2010-09-14 19:42:41 +00:00
cmpq $(IA32_NR_syscalls-1),%rax
[PATCH] x86_64: Eliminate IA32_NR_syscalls define Or rather compute it based on the table length automatically. This also has the intended side effect of not warning for new system calls anymore. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-07 17:50:31 +00:00
ja ia32_badsys
x86 ptrace: unify syscall tracing This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-09 09:38:07 +00:00
sysenter_do_call:
x86-64: slightly stream-line 32-bit syscall entry code Avoid updating registers or memory twice as well as needlessly loading or copying registers. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 12:21:11 +00:00
IA32_ARG_FIXUP
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
sysenter_dispatch:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
call *ia32_sys_call_table(,%rax,8)
movq %rax,RAX-ARGOFFSET(%rsp)
x86, 64-bit: ia32entry: replace privileged instructions with pvops Replace privileged instructions with the corresponding pvops in ia32entry.S. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:29 +00:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_OFF
x86-64: Slightly shorten line system call entry and exit paths GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:17:45 +00:00
testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
jnz sysexit_audit
sysexit_from_sys_call:
x86-64: Slightly shorten line system call entry and exit paths GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:17:45 +00:00
andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* clear IF, that popfq doesn't enable interrupts early */
andl $~0x200,EFLAGS-R11(%rsp)
x86 vDSO: ia32 sysenter_return This changes the 64-bit kernel's support for the 32-bit sysenter instruction to use stored fields rather than constants for the user-mode return address, as the 32-bit kernel does. This adds a sysenter_return field to struct thread_info, as 32-bit has. There is no observable effect from this yet. It makes the assembly code independent of the 32-bit vDSO mapping address, paving the way for making the vDSO address vary as it does on the 32-bit kernel. [ akpm@linux-foundation.org: build fix on !CONFIG_IA32_EMULATION ] Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:30:43 +00:00
movl RIP-R11(%rsp),%edx /* User %eip */
CFI_REGISTER rip,rdx
x86, asm: Flip RESTORE_ARGS arguments logic ... thus getting rid of the "else" part of the conditional statement in the macro. No functionality change. Signed-off-by: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1306873314-32523-4-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-05-31 20:21:53 +00:00
RESTORE_ARGS 0,24,0,0,0,0
x86: Don't leak 64-bit kernel register values to 32-bit processes While 32-bit processes can't directly access R8...R15, they can gain access to these registers by temporarily switching themselves into 64-bit mode. Therefore, registers not preserved anyway by called C functions (i.e. R8...R11) must be cleared prior to returning to user mode. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> LKML-Reference: <4AC34D73020000780001744A@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-30 10:22:11 +00:00
xorq %r8,%r8
xorq %r9,%r9
xorq %r10,%r10
xorq %r11,%r11
x86: Use {push,pop}_cfi in more places Cleaning up and shortening code... Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Alexander van Heukelum <heukelum@fastmail.fm> LKML-Reference: <4D6BD35002000078000341DA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28 15:54:40 +00:00
popfq_cfi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
/*CFI_RESTORE rflags*/
x86: Use {push,pop}_cfi in more places Cleaning up and shortening code... Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Alexander van Heukelum <heukelum@fastmail.fm> LKML-Reference: <4D6BD35002000078000341DA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28 15:54:40 +00:00
popq_cfi %rcx /* User %esp */
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REGISTER rsp,rcx
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_ON
x86/paravirt: add sysret/sysexit pvops for returning to 32-bit compatibility userspace In a 64-bit system, we need separate sysret/sysexit operations to return to a 32-bit userspace. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:28 +00:00
ENABLE_INTERRUPTS_SYSEXIT32
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
#ifdef CONFIG_AUDITSYSCALL
.macro auditsys_entry_common
movl %esi,%r9d /* 6th arg: 4th syscall arg */
movl %edx,%r8d /* 5th arg: 3rd syscall arg */
/* (already in %ecx) 4th arg: 2nd syscall arg */
movl %ebx,%edx /* 3rd arg: 1st syscall arg */
movl %eax,%esi /* 2nd arg: syscall number */
movl $AUDIT_ARCH_I386,%edi /* 1st arg: audit arch */
audit: inline audit_syscall_entry to reduce burden on archs Every arch calls: if (unlikely(current->audit_context)) audit_syscall_entry() which requires knowledge about audit (the existance of audit_context) in the arch code. Just do it all in static inline in audit.h so that arch's can remain blissfully ignorant. Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-03 19:23:06 +00:00
call __audit_syscall_entry
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall number */
x86-64, compat: Test %rax for the syscall number, not %eax On 64 bits, we always, by necessity, jump through the system call table via %rax. For 32-bit system calls, in theory the system call number is stored in %eax, and the code was testing %eax for a valid system call number. At one point we loaded the stored value back from the stack to enforce zero-extension, but that was removed in checkin d4d67150165df8bf1cc05e532f6efca96f907cab. An actual 32-bit process will not be able to introduce a non-zero-extended number, but it can happen via ptrace. Instead of re-introducing the zero-extension, test what we are actually going to use, i.e. %rax. This only adds a handful of REX prefixes to the code. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@kernel.org> Cc: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org>
2010-09-14 19:42:41 +00:00
cmpq $(IA32_NR_syscalls-1),%rax
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
ja ia32_badsys
movl %ebx,%edi /* reload 1st syscall arg */
movl RCX-ARGOFFSET(%rsp),%esi /* reload 2nd syscall arg */
movl RDX-ARGOFFSET(%rsp),%edx /* reload 3rd syscall arg */
movl RSI-ARGOFFSET(%rsp),%ecx /* reload 4th syscall arg */
movl RDI-ARGOFFSET(%rsp),%r8d /* reload 5th syscall arg */
.endm
x86-64: Fix register leak in 32-bit syscall audting Restoring %ebp after the call to audit_syscall_exit() is not only unnecessary (because the register didn't get clobbered), but in the sysenter case wasn't even doing the right thing: It loaded %ebp from a location below the top of stack (RBP < ARGOFFSET), i.e. arbitrary kernel data got passed back to user mode in the register. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: <stable@kernel.org> LKML-Reference: <4AE5CC4D020000780001BD13@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:20:29 +00:00
.macro auditsys_exit exit
x86-64: Slightly shorten line system call entry and exit paths GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:17:45 +00:00
testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
x86: Don't leak 64-bit kernel register values to 32-bit processes While 32-bit processes can't directly access R8...R15, they can gain access to these registers by temporarily switching themselves into 64-bit mode. Therefore, registers not preserved anyway by called C functions (i.e. R8...R11) must be cleared prior to returning to user mode. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> LKML-Reference: <4AC34D73020000780001744A@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-30 10:22:11 +00:00
jnz ia32_ret_from_sys_call
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
TRACE_IRQS_ON
sti
movl %eax,%esi /* second arg, syscall return value */
Audit: push audit success and retcode into arch ptrace.h The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion] Acked-by: Tony Luck <tony.luck@intel.com> [for ia64] Acked-by: Richard Weinberger <richard@nod.at> [for uml] Acked-by: David S. Miller <davem@davemloft.net> [for sparc] Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
2012-01-03 19:23:06 +00:00
cmpl $-MAX_ERRNO,%eax /* is it an error ? */
audit: ia32entry.S sign extend error codes when calling 64 bit code In the ia32entry syscall exit audit fastpath we have assembly code which calls __audit_syscall_exit directly. This code was, however, zeroes the upper 32 bits of the return code. It then proceeded to call code which expects longs to be 64bits long. In order to handle code which expects longs to be 64bit we sign extend the return code if that code is an error. Thus the __audit_syscall_exit function can correctly handle using the values in snprintf("%ld"). This fixes the regression introduced in 5cbf1565f29eb57a86a. Old record: type=SYSCALL msg=audit(1306197182.256:281): arch=40000003 syscall=192 success=no exit=4294967283 New record: type=SYSCALL msg=audit(1306197182.256:281): arch=40000003 syscall=192 success=no exit=-13 Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com>
2012-01-03 19:23:06 +00:00
jbe 1f
movslq %eax, %rsi /* if error sign extend to 64 bits */
1: setbe %al /* 1 if error, 0 if not */
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
movzbl %al,%edi /* zero-extend that into %edi */
Audit: push audit success and retcode into arch ptrace.h The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion] Acked-by: Tony Luck <tony.luck@intel.com> [for ia64] Acked-by: Richard Weinberger <richard@nod.at> [for uml] Acked-by: David S. Miller <davem@davemloft.net> [for sparc] Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
2012-01-03 19:23:06 +00:00
call __audit_syscall_exit
movq RAX-ARGOFFSET(%rsp),%rax /* reload syscall return value */
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
cli
TRACE_IRQS_OFF
x86-64: Slightly shorten line system call entry and exit paths GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:17:45 +00:00
testl %edi,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
x86: Don't leak 64-bit kernel register values to 32-bit processes While 32-bit processes can't directly access R8...R15, they can gain access to these registers by temporarily switching themselves into 64-bit mode. Therefore, registers not preserved anyway by called C functions (i.e. R8...R11) must be cleared prior to returning to user mode. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> LKML-Reference: <4AC34D73020000780001744A@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-30 10:22:11 +00:00
jz \exit
CLEAR_RREGS -ARGOFFSET
jmp int_with_check
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
.endm
sysenter_auditsys:
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_RESTORE_STATE
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
auditsys_entry_common
movl %ebp,%r9d /* reload 6th syscall arg */
jmp sysenter_dispatch
sysexit_audit:
auditsys_exit sysexit_from_sys_call
#endif
sysenter_tracesys:
#ifdef CONFIG_AUDITSYSCALL
x86-64: Slightly shorten line system call entry and exit paths GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:17:45 +00:00
testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
jz sysenter_auditsys
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
SAVE_REST
CLEAR_RREGS
x86: ia32 ptrace vs -ENOSYS sysenter/syscall The previous "x86_64 ia32 ptrace vs -ENOSYS" fix only covered the int $0x80 system call entries. This does the same fix for the sysenter and syscall instruction paths. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-19 01:23:50 +00:00
movq $-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
x86_64: Zero extend all registers after ptrace in 32bit entry path. Strictly it's only needed for eax. It actually does a little more than strictly needed -- the other registers are already zero extended. Also remove the now unnecessary and non functional compat task check in ptrace. This is CVE-2007-4573 Found by Wojciech Purczynski Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-21 14:16:18 +00:00
LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
RESTORE_REST
x86-64, compat: Test %rax for the syscall number, not %eax On 64 bits, we always, by necessity, jump through the system call table via %rax. For 32-bit system calls, in theory the system call number is stored in %eax, and the code was testing %eax for a valid system call number. At one point we loaded the stored value back from the stack to enforce zero-extension, but that was removed in checkin d4d67150165df8bf1cc05e532f6efca96f907cab. An actual 32-bit process will not be able to introduce a non-zero-extended number, but it can happen via ptrace. Instead of re-introducing the zero-extension, test what we are actually going to use, i.e. %rax. This only adds a handful of REX prefixes to the code. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@kernel.org> Cc: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org>
2010-09-14 19:42:41 +00:00
cmpq $(IA32_NR_syscalls-1),%rax
x86: ia32 ptrace vs -ENOSYS sysenter/syscall The previous "x86_64 ia32 ptrace vs -ENOSYS" fix only covered the int $0x80 system call entries. This does the same fix for the sysenter and syscall instruction paths. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-19 01:23:50 +00:00
ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jmp sysenter_do_call
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:55 +00:00
ENDPROC(ia32_sysenter_target)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* 32bit SYSCALL instruction entry.
*
* Arguments:
* %eax System call number.
* %ebx Arg1
* %ecx return EIP
* %edx Arg3
* %esi Arg4
* %edi Arg5
* %ebp Arg2 [note: not saved in the stack frame, should not be touched]
* %esp user stack
* 0(%esp) Arg6
*
* Interrupts off.
*
* This is purely a fast path. For anything complicated we use the int 0x80
* path below. Set up a complete hardware stack frame to share code
* with the int 0x80 path.
*/
ENTRY(ia32_cstar_target)
[PATCH] x86_64: More CFI fixes for 32bit entry code Frame unwind information was still incorrect for ia32_ptregs_common (sorry, my fault), and could be improved for some of the other entry points. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 21:41:59 +00:00
CFI_STARTPROC32 simple
[PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder Current gcc generates calls not jumps to noreturn functions. When that happens the return address can point to the next function, which confuses the unwinder. This patch works around it by marking asynchronous exception frames in contrast normal call frames in the unwind information. Then teach the unwinder to decode this. For normal call frames the unwinder now subtracts one from the address which avoids this problem. The standard libgcc unwinder uses the same trick. It doesn't include adjustment of the printed address (i.e. for the original example, it'd still be kernel_math_error+0 that gets displayed, but the unwinder wouldn't get confused anymore. This only works with binutils 2.6.17+ and some versions of H.J.Lu's 2.6.16 unfortunately because earlier binutils don't support .cfi_signal_frame [AK: added automatic detection of the new binutils and wrote description] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:41 +00:00
CFI_SIGNAL_FRAME
x86-64: Move kernelstack from PDA to per-cpu. Also clean up PER_CPU_VAR usage in xen-asm_64.S tj: * remove now unused stack_thread_info() * s/kernelstack/kernel_stack/ * added FIXME comment in xen-asm_64.S Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
CFI_DEF_CFA rsp,KERNEL_STACK_OFFSET
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
x86/paravirt: groundwork for 64-bit Xen support, fix Ingo Molnar wrote: > * Jeremy Fitzhardinge <jeremy@goop.org> wrote: > > >>> It quickly broke the build in testing: >>> >>> include/asm/pgalloc.h: In function ‘paravirt_pgd_free': >>> include/asm/pgalloc.h:14: error: parameter name omitted >>> arch/x86/kernel/entry_64.S: In file included from >>> arch/x86/kernel/traps_64.c:51:include/asm/pgalloc.h: In function >>> ‘paravirt_pgd_free': >>> include/asm/pgalloc.h:14: error: parameter name omitted >>> >>> >> No, looks like my fault. The non-PARAVIRT version of >> paravirt_pgd_free() is: >> >> static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *) {} >> >> but C doesn't like missing parameter names, even if unused. >> >> This should fix it: >> > > that fixed the build but now we've got a boot crash with this config: > > time.c: Detected 2010.304 MHz processor. > spurious 8259A interrupt: IRQ7. > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [<0000000000000000>] > PGD 0 > Thread overran stack, or stack corrupted > Oops: 0010 [1] SMP > CPU 0 > > with: > > http://redhat.com/~mingo/misc/config-Thu_Jun_26_12_46_46_CEST_2008.bad > Use SWAPGS_UNSAFE_STACK in ia32entry.S in the places where the active stack is the usermode stack. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-26 14:28:51 +00:00
SWAPGS_UNSAFE_STACK
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movl %esp,%r8d
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REGISTER rsp,r8
x86-64: Move kernelstack from PDA to per-cpu. Also clean up PER_CPU_VAR usage in xen-asm_64.S tj: * remove now unused stack_thread_info() * s/kernelstack/kernel_stack/ * added FIXME comment in xen-asm_64.S Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
movq PER_CPU_VAR(kernel_stack),%rsp
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
/*
* No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry:
*/
x86, 64-bit: ia32entry: replace privileged instructions with pvops Replace privileged instructions with the corresponding pvops in ia32entry.S. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:29 +00:00
ENABLE_INTERRUPTS(CLBR_NONE)
x86, asm: Flip SAVE_ARGS arguments logic This saves us the else part of the conditional statement in the macro. No functionality change. Signed-off-by: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1306873314-32523-3-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-05-31 20:21:52 +00:00
SAVE_ARGS 8,0,0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movl %eax,%eax /* zero extension */
movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
movq %rcx,RIP-ARGOFFSET(%rsp)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REL_OFFSET rip,RIP-ARGOFFSET
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movq %rbp,RCX-ARGOFFSET(%rsp) /* this lies slightly to ptrace */
movl %ebp,%ecx
movq $__USER32_CS,CS-ARGOFFSET(%rsp)
movq $__USER32_DS,SS-ARGOFFSET(%rsp)
movq %r11,EFLAGS-ARGOFFSET(%rsp)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
/*CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movq %r8,RSP-ARGOFFSET(%rsp)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REL_OFFSET rsp,RSP-ARGOFFSET
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* no need to do an access_ok check here because r8 has been
32bit zero extended */
/* hardware stack frame is complete now */
x86, smap: Add STAC and CLAC instructions to control user space access When Supervisor Mode Access Prevention (SMAP) is enabled, access to userspace from the kernel is controlled by the AC flag. To make the performance of manipulating that flag acceptable, there are two new instructions, STAC and CLAC, to set and clear it. This patch adds those instructions, via alternative(), when the SMAP feature is enabled. It also adds X86_EFLAGS_AC unconditionally to the SYSCALL entry mask; there is simply no reason to make that one conditional. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1348256595-29119-9-git-send-email-hpa@linux.intel.com
2012-09-21 19:43:12 +00:00
ASM_STAC
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
1: movl (%r8),%r9d
x86, extable: Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. This one was missed from the previous patch to this file. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
2012-04-20 23:51:50 +00:00
_ASM_EXTABLE(1b,ia32_badarg)
x86, smap: Add STAC and CLAC instructions to control user space access When Supervisor Mode Access Prevention (SMAP) is enabled, access to userspace from the kernel is controlled by the AC flag. To make the performance of manipulating that flag acceptable, there are two new instructions, STAC and CLAC, to set and clear it. This patch adds those instructions, via alternative(), when the SMAP feature is enabled. It also adds X86_EFLAGS_AC unconditionally to the SYSCALL entry mask; there is simply no reason to make that one conditional. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1348256595-29119-9-git-send-email-hpa@linux.intel.com
2012-09-21 19:43:12 +00:00
ASM_CLAC
x86-64: Slightly shorten line system call entry and exit paths GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:17:45 +00:00
orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REMEMBER_STATE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jnz cstar_tracesys
x86-64, compat: Test %rax for the syscall number, not %eax On 64 bits, we always, by necessity, jump through the system call table via %rax. For 32-bit system calls, in theory the system call number is stored in %eax, and the code was testing %eax for a valid system call number. At one point we loaded the stored value back from the stack to enforce zero-extension, but that was removed in checkin d4d67150165df8bf1cc05e532f6efca96f907cab. An actual 32-bit process will not be able to introduce a non-zero-extended number, but it can happen via ptrace. Instead of re-introducing the zero-extension, test what we are actually going to use, i.e. %rax. This only adds a handful of REX prefixes to the code. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@kernel.org> Cc: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org>
2010-09-14 19:42:41 +00:00
cmpq $IA32_NR_syscalls-1,%rax
[PATCH] x86_64: Eliminate IA32_NR_syscalls define Or rather compute it based on the table length automatically. This also has the intended side effect of not warning for new system calls anymore. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-07 17:50:31 +00:00
ja ia32_badsys
x86-64: slightly stream-line 32-bit syscall entry code Avoid updating registers or memory twice as well as needlessly loading or copying registers. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 12:21:11 +00:00
cstar_do_call:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
IA32_ARG_FIXUP 1
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
cstar_dispatch:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
call *ia32_sys_call_table(,%rax,8)
movq %rax,RAX-ARGOFFSET(%rsp)
x86, 64-bit: ia32entry: replace privileged instructions with pvops Replace privileged instructions with the corresponding pvops in ia32entry.S. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:29 +00:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_OFF
x86-64: Slightly shorten line system call entry and exit paths GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:17:45 +00:00
testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
jnz sysretl_audit
sysretl_from_sys_call:
x86-64: Slightly shorten line system call entry and exit paths GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:17:45 +00:00
andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
x86, asm: Flip RESTORE_ARGS arguments logic ... thus getting rid of the "else" part of the conditional statement in the macro. No functionality change. Signed-off-by: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1306873314-32523-4-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-05-31 20:21:53 +00:00
RESTORE_ARGS 0,-ARG_SKIP,0,0,0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movl RIP-ARGOFFSET(%rsp),%ecx
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REGISTER rip,rcx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movl EFLAGS-ARGOFFSET(%rsp),%r11d
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
/*CFI_REGISTER rflags,r11*/
x86: Don't leak 64-bit kernel register values to 32-bit processes While 32-bit processes can't directly access R8...R15, they can gain access to these registers by temporarily switching themselves into 64-bit mode. Therefore, registers not preserved anyway by called C functions (i.e. R8...R11) must be cleared prior to returning to user mode. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> LKML-Reference: <4AC34D73020000780001744A@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-30 10:22:11 +00:00
xorq %r10,%r10
xorq %r9,%r9
xorq %r8,%r8
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_ON
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movl RSP-ARGOFFSET(%rsp),%esp
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_RESTORE rsp
x86/paravirt: add sysret/sysexit pvops for returning to 32-bit compatibility userspace In a 64-bit system, we need separate sysret/sysexit operations to return to a 32-bit userspace. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:28 +00:00
USERGS_SYSRET32
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
#ifdef CONFIG_AUDITSYSCALL
cstar_auditsys:
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_RESTORE_STATE
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
movl %r9d,R9-ARGOFFSET(%rsp) /* register to be clobbered by call */
auditsys_entry_common
movl R9-ARGOFFSET(%rsp),%r9d /* reload 6th syscall arg */
jmp cstar_dispatch
sysretl_audit:
x86-64: Fix register leak in 32-bit syscall audting Restoring %ebp after the call to audit_syscall_exit() is not only unnecessary (because the register didn't get clobbered), but in the sysenter case wasn't even doing the right thing: It loaded %ebp from a location below the top of stack (RBP < ARGOFFSET), i.e. arbitrary kernel data got passed back to user mode in the register. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: <stable@kernel.org> LKML-Reference: <4AE5CC4D020000780001BD13@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:20:29 +00:00
auditsys_exit sysretl_from_sys_call
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
#endif
cstar_tracesys:
#ifdef CONFIG_AUDITSYSCALL
x86-64: Slightly shorten line system call entry and exit paths GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:17:45 +00:00
testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 08:13:31 +00:00
jz cstar_auditsys
#endif
x86 - 32-bit ptrace emulation mishandles 6th arg [ jdike - Pushing Chuck's patch - see http://lkml.org/lkml/2005/9/16/261 for some history and a test program. UML is also broken without this patch - its processes get SIGBUS from the corrupt 6th argument to mmap being interpretted as a file offset ] When the 32-bit vDSO is used to make a system call, the %ebp register for the 6th syscall arg has to be loaded from the user stack (where it's pushed by the vDSO user code). The native i386 kernel always does this before stopping for syscall tracing, so %ebp can be seen and modified via ptrace to access the 6th syscall argument. The x86-64 kernel fails to do this, presenting the stack address to ptrace instead. This makes the %rbp value seen by 64-bit ptrace of a 32-bit process, and the %ebp value seen by a 32-bit caller of ptrace, both differ from the native i386 behavior. This patch fixes the problem by putting the word loaded from the user stack into %rbp before calling syscall_trace_enter, and reloading the 6th syscall argument from there afterwards (so ptrace can change it). This makes the behavior match that of i386 kernels. Original-Patch-By: Roland McGrath <roland@redhat.com> Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-07 15:48:39 +00:00
xchgl %r9d,%ebp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
SAVE_REST
x86: Don't leak 64-bit kernel register values to 32-bit processes While 32-bit processes can't directly access R8...R15, they can gain access to these registers by temporarily switching themselves into 64-bit mode. Therefore, registers not preserved anyway by called C functions (i.e. R8...R11) must be cleared prior to returning to user mode. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> LKML-Reference: <4AC34D73020000780001744A@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-30 10:22:11 +00:00
CLEAR_RREGS 0, r9
x86: ia32 ptrace vs -ENOSYS sysenter/syscall The previous "x86_64 ia32 ptrace vs -ENOSYS" fix only covered the int $0x80 system call entries. This does the same fix for the sysenter and syscall instruction paths. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-19 01:23:50 +00:00
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
x86-64: slightly stream-line 32-bit syscall entry code Avoid updating registers or memory twice as well as needlessly loading or copying registers. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 12:21:11 +00:00
LOAD_ARGS32 ARGOFFSET, 1 /* reload args from stack in case ptrace changed it */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
RESTORE_REST
x86 - 32-bit ptrace emulation mishandles 6th arg [ jdike - Pushing Chuck's patch - see http://lkml.org/lkml/2005/9/16/261 for some history and a test program. UML is also broken without this patch - its processes get SIGBUS from the corrupt 6th argument to mmap being interpretted as a file offset ] When the 32-bit vDSO is used to make a system call, the %ebp register for the 6th syscall arg has to be loaded from the user stack (where it's pushed by the vDSO user code). The native i386 kernel always does this before stopping for syscall tracing, so %ebp can be seen and modified via ptrace to access the 6th syscall argument. The x86-64 kernel fails to do this, presenting the stack address to ptrace instead. This makes the %rbp value seen by 64-bit ptrace of a 32-bit process, and the %ebp value seen by a 32-bit caller of ptrace, both differ from the native i386 behavior. This patch fixes the problem by putting the word loaded from the user stack into %rbp before calling syscall_trace_enter, and reloading the 6th syscall argument from there afterwards (so ptrace can change it). This makes the behavior match that of i386 kernels. Original-Patch-By: Roland McGrath <roland@redhat.com> Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-07 15:48:39 +00:00
xchgl %ebp,%r9d
x86-64, compat: Test %rax for the syscall number, not %eax On 64 bits, we always, by necessity, jump through the system call table via %rax. For 32-bit system calls, in theory the system call number is stored in %eax, and the code was testing %eax for a valid system call number. At one point we loaded the stored value back from the stack to enforce zero-extension, but that was removed in checkin d4d67150165df8bf1cc05e532f6efca96f907cab. An actual 32-bit process will not be able to introduce a non-zero-extended number, but it can happen via ptrace. Instead of re-introducing the zero-extension, test what we are actually going to use, i.e. %rax. This only adds a handful of REX prefixes to the code. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@kernel.org> Cc: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org>
2010-09-14 19:42:41 +00:00
cmpq $(IA32_NR_syscalls-1),%rax
x86: ia32 ptrace vs -ENOSYS sysenter/syscall The previous "x86_64 ia32 ptrace vs -ENOSYS" fix only covered the int $0x80 system call entries. This does the same fix for the sysenter and syscall instruction paths. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-19 01:23:50 +00:00
ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jmp cstar_do_call
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:55 +00:00
END(ia32_cstar_target)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ia32_badarg:
x86, smap: Add STAC and CLAC instructions to control user space access When Supervisor Mode Access Prevention (SMAP) is enabled, access to userspace from the kernel is controlled by the AC flag. To make the performance of manipulating that flag acceptable, there are two new instructions, STAC and CLAC, to set and clear it. This patch adds those instructions, via alternative(), when the SMAP feature is enabled. It also adds X86_EFLAGS_AC unconditionally to the SYSCALL entry mask; there is simply no reason to make that one conditional. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1348256595-29119-9-git-send-email-hpa@linux.intel.com
2012-09-21 19:43:12 +00:00
ASM_CLAC
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movq $-EFAULT,%rax
jmp ia32_sysret
CFI_ENDPROC
/*
* Emulated IA32 system calls via int 0x80.
*
* Arguments:
* %eax System call number.
* %ebx Arg1
* %ecx Arg2
* %edx Arg3
* %esi Arg4
* %edi Arg5
* %ebp Arg6 [note: not saved in the stack frame, should not be touched]
*
* Notes:
* Uses the same stack frame as the x86-64 version.
* All registers except %eax must be saved (but ptrace may violate that)
* Arguments are zero extended. For system calls that want sign extension and
* take long arguments a wrapper is needed. Most calls can just be called
* directly.
* Assumes it is only called from user space and entered with interrupts off.
*/
ENTRY(ia32_syscall)
x86_64: ia32entry adjustments Consolidate the three 32-bit system call entry points so that they all treat registers in similar ways. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21 15:10:20 +00:00
CFI_STARTPROC32 simple
[PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder Current gcc generates calls not jumps to noreturn functions. When that happens the return address can point to the next function, which confuses the unwinder. This patch works around it by marking asynchronous exception frames in contrast normal call frames in the unwind information. Then teach the unwinder to decode this. For normal call frames the unwinder now subtracts one from the address which avoids this problem. The standard libgcc unwinder uses the same trick. It doesn't include adjustment of the printed address (i.e. for the original example, it'd still be kernel_math_error+0 that gets displayed, but the unwinder wouldn't get confused anymore. This only works with binutils 2.6.17+ and some versions of H.J.Lu's 2.6.16 unfortunately because earlier binutils don't support .cfi_signal_frame [AK: added automatic detection of the new binutils and wrote description] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:41 +00:00
CFI_SIGNAL_FRAME
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_DEF_CFA rsp,SS+8-RIP
/*CFI_REL_OFFSET ss,SS-RIP*/
CFI_REL_OFFSET rsp,RSP-RIP
/*CFI_REL_OFFSET rflags,EFLAGS-RIP*/
/*CFI_REL_OFFSET cs,CS-RIP*/
CFI_REL_OFFSET rip,RIP-RIP
x86_64: adjust exception frame in ia32entry The 32-bit compat int $0x80 entrypoint needs exception frame adjustment. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:28 +00:00
PARAVIRT_ADJUST_EXCEPTION_FRAME
x86, 64-bit: ia32entry: replace privileged instructions with pvops Replace privileged instructions with the corresponding pvops in ia32entry.S. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:29 +00:00
SWAPGS
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
/*
* No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry:
*/
x86, 64-bit: ia32entry: replace privileged instructions with pvops Replace privileged instructions with the corresponding pvops in ia32entry.S. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:29 +00:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movl %eax,%eax
x86: Use {push,pop}_cfi in more places Cleaning up and shortening code... Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Alexander van Heukelum <heukelum@fastmail.fm> LKML-Reference: <4D6BD35002000078000341DA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28 15:54:40 +00:00
pushq_cfi %rax
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
cld
/* note the registers are not zero extended to the sf.
this could be a problem. */
x86, asm: Flip SAVE_ARGS arguments logic This saves us the else part of the conditional statement in the macro. No functionality change. Signed-off-by: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1306873314-32523-3-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-05-31 20:21:52 +00:00
SAVE_ARGS 0,1,0
x86-64: Slightly shorten line system call entry and exit paths GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:17:45 +00:00
orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jnz ia32_tracesys
x86-64, compat: Test %rax for the syscall number, not %eax On 64 bits, we always, by necessity, jump through the system call table via %rax. For 32-bit system calls, in theory the system call number is stored in %eax, and the code was testing %eax for a valid system call number. At one point we loaded the stored value back from the stack to enforce zero-extension, but that was removed in checkin d4d67150165df8bf1cc05e532f6efca96f907cab. An actual 32-bit process will not be able to introduce a non-zero-extended number, but it can happen via ptrace. Instead of re-introducing the zero-extension, test what we are actually going to use, i.e. %rax. This only adds a handful of REX prefixes to the code. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@kernel.org> Cc: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org>
2010-09-14 19:42:41 +00:00
cmpq $(IA32_NR_syscalls-1),%rax
x86-64: fix int $0x80 -ENOSYS return One of my past fixes to this code introduced a different new bug. When using 32-bit "int $0x80" entry for a bogus syscall number, the return value is not correctly set to -ENOSYS. This only happens when neither syscall-audit nor syscall tracing is enabled (i.e., never seen if auditd ever started). Test program: /* gcc -o int80-badsys -m32 -g int80-badsys.c Run on x86-64 kernel. Note to reproduce the bug you need auditd never to have started. */ #include <errno.h> #include <stdio.h> int main (void) { long res; asm ("int $0x80" : "=a" (res) : "0" (99999)); printf ("bad syscall returns %ld\n", res); return res != -ENOSYS; } The fix makes the int $0x80 path match the sysenter and syscall paths. Reported-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Roland McGrath <roland@redhat.com>
2009-02-07 02:15:18 +00:00
ja ia32_badsys
ia32_do_call:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
IA32_ARG_FIXUP
call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
ia32_sysret:
movq %rax,RAX-ARGOFFSET(%rsp)
x86: Don't leak 64-bit kernel register values to 32-bit processes While 32-bit processes can't directly access R8...R15, they can gain access to these registers by temporarily switching themselves into 64-bit mode. Therefore, registers not preserved anyway by called C functions (i.e. R8...R11) must be cleared prior to returning to user mode. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> LKML-Reference: <4AC34D73020000780001744A@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-30 10:22:11 +00:00
ia32_ret_from_sys_call:
CLEAR_RREGS -ARGOFFSET
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jmp int_ret_from_sys_call
ia32_tracesys:
SAVE_REST
x86_64: ia32entry adjustments Consolidate the three 32-bit system call entry points so that they all treat registers in similar ways. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21 15:10:20 +00:00
CLEAR_RREGS
x86: ia32 ptrace vs -ENOSYS When we're stopped at syscall entry tracing, ptrace can change the %eax value from -ENOSYS to something else. If no system call is actually made because the syscall number (now in orig_eax) is bad, then the %eax value set by ptrace should be returned to the user. But, instead it gets reset to -ENOSYS again. This is a regression from the native 32-bit kernel. This change fixes it by leaving the return value alone after entry tracing. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-17 04:57:41 +00:00
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
x86_64: Zero extend all registers after ptrace in 32bit entry path. Strictly it's only needed for eax. It actually does a little more than strictly needed -- the other registers are already zero extended. Also remove the now unnecessary and non functional compat task check in ptrace. This is CVE-2007-4573 Found by Wojciech Purczynski Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-21 14:16:18 +00:00
LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
RESTORE_REST
x86-64, compat: Test %rax for the syscall number, not %eax On 64 bits, we always, by necessity, jump through the system call table via %rax. For 32-bit system calls, in theory the system call number is stored in %eax, and the code was testing %eax for a valid system call number. At one point we loaded the stored value back from the stack to enforce zero-extension, but that was removed in checkin d4d67150165df8bf1cc05e532f6efca96f907cab. An actual 32-bit process will not be able to introduce a non-zero-extended number, but it can happen via ptrace. Instead of re-introducing the zero-extension, test what we are actually going to use, i.e. %rax. This only adds a handful of REX prefixes to the code. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@kernel.org> Cc: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org>
2010-09-14 19:42:41 +00:00
cmpq $(IA32_NR_syscalls-1),%rax
x86-64: fix int $0x80 -ENOSYS return One of my past fixes to this code introduced a different new bug. When using 32-bit "int $0x80" entry for a bogus syscall number, the return value is not correctly set to -ENOSYS. This only happens when neither syscall-audit nor syscall tracing is enabled (i.e., never seen if auditd ever started). Test program: /* gcc -o int80-badsys -m32 -g int80-badsys.c Run on x86-64 kernel. Note to reproduce the bug you need auditd never to have started. */ #include <errno.h> #include <stdio.h> int main (void) { long res; asm ("int $0x80" : "=a" (res) : "0" (99999)); printf ("bad syscall returns %ld\n", res); return res != -ENOSYS; } The fix makes the int $0x80 path match the sysenter and syscall paths. Reported-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Roland McGrath <roland@redhat.com>
2009-02-07 02:15:18 +00:00
ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */
jmp ia32_do_call
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:55 +00:00
END(ia32_syscall)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ia32_badsys:
movq $0,ORIG_RAX-ARGOFFSET(%rsp)
x86: Don't leak 64-bit kernel register values to 32-bit processes While 32-bit processes can't directly access R8...R15, they can gain access to these registers by temporarily switching themselves into 64-bit mode. Therefore, registers not preserved anyway by called C functions (i.e. R8...R11) must be cleared prior to returning to user mode. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> LKML-Reference: <4AC34D73020000780001744A@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-30 10:22:11 +00:00
movq $-ENOSYS,%rax
jmp ia32_sysret
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CFI_ENDPROC
.macro PTREGSCALL label, func, arg
x86-64: Cleanup some assembly entry points system_call_after_swapgs doesn't really benefit from forcing alignment from it - quite the opposite, native code needlessly so far got a big NOP instruction inserted in front of it. Xen being the only user of the separate entry point can well live with the branch going to three bytes into a cache line. The compatibility mode ptregs entry points for one can make use of the GLOBAL() macro, and should be suitably aligned. Their shared continuation point (ia32_ptregs_common) otoh doesn't need to be global at all, but should continue to be properly aligned. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CEEA020000780006407D@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:24:10 +00:00
ALIGN
GLOBAL(\label)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
leaq \func(%rip),%rax
leaq -ARGOFFSET+8(%rsp),\arg /* 8 for return address */
jmp ia32_ptregs_common
.endm
[PATCH] x86_64: More CFI fixes for 32bit entry code Frame unwind information was still incorrect for ia32_ptregs_common (sorry, my fault), and could be improved for some of the other entry points. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 21:41:59 +00:00
CFI_STARTPROC32
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn, %rdi
PTREGSCALL stub32_sigreturn, sys32_sigreturn, %rdi
x86, um/x86: switch to generic sys_execve and kernel_execve 32bit wrapper is lost on that; 64bit one is *not*, since we need to arrange for full pt_regs on stack when we call sys_execve() and we need to load callee-saved ones from there afterwards. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-02 19:05:11 +00:00
PTREGSCALL stub32_execve, compat_sys_execve, %rcx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PTREGSCALL stub32_fork, sys_fork, %rdi
PTREGSCALL stub32_vfork, sys_vfork, %rdi
PTREGSCALL stub32_iopl, sys_iopl, %rsi
x86, um: switch to generic fork/vfork/clone Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-23 02:34:11 +00:00
ALIGN
GLOBAL(stub32_clone)
leaq sys_clone(%rip),%rax
mov %r8, %rcx
jmp ia32_ptregs_common
x86-64: Cleanup some assembly entry points system_call_after_swapgs doesn't really benefit from forcing alignment from it - quite the opposite, native code needlessly so far got a big NOP instruction inserted in front of it. Xen being the only user of the separate entry point can well live with the branch going to three bytes into a cache line. The compatibility mode ptregs entry points for one can make use of the GLOBAL() macro, and should be suitably aligned. Their shared continuation point (ia32_ptregs_common) otoh doesn't need to be global at all, but should continue to be properly aligned. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CEEA020000780006407D@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-29 11:24:10 +00:00
ALIGN
ia32_ptregs_common:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
popq %r11
[PATCH] x86_64: More CFI fixes for 32bit entry code Frame unwind information was still incorrect for ia32_ptregs_common (sorry, my fault), and could be improved for some of the other entry points. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 21:41:59 +00:00
CFI_ENDPROC
CFI_STARTPROC32 simple
[PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder Current gcc generates calls not jumps to noreturn functions. When that happens the return address can point to the next function, which confuses the unwinder. This patch works around it by marking asynchronous exception frames in contrast normal call frames in the unwind information. Then teach the unwinder to decode this. For normal call frames the unwinder now subtracts one from the address which avoids this problem. The standard libgcc unwinder uses the same trick. It doesn't include adjustment of the printed address (i.e. for the original example, it'd still be kernel_math_error+0 that gets displayed, but the unwinder wouldn't get confused anymore. This only works with binutils 2.6.17+ and some versions of H.J.Lu's 2.6.16 unfortunately because earlier binutils don't support .cfi_signal_frame [AK: added automatic detection of the new binutils and wrote description] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:41 +00:00
CFI_SIGNAL_FRAME
[PATCH] x86_64: More CFI fixes for 32bit entry code Frame unwind information was still incorrect for ia32_ptregs_common (sorry, my fault), and could be improved for some of the other entry points. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 21:41:59 +00:00
CFI_DEF_CFA rsp,SS+8-ARGOFFSET
CFI_REL_OFFSET rax,RAX-ARGOFFSET
CFI_REL_OFFSET rcx,RCX-ARGOFFSET
CFI_REL_OFFSET rdx,RDX-ARGOFFSET
CFI_REL_OFFSET rsi,RSI-ARGOFFSET
CFI_REL_OFFSET rdi,RDI-ARGOFFSET
CFI_REL_OFFSET rip,RIP-ARGOFFSET
/* CFI_REL_OFFSET cs,CS-ARGOFFSET*/
/* CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/
CFI_REL_OFFSET rsp,RSP-ARGOFFSET
/* CFI_REL_OFFSET ss,SS-ARGOFFSET*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
SAVE_REST
call *%rax
RESTORE_REST
jmp ia32_sysret /* misbalances the return cache */
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:55 +00:00
END(ia32_ptregs_common)