dect
/
linux-2.6
Archived
13
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/rtc/rtc-ds1286.c

406 lines
10 KiB
C
Raw Normal View History

/*
* DS1286 Real Time Clock interface for Linux
*
* Copyright (C) 1998, 1999, 2000 Ralf Baechle
* Copyright (C) 2008 Thomas Bogendoerfer
*
* Based on code written by Paul Gortmaker.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/bcd.h>
#include <linux/ds1286.h>
#include <linux/io.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#define DRV_VERSION "1.0"
struct ds1286_priv {
struct rtc_device *rtc;
u32 __iomem *rtcregs;
size_t size;
unsigned long baseaddr;
spinlock_t lock;
};
static inline u8 ds1286_rtc_read(struct ds1286_priv *priv, int reg)
{
return __raw_readl(&priv->rtcregs[reg]) & 0xff;
}
static inline void ds1286_rtc_write(struct ds1286_priv *priv, u8 data, int reg)
{
__raw_writel(data, &priv->rtcregs[reg]);
}
static int ds1286_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned long flags;
unsigned char val;
/* Allow or mask alarm interrupts */
spin_lock_irqsave(&priv->lock, flags);
val = ds1286_rtc_read(priv, RTC_CMD);
if (enabled)
val &= ~RTC_TDM;
else
val |= RTC_TDM;
ds1286_rtc_write(priv, val, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
#ifdef CONFIG_RTC_INTF_DEV
static int ds1286_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned long flags;
unsigned char val;
switch (cmd) {
case RTC_WIE_OFF:
/* Mask watchdog int. enab. bit */
spin_lock_irqsave(&priv->lock, flags);
val = ds1286_rtc_read(priv, RTC_CMD);
val |= RTC_WAM;
ds1286_rtc_write(priv, val, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
break;
case RTC_WIE_ON:
/* Allow watchdog interrupts. */
spin_lock_irqsave(&priv->lock, flags);
val = ds1286_rtc_read(priv, RTC_CMD);
val &= ~RTC_WAM;
ds1286_rtc_write(priv, val, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
break;
default:
return -ENOIOCTLCMD;
}
return 0;
}
#else
#define ds1286_ioctl NULL
#endif
#ifdef CONFIG_PROC_FS
static int ds1286_proc(struct device *dev, struct seq_file *seq)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned char month, cmd, amode;
const char *s;
month = ds1286_rtc_read(priv, RTC_MONTH);
seq_printf(seq,
"oscillator\t: %s\n"
"square_wave\t: %s\n",
(month & RTC_EOSC) ? "disabled" : "enabled",
(month & RTC_ESQW) ? "disabled" : "enabled");
amode = ((ds1286_rtc_read(priv, RTC_MINUTES_ALARM) & 0x80) >> 5) |
((ds1286_rtc_read(priv, RTC_HOURS_ALARM) & 0x80) >> 6) |
((ds1286_rtc_read(priv, RTC_DAY_ALARM) & 0x80) >> 7);
switch (amode) {
case 7:
s = "each minute";
break;
case 3:
s = "minutes match";
break;
case 1:
s = "hours and minutes match";
break;
case 0:
s = "days, hours and minutes match";
break;
default:
s = "invalid";
break;
}
seq_printf(seq, "alarm_mode\t: %s\n", s);
cmd = ds1286_rtc_read(priv, RTC_CMD);
seq_printf(seq,
"alarm_enable\t: %s\n"
"wdog_alarm\t: %s\n"
"alarm_mask\t: %s\n"
"wdog_alarm_mask\t: %s\n"
"interrupt_mode\t: %s\n"
"INTB_mode\t: %s_active\n"
"interrupt_pins\t: %s\n",
(cmd & RTC_TDF) ? "yes" : "no",
(cmd & RTC_WAF) ? "yes" : "no",
(cmd & RTC_TDM) ? "disabled" : "enabled",
(cmd & RTC_WAM) ? "disabled" : "enabled",
(cmd & RTC_PU_LVL) ? "pulse" : "level",
(cmd & RTC_IBH_LO) ? "low" : "high",
(cmd & RTC_IPSW) ? "unswapped" : "swapped");
return 0;
}
#else
#define ds1286_proc NULL
#endif
static int ds1286_read_time(struct device *dev, struct rtc_time *tm)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned char save_control;
unsigned long flags;
unsigned long uip_watchdog = jiffies;
/*
* read RTC once any update in progress is done. The update
* can take just over 2ms. We wait 10 to 20ms. There is no need to
* to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
* If you need to know *exactly* when a second has started, enable
* periodic update complete interrupts, (via ioctl) and then
* immediately read /dev/rtc which will block until you get the IRQ.
* Once the read clears, read the RTC time (again via ioctl). Easy.
*/
if (ds1286_rtc_read(priv, RTC_CMD) & RTC_TE)
while (time_before(jiffies, uip_watchdog + 2*HZ/100))
barrier();
/*
* Only the values that we read from the RTC are set. We leave
* tm_wday, tm_yday and tm_isdst untouched. Even though the
* RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
* by the RTC when initially set to a non-zero value.
*/
spin_lock_irqsave(&priv->lock, flags);
save_control = ds1286_rtc_read(priv, RTC_CMD);
ds1286_rtc_write(priv, (save_control|RTC_TE), RTC_CMD);
tm->tm_sec = ds1286_rtc_read(priv, RTC_SECONDS);
tm->tm_min = ds1286_rtc_read(priv, RTC_MINUTES);
tm->tm_hour = ds1286_rtc_read(priv, RTC_HOURS) & 0x3f;
tm->tm_mday = ds1286_rtc_read(priv, RTC_DATE);
tm->tm_mon = ds1286_rtc_read(priv, RTC_MONTH) & 0x1f;
tm->tm_year = ds1286_rtc_read(priv, RTC_YEAR);
ds1286_rtc_write(priv, save_control, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
tm->tm_sec = bcd2bin(tm->tm_sec);
tm->tm_min = bcd2bin(tm->tm_min);
tm->tm_hour = bcd2bin(tm->tm_hour);
tm->tm_mday = bcd2bin(tm->tm_mday);
tm->tm_mon = bcd2bin(tm->tm_mon);
tm->tm_year = bcd2bin(tm->tm_year);
/*
* Account for differences between how the RTC uses the values
* and how they are defined in a struct rtc_time;
*/
if (tm->tm_year < 45)
tm->tm_year += 30;
tm->tm_year += 40;
if (tm->tm_year < 70)
tm->tm_year += 100;
tm->tm_mon--;
return rtc_valid_tm(tm);
}
static int ds1286_set_time(struct device *dev, struct rtc_time *tm)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned char mon, day, hrs, min, sec;
unsigned char save_control;
unsigned int yrs;
unsigned long flags;
yrs = tm->tm_year + 1900;
mon = tm->tm_mon + 1; /* tm_mon starts at zero */
day = tm->tm_mday;
hrs = tm->tm_hour;
min = tm->tm_min;
sec = tm->tm_sec;
if (yrs < 1970)
return -EINVAL;
yrs -= 1940;
if (yrs > 255) /* They are unsigned */
return -EINVAL;
if (yrs >= 100)
yrs -= 100;
sec = bin2bcd(sec);
min = bin2bcd(min);
hrs = bin2bcd(hrs);
day = bin2bcd(day);
mon = bin2bcd(mon);
yrs = bin2bcd(yrs);
spin_lock_irqsave(&priv->lock, flags);
save_control = ds1286_rtc_read(priv, RTC_CMD);
ds1286_rtc_write(priv, (save_control|RTC_TE), RTC_CMD);
ds1286_rtc_write(priv, yrs, RTC_YEAR);
ds1286_rtc_write(priv, mon, RTC_MONTH);
ds1286_rtc_write(priv, day, RTC_DATE);
ds1286_rtc_write(priv, hrs, RTC_HOURS);
ds1286_rtc_write(priv, min, RTC_MINUTES);
ds1286_rtc_write(priv, sec, RTC_SECONDS);
ds1286_rtc_write(priv, 0, RTC_HUNDREDTH_SECOND);
ds1286_rtc_write(priv, save_control, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
static int ds1286_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned char cmd;
unsigned long flags;
/*
* Only the values that we read from the RTC are set. That
* means only tm_wday, tm_hour, tm_min.
*/
spin_lock_irqsave(&priv->lock, flags);
alm->time.tm_min = ds1286_rtc_read(priv, RTC_MINUTES_ALARM) & 0x7f;
alm->time.tm_hour = ds1286_rtc_read(priv, RTC_HOURS_ALARM) & 0x1f;
alm->time.tm_wday = ds1286_rtc_read(priv, RTC_DAY_ALARM) & 0x07;
cmd = ds1286_rtc_read(priv, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
alm->time.tm_min = bcd2bin(alm->time.tm_min);
alm->time.tm_hour = bcd2bin(alm->time.tm_hour);
alm->time.tm_sec = 0;
return 0;
}
static int ds1286_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned char hrs, min, sec;
hrs = alm->time.tm_hour;
min = alm->time.tm_min;
sec = alm->time.tm_sec;
if (hrs >= 24)
hrs = 0xff;
if (min >= 60)
min = 0xff;
if (sec != 0)
return -EINVAL;
min = bin2bcd(min);
hrs = bin2bcd(hrs);
spin_lock(&priv->lock);
ds1286_rtc_write(priv, hrs, RTC_HOURS_ALARM);
ds1286_rtc_write(priv, min, RTC_MINUTES_ALARM);
spin_unlock(&priv->lock);
return 0;
}
static const struct rtc_class_ops ds1286_ops = {
.ioctl = ds1286_ioctl,
.proc = ds1286_proc,
.read_time = ds1286_read_time,
.set_time = ds1286_set_time,
.read_alarm = ds1286_read_alarm,
.set_alarm = ds1286_set_alarm,
.alarm_irq_enable = ds1286_alarm_irq_enable,
};
static int ds1286_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct resource *res;
struct ds1286_priv *priv;
int ret = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
priv = kzalloc(sizeof(struct ds1286_priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->size = resource_size(res);
if (!request_mem_region(res->start, priv->size, pdev->name)) {
ret = -EBUSY;
goto out;
}
priv->baseaddr = res->start;
priv->rtcregs = ioremap(priv->baseaddr, priv->size);
if (!priv->rtcregs) {
ret = -ENOMEM;
goto out;
}
spin_lock_init(&priv->lock);
platform_set_drvdata(pdev, priv);
rtc = rtc_device_register("ds1286", &pdev->dev,
&ds1286_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
ret = PTR_ERR(rtc);
goto out;
}
priv->rtc = rtc;
return 0;
out:
if (priv->rtc)
rtc_device_unregister(priv->rtc);
if (priv->rtcregs)
iounmap(priv->rtcregs);
if (priv->baseaddr)
release_mem_region(priv->baseaddr, priv->size);
kfree(priv);
return ret;
}
static int ds1286_remove(struct platform_device *pdev)
{
struct ds1286_priv *priv = platform_get_drvdata(pdev);
rtc_device_unregister(priv->rtc);
iounmap(priv->rtcregs);
release_mem_region(priv->baseaddr, priv->size);
kfree(priv);
return 0;
}
static struct platform_driver ds1286_platform_driver = {
.driver = {
.name = "rtc-ds1286",
.owner = THIS_MODULE,
},
.probe = ds1286_probe,
.remove = ds1286_remove,
};
module_platform_driver(ds1286_platform_driver);
MODULE_AUTHOR("Thomas Bogendoerfer <tsbogend@alpha.franken.de>");
MODULE_DESCRIPTION("DS1286 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("platform:rtc-ds1286");