dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/devfreq/governor.h

42 lines
1.3 KiB
C
Raw Normal View History

PM: Introduce devfreq: generic DVFS framework with device-specific OPPs With OPPs, a device may have multiple operable frequency and voltage sets. However, there can be multiple possible operable sets and a system will need to choose one from them. In order to reduce the power consumption (by reducing frequency and voltage) without affecting the performance too much, a Dynamic Voltage and Frequency Scaling (DVFS) scheme may be used. This patch introduces the DVFS capability to non-CPU devices with OPPs. DVFS is a techique whereby the frequency and supplied voltage of a device is adjusted on-the-fly. DVFS usually sets the frequency as low as possible with given conditions (such as QoS assurance) and adjusts voltage according to the chosen frequency in order to reduce power consumption and heat dissipation. The generic DVFS for devices, devfreq, may appear quite similar with /drivers/cpufreq. However, cpufreq does not allow to have multiple devices registered and is not suitable to have multiple heterogenous devices with different (but simple) governors. Normally, DVFS mechanism controls frequency based on the demand for the device, and then, chooses voltage based on the chosen frequency. devfreq also controls the frequency based on the governor's frequency recommendation and let OPP pick up the pair of frequency and voltage based on the recommended frequency. Then, the chosen OPP is passed to device driver's "target" callback. When PM QoS is going to be used with the devfreq device, the device driver should enable OPPs that are appropriate with the current PM QoS requests. In order to do so, the device driver may call opp_enable and opp_disable at the notifier callback of PM QoS so that PM QoS's update_target() call enables the appropriate OPPs. Note that at least one of OPPs should be enabled at any time; be careful when there is a transition. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mike Turquette <mturquette@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-01 22:19:15 +00:00
/*
* governor.h - internal header for devfreq governors.
*
* Copyright (C) 2011 Samsung Electronics
* MyungJoo Ham <myungjoo.ham@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This header is for devfreq governors in drivers/devfreq/
*/
#ifndef _GOVERNOR_H
#define _GOVERNOR_H
#include <linux/devfreq.h>
#define to_devfreq(DEV) container_of((DEV), struct devfreq, dev)
PM / devfreq: Core updates to support devices which can idle Prepare devfreq core framework to support devices which can idle. When device idleness is detected perhaps through runtime-pm, need some mechanism to suspend devfreq load monitoring and resume back when device is online. Present code continues monitoring unless device is removed from devfreq core. This patch introduces following design changes, - use per device work instead of global work to monitor device load. This enables suspend/resume of device devfreq and reduces monitoring code complexity. - decouple delayed work based load monitoring logic from core by introducing helpers functions to be used by governors. This provides flexibility for governors either to use delayed work based monitoring functions or to implement their own mechanism. - devfreq core interacts with governors via events to perform specific actions. These events include start/stop devfreq. This sets ground for adding suspend/resume events. The devfreq apis are not modified and are kept intact. Signed-off-by: Rajagopal Venkat <rajagopal.venkat@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-25 23:50:09 +00:00
/* Devfreq events */
#define DEVFREQ_GOV_START 0x1
#define DEVFREQ_GOV_STOP 0x2
#define DEVFREQ_GOV_INTERVAL 0x3
PM / devfreq: Add suspend and resume apis Add devfreq suspend/resume apis for devfreq users. This patch supports suspend and resume of devfreq load monitoring, required for devices which can idle. Signed-off-by: Rajagopal Venkat <rajagopal.venkat@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-25 23:50:18 +00:00
#define DEVFREQ_GOV_SUSPEND 0x4
#define DEVFREQ_GOV_RESUME 0x5
PM / devfreq: Core updates to support devices which can idle Prepare devfreq core framework to support devices which can idle. When device idleness is detected perhaps through runtime-pm, need some mechanism to suspend devfreq load monitoring and resume back when device is online. Present code continues monitoring unless device is removed from devfreq core. This patch introduces following design changes, - use per device work instead of global work to monitor device load. This enables suspend/resume of device devfreq and reduces monitoring code complexity. - decouple delayed work based load monitoring logic from core by introducing helpers functions to be used by governors. This provides flexibility for governors either to use delayed work based monitoring functions or to implement their own mechanism. - devfreq core interacts with governors via events to perform specific actions. These events include start/stop devfreq. This sets ground for adding suspend/resume events. The devfreq apis are not modified and are kept intact. Signed-off-by: Rajagopal Venkat <rajagopal.venkat@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-25 23:50:09 +00:00
PM: Introduce devfreq: generic DVFS framework with device-specific OPPs With OPPs, a device may have multiple operable frequency and voltage sets. However, there can be multiple possible operable sets and a system will need to choose one from them. In order to reduce the power consumption (by reducing frequency and voltage) without affecting the performance too much, a Dynamic Voltage and Frequency Scaling (DVFS) scheme may be used. This patch introduces the DVFS capability to non-CPU devices with OPPs. DVFS is a techique whereby the frequency and supplied voltage of a device is adjusted on-the-fly. DVFS usually sets the frequency as low as possible with given conditions (such as QoS assurance) and adjusts voltage according to the chosen frequency in order to reduce power consumption and heat dissipation. The generic DVFS for devices, devfreq, may appear quite similar with /drivers/cpufreq. However, cpufreq does not allow to have multiple devices registered and is not suitable to have multiple heterogenous devices with different (but simple) governors. Normally, DVFS mechanism controls frequency based on the demand for the device, and then, chooses voltage based on the chosen frequency. devfreq also controls the frequency based on the governor's frequency recommendation and let OPP pick up the pair of frequency and voltage based on the recommended frequency. Then, the chosen OPP is passed to device driver's "target" callback. When PM QoS is going to be used with the devfreq device, the device driver should enable OPPs that are appropriate with the current PM QoS requests. In order to do so, the device driver may call opp_enable and opp_disable at the notifier callback of PM QoS so that PM QoS's update_target() call enables the appropriate OPPs. Note that at least one of OPPs should be enabled at any time; be careful when there is a transition. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mike Turquette <mturquette@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-01 22:19:15 +00:00
/* Caution: devfreq->lock must be locked before calling update_devfreq */
extern int update_devfreq(struct devfreq *devfreq);
PM / devfreq: Core updates to support devices which can idle Prepare devfreq core framework to support devices which can idle. When device idleness is detected perhaps through runtime-pm, need some mechanism to suspend devfreq load monitoring and resume back when device is online. Present code continues monitoring unless device is removed from devfreq core. This patch introduces following design changes, - use per device work instead of global work to monitor device load. This enables suspend/resume of device devfreq and reduces monitoring code complexity. - decouple delayed work based load monitoring logic from core by introducing helpers functions to be used by governors. This provides flexibility for governors either to use delayed work based monitoring functions or to implement their own mechanism. - devfreq core interacts with governors via events to perform specific actions. These events include start/stop devfreq. This sets ground for adding suspend/resume events. The devfreq apis are not modified and are kept intact. Signed-off-by: Rajagopal Venkat <rajagopal.venkat@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-25 23:50:09 +00:00
extern void devfreq_monitor_start(struct devfreq *devfreq);
extern void devfreq_monitor_stop(struct devfreq *devfreq);
extern void devfreq_monitor_suspend(struct devfreq *devfreq);
extern void devfreq_monitor_resume(struct devfreq *devfreq);
extern void devfreq_interval_update(struct devfreq *devfreq,
unsigned int *delay);
PM / devfreq: provide hooks for governors to be registered Add devfreq_add_governor and devfreq_remove_governor which can be invoked by governors to register with devfreq. This sets up the stage to dynamically switch governors and allow governors to be dynamically loaded as well. Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kevin Hilman <khilman@ti.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2012-10-29 20:01:43 +00:00
extern int devfreq_add_governor(struct devfreq_governor *governor);
extern int devfreq_remove_governor(struct devfreq_governor *governor);
PM: Introduce devfreq: generic DVFS framework with device-specific OPPs With OPPs, a device may have multiple operable frequency and voltage sets. However, there can be multiple possible operable sets and a system will need to choose one from them. In order to reduce the power consumption (by reducing frequency and voltage) without affecting the performance too much, a Dynamic Voltage and Frequency Scaling (DVFS) scheme may be used. This patch introduces the DVFS capability to non-CPU devices with OPPs. DVFS is a techique whereby the frequency and supplied voltage of a device is adjusted on-the-fly. DVFS usually sets the frequency as low as possible with given conditions (such as QoS assurance) and adjusts voltage according to the chosen frequency in order to reduce power consumption and heat dissipation. The generic DVFS for devices, devfreq, may appear quite similar with /drivers/cpufreq. However, cpufreq does not allow to have multiple devices registered and is not suitable to have multiple heterogenous devices with different (but simple) governors. Normally, DVFS mechanism controls frequency based on the demand for the device, and then, chooses voltage based on the chosen frequency. devfreq also controls the frequency based on the governor's frequency recommendation and let OPP pick up the pair of frequency and voltage based on the recommended frequency. Then, the chosen OPP is passed to device driver's "target" callback. When PM QoS is going to be used with the devfreq device, the device driver should enable OPPs that are appropriate with the current PM QoS requests. In order to do so, the device driver may call opp_enable and opp_disable at the notifier callback of PM QoS so that PM QoS's update_target() call enables the appropriate OPPs. Note that at least one of OPPs should be enabled at any time; be careful when there is a transition. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mike Turquette <mturquette@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-01 22:19:15 +00:00
#endif /* _GOVERNOR_H */