https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326411 | tilghman | 2011-07-05 17:08:29 -0500 (Tue, 05 Jul 2011) | 14 lines
Add the attribute "type" to each "<use>" for menuselect.
This matters only when autoconf fails to detect that weak linking is supported.
External optional dependencies will become optional in both cases, as they are
removed at compile time when not detected. However, runtime-optional modules
are made mandatory when weak linking is not found. This change affects only
the external optional dependencies; previously, they were incorrectly required
when weak linking support was not detected.
Patches:
20110702__issue18062__asterisk_trunk.diff.txt by tilghman (License #5003)
Tested by: iasgoscouk
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@326412 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324849 | rmudgett | 2011-06-24 15:46:01 -0500 (Fri, 24 Jun 2011) | 15 lines
Syntax errors in dialplan do not display the file name.
When issuing the CLI command "dialplan reload" syntax errors and warnings
are displayed on the console. The offending line number is displayed on
the console, but the file name is not displayed. Errors caught in
main/config.c do display the file name.
(closes issue ASTERISK-17985)
Reported by: ulogic
Patches:
pbx_config.patch uploaded by ulogic (License #5685) modified format
Tested by: rmudgett
JIRA SWP-3554
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@324850 f38db490-d61c-443f-a65b-d21fe96a405b
automatically stopped when applications are executed, so this shouldn't cause
any problems.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317806 f38db490-d61c-443f-a65b-d21fe96a405b
Make autoservice_start() and autoservice_stop() return nothing. Also check if
the autoservice flag is set before starting or stopping the autoservice and
stop and start the autoservice when returning control to and getting control
from the pbx engine.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317803 f38db490-d61c-443f-a65b-d21fe96a405b
This code will actually detect any dialplan jump from any application that
calls ast_explicit_goto(). This change is only being done in trunk as it may
change the way some dialplans execute.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317721 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r316265 | russell | 2011-05-03 14:55:49 -0500 (Tue, 03 May 2011) | 5 lines
Fix a bunch of compiler warnings generated by gcc 4.6.0.
Most of these are -Wunused-but-set-variable, but there were a few others
mixed in here, as well.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@316293 f38db490-d61c-443f-a65b-d21fe96a405b
If the user invokes 'dialplan add extension' into a non-existing context, the context will be created
and a message informing the user of the context being created will be issued in cli.
(closes issue #17431)
Reported by: leearcher
Patches:
context_auto_create.diff uploaded by kobaz (license 834)
Tested by: leearcher, kobaz, jrose
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@312678 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r310462 | tilghman | 2011-03-12 14:27:54 -0600 (Sat, 12 Mar 2011) | 45 lines
Merged revisions 310448 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r310448 | tilghman | 2011-03-12 14:24:54 -0600 (Sat, 12 Mar 2011) | 38 lines
Recorded merge of revisions 310435 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r310435 | tilghman | 2011-03-12 14:22:07 -0600 (Sat, 12 Mar 2011) | 31 lines
Add AELSub, which provides a stable entry point into AEL subroutines.
This commit needs some explanation, given that we're adding a new application
into an existing release branch. This is generally a violation of our release
policy, except in very limited circumstances, and I believe this is one of
those circumstances.
The problem that this solves is one of the sanity of using multiple dialplan
languages to define a dialplan. In the case of the reporter, he or she is
using AEL is define subroutines, while using Realtime extensions to invoke
those subroutines. While you can do this, it's based upon the reality of AEL
using actual dialplan extensions; however, there is no guarantee that the
details of _how_ AEL is compiled into extensions will remain stable. In fact,
at the time of this commit, it has already changed twice, once in a
fundamental way.
Now normally, a new application would only be added to trunk. However, this
application is explicitly to create a stable user-level API between versions,
and adding it to trunk only will not solve the user's problem of switching
between 1.6.2 and 1.8, nor will it help anybody switching from 1.8 to 1.10.
Therefore, it needs to go into existing release branches. For the sake of
consistency, and also because one of the changes was between 1.4 and 1.6.x,
I am also electing to commit this to 1.4.
(closes issue #18910)
Reported by: alexandrekeller
Patches:
20110304__issue18919__1.6.2.diff.txt uploaded by tilghman (license 14)
20110304__issue18919__1.4.diff.txt uploaded by tilghman (license 14)
Tested by: alexandrekeller
........
................
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@310500 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r309542 | mnicholson | 2011-03-04 13:00:33 -0600 (Fri, 04 Mar 2011) | 11 lines
Merged revisions 309541 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309541 | mnicholson | 2011-03-04 12:59:20 -0600 (Fri, 04 Mar 2011) | 4 lines
Check for errors from fseek() when loading config file, properly abort on errors from fread(), and supply a traceback for errors generated when loading the config file.
Also, prepend a newline to traceback output so that the main error message is on it's own line.
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@309543 f38db490-d61c-443f-a65b-d21fe96a405b
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@306010 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r300082 | lmadsen | 2011-01-03 07:14:25 -0600 (Mon, 03 Jan 2011) | 11 lines
Increase side of mapping response field.
I've increased the size of the response field in a DUNDi mapping because of
some documentation I'm writing. Previously it was set to AST_MAX_EXTENSION which
is only 80 characters, which is far too small when you're using some dialplan
functions to craft a response. The example I'm using is:
extensions =>
RegisteredDevices,0,SIP,dundi:very_awesome_password/${IF($[${DB_EXISTS(phones/${NUMBER}/device)}]?${DB(phones/${NUMBER}/device)}:None)},nopartial
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@300083 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r299449 | tilghman | 2010-12-22 14:05:02 -0600 (Wed, 22 Dec 2010) | 15 lines
Merged revisions 299448 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r299448 | tilghman | 2010-12-22 14:03:30 -0600 (Wed, 22 Dec 2010) | 8 lines
Resolve warnings by disambiguating the "s" extension as used by chan_dahdi from the "s" extension as used by the AEL macros.
(closes issue #18480)
Reported by: nivek
Patches:
20101215__issue18480__2.diff.txt uploaded by tilghman (license 14)
Tested by: nivek
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@299450 f38db490-d61c-443f-a65b-d21fe96a405b
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@299091 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r290255 | tilghman | 2010-10-04 18:23:11 -0500 (Mon, 04 Oct 2010) | 18 lines
Merged revisions 290254 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r290254 | tilghman | 2010-10-04 18:14:59 -0500 (Mon, 04 Oct 2010) | 11 lines
Change new pattern matcher to regard dashes the same as the old pattern matcher -- as visual candy to be ignored.
Also change the AEL parser to not generate dashes within extensions, as those
dashes would be ignored. Update the AEL tests to match this behavior.
(closes issue #17366)
Reported by: murf
Patches:
20100727__issue17366.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@290256 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r271399 | jpeeler | 2010-06-18 14:28:24 -0500 (Fri, 18 Jun 2010) | 11 lines
Fix crash when parsing some heavily nested statements in AEL on reload.
Due to the recursion used when compiling AEL in gen_prios, all the stack space
was being consumed when parsing some AEL that contained nesting 13 levels deep.
Changing a few large buffers to be heap allocated fixed the crash, although I
did not test how many more levels can now be safely used.
(closes issue #16053)
Reported by: diLLec
Tested by: jpeeler
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@271483 f38db490-d61c-443f-a65b-d21fe96a405b
Queries from the PBX core come in 3's. Caching avoids the additional
performance penalty from those two additional queries hitting the database.
(closes issue #16521)
Reported by: tilghman
Patches:
20091229__issue16521.diff.txt uploaded by tilghman (license 14)
Tested by: Hubguru, tilghman
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@266238 f38db490-d61c-443f-a65b-d21fe96a405b
This ensures cross-platform compatibility, even among Linux distributions,
which don't always put headers in the same place.
(closes issue #17391)
Reported by: loloski
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@265747 f38db490-d61c-443f-a65b-d21fe96a405b
This will save a considerable amount of CPU on the BSDs, including Mac OS X,
as it eliminates several places in the code that we previously used a busy
loop. Additionally, this adds a res_timing interface, using kqueue timers.
Review: https://reviewboard.asterisk.org/r/543/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@262852 f38db490-d61c-443f-a65b-d21fe96a405b
users expect them to work.
'core set debug' and 'core set verbose' can optionally change the
level for a specific filename; however, this is actually for a
specific source file name, not the module that source file is included
in. With examples like chan_sip, chan_iax2, chan_misdn and others
consisting of multiple source files, this will not lead to the
behavior that users expect. If they want to set the debug level for
chan_sip, they want it set for all of chan_sip, and not to have to
also set it for reqresp_parser and other files that comprise the
chan_sip module.
This patch changes this functionality to be module-name based instead
of file-name based.
To make this work, some Makefile modifications were required to ensure
that the AST_MODULE definition is present in each object file produced
for each module as well.
Review: https://reviewboard.asterisk.org/r/574/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@253917 f38db490-d61c-443f-a65b-d21fe96a405b
lmadsen