clean up a bunch more Zaptel-related references
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@130044 f38db490-d61c-443f-a65b-d21fe96a405b
This commit is contained in:
parent
835dc76c41
commit
73b88aaa71
18
CHANGES
18
CHANGES
|
@ -35,9 +35,9 @@ Dialplan Functions
|
|||
* CHANNEL() now has options for the maximum, minimum, and standard or normal
|
||||
deviation of jitter, rtt, and loss for a call using chan_sip.
|
||||
|
||||
Zaptel channel driver (chan_zap) Changes
|
||||
DAHDI channel driver (chan_dahdi) Changes
|
||||
----------------------------------------
|
||||
* Channels can now be configured using named sections in zapata.conf, just
|
||||
* Channels can now be configured using named sections in chan_dahdi.conf, just
|
||||
like other channel drivers, including the use of templates.
|
||||
* The default for pridialplan has changed from 'national' to 'unknown'.
|
||||
|
||||
|
@ -389,28 +389,28 @@ Agent channel changes
|
|||
default to their old hard-coded values ('#' and '*' respectively) so this should
|
||||
not break any existing agent installations.
|
||||
|
||||
Zaptel channel driver (chan_zap) Changes
|
||||
DAHDI channel driver (chan_dahdi) Changes
|
||||
----------------------------------------
|
||||
* SS7 support in chan_zap (via libss7 library)
|
||||
* SS7 support (via libss7 library)
|
||||
* In India, some carriers transmit CID via dtmf. Some code has been added
|
||||
that will handle some situations. The cidstart=polarity_IN choice has been added for
|
||||
those carriers that transmit CID via dtmf after a polarity change.
|
||||
* CID matching information is now shown when doing 'dialplan show'.
|
||||
* Added zap show version CLI command to chan_zap.
|
||||
* Added setvar support to zapata.conf channel entries.
|
||||
* Added dahdi show version CLI command.
|
||||
* Added setvar support to chan_dahdi.conf channel entries.
|
||||
* Added two new options: mwimonitor and mwimonitornotify. These options allow
|
||||
you to enable MWI monitoring on FXO lines. When the MWI state changes,
|
||||
the script specified in the mwimonitornotify option is executed. An internal
|
||||
event indicating the new state of the mailbox is also generated, so that
|
||||
the normal MWI facilities in Asterisk work as usual.
|
||||
* Added signalling type 'auto', which attempts to use the same signalling type
|
||||
for a channel as configured in Zaptel. This is primarily designed for analog
|
||||
for a channel as configured in DAHDI. This is primarily designed for analog
|
||||
ports, but will also work for digital ports that are configured for FXS or FXO
|
||||
signalling types. This mode is also the default now, so if your zapata.conf
|
||||
signalling types. This mode is also the default now, so if your chan_dahdi.conf
|
||||
does not specify signalling for a channel (which is unlikely as the sample
|
||||
configuration file has always recommended specifying it for every channel) then
|
||||
the 'auto' mode will be used for that channel if possible.
|
||||
* Added a 'zap set dnd' command to allow CLI control of the Do-Not-Disturb
|
||||
* Added a 'dahdi set dnd' command to allow CLI control of the Do-Not-Disturb
|
||||
state for a channel; also ensured that the DNDState Manager event is
|
||||
emitted no matter how the DND state is set or cleared.
|
||||
|
||||
|
|
|
@ -22,7 +22,7 @@
|
|||
|
||||
#include <stdio.h>
|
||||
#include <stdlib.h>
|
||||
#include <zaptel/tonezone.h>
|
||||
#include <dahdi/tonezone.h>
|
||||
#include <unistd.h>
|
||||
|
||||
#define PROGRAM "zones2indication"
|
||||
|
|
36
doc/ss7.txt
36
doc/ss7.txt
|
@ -18,24 +18,27 @@ done for ANSI switches.
|
|||
|
||||
To Use:
|
||||
=======
|
||||
In order to use libss7, you must get at least the following versions of Zaptel and Asterisk:
|
||||
Zaptel: 1.4.x
|
||||
In order to use libss7, you must get at least the following versions of DAHDI and Asterisk:
|
||||
DAHDI: 2.0.x
|
||||
libss7: trunk (currently, there *only* is a trunk release).
|
||||
Asterisk: trunk
|
||||
Asterisk: 1.6.x
|
||||
|
||||
You must then do a `make; make install` in each of the directories that you installed
|
||||
in the given order (Zaptel first, libss7 second, and Asterisk last).
|
||||
in the given order (DAHDI first, libss7 second, and Asterisk last).
|
||||
|
||||
NOTE: In order to check out the code, you must have the subversion client installed. This
|
||||
is how to check them out from the public subversion server.
|
||||
|
||||
These are the commands you would type to install them:
|
||||
|
||||
#jpeeler: REVISIT
|
||||
`svn co http://svn.digium.com/svn/zaptel/branches/1.4 zaptel-1.4`
|
||||
`cd zaptel-1.4`
|
||||
`svn co http://svn.digium.com/svn/dahdi/linux/trunk dahdi-trunk`
|
||||
`cd dahdi-trunk`
|
||||
`make; make install`
|
||||
|
||||
`svn co http://svn.digium.com/svn/dahdi/tools/trunk dahdi-tools`
|
||||
`cd dahdi-tools`
|
||||
`./configure; make; make install`
|
||||
|
||||
`svn co http://svn.digium.com/svn/libss7/trunk libss7-trunk`
|
||||
`cd libss7-trunk`
|
||||
`make; make install`
|
||||
|
@ -44,7 +47,7 @@ These are the commands you would type to install them:
|
|||
`cd asterisk-trunk`
|
||||
`./configure; make; make install;`
|
||||
|
||||
This should build Zaptel, libss7, and Asterisk with SS7 support.
|
||||
This should build DAHDI, libss7, and Asterisk with SS7 support.
|
||||
|
||||
In the past, there was a special asterisk-ss7 branch to use which contained the SS7 code.
|
||||
That code has been merged back into the trunk version of Asterisk, and the old asterisk-ss7
|
||||
|
@ -53,18 +56,17 @@ will not work against the current version of libss7, and you should switch to as
|
|||
instead.
|
||||
|
||||
CONFIGURATION:
|
||||
In zaptel.conf, your signalling channel(s) should be a "dchan" and your bearers should
|
||||
In /etc/dahdi/system.conf, your signalling channel(s) should be a "dchan" and your bearers should
|
||||
be set as "bchan".
|
||||
|
||||
In the asterisk-ss7 branch, there is a sample zapata.conf that is installed which
|
||||
contains sample configuration for setting up an E1 link.
|
||||
The sample chan_dahdi.conf contains sample configuration for setting up an E1 link.
|
||||
|
||||
In brief, here is a simple ss7 linkset setup:
|
||||
|
||||
signalling = ss7
|
||||
ss7type = itu ; or ansi if you are using an ANSI link
|
||||
|
||||
linkset = 1 ; Pick a number for your linkset identifier in zapata.conf
|
||||
linkset = 1 ; Pick a number for your linkset identifier in chan_dahdi.conf
|
||||
|
||||
pointcode = 28 ; The decimal form of your point code. If you are using an
|
||||
; ANSI linkset, you can use the xxx-xxx-xxx notation for
|
||||
|
@ -98,15 +100,15 @@ sigchan = 48 ; This would put two signalling channels in our linkset, one at
|
|||
; Zap/16 and one at Zap/48 which both would be used to send/receive
|
||||
; ISUP traffic.
|
||||
|
||||
; End of zapata.conf
|
||||
; End of chan_dahdi.conf
|
||||
|
||||
This is how a basic linkset is setup. For more detailed zapata.conf SS7 config information
|
||||
as well as other options available for that file, see the default zapata.conf that comes
|
||||
This is how a basic linkset is setup. For more detailed chan_dahdi.conf SS7 config information
|
||||
as well as other options available for that file, see the default chan_dahdi.conf that comes
|
||||
with the samples in asterisk. If you would like, you can do a `make samples` in your
|
||||
asterisk-trunk directory and it will install a sample zapata.conf for you that contains
|
||||
asterisk-trunk directory and it will install a sample chan_dahdi.conf for you that contains
|
||||
more information about SS7 setup.
|
||||
|
||||
For more information, please use the Asterisk-ss7 or Asterisk-dev mailing
|
||||
For more information, please use the asterisk-ss7 or asterisk-dev mailing
|
||||
lists (I monitor them regularly) or email me directly.
|
||||
|
||||
Matthew Fredrickson
|
||||
|
|
Reference in New Issue