|author||Andreas Eversberg <firstname.lastname@example.org>||2016-07-24 20:00:35 +0200|
|committer||Andreas Eversberg <email@example.com>||2016-07-31 14:48:56 +0200|
work on docs
Diffstat (limited to 'docs/a-netz.html')
1 files changed, 1 insertions, 1 deletions
diff --git a/docs/a-netz.html b/docs/a-netz.html
index cbef09a..6a961e8 100644
@@ -286,7 +286,7 @@ Instead of transmitting all 4 tones at once, they can be transmitted after each
Each tone is plays for a short time.
After the last tone has been played, base station starts again with the first tone.
My phone also responds to a call, even if the tones cycle rather than sent simultaneously.
-In this case the level of each tone is two times higher (+3 dB), but the peak level is two times lower (-3 dB) than the peak level of 4 simultaneous tones.
+In this case the deviation level of each tone is two times higher (+6 dB). (The level transmitted is two times lower (-6 dB) than the peak level of 4 simultaneous tones. This may help transmitters with deviation limiters to make the phone ring.)
Add command line option "-P 50" to send each tone for 50 milliseconds.
Try something between 20-100 milliseconds, if the phone still doesn't ring.
Be sure to check: Does your transmitter has enough frequency deviation (15 KHz is suggested)? Do you really send the correct number of your phone, check the frequencies of your phone and use "-D 0" option to see what 4 frequencies the base station actually transmits.