path: root/bsc/osmo-bsc.cfg
AgeCommit message (Collapse)AuthorFilesLines
2018-11-06BSC: remove explicit addressMax1-1/+0
The osmo-bsc.cfg should work on localhost. Having arbitrary IP address in it seems confusing and might lead to hard-to-debug errors. Change-Id: Ideb8a78348af435f9992c42bce0bb197d1e73e04
2018-09-27osmo-bsc.cfg: drop 'add' keyword from 'neighbor add'Neels Hofmeyr1-1/+1
Adjust for osmo-bsc change I143f21f6069d1a86096cc8240cf69eb7ea9c8ac8. Change-Id: I6a83a8d4ba61b87905c6fae457d4b4eb6078dce9
2018-09-26bsc: inter-BSC HO: add TC_ho_out_of_this_bsc, TC_ho_into_this_bscNeels Hofmeyr1-0/+2
Add f_gen_handover_req() like f_gen_ass_req(), to match AoIP or SCCPlite requirements. For incoming HO, MSC_ConnHdlr needs to know the SCCP addresses to expect the incoming SCCP Connection from MSC to BSC. Add 'handover' section to TestHdlrParams, and pass in the addresses from test_CT via that. In osmo-bsc.cfg, add a remote neighbor config, so that the VTY command 'handover any to arfcn 123 bsic any' can trigger an outgoing inter-BSC HO. Add various BSSMAP handover templates to BSSMAP_Templates.ttcn. Add RR Ho Command template to L3_Templates.ttcn. Move ts_BSSAP_Conn_Req() from msc/BSC_ConnectionHandler.ttcn to library/BSSMAP_Emulation.ttcn, so we can also model an SCCP Connection Request in BSC_Tests.ttcn (this time from MSC to BSC). Add the two new tests to bsc/expected-results.xml. Related: OS#2283 Change-Id: Id22852d4be7f127d827e7a8beeec55db27c07f03
2018-09-25ensure well-formed config filesHarald Welte1-37/+37
Change-Id: I09eedd3cda993b9fabfdcf7caf0b3a050eaad9b1
2018-06-03bsc: Enable LCLS in osmo-bsc.cfgHarald Welte1-0/+1
Change-Id: I39b0812423dd22f677334ad0ac406a23a1214fa9
2018-05-29sync local osmo-bsc.cfg with that used by jenkinsStefan Sperling1-5/+6
The osmo-bsc.cfg file in docker-playground/ttcn3-bsc-test contains codec, encryption, and ipaccess settings which were missing from the corresponding configuration file in this repository. This caused spurious test failures when running BSC_Tests outside of Jenkins. Change-Id: If392dcd42fb741c7ab8ae204bbefde89f05f0afe
2018-04-11bsc cfg: fix ARFCN-BSIC collisionsNeels Hofmeyr1-3/+3
All three BTS are configured for ARFCN 871 and BSIC 63, which causes trouble for handover tests. Set BSICs to 10, 11 and 12 (not 0,1,2 to mark the distinction from the cell_identity). It wasn't a problem so far since we cheated by passing the BTS target number from VTY. But as soon as we will start identifying handover target cells by ARFCN+BSIC exclusively, TC_ho_int would fall on its face without this patch. See also: docker-playground I29a117aa54aa06ca49646f25a08af8521832fd8d Change-Id: I2ea8889ea40953f5a23eab40db52585556a410bc
2018-03-27fix TCH/H for TC_chan_exhaustionPhilipp Maier1-3/+3
At the moment we use onle TCH/F and PDCH in our osmo-bsc config, but the tests TC_assignment_codec_amr_h and TC_assignment_codec_h requre a half rate channel in order to work. Configuring one TCH/F to TCH/H seems not to hurt any tests except TC_chan_exhaustion - also regard half rate channels in TC_chan_exhaustion - change included sample osmo-bsc.cfg Change-Id: Idd5a9602f1b49b5aa0fc510faa151fe16c0b404d Related: OS#3100
2018-03-21BSC_Tests: remove obsolete VTY configurationPhilipp Maier1-4/+0
The settings concerning the IPA ping are a leftover from the time where osmo-bsc used an IPA multiplex to support the the SCCP lite A interface dialect. Since the related code is now removed and osmo-bsc has been migrated to libosmo-sccp and real AoIP interface, the configuration is no longer needed. Change-Id: If67cdba2a043c5dbf23f998659c5000db924a7df
2018-02-16BSC: add codec-list to osmo-bsc.cfgPhilipp Maier1-0/+1
The provided osmo-bsc.cfg does not contain any codec list, this causes failure of the assignment related tests. - add missing codec list Change-Id: Id2509bcac4c54c910efd2db749eaa2085daa358d
2018-02-16BSC: remove obsolete loglevels from osmo-bsc.cfgPhilipp Maier1-15/+0
The provided osmo-bsc.cfg contains obsolete log levels. - Remove obsolete loglevels Change-Id: I00001c949b69ecaef8a8ed0163779a470378ab08
2018-01-09Fix BTS location area code assignment in test configuration.Stefan Sperling1-2/+2
The paging tests expect BTS 0 and 1 in LAC 1, and BTS 2 in LAC 2. BUt the osmo-bsc configuration file had BTS 1 in LAC 2, and BTS 2 in LAC 1. Change-Id: I1d6b02fe06116dee59977422bc93bcafcd3aba76
2017-12-18BSC_Tests: remove bogus line sfrom osmo-bsc.cfgHarald Welte1-5/+0
Those lines serve no purpose (and are being removed from osmo-bsc master) Change-Id: Icf037e8cd9a51e676eac472b29c0d616a5632c5d
2017-12-14BSC_Tests: Add TC_paging_counter to test paging related countersHarald Welte1-0/+1
Change-Id: I48057cb4eeb96637a663940cf4de4df1a9f2e85d
2017-12-13bsc: Run three virtual BTSs (2 in one lac, 1 in another)Harald Welte1-0/+180
This allows us to verify if the BSC pages *only* where it is supposed to page based on the cell identity list in the 08.08 PAGING. Change-Id: I53ffe44279a7b83e045b3fdb25da64529955d457
2017-12-11Add osmo-bsc.cfg and osmo-stp.cfg for this test caseHarald Welte1-0/+201