Small Osmocom Hardware projects
Go to file
Martin Schramm c55e611875 gtm900-bo: add JLCPCB engineering data
BOM, gerber+drill files, centroid data
2024-02-27 23:56:11 +01:00
amr-breakout amr-breakout: Fix silkscreen label of IN3 2023-08-21 21:35:36 +02:00
bgt-b210 Add component carrier module mechanics for Ettus USRP B2xx 2021-12-23 19:20:00 +01:00
bgt-bg7tbl-gpsdo add component carrier face plate designs for BG7TBL OCXO + GPSDO 2021-12-23 16:30:50 +01:00
bgt-bg7tbl-ocxo add component carrier face plate designs for BG7TBL OCXO + GPSDO 2021-12-23 16:30:50 +01:00
bgt-gs305e bgt-gs305e: Target 3000 design files created (manually) from DXF 2023-02-03 12:28:35 +01:00
bgt-keystone initial check-in of bgt-keystone project 2022-10-22 14:36:52 +02:00
bgt-pwr-dist bgt-pwr-dist: Increase restring on bottom side 2022-02-14 20:43:50 +01:00
bgt-rpi bgt-rpi4: Mounting a Raspberry Pi [4] in a 3U 19" component carrier 2021-12-12 20:58:07 +01:00
clock-converter clock-converter: add TFP 4 outline to frontpanel 2020-10-10 01:01:26 +02:00
clock-generator clock-generator: Add 'export' version of frontpanel (mirrored) 2020-10-14 15:34:17 +02:00
dus-lmt-breakout initial design for DUS LMT breakout board 2020-11-01 20:42:33 +01:00
e1-tap e1-tap: Add BOM attributes 2017-05-07 18:31:11 +02:00
eksos-fanmount Add eksos-fanmount.dxf 2023-08-27 15:09:01 +02:00
eksos-rj45-breakout eksos-rj45-breakout: Move OSHW logo to have no overlap 2023-10-19 10:52:39 +02:00
gtm900-breakout gtm900-bo: add JLCPCB engineering data 2024-02-27 23:56:11 +01:00
mpcie-breakout mpcie-breakout: Remove GND via underneath U.FL connectors 2020-09-10 22:50:23 +02:00
multivoltage-uart mvuart: align JP2 in 0.1' grid with JP3 (solves OSM#3037) 2018-08-23 20:41:26 +02:00
ncn8025-breakout add ncn8025-brekaout board 2021-07-05 21:52:15 +02:00
ngff-breakout ngff: update schematic pdf and placement pdf to hw version 3 2021-03-23 19:29:35 +01:00
ngff-cardem 3d printable case based on Ultimate Box Maker 2024-01-25 17:56:16 +01:00
ohm4-ocxo v3 final with gerber output 2019-06-22 11:59:27 +02:00
osmo-lea6t-gps update gerbers... 2019-06-22 11:52:46 +02:00
osmo-nvs-gps add gerber output of osm-nvs-gps v3 2019-06-22 11:55:44 +02:00
pico-pcm-cardem pico-pcm-cardem: add various bom annotations 2023-07-18 21:21:44 +02:00
plutosdr-revb-extclk plutosdr-revb-extclk: Fix capacitor footprints 2023-07-02 12:55:54 +02:00
rj45-jumper-box rj45_jumper_box: Add OSWH + sysmocom logo; final v2 as ordered 2023-01-20 16:38:05 +01:00
rs422-protector RS422-protector (to be used in OCTOI hub) 2022-08-22 20:38:22 +02:00
sc14dect-breakout sc14cvm-evb: Add attributes 2019-08-16 17:58:49 +02:00
sfp-breakout sfp-breakout: update Gerber names 2024-01-07 18:53:23 +01:00
siu-clock-breakout siu-clock-breakout: export PDF files 2020-10-17 19:08:52 +02:00
x21-jumper new X.21 "jumper box" design 2023-03-04 13:58:54 +01:00
xhfc-breakout xhfc-breaout: Conncet SPI_INV to GND 2022-06-04 09:12:28 +02:00
yang/doc Import presentation for the YANG project 2021-04-25 13:50:22 +02:00
.gitignore add .gitignore 2016-10-10 17:34:01 +02:00
README.md README.md: Add note about EKSOS breakout boards 2023-08-11 13:55:56 +02:00

README.md

osmo-small-hardware - Various small Osmocom Hardware Projects

This repository contains a number of OSHW (open source hardware) designs. They are part of the Osmocom Open Source Mobile Communications project.

Most of the designs are done in EAGLE CAD; the schematics and board design files as well as the BOM are contained in this repository.

GIT Repository

You can clone from the official osmo-small-hardware repository using

git clone https://gitea.osmocom.org/electronics/osmo-small-hardware

There is a web interface at https://gitea.osmocom.org/electronics/osmo-small-hardware

Contributing

Our coding standards are described at https://osmocom.org/projects/cellular-infrastructure/wiki/Coding_standards

We us a gerrit based patch submission/review process for managing contributions. Please see https://osmocom.org/projects/cellular-infrastructure/wiki/Gerrit for more details

clock-converter

The osmo-clock-conv is a small board for low-jitter conversion of a sine clock into a square clock, based around the LTC6957-4.

clock-generator

Osmocom Clock Generator board, using the Si5351C clock synthesizer to derive up to 8 different clocks from a single clock reference, such as a 10MHz GPS-DO or OCXO.

dus-lmt-breakout

This is a break-out board for the LMT port of Ericsson DUS-31/41 baseband units.

e1-tap

The Osmocom E1/T1 tap adapter allows you to tap into the communication of an E1/T1 line.

eksos-rj45-breakout

This contains a couple of break-out boards which can be used to break out the ISDN / PSTN ports of a Nokia EKSOS V5 access network.

gtm900-breakout

Break-out board for the GTM900B Calypso based GSM cellular modem.

mpcie-breakout

This is a small break-out board for miniPCIe (mPCIe) type cellular / WWAN modems.

multivoltage-uart

ngff-breakout

This is a small break-out board for M.2 (NGFF) type cellular / WWAN modems.

ohm4-ocxo

osmo-lea6t-gps

Small evaluation board for the u-blox LEA6-T timing GPS receiver.

osmo-nvs-gps

Small evaluation board for the NVS GPS receiver.

rj45-jumper-box

A jumper box for RJ45 cables. Useful for the many different RS232 console pin-outs on RJ45.

rj45-switch

sc14dect-breakout

Small evaluation board for the SC15 DECT module

sfp-breakout + sfp-experimenter

Boards for playing with SFP transceivers

siu-clock-breakout

A break-out board for the clock/sync port on the Ericsson SIU-02