summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorOliver Smith <osmith@sysmocom.de>2018-11-16 12:01:00 +0100
committerOliver Smith <osmith@sysmocom.de>2018-11-21 14:37:49 +0100
commit32bf80d3ff51feecb761a99a90692e590d78124c (patch)
treea67d592ed504c882bdf71c91f6fc856fab293c3f
parente7446e88104796a76bc74929b21e320ddb3d4a62 (diff)
remove OsmoMSC files (now avail in osmo-msc.git)osmith/move-manuals-to-project-repos
Files were added in osmo-msc.git Change-Id I2f9c27f81940b02414f0e618483bffade72e8cf7. The other project specific files will be moved in future commits. One commit per dir. Depends: osmo-msc.git Change-Id I2f9c27f81940b02414f0e618483bffade72e8cf7 Related: OS#3385 Change-Id: Ib234fe4f4ac36c27a4ad8a8d0050c1d6874232bc
-rw-r--r--Makefile.am1
-rw-r--r--OsmoMSC/chapters/control.adoc31
-rw-r--r--OsmoMSC/chapters/counters.adoc4
-rw-r--r--OsmoMSC/chapters/counters_generated.adoc40
-rw-r--r--OsmoMSC/chapters/net.adoc154
-rw-r--r--OsmoMSC/chapters/overview.adoc127
-rw-r--r--OsmoMSC/chapters/running.adoc148
-rw-r--r--OsmoMSC/images/sgs-imsi_attach_lu.msc15
-rw-r--r--OsmoMSC/images/sgs-mo_call_no_ps_ho.msc18
-rw-r--r--OsmoMSC/images/sgs-mo_sms_idle.msc21
-rw-r--r--OsmoMSC/images/sgs-mt_call_idle.msc17
-rw-r--r--OsmoMSC/images/sgs-mt_sms_idle.msc22
-rw-r--r--OsmoMSC/osmomsc-usermanual-docinfo.xml47
-rw-r--r--OsmoMSC/osmomsc-usermanual.adoc40
-rw-r--r--OsmoMSC/osmomsc-vty-reference.xml38
-rw-r--r--OsmoMSC/vty/msc_vty_additions.xml21
-rw-r--r--OsmoMSC/vty/msc_vty_reference.xml2686
-rw-r--r--configure.ac1
18 files changed, 0 insertions, 3431 deletions
diff --git a/Makefile.am b/Makefile.am
index dc8f1ca..952834a 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -13,7 +13,6 @@ SUBDIRS = tests \
OsmoHLR \
OsmoMGCP \
OsmoMGW \
- OsmoMSC \
OsmoNAT \
OsmoNITB \
OsmoPCU \
diff --git a/OsmoMSC/chapters/control.adoc b/OsmoMSC/chapters/control.adoc
deleted file mode 100644
index af03be7..0000000
--- a/OsmoMSC/chapters/control.adoc
+++ /dev/null
@@ -1,31 +0,0 @@
-[[control]]
-== Control interface
-
-The actual protocol is described in <<common-control-if>>, the variables common
-to all programs using it are described in <<ctrl_common_vars>>. This section
-describes the CTRL interface variables specific to OsmoMSC.
-
-.Variables available on OsmoMSC's Control interface
-[options="header",width="100%",cols="20%,5%,5%,50%,20%"]
-|===
-|Name|Access|Trap|Value|Comment
-|subscriber-list-active-v1|RO|No||Return list of active subscribers.
-|===
-
-=== subscriber-list-active-v1
-
-Return a list of subscribers that are successfully attached (including full
-successful authentication and ciphering if those are enabled).
-
-The reply comprises of one subscriber per line, of the format
-
-----
-<IMSI>,<MSISDN>\n[<IMSI>,<MSISDN>\n[...]]
-----
-
-For example:
-
-----
-901700000015252,22801
-901700000015253,22802
-----
diff --git a/OsmoMSC/chapters/counters.adoc b/OsmoMSC/chapters/counters.adoc
deleted file mode 100644
index 7fbb10c..0000000
--- a/OsmoMSC/chapters/counters.adoc
+++ /dev/null
@@ -1,4 +0,0 @@
-[[counters]]
-== Counters
-
-include::./counters_generated.adoc[]
diff --git a/OsmoMSC/chapters/counters_generated.adoc b/OsmoMSC/chapters/counters_generated.adoc
deleted file mode 100644
index afeb8ff..0000000
--- a/OsmoMSC/chapters/counters_generated.adoc
+++ /dev/null
@@ -1,40 +0,0 @@
-// autogenerated by show asciidoc counters
-These counters and their description based on OsmoMSC UNKNOWN (OsmoMSC).
-
-// generating tables for rate_ctr_group
-// rate_ctr_group table mobile switching center
-.msc - mobile switching center
-[options="header"]
-|===
-| Name | Reference | Description
-| loc_update_type:attach | <<msc_loc_update_type:attach>> | Received location update imsi attach requests.
-| loc_update_type:normal | <<msc_loc_update_type:normal>> | Received location update normal requests.
-| loc_update_type:periodic | <<msc_loc_update_type:periodic>> | Received location update periodic requests.
-| loc_update_type:detach | <<msc_loc_update_type:detach>> | Received location update detach indication.
-| loc_update_resp:failed | <<msc_loc_update_resp:failed>> | Rejected location updates.
-| loc_update_resp:completed | <<msc_loc_update_resp:completed>> | Successful location updates.
-| sms:submitted | <<msc_sms:submitted>> | Received a RPDU from a MS (MO).
-| sms:no_receiver | <<msc_sms:no_receiver>> | Counts SMS which couldn't routed because no receiver found.
-| sms:delivered | <<msc_sms:delivered>> | Global SMS Deliver attempts.
-| sms:rp_err_mem | <<msc_sms:rp_err_mem>> | CAUSE_MT_MEM_EXCEEDED errors of MS responses on a sms deliver attempt.
-| sms:rp_err_other | <<msc_sms:rp_err_other>> | Other error of MS responses on a sms delive attempt.
-| sms:deliver_unknown_error | <<msc_sms:deliver_unknown_error>> | Unknown error occured during sms delivery.
-| call:mo_setup | <<msc_call:mo_setup>> | Received setup requests from a MS to init a MO call.
-| call:mo_connect_ack | <<msc_call:mo_connect_ack>> | Received a connect ack from MS of a MO call. Call is now succesful connected up.
-| call:mt_setup | <<msc_call:mt_setup>> | Sent setup requests to the MS (MT).
-| call:mt_connect | <<msc_call:mt_connect>> | Sent a connect to the MS (MT).
-| call:active | <<msc_call:active>> | Count total amount of calls that ever reached active state.
-| call:complete | <<msc_call:complete>> | Count total amount of calls which got terminated by disconnect req or ind after reaching active state.
-| call:incomplete | <<msc_call:incomplete>> | Count total amount of call which got terminated by any other reason after reaching active state.
-|===
-// generating tables for osmo_stat_items
-// generating tables for osmo_counters
-// ungrouped osmo_counters
-.ungrouped osmo counters
-[options="header"]
-|===
-| Name | Reference | Description
-| msc.active_calls | <<ungroup_counter_msc.active_calls>> |
-|===
-
-
diff --git a/OsmoMSC/chapters/net.adoc b/OsmoMSC/chapters/net.adoc
deleted file mode 100644
index 06be4ba..0000000
--- a/OsmoMSC/chapters/net.adoc
+++ /dev/null
@@ -1,154 +0,0 @@
-[[net]]
-== Configuring the Core Network
-
-The core network parameters are configured by the config file (as in `osmo-msc
--c osmo-msc.cfg`). The config file is parsed by the VTY, which is also
-available via telnet in the running `osmo-msc` instance. Be aware that even
-though you may be able to change these parameters without restarting
-`osmo-msc`, some may not take immediate effect, and it is safest to use the
-config file to have these parameters set at startup time.
-
-The core network parameters are found in the `config` / `network`.
-
-A full reference to the available commands can be found in the _OsmoMSC VTY
-reference manual_ <<vty-ref-osmomsc>>. This section describes only the most
-commonly used settings.
-
-Here is an overview of the config items, described in more detail below:
-
-----
-network
- network country code 262
- mobile network code 89
- mm info 1
- short name OsmoMSC
- long name OsmoMSC
- authentication required
- encryption a5 3
-----
-
-[TIP]
-====
-Use the telnet VTY interface to query the current configuration of a running
-`osmo-msc` process:
-
-----
-$ telnet localhost 4254
-OsmoMSC> enable
-OsmoMSC# show running-config
-----
-
-Some parameters may be changed without restarting `osmo-msc`. To reach the
-`network` node, enter:
-
-----
-OsmoMSC> enable
-OsmoMSC# configure terminal
-OsmoMSC(config)# network
-OsmoMSC(config-net)# short name Example-Name
-OsmoMSC(config-net)# exit
-OsmoMSC(config)#
-----
-
-The telnet VTY features tab-completion as well as context sensitive help shown
-when entering a `?` question mark.
-
-You can always use the `list` VTY command or enter `?` on the blank prompt to
-get a list of all possible commands at the current node.
-====
-
-
-=== MCC/MNC
-
-The key identities of every GSM PLMN is the Mobile Country Code and the Mobile
-Network Code. They are identical over the entire network. In most cases, the
-MCC/MNC will be allocated to the operator by the respective local regulatory
-authority. For example, to set the MCC/MNC of 262-89, have this in your
-osmo-msc.cfg:
-
-----
-network
- network country code 262
- mobile network code 89
-----
-
-
-=== Configuring MM INFO
-
-The _MM INFO_ procedure can be used after a successful _LOCATION UPDATE_ in
-order to transmit the human-readable network name as well as local time zone
-information to the MS. By default, _MM INFO_ is not active, i.e. `0`. Set to `1`
-to activate this feature:
-
-----
-network
- mm info 1
- short name OsmoMSC
- long name OsmoMSC
-----
-
-[NOTE]
-====
-Not all phones support the MM INFO procedure. If a phone is not
-factory-programmed to contain the name for your MCC/MNC, it will likely only
-provide a numeric display of the network name, such as _262-89_, or show the
-country code transformed into a letter, such as _D 89_.
-====
-
-The time information transmitted is determined by the local system time of the
-operating system on which OsmoMSC is running.
-
-
-=== Authentication
-
-Authorized subscribers must be entered in the HLR database, see the _OsmoHLR
-reference manual_ <<userman-osmohlr>>. If authentication tokens (such as KI for
-2G, or K and OP/OPC for UMTS) are present in the HLR, OsmoMSC will only attach
-a subscriber after successful authentication.
-
-If no authentication keys are present in the HLR for a given subscriber,
-OsmoMSC will attach the subscriber _without_ authentication. You can reject
-subscribers that lack authentication info in the HLR with this setting:
-
-----
-network
- authentication required
-----
-
-=== Ciphering
-
-To enable ciphering on the radio link, authentication must take place first:
-the Kc resulting from authentication is the key used for ciphering. Hence, all
-subscribers must have authentication tokens available in the HLR for ciphering.
-
-The MS, BTS and MSC must agree on a ciphering algorithm to use.
-
-- The MS sends its supported ciphering algorithms via Classmark IEs during
- Location Updating.
-- Typically the BSC needs to know which A5 ciphers are supported by connected
- BTSes.
-- Finally, OsmoMSC may impose that specific A5 ciphers shall not be considered.
-
-It is the responsibility of the BSC to then pick an A5 cipher that satisfies
-all requirements.
-
-- In OsmoMSC, A5/0 means that ciphering is turned off.
-+
-----
-network
- encryption a5 0
-----
-
-- A5/1 and A5/3 are currently supported by Osmocom.
-+
-----
-network
- encryption a5 3
-----
-
-- Never use A5/2: it is an "export grade cipher" and has been deprecated for
- its low ciphering strength.
-
-NOTE: At the time of writing, OsmoMSC supports setting only a single A5 cipher,
-while it should be able to allow a set of ciphers. This is subject to ongoing
-development.
diff --git a/OsmoMSC/chapters/overview.adoc b/OsmoMSC/chapters/overview.adoc
deleted file mode 100644
index 0bb47d7..0000000
--- a/OsmoMSC/chapters/overview.adoc
+++ /dev/null
@@ -1,127 +0,0 @@
-[[overview]]
-== Overview
-
-This manual should help you getting started with OsmoMSC. It will cover
-aspects of configuring and running the OsmoMSC.
-
-[[intro_overview]]
-=== About OsmoMSC
-
-OsmoMSC is the Osmocom implementation of a Mobile Switching Center (MSC) for 2G
-and 3G GSM and UMTS mobile networks. Its interfaces are:
-
-- GSUP towards OsmoHLR (or a MAP proxy);
-- A over IP towards a BSC (e.g. OsmoBSC);
-- IuCS towards an RNC or HNB-GW (e.g. OsmoHNBGW) for 3G voice;
-- MNCC (Mobile Network Call Control derived from GSM TS 04.07);
-- SMPP 3.4 (Short Message Peer-to-Peer);
-- The Osmocom typical telnet VTY and CTRL interfaces.
-
-OsmoMSC originated from the OpenBSC project, which started as a minimalistic
-all-in-one implementation of the GSM Network. In 2017, OpenBSC had reached
-maturity and diversity (including M3UA SIGTRAN and 3G support in the form of
-IuCS and IuPS interfaces) that naturally lead to a separation of the all-in-one
-approach to fully independent separate programs as in typical GSM networks.
-Before it was split off, OsmoMSC originated from libmsc of the old openbsc.git.
-Since a true _A_ interface and IuCS for 3G support is available, OsmoMSC
-exists only as a separate standalone entity.
-
-Key differences of the new OsmoMSC compared to the old OsmoNITB are:
-
-- The complete VLR implementation that communicates with the separate HLR
- (OsmoHLR) for subscriber management. In contrast to the OsmoNITB, HLR queries
- are fully asynchronous, and the separate HLR allows using centralized
- subscriber management for both circuit-switched and packet-switched domains
- (i.e. one OsmoHLR for both OsmoMSC and OsmoSGSN).
-
-- VLR and HLR brought full UMTS AKA (Authentication and Key Agreement) support,
- i.e. Milenage authentication in both the full 3G variant as well as the
- backwards compatible 2G variant.
-
-- Addition of a true _A_ interface for 2G voice services. Previously, OsmoBSC
- had an SCCPlite based _A_ interface towards 3rd party MSC implementations.
- OsmoMSC features a true SCCP/M3UA _A_ interface, which allows running OsmoBSC
- against this Osmocom based MSC implementation. The new SCCP/M3UA SIGTRAN for
- the _A_ interface is implemented in libosmo-sccp, which is used by OsmoMSC
- and OsmoBSC (and others), to establish a link via an STP (e.g. OsmoSTP).
-
-- Addition of an _IuCS_ interface to allow operating 3G voice services, also
- via SCCP/M3UA SIGTRAN, for example connecting via OsmoHNBGW to a 3G small
- cell device.
-
-Find the OsmoMSC issue tracker and wiki online at
-
-- https://osmocom.org/projects/osmomsc
-- https://osmocom.org/projects/osmomsc/wiki
-
-
-[[fig-gsm]]
-.Typical GSM network architecture used with OsmoMSC
-[graphviz]
-----
-digraph G {
- rankdir=LR;
- MS0 [label="MS"]
- MS1 [label="MS"]
- MS2 [label="MS"]
- MS3 [label="MS"]
- UE0 [label="UE"]
- UE1 [label="UE"]
- BTS0 [label="BTS"]
- BTS1 [label="BTS"]
- STP [label="STP\n(SCCP routing)"]
- HLR [label="HLR+AUC+EIR"]
- HNB [label="RNC or hNodeB"]
- MGW
- MS0->BTS0 [label="Um"]
- MS1->BTS0 [label="Um"]
- MS2->BTS1 [label="Um"]
- MS3->BTS1 [label="Um"]
- UE0->HNB
- UE1->HNB
- BTS0->BSC [label="Abis"]
- BTS1->BSC [label="Abis"]
- BSC->STP [label="A/SCCP/M3UA"]
- STP->MSC [label="A/SCCP/M3UA"]
- STP->MSC [label="IuCS/SCCP/M3UA"]
- VLR->HLR [label="GSUP"]
- HNB->HNBGW [label="Iuh"]
- HNBGW->STP [label="IuCS/SCCP/M3UA"]
- MSC->MGW [label="MGCP"]
- BTS0->MGW [label="RTP"]
- BTS1->MGW [label="RTP"]
- subgraph cluster_msc {
- label = "OsmoMSC";
- MSC->SMSC;
- MSC->VLR
- }
-}
-----
-
-
-=== Software Components
-
-This is a brief description of OsmoMSC's internal software components.
-
-==== SMSC
-
-A minimal store-and-forward server for SMS, supporting both MO and MT
-SMS service, as well as multi-part messages.
-
-The built-in SMSC also supports an external SMSC interface. For more
-information, see <<smpp>>.
-
-==== MSC
-
-The MSC component implements the mobility management (MM) functions of the TS
-04.08 and delegates to SMSC for SMS message handling and the VLR for subscriber
-management.
-
-Furthermore, it can handle TS 04.08 Call Control (CC), either by use of
-an internal MNCC handler, or by use of an external MNCC agent. For more
-information see <<mncc>>.
-
-==== VLR
-
-A fully featured Visitor Location Register handles the subscriber management
-and authentication, and interfaces via GSUP to the external HLR.
diff --git a/OsmoMSC/chapters/running.adoc b/OsmoMSC/chapters/running.adoc
deleted file mode 100644
index cb68157..0000000
--- a/OsmoMSC/chapters/running.adoc
+++ /dev/null
@@ -1,148 +0,0 @@
-== Running OsmoMSC
-
-The OsmoMSC executable (`osmo-msc`) offers the following command-line
-arguments:
-
-=== SYNOPSIS
-
-*osmo-msc* [-h|-V] [-d 'DBGMASK'] [-D] [-c 'CONFIGFILE'] [-s] [-T] [-e 'LOGLEVEL'] [-l 'DATABASE'] [-M 'SOCKETPATH'] [-C]
-
-=== OPTIONS
-
-*-h, --help*::
- Print a short help message about the supported options
-*-V, --version*::
- Print the compile-time version number of the OsmoBTS program
-*-d, --debug 'DBGMASK','DBGLEVELS'*::
- Set the log subsystems and levels for logging to stderr. This
- has mostly been superseded by VTY-based logging configuration,
- see <<logging>> for further information.
-*-D, --daemonize*::
- Fork the process as a daemon into background.
-*-c, --config-file 'CONFIGFILE'*::
- Specify the file and path name of the configuration file to be
- used. If none is specified, use `osmo-msc.cfg` in the current
- working directory.
-*-s, --disable-color*::
- Disable colors for logging to stderr. This has mostly been
- deprecated by VTY based logging configuration, see <<logging>>
- for more information.
-*-T, --timestamp*::
- Enable time-stamping of log messages to stderr. This has mostly
- been deprecated by VTY based logging configuration, see
- <<logging>> for more information.
-*-e, --log-level 'LOGLEVEL'*::
- Set the global log level for logging to stderr. This has mostly
- been deprecated by VTY based logging configuration, see
- <<logging>> for more information.
-*-l, --database 'DATABASE'*::
- Specify the file name of the SQLite3 database to use as SMS storage
-*-M, --mncc-sock-path*::
- Enable the MNCC socket for an external MNCC handler. See
- <<mncc>> for further information.
-*-m, --mncc-sock*::
- Same as option -M (deprecated).
-*-C, --no-dbcounter*::
- Disable the regular periodic synchronization of statistics
- counters to the database.
-
-
-=== Multiple instances
-
-Running multiple instances of `osmo-msc` on the same computer is possible if all
-interfaces (VTY, CTRL) are separated using the appropriate configuration
-options. The IP based interfaces are binding to local host by default. In order
-to separate the processes, the user has to bind those services to specific but
-different IP addresses and/or ports.
-
-The VTY and the Control interface can be bound to IP addresses from the loopback
-address range, for example:
-
-----
-line vty
- bind 127.0.0.2
-ctrl
- bind 127.0.0.2
-----
-
-If external SMPP is enabled, you may bind it to a different interface using:
-
-----
-smpp
- local-tcp-ip 10.23.42.1 2775
-----
-
-More on SMPP configuration in <<smpp-config-global>>.
-
-The external MNCC handler is configured by the `--mncc-sock` commandline
-argument. Choose a different such socket path for each OsmoMSC instance running
-on the same file system. See more in <<mncc-external>>.
-
-For the following links, OsmoMSC acts as a client and does not listen/bind to a
-specific interface, and will hence not encounter conflicts for multiple instances
-running on the same interface:
-
-- The SCCP/M3UA links are established by OsmoMSC contacting an STP.
-- The GSUP link is established by OsmoMSC contacting an HLR.
-
-
-=== Configure primary links
-
-==== Configure SCCP/M3UA to accept _A_ and _IuCS_ links
-
-OsmoMSC will contact an STP instance to establish an SCCP/M3UA link. BSC and
-HNBGW will then reach the MSC via this link. By default, an STP instance is
-assumed to listen on the default M3UA port (2905) on the local host.
-
-Establishing an SCCP/M3UA link towards an STP instance not on the local host
-can be configured as follows:
-
-----
-cs7 instance 0
- asp my-OsmoMSC 2905 0 m3ua
- ! IP address of the remote STP:
- remote-ip 10.23.24.1
-----
-
-Note that _A_ and _IuCS_ may use different SCCP instances, if so desired:
-
-----
-cs7 instance 0
- asp my-OsmoMSC-A 2905 0 m3ua
- remote-ip 10.23.42.1
-cs7 instance 1
- asp my-OsmoMSC-Iu 2905 0 m3ua
- remote-ip 10.23.42.2
-msc
- cs7-instance-a 0
- cs7-instance-iu 1
-----
-
-A full configuration needs an `asp` on an `as` -- an Application Server Process
-running on an Application Server -- as well as a local point code and routing
-configuration. The SCCP VTY automatically creates those parts that are missing,
-by assuming sane defaults. A complete configuration would look like this:
-
-----
-cs7 instance 0
- point-code 0.23.1
- asp my-OsmoMSC-A-Iu 2905 0 m3ua
- remote-ip 127.0.0.1
- as my-as-for-OsmoMSC-A-Iu m3ua
- asp my-OsmoMSC-A-Iu
- routing-key 0 0.23.1
-----
-
-==== Configure GSUP to reach the HLR
-
-OsmoMSC will assume a GSUP server (OsmoHLR) to run on the local host and the
-default GSUP port (4222). Contacting an HLR at a different IP address can be
-configured as follows:
-
-----
-hlr
- ! IP address of the remote HLR:
- remote-ip 10.23.42.1
- ! default port is 4222, optionally configurable by:
- remote-port 1234
-----
diff --git a/OsmoMSC/images/sgs-imsi_attach_lu.msc b/OsmoMSC/images/sgs-imsi_attach_lu.msc
deleted file mode 100644
index e62c2b8..0000000
--- a/OsmoMSC/images/sgs-imsi_attach_lu.msc
+++ /dev/null
@@ -1,15 +0,0 @@
-msc {
- UE, MME, VLR [label="MSC/VLR"], HSS [label="HSS/HLR"];
-
- UE => MME [label="Attach Request"];
- UE box HSS [label="Steps 3..16 of LTE Attach procedure TS 23.401"];
- MME box MME [label="Derive VLR Number"];
- MME => VLR [label="LU Request"];
- VLR box VLR [label="Create SGs Association"];
- VLR box HSS [label="MAP/GSUP UL / ISD"];
- MME <= VLR [label="LU Accept"];
- UE box HSS [label="Steps 17..16 of LTE Attach procedure TS 23.401"];
- |||;
- ...;
- MME <= VLR [label="Paging Request"];
-}
diff --git a/OsmoMSC/images/sgs-mo_call_no_ps_ho.msc b/OsmoMSC/images/sgs-mo_call_no_ps_ho.msc
deleted file mode 100644
index f886c89..0000000
--- a/OsmoMSC/images/sgs-mo_call_no_ps_ho.msc
+++ /dev/null
@@ -1,18 +0,0 @@
-msc {
- hscale=2;
- UE, ENB [label="eNodeB"], BSS, MME, VLR [label="MSC/VLR"], HSS [label="HSS/HLR"];
-
- UE => MME [label="NAS Extended Service Request"];
- ENB <= MME [label="S1-AP UE Context Mod Req with CSFB"];
- ENB => MME [label="S1-AP UE Context Mod Resp"];
- UE <= ENB [label="NACC (Network Assisted Cell Change)"];
- ENB => MME [label="S1-AP S1 UE Context Release Req"];
- UE box MME [label="S1 UE Context Release"];
-
- UE box HSS [label="UE changes RAT then LA and/or RA update"];
- UE <=> HSS [label="PS Suspend (TS 23.060)"];
-
- UE => BSS [label="CM SERV REQ"];
- BSS => VLR [label="COMPL L3 (CM SERV REQ)"];
- UE <=> VLR [label="Normal 2G Voice Call"];
-}
diff --git a/OsmoMSC/images/sgs-mo_sms_idle.msc b/OsmoMSC/images/sgs-mo_sms_idle.msc
deleted file mode 100644
index 5acc0e8..0000000
--- a/OsmoMSC/images/sgs-mo_sms_idle.msc
+++ /dev/null
@@ -1,21 +0,0 @@
-msc {
- hscale=2;
- UE, MME, VLR [label="MSC/VLR"], HSS [label="HSS/HLR"], SMSC;
-
- UE box HSS [label="EPS/IMSI attach procedure"];
- ...;
- UE box MME [label="UE triggered Service Request"];
- UE => MME [label="UL NAS Transport"];
- MME => VLR [label="SGsAP UPLINK UNITDATA\n(CP-DATA/RP-DATA/TPDU)"];
- VLR => SMSC [label="MAP/GSUP Forward SM"];
- MME <= VLR [label="SGsAP DOWNLINK UNITDATA"];
- UE <= MME [label="DL NAS Transport"];
- ...;
-
- VLR <= SMSC [label="Delivery Report"];
- MME <= VLR [label="SGsAP DOWNLINK UNITDATA"];
- UE <= MME [label="DL NAS Transport"];
- UE => MME [label="UL NAS Transport"];
- MME => VLR [label="SGsAP UPLINK UNITDATA"];
- MME <= VLR [label="SGsAP RELEASE REQ"];
-}
diff --git a/OsmoMSC/images/sgs-mt_call_idle.msc b/OsmoMSC/images/sgs-mt_call_idle.msc
deleted file mode 100644
index b3cff3c..0000000
--- a/OsmoMSC/images/sgs-mt_call_idle.msc
+++ /dev/null
@@ -1,17 +0,0 @@
-msc {
- hscale=2;
- UE, ENB [label="eNodeB"], BSS, MME, VLR [label="MSC/VLR"], PSTN;
-
- VLR <= PSTN [label="ISUP IAM or SIP INVITE"];
- MME <= VLR [label="SGsAP PAGING REQUEST"];
- ENB <= MME [label="Paging"];
- UE <= MME [label="Paging"];
-
- UE => MME [label="Extended Service Req"];
- MME => VLR [label="SGsAP SERVICE REQUEST"];
- ENB <= MME [label="Initial UE Ctx Setup"];
-
- UE => BSS [label="Paging Response"];
- BSS => VLR [label="COMPL L3 (PAGING RESP)"];
- UE <=> VLR [label="Normal 2G Voice Call"];
-}
diff --git a/OsmoMSC/images/sgs-mt_sms_idle.msc b/OsmoMSC/images/sgs-mt_sms_idle.msc
deleted file mode 100644
index 7b453e0..0000000
--- a/OsmoMSC/images/sgs-mt_sms_idle.msc
+++ /dev/null
@@ -1,22 +0,0 @@
-msc {
- hscale=2;
- UE, MME, VLR [label="MSC/VLR"], HSS [label="HSS/HLR"], SMSC;
-
- UE box HSS [label="EPS/IMSI attach procedure"];
- ...;
-
- VLR <= SMSC [label="MAP/GSUP ForwardSM"];
- MME <= VLR [label="SGsAP PAGING"];
- UE <= MME [label="Paging"];
- UE box MME [label="Service Request"];
- MME => VLR [label="SGsAP SERVICE REQ"];
- MME <= VLR [label="SGsAP DL UNITDATA\n(CP-DATA/RP-DATA/TPDU)"];
- UE <= MME [label="DL NAS Transport"];
- UE => MME [label="UL NAS Transport"];
- MME => VLR [label="SGsAP UL UNITDATA"];
- ...;
- UE => MME [label="UL NAS Transport"];
- MME => VLR [label="SGsAP UL UNITDATA"];
- VLR => SMSC [label="Delivery report"];
- MME <= VLR [label="SGsAP RELEASE REQ"];
-}
diff --git a/OsmoMSC/osmomsc-usermanual-docinfo.xml b/OsmoMSC/osmomsc-usermanual-docinfo.xml
deleted file mode 100644
index d99bba7..0000000
--- a/OsmoMSC/osmomsc-usermanual-docinfo.xml
+++ /dev/null
@@ -1,47 +0,0 @@
-<revhistory>
- <revision>
- <revnumber>1</revnumber>
- <date>September 18th, 2017</date>
- <authorinitials>NH</authorinitials>
- <revremark>
- Initial version; based on OsmoNITB manual version 2.
- </revremark>
- </revision>
-</revhistory>
-
-<authorgroup>
- <author>
- <firstname>Neels</firstname>
- <surname>Hofmeyr</surname>
- <email>nhofmeyr@sysmocom.de</email>
- <authorinitials>NH</authorinitials>
- <affiliation>
- <shortaffil>sysmocom</shortaffil>
- <orgname>sysmocom - s.f.m.c. GmbH</orgname>
- <jobtitle>Senior Developer</jobtitle>
- </affiliation>
- </author>
-</authorgroup>
-
-<copyright>
- <year>2017</year>
- <holder>sysmocom - s.f.m.c. GmbH</holder>
-</copyright>
-
-<legalnotice>
- <para>
- Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.3 or any later version published by the Free Software
- Foundation; with the Invariant Sections being just 'Foreword',
- 'Acknowledgements' and 'Preface', with no Front-Cover Texts,
- and no Back-Cover Texts. A copy of the license is included in
- the section entitled "GNU Free Documentation License".
- </para>
- <para>
- The Asciidoc source code of this manual can be found at
- <ulink url="http://git.osmocom.org/osmo-gsm-manuals/">
- http://git.osmocom.org/osmo-gsm-manuals/
- </ulink>
- </para>
-</legalnotice>
diff --git a/OsmoMSC/osmomsc-usermanual.adoc b/OsmoMSC/osmomsc-usermanual.adoc
deleted file mode 100644
index 4fd0cc7..0000000
--- a/OsmoMSC/osmomsc-usermanual.adoc
+++ /dev/null
@@ -1,40 +0,0 @@
-:gfdl-enabled:
-:program-name: OsmoMSC
-
-OsmoMSC User Manual
-====================
-Neels Hofmeyr <nhofmeyr@sysmocom.de>
-
-
-include::./common/chapters/preface.adoc[]
-
-include::{srcdir}/chapters/overview.adoc[]
-
-include::{srcdir}/chapters/running.adoc[]
-
-include::{srcdir}/chapters/control.adoc[]
-
-include::{srcdir}/chapters/counters.adoc[]
-
-include::./common/chapters/vty.adoc[]
-
-include::./common/chapters/logging.adoc[]
-
-include::{srcdir}/chapters/net.adoc[]
-
-include::./common/chapters/smpp.adoc[]
-
-include::./common/chapters/mncc.adoc[]
-
-include::./common/chapters/control_if.adoc[]
-
-include::./common/chapters/gsup.adoc[]
-
-include::./common/chapters/port_numbers.adoc[]
-
-include::./common/chapters/bibliography.adoc[]
-
-include::./common/chapters/glossary.adoc[]
-
-include::./common/chapters/gfdl.adoc[]
-
diff --git a/OsmoMSC/osmomsc-vty-reference.xml b/OsmoMSC/osmomsc-vty-reference.xml
deleted file mode 100644
index 132f200..0000000
--- a/OsmoMSC/osmomsc-vty-reference.xml
+++ /dev/null
@@ -1,38 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- ex:ts=2:sw=42sts=2:et
- -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
--->
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN"
-"http://docbook.org/xml/5.0/dtd/docbook.dtd" [
-<!ENTITY chapter-vty SYSTEM "./common/chapters/vty.xml" >
-<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" >
-]>
-
-<book>
- <info>
- <revhistory>
- <revision>
- <revnumber>v1</revnumber>
- <date>18th September 2017</date>
- <authorinitials>nh</authorinitials>
- <revremark>Initial</revremark>
- </revision>
- </revhistory>
-
- <title>OsmoMSC VTY Reference</title>
-
- <copyright>
- <year>2017</year>
- </copyright>
-
- <legalnotice>
- <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved.
- </para>
- </legalnotice>
- </info>
-
- <!-- Main chapters-->
- &chapter-vty;
-</book>
-
diff --git a/OsmoMSC/vty/msc_vty_additions.xml b/OsmoMSC/vty/msc_vty_additions.xml
deleted file mode 100644
index adc0f7e..0000000
--- a/OsmoMSC/vty/msc_vty_additions.xml
+++ /dev/null
@@ -1,21 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
- <node id='config-mncc-int'>
- <name>MNCC Internal Configuration</name>
- <description>This node allows to configure the default codecs for
- the internal call control handling.</description>
- </node>
- <node id='config-smpp'>
- <name>SMPP Configuration</name>
- <description>This node allows to configure the SMPP interface
- for interfacing with external SMS applications. This section
- contains generic/common SMPP related configuration, and no
- per-ESME specific parameters.</description>
- </node>
- <node id='config-smpp-esme'>
- <name>ESME Configuration</name>
- <description>This node allows to configure one particular SMPP
- ESME, which is an External SMS Entity such as a SMS based
- application server. You can define any number of ESME within
- the SMPP node of the OsmoNITB VTY.</description>
- </node>
-</vtydoc>
diff --git a/OsmoMSC/vty/msc_vty_reference.xml b/OsmoMSC/vty/msc_vty_reference.xml
deleted file mode 100644
index bb7e958..0000000
--- a/OsmoMSC/vty/msc_vty_reference.xml
+++ /dev/null
@@ -1,2686 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
- <node id='_common_cmds_'>
- <name>Common Commands</name>
- <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
- <command id='help'>
- <params>
- <param name='help' doc='Description of the interactive help system' />
- </params>
- </command>
- <command id='list'>
- <params>
- <param name='list' doc='Print command list' />
- </params>
- </command>
- <command id='write terminal'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='terminal' doc='Write to terminal' />
- </params>
- </command>
- <command id='write file'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='file' doc='Write to configuration file' />
- </params>
- </command>
- <command id='write memory'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='memory' doc='Write configuration to the file (same as write file)' />
- </params>
- </command>
- <command id='write'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- </params>
- </command>
- <command id='show running-config'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='running-config' doc='running configuration' />
- </params>
- </command>
- <command id='exit'>
- <params>
- <param name='exit' doc='Exit current mode and down to previous mode' />
- </params>
- </command>
- <command id='end'>
- <params>
- <param name='end' doc='End current mode and change to enable mode.' />
- </params>
- </command>
- </node>
- <node id='view'>
- <name>view</name>
- <command id='show version'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='version' doc='Displays program version' />
- </params>
- </command>
- <command id='show online-help'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='online-help' doc='Online help' />
- </params>
- </command>
- <command id='enable'>
- <params>
- <param name='enable' doc='Turn on privileged mode command' />
- </params>
- </command>
- <command id='terminal length &lt;0-512&gt;'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='length' doc='Set number of lines on a screen' />
- <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
- </params>
- </command>
- <command id='terminal no length'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='length' doc='Set number of lines on a screen' />
- </params>
- </command>
- <command id='who'>
- <params>
- <param name='who' doc='Display who is on vty' />
- </params>
- </command>
- <command id='show history'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='history' doc='Display the session command history' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; users'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='users' doc='User Table' />
- </params>
- </command>
- <command id='show cs7 (sua|m3ua|ipa) [&lt;0-65534&gt;]'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='sua' doc='SCCP User Adaptation' />
- <param name='m3ua' doc='MTP3 User Adaptation' />
- <param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
- <param name='[&lt;0-65534&gt;]' doc='Port Number' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; asp'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='asp' doc='Application Server Process (ASP)' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; as (active|all|m3ua|sua)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='as' doc='Application Server (AS)' />
- <param name='active' doc='Display all active ASs' />
- <param name='all' doc='Display all ASs (default)' />
- <param name='m3ua' doc='Display all m3ua ASs' />
- <param name='sua' doc='Display all SUA ASs' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; sccp addressbook'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='sccp' doc='Signalling Connection Control Part' />
- <param name='addressbook' doc='List all SCCP addressbook entries' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; sccp users'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='sccp' doc='Signalling Connection Control Part' />
- <param name='users' doc='Show List of SCCP Users registered' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; sccp ssn &lt;0-65535&gt;'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='sccp' doc='Signalling Connection Control Part' />
- <param name='ssn' doc='Find an SCCP User registered for the given SSN' />
- <param name='&lt;0-65535&gt;' doc='Subsystem Number (SSN)' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; sccp connections'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='sccp' doc='Signalling Connection Control Part' />
- <param name='connections' doc='Show List of active SCCP connections' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; sccp timers'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='sccp' doc='Signaling Connection Control Part' />
- <param name='timers' doc='Show List of SCCP timers' />
- </params>
- </command>
- <command id='logging enable'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='enable' doc='Enables logging to this vty' />
- </params>
- </command>
- <command id='logging disable'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='disable' doc='Disables logging to this vty' />
- </params>
- </command>
- <command id='logging filter all (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='filter' doc='Filter log messages' />
- <param name='all' doc='Do you want to log all messages?' />
- <param name='0' doc='Only print messages matched by other filters' />
- <param name='1' doc='Bypass filter and print all messages' />
- </params>
- </command>
- <command id='logging color (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='color' doc='Configure color-printing for log messages' />
- <param name='0' doc='Don&apos;t use color for printing messages' />
- <param name='1' doc='Use color for printing messages' />
- </params>
- </command>
- <command id='logging timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp' />
- </params>
- </command>
- <command id='logging print extended-timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='extended-timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
- </params>
- </command>
- <command id='logging print category (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category' doc='Configure log message' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem name' />
- </params>
- </command>
- <command id='logging print category-hex (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category-hex' doc='Configure log message' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
- </params>
- </command>
- <command id='logging print level (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='level' doc='Configure log message' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with the log level name' />
- </params>
- </command>
- <command id='logging print file (0|1|basename) [last]'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='file' doc='Configure log message' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with the source file and line' />
- <param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
- <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
- </params>
- </command>
- <command id='logging set-log-mask MASK'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='set-log-mask' doc='Set the logmask of this logging target' />
- <param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
- </params>
- </command>
- <command id='logging level (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
- <param name='cc' doc='Layer3 Call Control (CC)' />
- <param name='mm' doc='Layer3 Mobility Management (MM)' />
- <param name='rr' doc='Layer3 Radio Resource (RR)' />
- <param name='mncc' doc='MNCC API for Call Control application' />
- <param name='pag' doc='Paging Subsystem' />
- <param name='msc' doc='Mobile Switching Center' />
- <param name='mgcp' doc='Media Gateway Control Protocol' />
- <param name='ho' doc='Hand-Over' />
- <param name='db' doc='Database Layer' />
- <param name='ref' doc='Reference Counting' />
- <param name='ctrl' doc='Control interface' />
- <param name='smpp' doc='SMPP interface for external SMS apps' />
- <param name='ranap' doc='Radio Access Network Application Part Protocol' />
- <param name='vlr' doc='Visitor Location Register' />
- <param name='iucs' doc='Iu-CS Protocol' />
- <param name='bssap' doc='BSSAP Protocol (A Interface)' />
- <param name='lglobal' doc='Library-internal global log family' />
- <param name='llapd' doc='LAPD in libosmogsm' />
- <param name='linp' doc='A-bis Intput Subsystem' />
- <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
- <param name='lmi' doc='A-bis Input Driver for Signalling' />
- <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
- <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
- <param name='lctrl' doc='Control Interface' />
- <param name='lgtp' doc='GPRS GTP library' />
- <param name='lstats' doc='Statistics messages and logging' />
- <param name='lgsup' doc='Generic Subscriber Update Protocol' />
- <param name='loap' doc='Osmocom Authentication Protocol' />
- <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
- <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
- <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
- <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
- <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
- <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='logging level set-all (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='logging level force-all (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='no logging level force-all'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
- </params>
- </command>
- <command id='show logging vty'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='logging' doc='Show current logging configuration' />
- <param name='vty' doc='Show current logging configuration for this vty' />
- </params>
- </command>
- <command id='show alarms'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='alarms' doc='Show current logging configuration' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application&apos;s context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application&apos;s context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- <param name='tree' doc='Display only a specific memory chunk' />
- <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application&apos;s context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- <param name='filter' doc='Filter chunks using regular expression' />
- <param name='REGEXP' doc='Regular expression' />
- </params>
- </command>
- <command id='show stats'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='stats' doc='Show statistical values' />
- </params>
- </command>
- <command id='show stats level (global|peer|subscriber)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='stats' doc='Show statistical values' />
- <param name='level' doc='Set the maximum group level' />
- <param name='global' doc='Show global groups only' />
- <param name='peer' doc='Show global and network peer related groups' />
- <param name='subscriber' doc='Show global, peer, and subscriber groups' />
- </params>
- </command>
- <command id='show asciidoc counters'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='asciidoc' doc='Asciidoc generation' />
- <param name='counters' doc='Generate table of all registered counters' />
- </params>
- </command>
- <command id='show rate-counters'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='rate-counters' doc='Show all rate counters' />
- </params>
- </command>
- <command id='show fsm NAME'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='fsm' doc='Show information about finite state machines' />
- <param name='NAME' doc='Display information about a single named finite state machine' />
- </params>
- </command>
- <command id='show fsm all'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='fsm' doc='Show information about finite state machines' />
- <param name='all' doc='Display a list of all registered finite state machines' />
- </params>
- </command>
- <command id='show fsm-instances NAME'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='fsm-instances' doc='Show information about finite state machine instances' />
- <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />
- </params>
- </command>
- <command id='show fsm-instances all'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='fsm-instances' doc='Show information about finite state machine instances' />
- <param name='all' doc='Display a list of all FSM instances of all finite state machine' />
- </params>
- </command>
- <command id='show subscriber (msisdn|extension|imsi|tmsi|id) ID'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- </params>
- </command>
- <command id='show subscriber cache'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='subscriber' doc='Show information about subscribers' />
- <param name='cache' doc='Display contents of subscriber cache' />
- </params>
- </command>
- <command id='show connection'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='connection' doc='Subscriber Connections' />
- </params>
- </command>
- <command id='show transaction'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='transaction' doc='Transactions' />
- </params>
- </command>
- <command id='sms send pending'>
- <params>
- <param name='sms' doc='SMS related commands' />
- <param name='send' doc='SMS Sending related commands' />
- <param name='pending' doc='Send all pending SMS' />
- </params>
- </command>
- <command id='sms delete expired'>
- <params>
- <param name='sms' doc='SMS related commands' />
- <param name='delete' doc='SMS Database related commands' />
- <param name='expired' doc='Delete all expired SMS' />
- </params>
- </command>
- <command id='subscriber create imsi ID'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='create' doc='Create new subscriber' />
- <param name='imsi' doc='Identify the subscriber by his IMSI' />
- <param name='ID' doc='Identifier for the subscriber' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID sms sender (msisdn|extension|imsi|tmsi|id) SENDER_ID send .LINE'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='sms' doc='SMS Operations' />
- <param name='sender' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='SENDER_ID' doc='Identifier for the subscriber' />
- <param name='send' doc='Send SMS' />
- <param name='.LINE' doc='Actual SMS Text' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID silent-sms sender (msisdn|extension|imsi|tmsi|id) SENDER_ID send .LINE'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='silent-sms' doc='Silent SMS Operations' />
- <param name='sender' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='SENDER_ID' doc='Identifier for the subscriber' />
- <param name='send' doc='Send SMS' />
- <param name='.LINE' doc='Actual SMS Text' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/any|sdcch)'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='silent-call' doc='Silent call operation' />
- <param name='start' doc='Start silent call' />
- <param name='any' doc='Any channel' />
- <param name='tch/f' doc='TCH/F channel' />
- <param name='tch/any' doc='Any TCH channel' />
- <param name='sdcch' doc='SDCCH channel' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID silent-call stop'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='silent-call' doc='Silent call operation' />
- <param name='stop' doc='Stop silent call' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='ussd-notify' doc='Send a USSD notify to the subscriber' />
- <param name='0' doc='Alerting Level 0' />
- <param name='1' doc='Alerting Level 1' />
- <param name='2' doc='Alerting Level 2' />
- <param name='.TEXT' doc='Text of USSD message to send' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />
- <param name='close-loop' doc='Close a TCH Loop inside the MS' />
- <param name='a' doc='Loop Type A' />
- <param name='b' doc='Loop Type B' />
- <param name='c' doc='Loop Type C' />
- <param name='d' doc='Loop Type D' />
- <param name='e' doc='Loop Type E' />
- <param name='f' doc='Loop Type F' />
- <param name='i' doc='Loop Type I' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID ms-test open-loop'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />
- <param name='open-loop' doc='Open a TCH Loop inside the MS' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID paging'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='paging' doc='Issue an empty Paging for the subscriber (for debugging)' />
- </params>
- </command>
- <command id='show statistics'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='statistics' doc='Display network statistics' />
- </params>
- </command>
- <command id='show sms-queue'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='sms-queue' doc='Display SMSqueue statistics' />
- </params>
- </command>
- <command id='logging filter imsi IMSI'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='filter' doc='Filter log messages' />
- <param name='imsi' doc='Filter log messages by IMSI' />
- <param name='IMSI' doc='IMSI to be used as filter' />
- </params>
- </command>
- <command id='show smpp esme'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='smpp' doc='SMPP Interface' />
- <param name='esme' doc='SMPP Extrenal SMS Entity' />
- </params>
- </command>
- </node>
- <node id='enable'>
- <name>enable</name>
- <command id='disable'>
- <params>
- <param name='disable' doc='Turn off privileged mode command' />
- </params>
- </command>
- <command id='configure terminal'>
- <params>
- <param name='configure' doc='Configuration from vty interface' />
- <param name='terminal' doc='Configuration terminal' />
- </params>
- </command>
- <command id='copy running-config startup-config'>
- <params>
- <param name='copy' doc='Copy configuration' />
- <param name='running-config' doc='Copy running config to... ' />
- <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
- </params>
- </command>
- <command id='show startup-config'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='startup-config' doc='Contentes of startup configuration' />
- </params>
- </command>
- <command id='show version'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='version' doc='Displays program version' />
- </params>
- </command>
- <command id='show online-help'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='online-help' doc='Online help' />
- </params>
- </command>
- <command id='terminal length &lt;0-512&gt;'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='length' doc='Set number of lines on a screen' />
- <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
- </params>
- </command>
- <command id='terminal no length'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='length' doc='Set number of lines on a screen' />
- </params>
- </command>
- <command id='who'>
- <params>
- <param name='who' doc='Display who is on vty' />
- </params>
- </command>
- <command id='show history'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='history' doc='Display the session command history' />
- </params>
- </command>
- <command id='terminal monitor'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='monitor' doc='Copy debug output to the current terminal line' />
- </params>
- </command>
- <command id='terminal no monitor'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='monitor' doc='Copy debug output to the current terminal line' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; users'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='users' doc='User Table' />
- </params>
- </command>
- <command id='show cs7 (sua|m3ua|ipa) [&lt;0-65534&gt;]'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='sua' doc='SCCP User Adaptation' />
- <param name='m3ua' doc='MTP3 User Adaptation' />
- <param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
- <param name='[&lt;0-65534&gt;]' doc='Port Number' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; asp'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='asp' doc='Application Server Process (ASP)' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; as (active|all|m3ua|sua)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='as' doc='Application Server (AS)' />
- <param name='active' doc='Display all active ASs' />
- <param name='all' doc='Display all ASs (default)' />
- <param name='m3ua' doc='Display all m3ua ASs' />
- <param name='sua' doc='Display all SUA ASs' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; sccp addressbook'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='sccp' doc='Signalling Connection Control Part' />
- <param name='addressbook' doc='List all SCCP addressbook entries' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; sccp users'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='sccp' doc='Signalling Connection Control Part' />
- <param name='users' doc='Show List of SCCP Users registered' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; sccp ssn &lt;0-65535&gt;'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='sccp' doc='Signalling Connection Control Part' />
- <param name='ssn' doc='Find an SCCP User registered for the given SSN' />
- <param name='&lt;0-65535&gt;' doc='Subsystem Number (SSN)' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; sccp connections'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='sccp' doc='Signalling Connection Control Part' />
- <param name='connections' doc='Show List of active SCCP connections' />
- </params>
- </command>
- <command id='show cs7 instance &lt;0-15&gt; sccp timers'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='An instance of the SS7 stack' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- <param name='sccp' doc='Signaling Connection Control Part' />
- <param name='timers' doc='Show List of SCCP timers' />
- </params>
- </command>
- <command id='logging enable'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='enable' doc='Enables logging to this vty' />
- </params>
- </command>
- <command id='logging disable'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='disable' doc='Disables logging to this vty' />
- </params>
- </command>
- <command id='logging filter all (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='filter' doc='Filter log messages' />
- <param name='all' doc='Do you want to log all messages?' />
- <param name='0' doc='Only print messages matched by other filters' />
- <param name='1' doc='Bypass filter and print all messages' />
- </params>
- </command>
- <command id='logging color (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='color' doc='Configure color-printing for log messages' />
- <param name='0' doc='Don&apos;t use color for printing messages' />
- <param name='1' doc='Use color for printing messages' />
- </params>
- </command>
- <command id='logging timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp' />
- </params>
- </command>
- <command id='logging print extended-timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='extended-timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
- </params>
- </command>
- <command id='logging print category (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category' doc='Configure log message' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem name' />
- </params>
- </command>
- <command id='logging print category-hex (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category-hex' doc='Configure log message' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
- </params>
- </command>
- <command id='logging print level (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='level' doc='Configure log message' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with the log level name' />
- </params>
- </command>
- <command id='logging print file (0|1|basename) [last]'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='file' doc='Configure log message' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with the source file and line' />
- <param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
- <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
- </params>
- </command>
- <command id='logging set-log-mask MASK'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='set-log-mask' doc='Set the logmask of this logging target' />
- <param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
- </params>
- </command>
- <command id='logging level (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
- <param name='cc' doc='Layer3 Call Control (CC)' />
- <param name='mm' doc='Layer3 Mobility Management (MM)' />
- <param name='rr' doc='Layer3 Radio Resource (RR)' />
- <param name='mncc' doc='MNCC API for Call Control application' />
- <param name='pag' doc='Paging Subsystem' />
- <param name='msc' doc='Mobile Switching Center' />
- <param name='mgcp' doc='Media Gateway Control Protocol' />
- <param name='ho' doc='Hand-Over' />
- <param name='db' doc='Database Layer' />
- <param name='ref' doc='Reference Counting' />
- <param name='ctrl' doc='Control interface' />
- <param name='smpp' doc='SMPP interface for external SMS apps' />
- <param name='ranap' doc='Radio Access Network Application Part Protocol' />
- <param name='vlr' doc='Visitor Location Register' />
- <param name='iucs' doc='Iu-CS Protocol' />
- <param name='bssap' doc='BSSAP Protocol (A Interface)' />
- <param name='lglobal' doc='Library-internal global log family' />
- <param name='llapd' doc='LAPD in libosmogsm' />
- <param name='linp' doc='A-bis Intput Subsystem' />
- <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
- <param name='lmi' doc='A-bis Input Driver for Signalling' />
- <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
- <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
- <param name='lctrl' doc='Control Interface' />
- <param name='lgtp' doc='GPRS GTP library' />
- <param name='lstats' doc='Statistics messages and logging' />
- <param name='lgsup' doc='Generic Subscriber Update Protocol' />
- <param name='loap' doc='Osmocom Authentication Protocol' />
- <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
- <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
- <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
- <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
- <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
- <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='logging level set-all (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='logging level force-all (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='no logging level force-all'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
- </params>
- </command>
- <command id='show logging vty'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='logging' doc='Show current logging configuration' />
- <param name='vty' doc='Show current logging configuration for this vty' />
- </params>
- </command>
- <command id='show alarms'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='alarms' doc='Show current logging configuration' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application&apos;s context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application&apos;s context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- <param name='tree' doc='Display only a specific memory chunk' />
- <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application&apos;s context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- <param name='filter' doc='Filter chunks using regular expression' />
- <param name='REGEXP' doc='Regular expression' />
- </params>
- </command>
- <command id='show stats'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='stats' doc='Show statistical values' />
- </params>
- </command>
- <command id='show stats level (global|peer|subscriber)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='stats' doc='Show statistical values' />
- <param name='level' doc='Set the maximum group level' />
- <param name='global' doc='Show global groups only' />
- <param name='peer' doc='Show global and network peer related groups' />
- <param name='subscriber' doc='Show global, peer, and subscriber groups' />
- </params>
- </command>
- <command id='show asciidoc counters'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='asciidoc' doc='Asciidoc generation' />
- <param name='counters' doc='Generate table of all registered counters' />
- </params>
- </command>
- <command id='show rate-counters'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='rate-counters' doc='Show all rate counters' />
- </params>
- </command>
- <command id='show fsm NAME'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='fsm' doc='Show information about finite state machines' />
- <param name='NAME' doc='Display information about a single named finite state machine' />
- </params>
- </command>
- <command id='show fsm all'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='fsm' doc='Show information about finite state machines' />
- <param name='all' doc='Display a list of all registered finite state machines' />
- </params>
- </command>
- <command id='show fsm-instances NAME'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='fsm-instances' doc='Show information about finite state machine instances' />
- <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />
- </params>
- </command>
- <command id='show fsm-instances all'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='fsm-instances' doc='Show information about finite state machine instances' />
- <param name='all' doc='Display a list of all FSM instances of all finite state machine' />
- </params>
- </command>
- <command id='show subscriber (msisdn|extension|imsi|tmsi|id) ID'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- </params>
- </command>
- <command id='show subscriber cache'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='subscriber' doc='Show information about subscribers' />
- <param name='cache' doc='Display contents of subscriber cache' />
- </params>
- </command>
- <command id='show connection'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='connection' doc='Subscriber Connections' />
- </params>
- </command>
- <command id='show transaction'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='transaction' doc='Transactions' />
- </params>
- </command>
- <command id='sms send pending'>
- <params>
- <param name='sms' doc='SMS related commands' />
- <param name='send' doc='SMS Sending related commands' />
- <param name='pending' doc='Send all pending SMS' />
- </params>
- </command>
- <command id='sms delete expired'>
- <params>
- <param name='sms' doc='SMS related commands' />
- <param name='delete' doc='SMS Database related commands' />
- <param name='expired' doc='Delete all expired SMS' />
- </params>
- </command>
- <command id='subscriber create imsi ID'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='create' doc='Create new subscriber' />
- <param name='imsi' doc='Identify the subscriber by his IMSI' />
- <param name='ID' doc='Identifier for the subscriber' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID sms sender (msisdn|extension|imsi|tmsi|id) SENDER_ID send .LINE'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='sms' doc='SMS Operations' />
- <param name='sender' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='SENDER_ID' doc='Identifier for the subscriber' />
- <param name='send' doc='Send SMS' />
- <param name='.LINE' doc='Actual SMS Text' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID silent-sms sender (msisdn|extension|imsi|tmsi|id) SENDER_ID send .LINE'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='silent-sms' doc='Silent SMS Operations' />
- <param name='sender' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='SENDER_ID' doc='Identifier for the subscriber' />
- <param name='send' doc='Send SMS' />
- <param name='.LINE' doc='Actual SMS Text' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/any|sdcch)'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='silent-call' doc='Silent call operation' />
- <param name='start' doc='Start silent call' />
- <param name='any' doc='Any channel' />
- <param name='tch/f' doc='TCH/F channel' />
- <param name='tch/any' doc='Any TCH channel' />
- <param name='sdcch' doc='SDCCH channel' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID silent-call stop'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='silent-call' doc='Silent call operation' />
- <param name='stop' doc='Stop silent call' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='ussd-notify' doc='Send a USSD notify to the subscriber' />
- <param name='0' doc='Alerting Level 0' />
- <param name='1' doc='Alerting Level 1' />
- <param name='2' doc='Alerting Level 2' />
- <param name='.TEXT' doc='Text of USSD message to send' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />
- <param name='close-loop' doc='Close a TCH Loop inside the MS' />
- <param name='a' doc='Loop Type A' />
- <param name='b' doc='Loop Type B' />
- <param name='c' doc='Loop Type C' />
- <param name='d' doc='Loop Type D' />
- <param name='e' doc='Loop Type E' />
- <param name='f' doc='Loop Type F' />
- <param name='i' doc='Loop Type I' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID ms-test open-loop'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />
- <param name='open-loop' doc='Open a TCH Loop inside the MS' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID paging'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='paging' doc='Issue an empty Paging for the subscriber (for debugging)' />
- </params>
- </command>
- <command id='show statistics'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='statistics' doc='Display network statistics' />
- </params>
- </command>
- <command id='show sms-queue'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='sms-queue' doc='Display SMSqueue statistics' />
- </params>
- </command>
- <command id='logging filter imsi IMSI'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='filter' doc='Filter log messages' />
- <param name='imsi' doc='Filter log messages by IMSI' />
- <param name='IMSI' doc='IMSI to be used as filter' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID expire'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='expire' doc='Expire the subscriber Now' />
- </params>
- </command>
- <command id='sms-queue trigger'>
- <params>
- <param name='sms-queue' doc='SMS Queue' />
- <param name='trigger' doc='Trigger sending messages' />
- </params>
- </command>
- <command id='sms-queue max-pending &lt;1-500&gt;'>
- <params>
- <param name='sms-queue' doc='SMS Queue' />
- <param name='max-pending' doc='SMS to deliver in parallel' />
- <param name='&lt;1-500&gt;' doc='Amount' />
- </params>
- </command>
- <command id='sms-queue clear'>
- <params>
- <param name='sms-queue' doc='SMS Queue' />
- <param name='clear' doc='Clear the queue of pending SMS' />
- </params>
- </command>
- <command id='sms-queue max-failure &lt;1-500&gt;'>
- <params>
- <param name='sms-queue' doc='SMS Queue' />
- <param name='max-failure' doc='Maximum amount of delivery failures' />
- <param name='&lt;1-500&gt;' doc='Amount' />
- </params>
- </command>
- <command id='subscriber (msisdn|extension|imsi|tmsi|id) ID sms pending-send'>
- <params>
- <param name='subscriber' doc='Operations on a Subscriber' />
- <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
- <param name='extension' doc='Legacy alias for &apos;msisdn&apos;' />
- <param name='imsi' doc='Identify subscriber by IMSI' />
- <param name='tmsi' doc='Identify subscriber by TMSI' />
- <param name='id' doc='Identify subscriber by database ID' />
- <param name='ID' doc='Identifier for the subscriber' />
- <param name='sms' doc='SMS Operations' />
- <param name='pending-send' doc='Send pending SMS' />
- </params>
- </command>
- <command id='show smpp esme'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='smpp' doc='SMPP Interface' />
- <param name='esme' doc='SMPP Extrenal SMS Entity' />
- </params>
- </command>
- </node>
- <node id='config'>
- <name>config</name>
- <command id='hostname WORD'>
- <params>
- <param name='hostname' doc='Set system&apos;s network name' />
- <param name='WORD' doc='This system&apos;s network name' />
- </params>
- </command>
- <command id='no hostname [HOSTNAME]'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='hostname' doc='Reset system&apos;s network name' />
- <param name='[HOSTNAME]' doc='Host name of this router' />
- </params>
- </command>
- <command id='password (8|) WORD'>
- <params>
- <param name='password' doc='Assign the terminal connection password' />
- <param name='8' doc='Specifies a HIDDEN password will follow' />
- <param name='' doc='dummy string ' />
- <param name='WORD' doc='The HIDDEN line password string' />
- </params>
- </command>
- <command id='password LINE'>
- <params>
- <param name='password' doc='Assign the terminal connection password' />
- <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
- </params>
- </command>
- <command id='enable password (8|) WORD'>
- <params>
- <param name='enable' doc='Modify enable password parameters' />
- <param name='password' doc='Assign the privileged level password' />
- <param name='8' doc='Specifies a HIDDEN password will follow' />
- <param name='' doc='dummy string ' />
- <param name='WORD' doc='The HIDDEN &apos;enable&apos; password string' />
- </params>
- </command>
- <command id='enable password LINE'>
- <params>
- <param name='enable' doc='Modify enable password parameters' />
- <param name='password' doc='Assign the privileged level password' />
- <param name='LINE' doc='The UNENCRYPTED (cleartext) &apos;enable&apos; password' />
- </params>
- </command>
- <command id='no enable password'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='enable' doc='Modify enable password parameters' />
- <param name='password' doc='Assign the privileged level password' />
- </params>
- </command>
- <command id='banner motd default'>
- <params>
- <param name='banner' doc='Set banner string' />
- <param name='motd' doc='Strings for motd' />
- <param name='default' doc='Default string' />
- </params>
- </command>
- <command id='banner motd file [FILE]'>
- <params>
- <param name='banner' doc='Set banner' />
- <param name='motd' doc='Banner for motd' />
- <param name='file' doc='Banner from a file' />
- <param name='[FILE]' doc='Filename' />
- </params>
- </command>
- <command id='no banner motd'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='banner' doc='Set banner string' />
- <param name='motd' doc='Strings for motd' />
- </params>
- </command>
- <command id='service terminal-length &lt;0-512&gt;'>
- <params>
- <param name='service' doc='Set up miscellaneous service' />
- <param name='terminal-length' doc='System wide terminal length configuration' />
- <param name='&lt;0-512&gt;' doc='Number of lines of VTY (0 means no line control)' />
- </params>
- </command>
- <command id='no service terminal-length [&lt;0-512&gt;]'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='service' doc='Set up miscellaneous service' />
- <param name='terminal-length' doc='System wide terminal length configuration' />
- <param name='[&lt;0-512&gt;]' doc='Number of lines of VTY (0 means no line control)' />
- </params>
- </command>
- <command id='line vty'>
- <params>
- <param name='line' doc='Configure a terminal line' />
- <param name='vty' doc='Virtual terminal' />
- </params>
- </command>
- <command id='service advanced-vty'>
- <params>
- <param name='service' doc='Set up miscellaneous service' />
- <param name='advanced-vty' doc='Enable advanced mode vty interface' />
- </params>
- </command>
- <command id='no service advanced-vty'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='service' doc='Set up miscellaneous service' />
- <param name='advanced-vty' doc='Enable advanced mode vty interface' />
- </params>
- </command>
- <command id='show history'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='history' doc='Display the session command history' />
- </params>
- </command>
- <command id='cs7 instance &lt;0-15&gt;'>
- <params>
- <param name='cs7' doc='ITU-T Signaling System 7' />
- <param name='instance' doc='Configure a SS7 Instance' />
- <param name='&lt;0-15&gt;' doc='An instance of the SS7 stack' />
- </params>
- </command>
- <command id='ctrl'>
- <params>
- <param name='ctrl' doc='Configure the Control Interface' />
- </params>
- </command>
- <command id='log stderr'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='stderr' doc='Logging via STDERR of the process' />
- </params>
- </command>
- <command id='no log stderr'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='stderr' doc='Logging via STDERR of the process' />
- </params>
- </command>
- <command id='log file .FILENAME'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='file' doc='Logging to text file' />
- <param name='.FILENAME' doc='Filename' />
- </params>
- </command>
- <command id='no log file .FILENAME'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='file' doc='Logging to text file' />
- <param name='.FILENAME' doc='Filename' />
- </params>
- </command>
- <command id='log alarms &lt;2-32700&gt;'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='alarms' doc='Logging alarms to osmo_strrb' />
- <param name='&lt;2-32700&gt;' doc='Maximum number of messages to log' />
- </params>
- </command>
- <command id='no log alarms'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='alarms' doc='Logging alarms to osmo_strrb' />
- </params>
- </command>
- <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='syslog' doc='Logging via syslog' />
- <param name='authpriv' doc='Security/authorization messages facility' />
- <param name='cron' doc='Clock daemon (cron/at) facility' />
- <param name='daemon' doc='General system daemon facility' />
- <param name='ftp' doc='Ftp daemon facility' />
- <param name='lpr' doc='Line printer facility' />
- <param name='mail' doc='Mail facility' />
- <param name='news' doc='News facility' />
- <param name='user' doc='Generic facility' />
- <param name='uucp' doc='UUCP facility' />
- </params>
- </command>
- <command id='log syslog local &lt;0-7&gt;'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='syslog' doc='Logging via syslog' />
- <param name='local' doc='Syslog LOCAL facility' />
- <param name='&lt;0-7&gt;' doc='Local facility number' />
- </params>
- </command>
- <command id='no log syslog'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='syslog' doc='Logging via syslog' />
- </params>
- </command>
- <command id='log gsmtap [HOSTNAME]'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='gsmtap' doc='Logging via GSMTAP' />
- <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
- </params>
- </command>
- <command id='stats reporter statsd'>
- <params>
- <param name='stats' doc='Configure stats sub-system' />
- <param name='reporter' doc='Configure a stats reporter' />
- <param name='statsd' doc='Report to a STATSD server' />
- </params>
- </command>
- <command id='no stats reporter statsd'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='stats' doc='Configure stats sub-system' />
- <param name='reporter' doc='Configure a stats reporter' />
- <param name='statsd' doc='Report to a STATSD server' />
- </params>
- </command>
- <command id='stats reporter log'>
- <params>
- <param name='stats' doc='Configure stats sub-system' />
- <param name='reporter' doc='Configure a stats reporter' />
- <param name='log' doc='Report to the logger' />
- </params>
- </command>
- <command id='no stats reporter log'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='stats' doc='Configure stats sub-system' />
- <param name='reporter' doc='Configure a stats reporter' />
- <param name='log' doc='Report to the logger' />
- </params>
- </command>
- <command id='stats interval &lt;1-65535&gt;'>
- <params>
- <param name='stats' doc='Configure stats sub-system' />
- <param name='interval' doc='Set the reporting interval' />
- <param name='&lt;1-65535&gt;' doc='Interval in seconds' />
- </params>
- </command>
- <command id='network'>
- <params>
- <param name='network' doc='Configure the GSM network' />
- </params>
- </command>
- <command id='msc'>
- <params>
- <param name='msc' doc='Configure MSC options' />
- </params>
- </command>
- <command id='mncc-int'>
- <params>
- <param name='mncc-int' doc='Configure internal MNCC handler' />
- </params>
- </command>
- <command id='hlr'>
- <params>
- <param name='hlr' doc='Configure connection to the HLR' />
- </params>
- </command>
- <command id='smpp'>
- <params>
- <param name='smpp' doc='Configure SMPP SMS Interface' />
- </params>
- </command>
- </node>
- <node id='config-log'>
- <name>config-log</name>
- <command id='logging filter all (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='filter' doc='Filter log messages' />
- <param name='all' doc='Do you want to log all messages?' />
- <param name='0' doc='Only print messages matched by other filters' />
- <param name='1' doc='Bypass filter and print all messages' />
- </params>
- </command>
- <command id='logging color (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='color' doc='Configure color-printing for log messages' />
- <param name='0' doc='Don&apos;t use color for printing messages' />
- <param name='1' doc='Use color for printing messages' />
- </params>
- </command>
- <command id='logging timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp' />
- </params>
- </command>
- <command id='logging print extended-timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='extended-timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
- </params>
- </command>
- <command id='logging print category (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category' doc='Configure log message' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem name' />
- </params>
- </command>
- <command id='logging print category-hex (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category-hex' doc='Configure log message' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
- </params>
- </command>
- <command id='logging print level (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='level' doc='Configure log message' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with the log level name' />
- </params>
- </command>
- <command id='logging print file (0|1|basename) [last]'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='file' doc='Configure log message' />
- <param name='0' doc='Don&apos;t prefix each log message' />
- <param name='1' doc='Prefix each log message with the source file and line' />
- <param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
- <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
- </params>
- </command>
- <command id='logging level (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
- <param name='cc' doc='Layer3 Call Control (CC)' />
- <param name='mm' doc='Layer3 Mobility Management (MM)' />
- <param name='rr' doc='Layer3 Radio Resource (RR)' />
- <param name='mncc' doc='MNCC API for Call Control application' />
- <param name='pag' doc='Paging Subsystem' />
- <param name='msc' doc='Mobile Switching Center' />
- <param name='mgcp' doc='Media Gateway Control Protocol' />
- <param name='ho' doc='Hand-Over' />
- <param name='db' doc='Database Layer' />
- <param name='ref' doc='Reference Counting' />
- <param name='ctrl' doc='Control interface' />
- <param name='smpp' doc='SMPP interface for external SMS apps' />
- <param name='ranap' doc='Radio Access Network Application Part Protocol' />
- <param name='vlr' doc='Visitor Location Register' />
- <param name='iucs' doc='Iu-CS Protocol' />
- <param name='bssap' doc='BSSAP Protocol (A Interface)' />
- <param name='lglobal' doc='Library-internal global log family' />
- <param name='llapd' doc='LAPD in libosmogsm' />
- <param name='linp' doc='A-bis Intput Subsystem' />
- <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
- <param name='lmi' doc='A-bis Input Driver for Signalling' />
- <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
- <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
- <param name='lctrl' doc='Control Interface' />
- <param name='lgtp' doc='GPRS GTP library' />
- <param name='lstats' doc='Statistics messages and logging' />
- <param name='lgsup' doc='Generic Subscriber Update Protocol' />
- <param name='loap' doc='Osmocom Authentication Protocol' />
- <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
- <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
- <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
- <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
- <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
- <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='logging level set-all (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='logging level force-all (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='no logging level force-all'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
- </params>
- </command>
- <command id='logging filter imsi IMSI'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='filter' doc='Filter log messages' />
- <param name='imsi' doc='Filter log messages by IMSI' />
- <param name='IMSI' doc='IMSI to be used as filter' />
- </params>
- </command>
- </node>
- <node id='config-stats'>
- <name>config-stats</name>
- <command id='local-ip ADDR'>
- <params>
- <param name='local-ip' doc='Set the IP address to which we bind locally' />
- <param name='ADDR' doc='IP Address' />
- </params>
- </command>
- <command id='no local-ip'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='local-ip' doc='Set the IP address to which we bind locally' />
- </params>
- </command>
- <command id='remote-ip ADDR'>
- <params>
- <param name='remote-ip' doc='Set the remote IP address to which we connect' />
- <param name='ADDR' doc='IP Address' />
- </params>
- </command>
- <command id='remote-port &lt;1-65535&gt;'>
- <params>
- <param name='remote-port' doc='Set the remote port to which we connect' />
- <param name='&lt;1-65535&gt;' doc='Remote port number' />
- </params>
- </command>
- <command id='mtu &lt;100-65535&gt;'>
- <params>
- <param name='mtu' doc='Set the maximum packet size' />
- <param name='&lt;100-65535&gt;' doc='Size in byte' />
- </params>
- </command>
- <command id='no mtu'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='mtu' doc='Set the maximum packet size' />
- </params>
- </command>
- <command id='prefix PREFIX'>
- <params>
- <param name='prefix' doc='Set the item name prefix' />
- <param name='PREFIX' doc='The prefix string' />
- </params>
- </command>
- <command id='no prefix'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='prefix' doc='Set the item name prefix' />
- </params>
- </command>
- <command id='level (global|peer|subscriber)'>
- <params>
- <param name='level' doc='Set the maximum group level' />
- <param name='global' doc='Report global groups only' />
- <param name='peer' doc='Report global and network peer related groups' />
- <param name='subscriber' doc='Report global, peer, and subscriber groups' />
- </params>
- </command>
- <command id='enable'>
- <params>
- <param name='enable' doc='Enable the reporter' />
- </params>
- </command>
- <command id='disable'>
- <params>
- <param name='disable' doc='Disable the reporter' />
- </params>
- </command>
- </node>
- <node id='config-line'>
- <name>config-line</name>
- <command id='login'>
- <params>
- <param name='login' doc='Enable password checking' />
- </params>
- </command>
- <command id='no login'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='login' doc='Enable password checking' />
- </params>
- </command>
- <command id='bind A.B.C.D'>
- <params>
- <param name='bind' doc='Accept VTY telnet connections on local interface' />
- <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
- </params>
- </command>
- </node>
- <node id='config-ctrl'>
- <name>config-ctrl</name>
- <command id='bind A.B.C.D'>
- <params>
- <param name='bind' doc='Set bind address to listen for Control connections' />
- <param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' />
- </params>
- </command>
- </node>
- <node id='config-cs7'>
- <name>config-cs7</name>
- <command id='description .TEXT'>
- <params>
- <param name='description' doc='Save human-readable description of the object' />
- <param name='.TEXT' doc='Text until the end of the line' />
- </params>
- </command>
- <command id='network-indicator (international | national | reserved | spare)'>
- <params>
- <param name='network-indicator' doc='Configure the Network Indicator' />
- <param name='international' doc='International Network' />
- <param name='national' doc='National Network' />
- <param name='reserved' doc='Reserved Network' />
- <param name='spare' doc='Spare Network' />
- </params>
- </command>
- <command id='point-code POINT_CODE'>
- <params>
- <param name='point-code' doc='Configure the local Point Code' />
- <param name='POINT_CODE' doc='Point Code' />
- </params>
- </command>
- <command id='point-code format &lt;1-24&gt; [&lt;1-23&gt;] [&lt;1-22&gt;]'>
- <params>
- <param name='point-code' doc='Point Code' />
- <param name='format' doc='Configure Point Code Format' />
- <param name='&lt;1-24&gt;' doc='Length of first PC component' />
- <param name='[&lt;1-23&gt;]' doc='Length of second PC component' />
- <param name='[&lt;1-22&gt;]' doc='Length of third PC component' />
- </params>
- </command>
- <command id='point-code format default'>
- <params>
- <param name='point-code' doc='Point Code' />
- <param name='format' doc='Configure Point Code Format' />
- <param name='default' doc='Default Point Code Format (3.8.3)' />
- </params>
- </command>
- <command id='point-code delimiter (default|dash)'>
- <params>
- <param name='point-code' doc='Point Code' />
- <param name='delimiter' doc='Configure Point Code Delimiter' />
- <param name='default' doc='Use dot as delimiter' />
- <param name='dash' doc='User dash as delimiter' />
- </params>
- </command>
- <command id='xua rkm routing-key-allocation (static-only|dynamic-permitted)'>
- <params>
- <param name='xua' doc='SIGTRAN xxxUA related' />
- <param name='rkm' doc='Routing Key Management' />
- <param name='routing-key-allocation' doc='Routing Key Management Allocation Policy' />
- <param name='static-only' doc='Only static (pre-confgured) Routing Keys permitted' />
- <param name='dynamic-permitted' doc='Dynamically allocate Routing Keys for what ASPs request' />
- </params>
- </command>
- <command id='asp NAME &lt;0-65535&gt; &lt;0-65535&gt; (sua|m3ua|ipa)'>
- <params>
- <param name='asp' doc='Configure Application Server Process' />
- <param name='NAME' doc='Name of ASP' />
- <param name='&lt;0-65535&gt;' doc='Remote SCTP port number' />
- <param name='&lt;0-65535&gt;' doc='Local SCTP port number' />
- <param name='sua' doc='SCCP User Adaptation' />
- <param name='m3ua' doc='MTP3 User Adaptation' />
- <param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
- </params>
- </command>
- <command id='no asp NAME'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='asp' doc='Disable Application Server Process' />
- <param name='NAME' doc='Name of ASP' />
- </params>
- </command>
- <command id='as NAME (sua|m3ua|ipa)'>
- <params>
- <param name='as' doc='Configure an Application Server' />
- <param name='NAME' doc='Name of the Application Server' />
- <param name='sua' doc='SCCP User Adaptation' />
- <param name='m3ua' doc='MTP3 User Adaptation' />
- <param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
- </params>
- </command>
- <command id='no as NAME'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='as' doc='Disable Application Server' />
- <param name='NAME' doc='Name of AS' />
- </params>
- </command>
- <command id='sccp-address NAME'>
- <params>
- <param name='sccp-address' doc='Create/Modify an SCCP addressbook entry' />
- <param name='NAME' doc='Name of the SCCP Address' />
- </params>
- </command>
- <command id='no sccp-address NAME'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='sccp-address' doc='Delete an SCCP addressbook entry' />
- <param name='NAME' doc='Name of the SCCP Address' />
- </params>
- </command>
- <command id='sccp-timer (conn_est|ias|iar|rel|repeat_rel|int|guard|reset|reassembly) &lt;1-999999&gt;'>
- <params>
- <param name='sccp-timer' doc='Configure SCCP timer values, see ITU-T Q.714' />
- <param name='conn_est' doc='Waiting for connection confirm message, 1 to 2 minutes (default: 60)' />
- <param name='ias' doc='Send keep-alive: on an idle connection, delay before sending an Idle Timer message, 5 to 10 minutes (default: 420)' />
- <param name='iar' doc='Receive keep-alive: on an idle connection, delay until considering a connection as stale, 11 to 21 minutes (default: 900)' />
- <param name='rel' doc='Waiting for release complete message, 10 to 20 seconds (default: 10)' />
- <param name='repeat_rel' doc='Waiting for release complete message; or to repeat sending released message after the initial expiry, 10 to 20 seconds (default: 10)' />
- <param name='int' doc='Waiting for release complete message; or to release connection resources, freeze the LRN and alert a maintenance function after the initial expiry, extending to 1 minute (default: 60)' />
- <param name='guard' doc='Waiting to resume normal procedure for temporary connection sections during the restart procedure, 23 to 25 minutes (default: 1380)' />
- <param name='reset' doc='Waiting to release temporary connection section or alert maintenance function after reset request message is sent, 10 to 20 seconds (default: 10)' />
- <param name='reassembly' doc='Waiting to receive all the segments of the remaining segments, single segmented message after receiving the first segment, 10 to 20 seconds (default: 10)' />
- <param name='&lt;1-999999&gt;' doc='Timer value, in seconds' />
- </params>
- </command>
- </node>
- <node id='config-cs7-as'>
- <name>config-cs7-as</name>
- <command id='description .TEXT'>
- <params>
- <param name='description' doc='Save human-readable description of the object' />
- <param name='.TEXT' doc='Text until the end of the line' />
- </params>
- </command>
- <command id='asp NAME'>
- <params>
- <param name='asp' doc='Specify that a given ASP is part of this AS' />
- <param name='NAME' doc='Name of ASP to be added to AS' />
- </params>
- </command>
- <command id='no asp NAME'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='asp' doc='Specify ASP to be removed from this AS' />
- <param name='NAME' doc='Name of ASP to be removed' />
- </params>
- </command>
- <command id='traffic-mode (broadcast | loadshare | roundrobin | override)'>
- <params>
- <param name='traffic-mode' doc='Specifies traffic mode of operation of the ASP within the AS' />
- <param name='broadcast' doc='Broadcast to all ASP within AS' />
- <param name='loadshare' doc='Share Load among all ASP within AS' />
- <param name='roundrobin' doc='Round-Robin between all ASP within AS' />
- <param name='override' doc='Override' />
- </params>
- </command>
- <command id='recovery-timeout &lt;1-2000&gt;'>
- <params>
- <param name='recovery-timeout' doc='Specifies the recovery timeout value in milliseconds' />
- <param name='&lt;1-2000&gt;' doc='Recovery Timeout in Milliseconds' />
- </params>
- </command>
- <command id='qos-class &lt;0-255&gt;'>
- <params>
- <param name='qos-class' doc='Specity QoS Class of AS' />
- <param name='&lt;0-255&gt;' doc='QoS Class of AS' />
- </params>
- </command>
- <command id='routing-key RCONTEXT DPC'>
- <params>
- <param name='routing-key' doc='Define a routing key' />
- <param name='RCONTEXT' doc='Routing context number' />
- <param name='DPC' doc='Destination Point Code' />
- </params>
- </command>
- <command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup)'>
- <params>
- <param name='routing-key' doc='Define a routing key' />
- <param name='RCONTEXT' doc='Routing context number' />
- <param name='DPC' doc='Destination Point Code' />
- <param name='si' doc='Match on Service Indicator' />
- <param name='aal2' doc='ATM Adaption Layer 2' />
- <param name='bicc' doc='Bearer Independent Call Control' />
- <param name='b-isup' doc='Broadband ISDN User Part' />
- <param name='h248' doc='H.248' />
- <param name='isup' doc='ISDN User Part' />
- <param name='sat-isup' doc='Sattelite ISDN User Part' />
- <param name='sccp' doc='Signalling Connection Control Part' />
- <param name='tup' doc='Telephony User Part' />
- </params>
- </command>
- <command id='routing-key RCONTEXT DPC ssn SSN'>
- <params>
- <param name='routing-key' doc='Define a routing key' />
- <param name='RCONTEXT' doc='Routing context number' />
- <param name='DPC' doc='Destination Point Code' />
- <param name='ssn' doc='Match on Sub-System Number' />
- <param name='SSN' doc='Sub-System Number to match on' />
- </params>
- </command>
- <command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup) ssn SSN'>
- <params>
- <param name='routing-key' doc='Define a routing key' />
- <param name='RCONTEXT' doc='Routing context number' />
- <param name='DPC' doc='Destination Point Code' />
- <param name='si' doc='Match on Service Indicator' />
- <param name='aal2' doc='ATM Adaption Layer 2' />
- <param name='bicc' doc='Bearer Independent Call Control' />
- <param name='b-isup' doc='Broadband ISDN User Part' />
- <param name='h248' doc='H.248' />
- <param name='isup' doc='ISDN User Part' />
- <param name='sat-isup' doc='Sattelite ISDN User Part' />
- <param name='sccp' doc='Signalling Connection Control Part' />
- <param name='tup' doc='Telephony User Part' />
- <param name='ssn' doc='Match on Sub-System Number' />
- <param name='SSN' doc='Sub-System Number to match on' />
- </params>
- </command>
- <command id='point-code override dpc PC'>
- <params>
- <param name='point-code' doc='Point Code Specific Features' />
- <param name='override' doc='Override (force) a point-code to hard-coded value' />
- <param name='dpc' doc='Override Source Point Code' />
- <param name='PC' doc='Override Destination Point Code' />
- </params>
- </command>
- </node>
- <node id='config-cs7-asp'>
- <name>config-cs7-asp</name>
- <command id='description .TEXT'>
- <params>
- <param name='description' doc='Save human-readable description of the object' />
- <param name='.TEXT' doc='Text until the end of the line' />
- </params>
- </command>
- <command id='remote-ip A.B.C.D'>
- <params>
- <param name='remote-ip' doc='Specify Remote IP Address of ASP' />
- <param name='A.B.C.D' doc='Remote IP Address of ASP' />
- </params>
- </command>
- <command id='local-ip A.B.C.D'>
- <params>
- <param name='local-ip' doc='Specify Local IP Address from which to contact ASP' />
- <param name='A.B.C.D' doc='Local IP Address from which to contact of ASP' />
- </params>
- </command>
- <command id='qos-class &lt;0-255&gt;'>
- <params>
- <param name='qos-class' doc='Specify QoS Class of ASP' />
- <param name='&lt;0-255&gt;' doc='QoS Class of ASP' />
- </params>
- </command>
- <command id='block'>
- <params>
- <param name='block' doc='Allows a SCTP Association with ASP, but doesn&apos;t let it become active' />
- </params>
- </command>
- <command id='shutdown'>
- <params>
- <param name='shutdown' doc='Terminates SCTP association; New associations will be rejected' />
- </params>
- </command>
- </node>
- <node id='config-cs7-sccpaddr'>
- <name>config-cs7-sccpaddr</name>
- <command id='no point-code'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='point-code' doc='Remove point-code Number' />
- </params>
- </command>
- <command id='no subsystem-number'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='subsystem-number' doc='Remove Subsystem Number' />
- </params>
- </command>
- <command id='no global-title'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='global-title' doc='Remove Global Title' />
- </params>
- </command>
- <command id='routing-indicator (GT|PC|IP)'>
- <params>
- <param name='routing-indicator' doc='Add Routing Indicator' />
- <param name='GT' doc='by global-title' />
- <param name='PC' doc='by point-code' />
- <param name='IP' doc='by ip-address' />
- </params>
- </command>
- <command id='point-code POINT_CODE'>
- <params>
- <param name='point-code' doc='Add point-code Number' />
- <param name='POINT_CODE' doc='PC' />
- </params>
- </command>
- <command id='subsystem-number &lt;0-4294967295&gt;'>
- <params>
- <param name='subsystem-number' doc='Add Subsystem Number' />
- <param name='&lt;0-4294967295&gt;' doc='SSN' />
- </params>
- </command>
- <command id='global-title'>
- <params>
- <param name='global-title' doc='Add/Modify Global Title' />
- </params>
- </command>
- </node>
- <node id='config-cs7-sccpaddr-gt'>
- <name>config-cs7-sccpaddr-gt</name>
- <command id='global-title-indicator &lt;0-15&gt;'>
- <params>
- <param name='global-title-indicator' doc='Set Global Title Indicator' />
- <param name='&lt;0-15&gt;' doc='GTI' />
- </params>
- </command>
- <command id='translation-type &lt;0-255&gt;'>
- <params>
- <param name='translation-type' doc='Set Global Title Translation Type' />
- <param name='&lt;0-255&gt;' doc='TT' />
- </params>
- </command>
- <command id='numbering-plan-indicator &lt;0-15&gt;'>
- <params>
- <param name='numbering-plan-indicator' doc='Set Global Title Numbering Plan Indicator' />
- <param name='&lt;0-15&gt;' doc='NPI' />
- </params>
- </command>
- <command id='nature-of-address-indicator &lt;0-127&gt;'>
- <params>
- <param name='nature-of-address-indicator' doc='Set Global Title Nature of Address Indicator' />
- <param name='&lt;0-127&gt;' doc='NAI' />
- </params>
- </command>
- <command id='digits DIGITS'>
- <params>
- <param name='digits' doc='Set Global Title Digits' />
- <param name='DIGITS' doc='Number digits' />
- </params>
- </command>
- </node>
- <node id='config-net'>
- <name>config-net</name>
- <command id='network country code &lt;1-999&gt;'>
- <params>
- <param name='network' doc='Set the GSM network country code' />
- <param name='country' doc='Country commands' />
- <param name='code' doc='Code commands' />
- <param name='&lt;1-999&gt;' doc='Network Country Code to use' />
- </params>
- </command>
- <command id='mobile network code &lt;0-999&gt;'>
- <params>
- <param name='mobile' doc='Set the GSM mobile network code' />
- <param name='network' doc='Network Commands' />
- <param name='code' doc='Code commands' />
- <param name='&lt;0-999&gt;' doc='Mobile Network Code to use' />
- </params>
- </command>
- <command id='short name NAME'>
- <params>
- <param name='short' doc='Set the short GSM network name' />
- <param name='name' doc='Name Commands' />
- <param name='NAME' doc='Name to use' />
- </params>
- </command>
- <command id='long name NAME'>
- <params>
- <param name='long' doc='Set the long GSM network name' />
- <param name='name' doc='Name Commands' />
- <param name='NAME' doc='Name to use' />
- </params>
- </command>
- <command id='encryption a5 &lt;0-3&gt; [&lt;0-3&gt;] [&lt;0-3&gt;] [&lt;0-3&gt;]'>
- <params>
- <param name='encryption' doc='Encryption options' />
- <param name='a5' doc='GSM A5 Air Interface Encryption' />
- <param name='&lt;0-3&gt;' doc='A5/n Algorithm Number' />
- <param name='[&lt;0-3&gt;]' doc='A5/n Algorithm Number' />
- <param name='[&lt;0-3&gt;]' doc='A5/n Algorithm Number' />
- <param name='[&lt;0-3&gt;]' doc='A5/n Algorithm Number' />
- </params>
- </command>
- <command id='authentication (optional|required)'>
- <params>
- <param name='authentication' doc='Whether to enforce MS authentication in 2G' />
- <param name='optional' doc='Allow MS to attach via 2G BSC without authentication' />
- <param name='required' doc='Always do authentication' />
- </params>
- </command>
- <command id='rrlp mode (none|ms-based|ms-preferred|ass-preferred)'>
- <params>
- <param name='rrlp' doc='Radio Resource Location Protocol' />
- <param name='mode' doc='Set the Radio Resource Location Protocol Mode' />
- <param name='none' doc='Don&apos;t send RRLP request' />
- <param name='ms-based' doc='Request MS-based location' />
- <param name='ms-preferred' doc='Request any location, prefer MS-based' />
- <param name='ass-preferred' doc='Request any location, prefer MS-assisted' />
- </params>
- </command>
- <command id='mm info (0|1)'>
- <params>
- <param name='mm' doc='Mobility Management' />
- <param name='info' doc='Send MM INFO after LOC UPD ACCEPT' />
- <param name='0' doc='Disable' />
- <param name='1' doc='Enable' />
- </params>
- </command>
- <command id='timezone &lt;-19-19&gt; (0|15|30|45)'>
- <params>
- <param name='timezone' doc='Set the Timezone Offset of the network' />
- <param name='&lt;-19-19&gt;' doc='Timezone offset (hours)' />
- <param name='0' doc='Timezone offset (00 minutes)' />
- <param name='15' doc='Timezone offset (15 minutes)' />
- <param name='30' doc='Timezone offset (30 minutes)' />
- <param name='45' doc='Timezone offset (45 minutes)' />
- </params>
- </command>
- <command id='timezone &lt;-19-19&gt; (0|15|30|45) &lt;0-2&gt;'>
- <params>
- <param name='timezone' doc='Set the Timezone Offset of the network' />
- <param name='&lt;-19-19&gt;' doc='Timezone offset (hours)' />
- <param name='0' doc='Timezone offset (00 minutes)' />
- <param name='15' doc='Timezone offset (15 minutes)' />
- <param name='30' doc='Timezone offset (30 minutes)' />
- <param name='45' doc='Timezone offset (45 minutes)' />
- <param name='&lt;0-2&gt;' doc='DST offset (hours)' />
- </params>
- </command>
- <command id='no timezone'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='timezone' doc='Disable network timezone override, use system tz' />
- </params>
- </command>
- <command id='periodic location update &lt;6-1530&gt;'>
- <params>
- <param name='periodic' doc='Periodic Location Updating Interval' />
- <param name='location' doc='Periodic Location Updating Interval' />
- <param name='update' doc='Periodic Location Updating Interval' />
- <param name='&lt;6-1530&gt;' doc='Periodic Location Updating Interval in Minutes' />
- </params>
- </command>
- <command id='no periodic location update'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='periodic' doc='Periodic Location Updating Interval' />
- <param name='location' doc='Periodic Location Updating Interval' />
- <param name='update' doc='Periodic Location Updating Interval' />
- </params>
- </command>
- </node>
- <node id='config-msc'>
- <name>config-msc</name>
- <command id='assign-tmsi'>
- <params>
- <param name='assign-tmsi' doc='Assign TMSI during Location Updating.' />
- </params>
- </command>
- <command id='mncc-guard-timeout &lt;0-255&gt;'>
- <params>
- <param name='mncc-guard-timeout' doc='Set global guard timer for mncc interface activity' />
- <param name='&lt;0-255&gt;' doc='guard timer value (sec.)' />
- </params>
- </command>
- <command id='no assign-tmsi'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='assign-tmsi' doc='Assign TMSI during Location Updating.' />
- </params>
- </command>
- <command id='auth-tuple-max-reuse-count &lt;-1-2147483647&gt;'>
- <params>
- <param name='auth-tuple-max-reuse-count' doc='Configure authentication tuple re-use' />
- <param name='&lt;-1-2147483647&gt;' doc='0 to use each auth tuple at most once (default), &gt;0 to limit re-use, -1 to re-use infinitely (vulnerable!).' />
- </params>
- </command>
- <command id='auth-tuple-reuse-on-error (0|1)'>
- <params>
- <param name='auth-tuple-reuse-on-error' doc='Configure authentication tuple re-use when HLR is not responsive' />
- <param name='0' doc='0 = never re-use auth tuples beyond auth-tuple-max-reuse-count (default)' />
- <param name='1' doc='1 = if the HLR does not deliver new tuples, do re-use already available old ones.' />
- </params>
- </command>
- <command id='cs7-instance-a &lt;0-15&gt;'>
- <params>
- <param name='cs7-instance-a' doc='Set SS7 to be used by the A-Interface.' />
- <param name='&lt;0-15&gt;' doc='SS7 instance reference number' />
- </params>
- </command>
- <command id='cs7-instance-iu &lt;0-15&gt;'>
- <params>
- <param name='cs7-instance-iu' doc='Set SS7 to be used by the Iu-Interface.' />
- <param name='&lt;0-15&gt;' doc='SS7 instance reference number' />
- </params>
- </command>
- <command id='paging response-timer (default|&lt;1-65535&gt;)'>
- <params>
- <param name='paging' doc='Configure Paging' />
- <param name='response-timer' doc='Set Paging timeout, the minimum time to pass between (unsuccessful) Pagings sent towards BSS or RNC' />
- <param name='default' doc='Set to default timeout (10 seconds)' />
- <param name='&lt;1-65535&gt;' doc='Set paging timeout in seconds' />
- </params>
- </command>
- <command id='emergency-call route-to-msisdn MSISDN'>
- <params>
- <param name='emergency-call' doc='Configure Emergency Call Behaviour' />
- <param name='route-to-msisdn' doc='MSISDN to which Emergency Calls are Dispatched' />
- <param name='MSISDN' doc='MSISDN (E.164 Phone Number)' />
- </params>
- </command>
- <command id='mgw local-ip A.B.C.D'>
- <params>
- <param name='mgw' doc='Configure MGCP connection to Media Gateway' />
- <param name='local-ip' doc='local bind to connect to MGW from' />
- <param name='A.B.C.D' doc='local bind IP address' />
- </params>
- </command>
- <command id='mgw local-port &lt;0-65535&gt;'>
- <params>
- <param name='mgw' doc='Configure MGCP connection to Media Gateway' />
- <param name='local-port' doc='local port to connect to MGW from' />
- <param name='&lt;0-65535&gt;' doc='local bind port' />
- </params>
- </command>
- <command id='mgw remote-ip A.B.C.D'>
- <params>
- <param name='mgw' doc='Configure MGCP connection to Media Gateway' />
- <param name='remote-ip' doc='remote IP address to reach the MGW at' />
- <param name='A.B.C.D' doc='remote IP address' />
- </params>
- </command>
- <command id='mgw remote-port &lt;0-65535&gt;'>
- <params>
- <param name='mgw' doc='Configure MGCP connection to Media Gateway' />
- <param name='remote-port' doc='remote port to reach the MGW at' />
- <param name='&lt;0-65535&gt;' doc='remote port' />
- </params>
- </command>
- <command id='mgw endpoint-range &lt;1-65534&gt; &lt;1-65534&gt;'>
- <params>
- <param name='mgw' doc='Configure MGCP connection to Media Gateway' />
- <param name='endpoint-range' doc='usable range of endpoint identifiers' />
- <param name='&lt;1-65534&gt;' doc='set first usable endpoint identifier' />
- <param name='&lt;1-65534&gt;' doc='set last usable endpoint identifier' />
- </params>
- </command>
- <command id='mgw bts-base &lt;0-65534&gt;'>
- <params>
- <param name='mgw' doc='Configure MGCP connection to Media Gateway' />
- <param name='bts-base' doc='First UDP port allocated for the BTS side' />
- <param name='&lt;0-65534&gt;' doc='UDP Port number' />
- </params>
- </command>
- <command id='iu rab-assign-addr-enc (x213|v4raw)'>
- <params>
- <param name='iu' doc='Iu interface protocol options' />
- <param name='rab-assign-addr-enc' doc='Choose RAB Assignment&apos;s Transport Layer Address encoding' />
- <param name='x213' doc='ITU-T X.213 compliant address encoding (default)' />
- <param name='v4raw' doc='32bit length raw IPv4 address (for ip.access nano3G)' />
- </params>
- </command>
- <command id='asn1 debug (1|0)'>
- <params>
- <param name='asn1' doc='ASN.1 settings' />
- <param name='debug' doc='Enable ASN.1 debug messages' />
- <param name='1' doc='Log ASN.1 debug messages to stderr' />
- <param name='0' doc='Do not log ASN.1 debug messages to stderr' />
- </params>
- </command>
- <command id='asn1 xer-print (1|0)'>
- <params>
- <param name='asn1' doc='ASN.1 settings' />
- <param name='xer-print' doc='Log human readable representations of all ASN.1 messages to stderr' />
- <param name='1' doc='Log XML representation of all ASN.1 messages to stderr' />
- <param name='0' doc='Do not log decoded ASN.1 messages to stderr' />
- </params>
- </command>
- </node>
- <node id='config-mncc-int'>
- <name>config-mncc-int</name>
- <command id='default-codec tch-f (fr|efr|amr)'>
- <params>
- <param name='default-codec' doc='Set default codec' />
- <param name='tch-f' doc='Codec for TCH/F' />
- <param name='fr' doc='Full-Rate' />
- <param name='efr' doc='Enhanced Full-Rate' />
- <param name='amr' doc='Adaptive Multi-Rate' />
- </params>
- </command>
- <command id='default-codec tch-h (hr|amr)'>
- <params>
- <param name='default-codec' doc='Set default codec' />
- <param name='tch-h' doc='Codec for TCH/H' />
- <param name='hr' doc='Half-Rate' />
- <param name='amr' doc='Adaptive Multi-Rate' />
- </params>
- </command>
- </node>
- <node id='config-smpp'>
- <name>config-smpp</name>
- <command id='smpp-first'>
- <params>
- <param name='smpp-first' doc='Try SMPP routes before the subscriber DB' />
- </params>
- </command>
- <command id='no smpp-first'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='smpp-first' doc='Try SMPP before routes before the subscriber DB' />
- </params>
- </command>
- <command id='local-tcp-port &lt;1-65535&gt;'>
- <params>
- <param name='local-tcp-port' doc='Set the local TCP port on which we listen for SMPP' />
- <param name='&lt;1-65535&gt;' doc='TCP port number' />
- </params>
- </command>
- <command id='local-tcp-ip A.B.C.D &lt;1-65535&gt;'>
- <params>
- <param name='local-tcp-ip' doc='Set the local IP address and TCP port on which we listen for SMPP' />
- <param name='A.B.C.D' doc='Local IP address' />
- <param name='&lt;1-65535&gt;' doc='TCP port number' />
- </params>
- </command>
- <command id='system-id ID'>
- <params>
- <param name='system-id' doc='Set the System ID of this SMSC' />
- <param name='ID' doc='Alphanumeric SMSC System ID' />
- </params>
- </command>
- <command id='policy (accept-all|closed)'>
- <params>
- <param name='policy' doc='Set the authentication policy of this SMSC' />
- <param name='accept-all' doc='Accept all SMPP connections independeint of system ID / passwd' />
- <param name='closed' doc='Accept only SMPP connections from ESMEs explicitly configured' />
- </params>
- </command>
- <command id='esme NAME'>
- <params>
- <param name='esme' doc='Configure a particular ESME' />
- <param name='NAME' doc='Alphanumeric System ID of the ESME to be configured' />
- </params>
- </command>
- <command id='no esme NAME'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='esme' doc='Remove ESME configuration' />
- <param name='NAME' doc='Alphanumeric System ID of the ESME to be removed' />
- </params>
- </command>
- </node>
- <node id='config-smpp-esme'>
- <name>config-smpp-esme</name>
- <command id='password PASSWORD'>
- <params>
- <param name='password' doc='Set the password for this ESME' />
- <param name='PASSWORD' doc='Alphanumeric password string' />
- </params>
- </command> <command id='no password'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='password' doc='Remove the password for this ESME' />
- </params>
- </command>
- <command id='route prefix (unknown|international|national|network|subscriber|alpha|abbrev) (unknown|isdn|x121|f69|e212|national|private|ermes|ip|wap) PREFIX'>
- <params>
- <param name='route' doc='Configure a route for MO-SMS to be sent to this ESME' />
- <param name='prefix' doc='Prefix-match route' />
- <param name='unknown' doc='Unknown type-of-number' />
- <param name='international' doc='International type-of-number' />
- <param name='national' doc='National type-of-number' />
- <param name='network' doc='Network specific type-of-number' />
- <param name='subscriber' doc='Subscriber type-of-number' />
- <param name='alpha' doc='Alphanumeric type-of-number' />
- <param name='abbrev' doc='Abbreviated type-of-number' />
- <param name='unknown' doc='Unknown numbering plan' />
- <param name='isdn' doc='ISDN (E.164) numbering plan' />
- <param name='x121' doc='X.121 numbering plan' />
- <param name='f69' doc='F.69 numbering plan' />
- <param name='e212' doc='E.212 numbering plan' />
- <param name='national' doc='National numbering plan' />
- <param name='private' doc='Private numbering plan' />
- <param name='ermes' doc='ERMES numbering plan' />
- <param name='ip' doc='IP numbering plan' />
- <param name='wap' doc='WAP numbeing plan' />
- <param name='PREFIX' doc='Destination number prefix' />
- </params>
- </command>
- <command id='no route prefix (unknown|international|national|network|subscriber|alpha|abbrev) (unknown|isdn|x121|f69|e212|national|private|ermes|ip|wap) PREFIX'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='route' doc='Configure a route for MO-SMS to be sent to this ESME' />
- <param name='prefix' doc='Prefix-match route' />
- <param name='unknown' doc='Unknown type-of-number' />
- <param name='international' doc='International type-of-number' />
- <param name='national' doc='National type-of-number' />
- <param name='network' doc='Network specific type-of-number' />
- <param name='subscriber' doc='Subscriber type-of-number' />
- <param name='alpha' doc='Alphanumeric type-of-number' />
- <param name='abbrev' doc='Abbreviated type-of-number' />
- <param name='unknown' doc='Unknown numbering plan' />
- <param name='isdn' doc='ISDN (E.164) numbering plan' />
- <param name='x121' doc='X.121 numbering plan' />
- <param name='f69' doc='F.69 numbering plan' />
- <param name='e212' doc='E.212 numbering plan' />
- <param name='national' doc='National numbering plan' />
- <param name='private' doc='Private numbering plan' />
- <param name='ermes' doc='ERMES numbering plan' />
- <param name='ip' doc='IP numbering plan' />
- <param name='wap' doc='WAP numbeing plan' />
- <param name='PREFIX' doc='Destination number prefix' />
- </params>
- </command>
- <command id='default-route'>
- <params>
- <param name='default-route' doc='Set this ESME as default-route for all SMS to unknown destinations' />
- </params>
- </command>
- <command id='no default-route'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='default-route' doc='Remove this ESME as default-route for all SMS to unknown destinations' />
- </params>
- </command>
- <command id='deliver-src-imsi'>
- <params>
- <param name='deliver-src-imsi' doc='Enable the use of IMSI as source address in DELIVER' />
- </params>
- </command>
- <command id='no deliver-src-imsi'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='deliver-src-imsi' doc='Disable the use of IMSI as source address in DELIVER' />
- </params>
- </command>
- <command id='osmocom-extensions'>
- <params>
- <param name='osmocom-extensions' doc='Enable the use of Osmocom SMPP Extensions for this ESME' />
- </params>
- </command>
- <command id='no osmocom-extensions'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='osmocom-extensions' doc='Disable the use of Osmocom SMPP Extensions for this ESME' />
- </params>
- </command>
- <command id='dcs-transparent'>
- <params>
- <param name='dcs-transparent' doc='Enable the transparent pass-through of TP-DCS to SMPP DataCoding' />
- </params>
- </command>
- <command id='no dcs-transparent'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='dcs-transparent' doc='Disable the transparent pass-through of TP-DCS to SMPP DataCoding' />
- </params>
- </command>
- </node>
- <node id='config-hlr'>
- <name>config-hlr</name>
- <command id='remote-ip A.B.C.D'>
- <params>
- <param name='remote-ip' doc='Remote GSUP address of the HLR' />
- <param name='A.B.C.D' doc='Remote GSUP address (default: 127.0.0.1)' />
- </params>
- </command>
- <command id='remote-port &lt;1-65535&gt;'>
- <params>
- <param name='remote-port' doc='Remote GSUP port of the HLR' />
- <param name='&lt;1-65535&gt;' doc='Remote GSUP port (default: MSC_HLR_REMOTE_PORT_DEFAULT)' />
- </params>
- </command>
- </node>
-</vtydoc>
diff --git a/configure.ac b/configure.ac
index e890b3e..48570a8 100644
--- a/configure.ac
+++ b/configure.ac
@@ -35,7 +35,6 @@ AC_OUTPUT(
OsmoHLR/Makefile
OsmoMGCP/Makefile
OsmoMGW/Makefile
- OsmoMSC/Makefile
OsmoNAT/Makefile
OsmoNITB/Makefile
OsmoPCU/Makefile