aboutsummaryrefslogtreecommitdiffstats
path: root/src/osmo-bsc/bsc_subscriber.c
AgeCommit message (Collapse)AuthorFilesLines
2018-07-28large refactoring: use FSMs for lchans; add inter-BSC HONeels Hofmeyr1-0/+14
Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-06-08cosmetic: bsc_subscr_alloc: log initial getNeels Hofmeyr1-3/+2
Instead of silently setting the use count to 1, instead increment with an explicit bsc_subsct_get(), which then logs the event along with the place that created the subscriber. Change-Id: Ia72f8010b7b2e1ca44e3b005c0f2c05f3eeae8d5
2018-06-07dissolve libbsc: move all to src/osmo-bsc, link .o filesNeels Hofmeyr1-0/+168
Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to allow linking from utils/* and ipaccess/* without pulling in unccessary dependencies. Some utilities use gsm_network and gsm_bts structs, which already include data structures for fairly advanced uses. Move initialization that only osmo-bsc needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so that the leaner tools can use the old gsm_* versions without the need to link everything (e.g. handover and lchan alloc code). In some instances, there need to be stubs if to cut off linking "just before the RSL level" and prevent dependencies from creeping in. - abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is osmo-bsc, the utils are merely concerned with OML, if at all. - paging_flush_bts(): ip.access nanobts models call this when the RSL link is dropped. Only osmo-bsc actually needs to do anything there. - on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related to OML, while this action to take on init would pull in RSL dependencies. utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests implement stubs inline where required. From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/. In order for this to work, the osmo-bsc subdir must be built before the other source trees. (An alternative would be to include the .c files as sources, but that would re-compile them in every source tree. Not a large burden really, but unless linking .o files gives problems, let's have the quicker build.) Minor obvious cleanups creep in with this patch, I will not bother to name them individually now unless code review asks me to. Rationale: 1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc is distracting. 2) Recently, ridiculous linking requirements have made adding new functions cumbersome, because libbsc has started depending on osmo-bsc/*.c implementations: on gscon FSM and bssap functions. For example, neither bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP message composition. It makes no sense to link the entire osmo-bsc to it, nor do we want to keep adding stubs to each linking realm. Change-Id: I36a586726f5818121abe54d25654819fc451d3bf