https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318919 | bbryant | 2011-05-13 14:04:50 -0400 (Fri, 13 May 2011) | 10 lines
This patch fixes an issue with SRTP which makes HOLD/UNHOLD impossible when too
much time has passed between sending audio.
(closes issue #18206)
Reported by: bernhardsi
Patches:
res_srtp_unhold.patch uploaded by bernhards (license 1138)
Tested by: bernhards, notthematrix
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318920 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318868 | rmudgett | 2011-05-13 11:28:26 -0500 (Fri, 13 May 2011) | 19 lines
CDR's are being written immediately on caller hangup.
CDR's are being written immediately on caller hangup. The dialplan is not
able to modify it in the h exten. The h exten in the initial context is
not run before closing CDR's when the bridge is unlinked if a macro is
active and does not have an h exten.
* Make ast_bridge_call() check for an h exten in the current context and
if a macro is active then the initial context. The first h exten found is
then run before closing the CDR.
(closes issue #18212)
Reported by: leearcher
Patches:
issue18212_v1.8.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1206/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318869 f38db490-d61c-443f-a65b-d21fe96a405b
There were some issues where if a simple switch was cancelled and a
new switch started before the first had timed out where the d->exten
would be used for both subchannels. This was bad leading to possible
invalid extensions if some digits had been entered in the abandoned
simple switch and the second one was completed before the first timed
out, or the second would be cancelled because d->exten would be set to
nothing on the time out of the first.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318833 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318783 | rmudgett | 2011-05-12 20:47:05 -0500 (Thu, 12 May 2011) | 14 lines
PRI early media won't ring.
And another way to pass early media. Don't indicate that there is inband
information present, just assume that the B channel is connected.
* Restore clearing the dialing flag Rx squelch unconditionally when a
PROCEEDING message comes in.
(closes issue #19268)
Reported by: tbsky
Patches:
issue19268_v1.8.patch uploaded by rmudgett (license 664)
Tested by: tbsky
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318784 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318671 | alecdavis | 2011-05-13 10:52:08 +1200 (Fri, 13 May 2011) | 30 lines
Fix directed group pickup feature code *8 with pickupsounds enabled
Since 1.6.2, the new pickupsound and pickupfailsound in features.conf cause many issues.
1). chan_sip:handle_request_invite() shouldn't be playing out the fail/success audio, as it has 'netlock' locked.
2). dialplan applications for directed_pickups shouldn't beep.
3). feature code for directed pickup should beep on success/failure if configured.
Created a sip_pickup() thread to handle the pickup and playout the audio, spawned from handle_request_invite.
Moved app_directed:pickup_do() to features:ast_do_pickup().
Functions below, all now use the new ast_do_pickup()
app_directed_pickup.c:
pickup_by_channel()
pickup_by_exten()
pickup_by_mark()
pickup_by_part()
features.c:
ast_pickup_call()
(closes issue #18654)
Reported by: Docent
Patches:
ast_do_pickup_1.8_trunk.diff.txt uploaded by alecdavis (license 585)
Tested by: lmadsen, francesco_r, amilcar, isis242, alecdavis, irroot, rymkus, loloski, rmudgett
Review: https://reviewboard.asterisk.org/r/1185/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318672 f38db490-d61c-443f-a65b-d21fe96a405b
Consolidate the functions and add some debugging info. Allows to be
able to set a substate without explicitly knowing what the state is.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318635 f38db490-d61c-443f-a65b-d21fe96a405b
Add the setsubstate_onhook to complete the initial substate handling
procedures. Added dumpsub(sub, forcehangup) which is the common way of
calling setsubstate_onhook. Dumpsub attempts to activate another sub
after setting the current one onhook.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318600 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r318549 | twilson | 2011-05-11 13:39:48 -0500 (Wed, 11 May 2011) | 27 lines
Merged revisions 318548 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r318548 | twilson | 2011-05-11 12:15:39 -0500 (Wed, 11 May 2011) | 19 lines
Clean up several chan_sip reference leaks
Several situations in the code could lead to peers or sip_pvt references
being leaked. This would cause RTP ports to never be destroyed (leading
to exhaustion of all available RTP ports) and memory leaks.
The original patch for this issue from rgagnon was the result of an
obscene amount of testing and hard work, for which I am very grateful. I
did some cleanup and added a few additional refcount fixes that I found.
(closes issue #17255)
Reported by: kvveltho
Patches:
tag-1.6.2.17-r309252-sip-dos-mem-leak-fix.diff uploaded by rgagnon (license 1202)
Tested by: rgagnon, twilson, wdoekes, loloski
Review: https://reviewboard.asterisk.org/r/1101/
Review: https://reviewboard.asterisk.org/r/1207/
Review: https://reviewboard.asterisk.org/r/1210/
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318551 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318499 | rmudgett | 2011-05-10 18:41:08 -0500 (Tue, 10 May 2011) | 15 lines
Unable to pickup DAHDI/PRI call because call state is reported as DIALING.
The channel state is not updated to RINGING when an ALERTING message is
received. Regression caused when sig_pri.c (also sig_ss7.c) extracted
from chan_dahdi.c.
* Added missing channel state update to RINGING when the
AST_CONTROL_RINGING frame is queued for ISDN and SS7.
(closes issue #19257)
Reported by: alecdavis
Patches:
issue19257_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318500 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r318337 | twilson | 2011-05-09 15:23:15 -0500 (Mon, 09 May 2011) | 18 lines
Merged revisions 318331 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r318331 | twilson | 2011-05-09 15:04:41 -0500 (Mon, 09 May 2011) | 12 lines
Don't offer video to directmedia callee unless caller offered it as well
Make sure that when directmedia is enabled, that video is not offered to the
callee even if it supports it. p->vrtp will not exist since the caller didn't
offer video.
(closes issue #19195)
Reported by: one47
Patches:
sip_cant_add_video_rtp uploaded by one47 (license 23)
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318400 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318351 | rmudgett | 2011-05-09 18:15:32 -0500 (Mon, 09 May 2011) | 6 lines
Remove references to res_features and its export file.
The contents of res/res_features.c was moved to into main/features.c
awhile ago. There is no longer any need for the res/Makefile to reference
res_features or the res_features linker exports file to exist.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318352 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318282 | rmudgett | 2011-05-09 14:07:01 -0500 (Mon, 09 May 2011) | 24 lines
Hangup extension executed twice.
When a user hangs up a call, in certain circumstances, the hangup
extension can end up being executed twice:
1) If a call is bridged and the 'h' extension executes the Hangup
application, then the 'h' extension will be executed twice.
2) If a call is bridged within a macro (Dial or Queue), it has its own 'h'
extension, the main context also has an 'h' extension, and the macro 'h'
extension executes the Hangup application, then both 'h' extensions will
be executed.
* Revert originally commited fix for #16106 and just set
AST_FLAG_BRIDGE_HANGUP_RUN unconditionally in ast_bridge_call(). The
bridge code just executed an 'h' extension so the main PBX loop does not
need to execute one as well.
(issue #16106)
Reported by: ajohnson
(issue #16548)
Reported by: hajekd
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318283 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r318231 | rmudgett | 2011-05-09 11:57:18 -0500 (Mon, 09 May 2011) | 41 lines
Don't get early media for ISDN on outgoing calls.
It looks to be a long-standing misinterpretation of the progress indicator
ie values:
1 - Call is not end-to-end ISDN; further call progress information may be
available in-band.
8 - In-band information or an appropriate pattern is now available.
Only value 8 is handled by chan_dahdi/sig_pri. The 1 value is not handled
as early media probably because the meaning of the second half of it's
description was overlooked.
* Test to see if either PRI_PROG_CALL_NOT_E2E_ISDN(1) or
PRI_PROG_INBAND_AVAILABLE(8) bits are set to open the media path.
(closes issue #18868)
Reported by: isrl
Patches:
issue18868_19246_v1.8.patch uploaded by rmudgett (license 664)
Tested by: satish_lx
..........
No inband progress on PRI_EVENT_RINGING even if inband flag set.
My ISDN-PRI provider sends an ALERTING with "Inband information or
appropriate pattern now available", but Asterisk only generates and passes
the RING to the SIP extension, not the inband message. Unfortunately, the
inband message is not a ringback tone but a prompt that says the number is
not in service. The SIP extension then hears two rings and the call is
hungup which confuses the caller.
* Post an AST_CONTROL_PROGRESS as well as opening the media path if inband
audio is indicated with an ALERTING message.
(closes issue #19246)
Reported by: cristiandimache
Patches:
issue19246_v1.8.patch uploaded by rmudgett (license 664)
Tested by: cristiandimache
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318232 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318148 | jrose | 2011-05-09 09:18:14 -0500 (Mon, 09 May 2011) | 4 lines
Documenting an observed behavior of features in features.conf. Since parkinglots use an
integer for the parkinglot extensions, leading zeros specified in the configuration file
are ignored.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318162 f38db490-d61c-443f-a65b-d21fe96a405b
If a call is made to a line that already has a call and the device is
offhook (ie activeish call), the call is set to CALLWAIT rather than RINGIN.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@318106 f38db490-d61c-443f-a65b-d21fe96a405b
Long time coming, finally moving the hookstate from line to device.
This may fix some issues where a device has multiple lines. Previously
we had to run through all lines on a device to see if it was actually
onhook or not.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317996 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317969 | russell | 2011-05-06 16:49:01 -0500 (Fri, 06 May 2011) | 10 lines
Use the right variable to print the time in a debug message.
The original patch also increased some buffer sizes, but that was already
done in this version.
(closes issue #17034)
Reported by: sysreq
Patches:
asterisk-issue-17034.patch uploaded by sysreq (license 1009)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317970 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317867 | russell | 2011-05-06 15:01:16 -0500 (Fri, 06 May 2011) | 10 lines
chan_sip: Destroy variables on a sip_pvt before copying vars from the sip_peer.
Don't duplicate variables on the sip_pvt. Just reset the variable list each
time.
(closes issue #19202)
Reported by: wdoekes
Patches:
issue19202_destroy_challenged_invite_chanvars.patch uploaded by wdoekes (license 717)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317868 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317865 | russell | 2011-05-06 14:46:49 -0500 (Fri, 06 May 2011) | 11 lines
chan_sip: fix a deadlock in check_rtp_timeout.
Don't block doing silly deadlock avoidance. Just return and try again later.
The funciton gets called often enough that it's fine. Also, this change was
already made in trunk.
(closes issue #18791)
Reported by: irroot
Patches:
chan_sip.rtptimeout.patch uploaded by irroot (license 52)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317866 f38db490-d61c-443f-a65b-d21fe96a405b
........
r317861 | russell | 2011-05-06 14:35:00 -0500 (Fri, 06 May 2011) | 11 lines
URI encode less characters in the RPID and Contact headers.
If this change causes any problems, we will need to backport the more extensive
uri encoding and decoding handling changes that are in trunk/1.10.
(closes issue #18686)
Reported by: wolfgang
Patches:
quick-and-dirty.patch uploaded by wdoekes (license 717)
Tested by: wdoekes, devellow, wolfgang, mav3rick
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317862 f38db490-d61c-443f-a65b-d21fe96a405b
........
r317858 | mnicholson | 2011-05-06 14:31:50 -0500 (Fri, 06 May 2011) | 6 lines
pbx_lua autoservice fixes
Don't start an autoservice in pbx_lua if pbx_lua already started one and don't
stop one if we didn't start one. Also start and stop the autoservice when
transferring control from and to the pbx.
........
This change is already implemented in trunk.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317860 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317837 | russell | 2011-05-06 14:24:11 -0500 (Fri, 06 May 2011) | 11 lines
Fix a crash in the MySQL() application.
This code was not handling channel datastores safely. The channel
must be locked.
(closes issue #17964)
Reported by: wuwu
Patches:
issue17964_addon_1.6.2_svn.patch uploaded by seanbright (license 71)
Tested by: wuwu
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317843 f38db490-d61c-443f-a65b-d21fe96a405b
automatically stopped when applications are executed, so this shouldn't cause
any problems.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317806 f38db490-d61c-443f-a65b-d21fe96a405b
Make autoservice_start() and autoservice_stop() return nothing. Also check if
the autoservice flag is set before starting or stopping the autoservice and
stop and start the autoservice when returning control to and getting control
from the pbx engine.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317803 f38db490-d61c-443f-a65b-d21fe96a405b
This code will actually detect any dialplan jump from any application that
calls ast_explicit_goto(). This change is only being done in trunk as it may
change the way some dialplans execute.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317721 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317670 | rmudgett | 2011-05-06 11:19:18 -0500 (Fri, 06 May 2011) | 22 lines
Fix SIP connected line updates.
This patch fixes a couple SIP connected line update problems:
1) The connected line needs to be updated when the initial INVITE is sent
if there is a peer callerid configured. Previously, the connected line
information did not get reported until the call was connected so SIP could
not report connected line information in ringing or progress messages.
2) The connected line should not be updated on initial connect if there is
no connected line information. Previously, all it did was wipe out any
default preset CONNECTEDLINE information set by the dialplan with empty
strings.
(closes issue #18367)
Reported by: GeorgeKonopacki
Patches:
issue18367_v1.8.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1199/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@317671 f38db490-d61c-443f-a65b-d21fe96a405b
bbryant