https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321528 | may | 2011-06-01 14:40:19 +0400 (Wed, 01 Jun 2011) | 14 lines
Fix double alerting, add forced alerting before answer
Fix double alerting (it wasn't fixed here by issue #18542)
Add forced alerting before connect (if it wasn't before)
Try to send all packets from outgoing queue rather than one only
Call goes into clearing state when disconnect command is received
(closes issue #19361)
Reported by: vmikhelson
Patches:
issue19361-3.patch uploaded by may213 (license 454)
Tested by: vmikhelson
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@321529 f38db490-d61c-443f-a65b-d21fe96a405b
IPv6 support for ooh323,
bindaddr, peers and users ip can be IPv4 or IPv6 addr
correction for multi-homed mode (0.0.0.0 or :: bindaddr)
can work in dual 6/4 mode with :: bindaddr
gatekeeper mode isn't supported in v6 mode while
(issue #18278)
Reported by: may213
Patches:
ipv6-ooh323.patch uploaded by may213 (license 454)
Review: https://reviewboard.asterisk.org/r/1004/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@313482 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.8
(closes issue #18693)
........
r310734 | may | 2011-03-15 00:45:53 +0300 (Tue, 15 Mar 2011) | 12 lines
Introduce t.38 parameters control functionality not full but enough for
Send/RcvFax support
Introduce t.38 controls between asterisk core and channel/proto layers.
Not all parameters are transferred from proto layers but *Fax apps
tested and work ok.
(issue #18693)
Reported by: benngard2
Patches:
issue-18693.patch uploaded by may213 (license 454)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@310735 f38db490-d61c-443f-a65b-d21fe96a405b
small fixes.
Interpret remote side H.225 version.
Corrections for H.323v2 endpoints:
don't start TCS and MSD before connect,
don't start TCS and MSD by accepting H.245 connection,
start TCS and MSD by StartH245 facility message.
Other fixes:
fix non zeroended remoteDisplayName issue, small fixes in call clearing
by closing H.245 connection, tcp keepalive introduced on TCP
connections (now is hardcoded, will be configurable in the future),
don't force H.245tunneling if FastStart is active, don't send Alerting
singal more than once per call.
(closes issue #18542)
Reported by: vmikhelson
Patches:
issue18542-final-3.patch uploaded by may213 (license 454)
Tested by: vmikhelson
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@307396 f38db490-d61c-443f-a65b-d21fe96a405b
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@306010 f38db490-d61c-443f-a65b-d21fe96a405b
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@276347 f38db490-d61c-443f-a65b-d21fe96a405b
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@274783 f38db490-d61c-443f-a65b-d21fe96a405b
added response to roundtrip delay requests from opposite side
added roundtrip delay request sending to opposite side after answer,
added options for sending request (interval between request and
count of unreplied requests before forced call hangup)
(closes issue #16976)
Reported by: vmikhelson
Patches:
rtdr-1.6.0-2.patch uploaded by may213 (license 454)
Tested by: vmikhelson, may213
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@252277 f38db490-d61c-443f-a65b-d21fe96a405b
This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@252089 f38db490-d61c-443f-a65b-d21fe96a405b
incorrect q.931 message order filtered on incoming calls (first msg must be setup,
next must be not setup)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@242645 f38db490-d61c-443f-a65b-d21fe96a405b
Fixes a crash on Solaris.
(closes issue #16572)
Reported by: crjw
Patches:
frame_changes.patch uploaded by crjw (license 963)
Plus several others found and fixed by me
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@239074 f38db490-d61c-443f-a65b-d21fe96a405b
In the process of swapping ULAW to a place in the extended codec space, we
found several unhandled cases, where a 32-bit integer was still being used to
handle a codec field. Most of these have been fixed with this commit, although
there is at least one case (codec_dahdi) which depends upon outside headers to
be altered before a conversion can be made.
(Fixes AST-278, SWP-459)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@231850 f38db490-d61c-443f-a65b-d21fe96a405b
All addons modules should be disabled by default, requiring the
user to turn them on if desired. After all, these are addons we're
talking about here.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@228659 f38db490-d61c-443f-a65b-d21fe96a405b
Many architectural and functional changes.
Main changes are threading model chanes (many thread in ooh323 stack
instead of one), modifications and improvements in signalling part,
additional codecs support (726, speex), t38 mode support.
This module tested and used in production environment.
(closes issue #15285)
Reported by: may213
Tested by: sles, c0w, OrNix
Review: https://reviewboard.asterisk.org/r/324/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@227898 f38db490-d61c-443f-a65b-d21fe96a405b
Someone asked yesterday, "is there a good reason why we can't just put these
modules in Asterisk?". After a brief discussion, as long as the modules are
clearly set aside in their own directory and not enabled by default, it is
perfectly fine.
For more information about why a module goes in addons, see README-addons.txt.
chan_ooh323 does not currently compile as it is behind some trunk API updates.
However, it will not build by default, so it should be okay for now.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@204413 f38db490-d61c-443f-a65b-d21fe96a405b
lmadsen